Brennan Goddard
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Brennan Goddard has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Verena Kain
University of Bonn CERN CERN
6 shared publications - D. Treille
CERN
4 shared publications - Francesco Maria Velotti
CERN
4 shared publications - Jan Borburgh
European Organization for Nuclear Research
4 shared publications - Marco Calviani
European Organization for Nuclear Research
4 shared publications - Albert De Roeck
CERN
3 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (10) , 1231
Measurement of di-muons from 400 GeV/c protons interacting in a thick molybdenum/tungsten target
Di-muon events emanating from a replica of the SHiP target at the CERN SPS (with a 400 GeV/c proton beam) contain a clear signal of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}}$$ production. The target consisted of 13 interaction lengths of molybdenum and tungsten, followed by a 2.4m iron hadron absorber. The di-muon rate is in reasonable agreement with Monte Carlo simulation based on Pythia v8. However, the $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}} $$ rate observed in the data is much lower than predicted by the Monte Carlo simulation, which is advantageous for SHiP since muons with a large $$p_\textrm{T} $$ are more difficult to deflect by the active muon shield. For the center of mass rapidity ( $$y_{\textrm{cm}} $$ ) interval with the largest overlap with the NA50 measurement, $$0.3< y_{\textrm{cm}} < 0.6$$ , we obtain the production cross-section per nucleon $$\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A$$ including the branching ratios of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}} $$ decays into muons, $$B_{\mu ^+\mu ^-}$$ : $$B_{\mu ^+\mu ^-}\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A=(1.18~\pm ~0.04~\pm ~0.10)~\textrm{nb}$$ /nucleon. This is to be compared to the NA50 extrapolated result (using a much thinner target): $$B_{\mu ^+\mu ^-}\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A=(0.99~\pm ~0.04)~\textrm{nb}$$ /nucleon. Within the systematic errors, no significant enhancement due to secondary production of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}}$$ inside the target is observed. An upper limit at 90% confidence level of possible contributions from secondary collisions of $$<32\%$$ is obtained.- 26 October 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (10) , 1231
Open AccessMeasurement of di-muons from 400 GeV/c protons interacting in a thick molybdenum/tungsten target
Di-muon events emanating from a replica of the SHiP target at the CERN SPS (with a 400 GeV/c proton beam) contain a clear signal of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}}$$ production. The target consisted of 13 interaction lengths of molybdenum and tungsten, followed by a 2.4m iron hadron absorber. The di-muon rate is in reasonable agreement with Monte Carlo simulation based on Pythia v8. However, the $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}} $$ rate observed in the data is much lower than predicted by the Monte Carlo simulation, which is advantageous for SHiP since muons with a large $$p_\textrm{T} $$ are more difficult to deflect by the active muon shield. For the center of mass rapidity ( $$y_{\textrm{cm}} $$ ) interval with the largest overlap with the NA50 measurement, $$0.3< y_{\textrm{cm}} < 0.6$$ , we obtain the production cross-section per nucleon $$\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A$$ including the branching ratios of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}} $$ decays into muons, $$B_{\mu ^+\mu ^-}$$ : $$B_{\mu ^+\mu ^-}\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A=(1.18~\pm ~0.04~\pm ~0.10)~\textrm{nb}$$ /nucleon. This is to be compared to the NA50 extrapolated result (using a much thinner target): $$B_{\mu ^+\mu ^-}\sigma ({J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}})/A=(0.99~\pm ~0.04)~\textrm{nb}$$ /nucleon. Within the systematic errors, no significant enhancement due to secondary production of $${J \hspace{-1.66656pt}/\hspace{-1.111pt}\psi \hspace{1.111pt}}$$ inside the target is observed. An upper limit at 90% confidence level of possible contributions from secondary collisions of $$<32\%$$ is obtained. - Open Access
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Erratum to: Future Circular Collider Feasibility Study Report
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Open AccessErratum to: Future Circular Collider Feasibility Study Report
- Open Access
- 1 April 2026
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 53 (4) , 040501
LEP3: a high-luminosity e + e − Higgs and electroweak factory in the LHC tunnel*
The 2020 European Strategy for Particle Physics (ESPP) emphasized the critical importance of completing the high-luminosity LHC (HL-LHC) upgrade of both the accelerator and experiments in a timely manner, identifying it as a top priority for the field. The strategy also established two key recommendations for future accelerator initiatives: (i) the realization of an electron–positron Higgs factory as the highest-priority next collider, and (ii) the investigation, in collaboration with international partners, of the technical and financial feasibility of a hadron collider at CERN with a centre-of-mass energy of at least 100 TeV, potentially preceded by an electron–positron Higgs and electroweak factory. In alignment with these objectives, the Future Circular Collider (FCC) programme—comprising FCC-ee and FCC-hh—represents the preferred path forward for CERN, offering both precision and energy-frontier capabilities. However, the 2025 ESPP update calls for the identification of prioritized alternative options should the preferred FCC pathway prove infeasible or non-competitive. In this context, we propose LEP3, an electron–positron collider reusing the existing LHC tunnel, as a strategic backup to FCC-ee. LEP3 would exploit much of the research and development already carried out for FCC-ee, enabling high-precision studies of the Z, W, and Higgs bosons below the top–antitop production threshold. Combining strong physics potential with reduced cost, LEP3 provides performance comparable or superior to other fallback options—such as linear, muon, or LHeC colliders—while maintaining the technological continuity essential for a future energy-frontier collider. Conceived as a contingency, LEP3 complements, rather than competes with, the FCC-ee proposal.
