Sergey Burian
Sergey Burian has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Mykolay Pechenik
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
4 shared publications - Hanna Zemlianukhina
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
3 shared publications - Mykola Pushkar
Department of Automation of Electromechanical Systems and Electric Drive, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
3 shared publications - Galyna Mikhnenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications O.S. Tcharniak
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”,KyivUkraine
2 shared publicationsV.V. Mykhailenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”,KyivUkraine
2 shared publications
Latest Publications
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6)
INVESTIGATION OF THE OPERATION MODES OF THE BELT-ROPE CONVEYOR ELECTROMECHANICAL SYSTEM WITH VECTOR-CONTROLLED INDUCTION ELECTRIC MOTORS
Continuous transport systems are the most promising type of movement of loose and artificial materials, have high productivity, technical and economic indicators and are widely used in world practice as main conveyors for the coal and mining industry. A special place in continuous transport is occupied by belt-rope conveyors, which are capable of transporting cargo over a distance of more than 30 km in one stop. As a rule, these main conveyors do not provide for the adjustment of movement parameters, the start is carried out using soft start systems. At the same time, such systems have high requirements for the parameters of dynamic modes of operation, the accuracy of working out the given movement program and the level of energy efficiency. The paper proposes a modern electric drive system using vector-controlled induction electric motors. The structure of the electromechanical system is given. A mathematical model of the electromechanical system was built using known methods. As part of the “MATLAB” Simulink application program package, a model for the investigation of dynamic modes of conveyor operation was obtained. On a specific example, a research of dynamic and static modes of conveyor operation with static load and the speed of movement variations of the traction element was carried out. Studies of the accuracy of working out the given law of motion showed that the maximum dynamic error in terms of speed and current is worked out in a time of up to 0.06 s. The maximum level of its amplitude does not exceed 0.33% of the constant speed of movement, which does not cause oscillatory processes in the conveyor and ensures stable operation of the electromechanical system. Investigation of the electromechanical system energy characteristics was conducted. Losses of active power do not exceed 12.5% of the consumed in the entire range of variation of the static load and speed of the traction element. Recommendations for the use of electromechanical systems with vector-controlled induction electric motors in belt-rope conveyors have been formulated.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6)
INVESTIGATION OF THE OPERATION MODES OF THE BELT-ROPE CONVEYOR ELECTROMECHANICAL SYSTEM WITH VECTOR-CONTROLLED INDUCTION ELECTRIC MOTORS
Continuous transport systems are the most promising type of movement of loose and artificial materials, have high productivity, technical and economic indicators and are widely used in world practice as main conveyors for the coal and mining industry. A special place in continuous transport is occupied by belt-rope conveyors, which are capable of transporting cargo over a distance of more than 30 km in one stop. As a rule, these main conveyors do not provide for the adjustment of movement parameters, the start is carried out using soft start systems. At the same time, such systems have high requirements for the parameters of dynamic modes of operation, the accuracy of working out the given movement program and the level of energy efficiency. The paper proposes a modern electric drive system using vector-controlled induction electric motors. The structure of the electromechanical system is given. A mathematical model of the electromechanical system was built using known methods. As part of the “MATLAB” Simulink application program package, a model for the investigation of dynamic modes of conveyor operation was obtained. On a specific example, a research of dynamic and static modes of conveyor operation with static load and the speed of movement variations of the traction element was carried out. Studies of the accuracy of working out the given law of motion showed that the maximum dynamic error in terms of speed and current is worked out in a time of up to 0.06 s. The maximum level of its amplitude does not exceed 0.33% of the constant speed of movement, which does not cause oscillatory processes in the conveyor and ensures stable operation of the electromechanical system. Investigation of the electromechanical system energy characteristics was conducted. Losses of active power do not exceed 12.5% of the consumed in the entire range of variation of the static load and speed of the traction element. Recommendations for the use of electromechanical systems with vector-controlled induction electric motors in belt-rope conveyors have been formulated.
- Open Access
- 18 August 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (5) , 77-81
INVESTIGATION OF ENERGY EFFICIENCY OF WATER SUPPLY SYSTEM WHEN POWERED BY AN ALTERNATIVE ENERGY SOURCE
The nature of the efficiency change in pump systems powered by an alternative source of electricity in conditions of a given pressure stabilization is investigated. An electromechanical water supply system powered by an alternative energy source using a static compensator (STATCOM) is considered. The observer of energy efficiency of the pump installation based on theory of artificial neural networks, which training occurs on the basis of static characteristics of the unit, is constructed. The results and analysis of investigations of the efficiency level changes during a typical daily cycle of water consumption are shown. References 12, figure 5.
- 18 August 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (5) , 77-81
Open AccessINVESTIGATION OF ENERGY EFFICIENCY OF WATER SUPPLY SYSTEM WHEN POWERED BY AN ALTERNATIVE ENERGY SOURCE
The nature of the efficiency change in pump systems powered by an alternative source of electricity in conditions of a given pressure stabilization is investigated. An electromechanical water supply system powered by an alternative energy source using a static compensator (STATCOM) is considered. The observer of energy efficiency of the pump installation based on theory of artificial neural networks, which training occurs on the basis of static characteristics of the unit, is constructed. The results and analysis of investigations of the efficiency level changes during a typical daily cycle of water consumption are shown. References 12, figure 5.
- Open Access
- 13 April 2022
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 1(68),p. 37-42
ДОСЛІДЖЕННЯ РЕЖИМІВ РОБОТИ ЕЛЕКТРОМЕХАНІЧНОЇ СИСТЕМИ ЛІФТОВОЇ ПІДЙОМНОЇ УСТАНОВКИ ПРИ ВИКОРИСТАННІ ВЕКТОРНО КЕРОВАНОГО АСИНХРОННОГО ЕЛЕКТРОДВИГУНА
Ліфтові підйомні установки є одним з основних видів вертикального транспорту людей і вантажів в адміністративних та жилих будівлях. При їх проектуванні та експлуатації до електромеханічних систем пред’являється ряд вимог що стосуються безпеки експлуатації і рівня енергетичної ефек-тивності механізму в цілому. Задача дослідження полягає в забезпеченні необхідної за умовами Правил безпеки, точності відпрацювання заданого закону руху кабіни підйомної установки в межах робочого циклу. Одним з напрямів вирішення даної задачі є використання нових сучасних систем електропривода серед яких одним з найбільш перспективних являється електромеханічна система з використанням векторно керованого асинхронного електродвигуна. На прикладі конкретної ліфтової підйомної установки в межах пакета прикладних програм «MATLAB» розроблена модель електромеханічної системи для виконання досліджень її статичних та динамічних режимів роботи. Дослідження проведено при використанні заданої діаграми швидкості при відсутності періоду дотягування. На базі аналізу результатів досліджень точності позиціонування підйомної установки та її енергетичних показників обґрунтована доцільність використання електромеханічної системи ліфтової підйомної установки з векторним керуванням. Отриманий рівень точності відпрацювання заданої діаграми руху підйомної установки дозволяє виключити з загального алгоритму руху період дотягування, що в свою чергу призводить до зниження рівня капітальних та експлуатаційних затрат, а також до підвищення рівня продуктивності механізму в цілому. Бібл. 15, рис. 8.
- 13 April 2022
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 1(68),p. 37-42
Open AccessДОСЛІДЖЕННЯ РЕЖИМІВ РОБОТИ ЕЛЕКТРОМЕХАНІЧНОЇ СИСТЕМИ ЛІФТОВОЇ ПІДЙОМНОЇ УСТАНОВКИ ПРИ ВИКОРИСТАННІ ВЕКТОРНО КЕРОВАНОГО АСИНХРОННОГО ЕЛЕКТРОДВИГУНА
Ліфтові підйомні установки є одним з основних видів вертикального транспорту людей і вантажів в адміністративних та жилих будівлях. При їх проектуванні та експлуатації до електромеханічних систем пред’являється ряд вимог що стосуються безпеки експлуатації і рівня енергетичної ефек-тивності механізму в цілому. Задача дослідження полягає в забезпеченні необхідної за умовами Правил безпеки, точності відпрацювання заданого закону руху кабіни підйомної установки в межах робочого циклу. Одним з напрямів вирішення даної задачі є використання нових сучасних систем електропривода серед яких одним з найбільш перспективних являється електромеханічна система з використанням векторно керованого асинхронного електродвигуна. На прикладі конкретної ліфтової підйомної установки в межах пакета прикладних програм «MATLAB» розроблена модель електромеханічної системи для виконання досліджень її статичних та динамічних режимів роботи. Дослідження проведено при використанні заданої діаграми швидкості при відсутності періоду дотягування. На базі аналізу результатів досліджень точності позиціонування підйомної установки та її енергетичних показників обґрунтована доцільність використання електромеханічної системи ліфтової підйомної установки з векторним керуванням. Отриманий рівень точності відпрацювання заданої діаграми руху підйомної установки дозволяє виключити з загального алгоритму руху період дотягування, що в свою чергу призводить до зниження рівня капітальних та експлуатаційних затрат, а також до підвищення рівня продуктивності механізму в цілому. Бібл. 15, рис. 8.
- Open Access
- 19 May 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- Vol. 2021 (58) , 39-43
ANALYSIS OF THE OPERATING MODES OF THE SUSPENDED CABLE CAR ELECTRIC DRIVE USING THE VECTOR CONTROL SYSTEM
Continuous transport systems, including rope conveyors designed to move people and goods, are subject to very strict safety and energy efficiency requirements. As a rule, suspended cableways in operation have an unregulated electric drive with a smooth start system. Among the ways to meet these requirements is the use of modern regulated electric drives. The electromechanical system with a vector-controlled asynchronous electric motor is considered in the work. Based on the obtained model, within the framework of the MATLAB / Simulink application package, an investigation of the dynamic characteristics of the cableway electric drive was carried out. An analysis of the nature of the distribution of dynamic error in terms of speed and energy losses depending on the load and speed of movement of the rope traction element of the transport system is given. The results presented in the article make it possible to choose rational electric drives for continuous transport systems with rope traction elements. References 5, figures 5, table.
- 19 May 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- Vol. 2021 (58) , 39-43
Open AccessANALYSIS OF THE OPERATING MODES OF THE SUSPENDED CABLE CAR ELECTRIC DRIVE USING THE VECTOR CONTROL SYSTEM
Continuous transport systems, including rope conveyors designed to move people and goods, are subject to very strict safety and energy efficiency requirements. As a rule, suspended cableways in operation have an unregulated electric drive with a smooth start system. Among the ways to meet these requirements is the use of modern regulated electric drives. The electromechanical system with a vector-controlled asynchronous electric motor is considered in the work. Based on the obtained model, within the framework of the MATLAB / Simulink application package, an investigation of the dynamic characteristics of the cableway electric drive was carried out. An analysis of the nature of the distribution of dynamic error in terms of speed and energy losses depending on the load and speed of movement of the rope traction element of the transport system is given. The results presented in the article make it possible to choose rational electric drives for continuous transport systems with rope traction elements. References 5, figures 5, table.
- Open Access
- 16 January 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2020 (1) , 71-77
ENERGY-EFFICIENT CONTROL OF PUMP UNITS BASED ON NEURAL-NETWORK PARAMETER OBSERVER
Joomla! - the dynamic portal engine and content management system
- 16 January 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2020 (1) , 71-77
Open AccessENERGY-EFFICIENT CONTROL OF PUMP UNITS BASED ON NEURAL-NETWORK PARAMETER OBSERVER
Joomla! - the dynamic portal engine and content management system
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 218-221
Study of AC Pulse Converters with Active and Active-Inductive Load
The paper deals with the analysis of AC pulse converters with active and active-inductive load. The mathematical model for the analysis of electromagnetic processes in the semiconductor converter with pulse-width regulation of the output voltage has been developed. The problem of using the method of multiparametric modulating functions has been solved during the research.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 218-221
Study of AC Pulse Converters with Active and Active-Inductive Load
The paper deals with the analysis of AC pulse converters with active and active-inductive load. The mathematical model for the analysis of electromagnetic processes in the semiconductor converter with pulse-width regulation of the output voltage has been developed. The problem of using the method of multiparametric modulating functions has been solved during the research.
- 28 August 2019
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- No. 53,p. 75-79
TRANSIENT PROCESSES IN ELECTRIC CIRCUITS OF SEMICONDUCTOR CONVERTERS WITH NINE ZONED REGULATION OF VOLTAGE ON ELECTROTECHNOLOGICAL LOAD
Інститут електродинаміки Національної академії наук України
- 28 August 2019
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- No. 53,p. 75-79
TRANSIENT PROCESSES IN ELECTRIC CIRCUITS OF SEMICONDUCTOR CONVERTERS WITH NINE ZONED REGULATION OF VOLTAGE ON ELECTROTECHNOLOGICAL LOAD
Інститут електродинаміки Національної академії наук України
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 43-46
Study of Electromagnetic Processes in the Twelve-Pulse Converter with Eight-Zone Regulation of Output Voltage and Electromechanical Load
The paper presents the study of electromagnetic processes in an electric circuit with the semiconductor converter. The mathematical model for the study of electromagnetic processes in the semiconductor converter with pulse-width regulation of the output voltage has been developed.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 43-46
Study of Electromagnetic Processes in the Twelve-Pulse Converter with Eight-Zone Regulation of Output Voltage and Electromechanical Load
The paper presents the study of electromagnetic processes in an electric circuit with the semiconductor converter. The mathematical model for the study of electromagnetic processes in the semiconductor converter with pulse-width regulation of the output voltage has been developed.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 560-563
Investigation the maximal values of flux and stator current of autonomous induction generator
This paper deals with the investigation of flux and stator current maximal values of autonomous induction generator with DC link voltage and rotor angular speed below the rated values. The dependence of the maximum flux from DC link voltage is analytically determined based on the stator circuit electrical equilibrium equations in a steady state. The maximum value of the stator current active component is determined by the balance of power in autonomous generator. The simulation results of excitation processes of the generator and the charge of capacitor in the DC link confirmed the results of analytical studies. Presented results can be used in the design of startup algorithms of autonomous generation systems based on induction machines.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 560-563
Investigation the maximal values of flux and stator current of autonomous induction generator
This paper deals with the investigation of flux and stator current maximal values of autonomous induction generator with DC link voltage and rotor angular speed below the rated values. The dependence of the maximum flux from DC link voltage is analytically determined based on the stator circuit electrical equilibrium equations in a steady state. The maximum value of the stator current active component is determined by the balance of power in autonomous generator. The simulation results of excitation processes of the generator and the charge of capacitor in the DC link confirmed the results of analytical studies. Presented results can be used in the design of startup algorithms of autonomous generation systems based on induction machines.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 365-368
Mathematical model of the semiconductor converter with twelve-zone regulation of output voltage
The analysis of electromagnetic processes in an electric circuit with the semiconductor converter is presented in the paper. The mathematical model for the analysis of electromagnetic processes in the semiconductor converter with power width regulation of the output voltage has been created. The problem of using the method of multiple parameter modulating function has been solved in the research work.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 365-368
Mathematical model of the semiconductor converter with twelve-zone regulation of output voltage
The analysis of electromagnetic processes in an electric circuit with the semiconductor converter is presented in the paper. The mathematical model for the analysis of electromagnetic processes in the semiconductor converter with power width regulation of the output voltage has been created. The problem of using the method of multiple parameter modulating function has been solved in the research work.