- 1 April 2026
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 53 (4) , 040501
Open AccessLEP3: a high-luminosity e + e − Higgs and electroweak factory in the LHC tunnel*
The 2020 European Strategy for Particle Physics (ESPP) emphasized the critical importance of completing the high-luminosity LHC (HL-LHC) upgrade of both the accelerator and experiments in a timely manner, identifying it as a top priority for the field. The strategy also established two key recommendations for future accelerator initiatives: (i) the realization of an electron–positron Higgs factory as the highest-priority next collider, and (ii) the investigation, in collaboration with international partners, of the technical and financial feasibility of a hadron collider at CERN with a centre-of-mass energy of at least 100 TeV, potentially preceded by an electron–positron Higgs and electroweak factory. In alignment with these objectives, the Future Circular Collider (FCC) programme—comprising FCC-ee and FCC-hh—represents the preferred path forward for CERN, offering both precision and energy-frontier capabilities. However, the 2025 ESPP update calls for the identification of prioritized alternative options should the preferred FCC pathway prove infeasible or non-competitive. In this context, we propose LEP3, an electron–positron collider reusing the existing LHC tunnel, as a strategic backup to FCC-ee. LEP3 would exploit much of the research and development already carried out for FCC-ee, enabling high-precision studies of the Z, W, and Higgs bosons below the top–antitop production threshold. Combining strong physics potential with reduced cost, LEP3 provides performance comparable or superior to other fallback options—such as linear, muon, or LHeC colliders—while maintaining the technological continuity essential for a future energy-frontier collider. Conceived as a contingency, LEP3 complements, rather than competes with, the FCC-ee proposal.
- Top Cited PapersOpen Access
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Future Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Top Cited PapersOpen AccessFuture Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- Open Access
- 1 July 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (7)
Yb-based high-power frequency combs for high-intensity laser–particle interactions
Optical frequency combs (OFCs) are a revolutionary tool for metrology, spectroscopy, and, in general, the precise interaction of lasers with particles. In this context, ytterbium (Yb) based laser technologies are particularly relevant due to their broad bandwidth and ability to produce high average power laser beams at extremely low phase-noise level. Yb-based OFCs provide exceptional spectral purity and phase stability, making them especially suitable for seeding laser enhancement cavities, interferometers, and other precision instrumentation. At the same time, conventional methods for generating OFCs often require complex stabilization techniques, posing challenges in their integration in far-from-ideal environments, such as particle accelerators. An emerging alternative lies in electro-optic (EO) modulation schemes, which circumvent the need for stabilized cavities, significantly simplifying the laser architecture. While EO approaches introduce compromises in performance—particularly in terms of attainable phase noise—they offer a practical yet efficient solution for specific applications where absolute spectral purity is not as critical. In this paper, we review the significant advancements in OFC generation technologies, with a focus on their deployment in high-intensity laser–particle interaction experiments in accelerators. By assessing their performance, we aim to elucidate the strengths and compromises of different OFC technologies, highlighting their potential for future experiments at CERN and other particle accelerators worldwide.
- 1 July 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (7)
Open AccessYb-based high-power frequency combs for high-intensity laser–particle interactions
Optical frequency combs (OFCs) are a revolutionary tool for metrology, spectroscopy, and, in general, the precise interaction of lasers with particles. In this context, ytterbium (Yb) based laser technologies are particularly relevant due to their broad bandwidth and ability to produce high average power laser beams at extremely low phase-noise level. Yb-based OFCs provide exceptional spectral purity and phase stability, making them especially suitable for seeding laser enhancement cavities, interferometers, and other precision instrumentation. At the same time, conventional methods for generating OFCs often require complex stabilization techniques, posing challenges in their integration in far-from-ideal environments, such as particle accelerators. An emerging alternative lies in electro-optic (EO) modulation schemes, which circumvent the need for stabilized cavities, significantly simplifying the laser architecture. While EO approaches introduce compromises in performance—particularly in terms of attainable phase noise—they offer a practical yet efficient solution for specific applications where absolute spectral purity is not as critical. In this paper, we review the significant advancements in OFC generation technologies, with a focus on their deployment in high-intensity laser–particle interaction experiments in accelerators. By assessing their performance, we aim to elucidate the strengths and compromises of different OFC technologies, highlighting their potential for future experiments at CERN and other particle accelerators worldwide.
- Open Access
- 19 October 2023
- Published by MDPI AG in Physical Sciences Forum
- Vol. 8 (1) , 65
The Design of the ENUBET Beamline
The ENUBET project aims to reduce the flux-related systematics to 1% on a narrow band neutrino beam through monitoring the associated charged leptons in an instrumented decay tunnel. A key element of the project is the design of a meson transfer line with conventional magnets that maximize the yield of K and while minimizing the total length to reduce meson decay outside the instrumented region. In order to limit particle rates in the tunnel instrumentation, a high level of beam collimation is needed, thus allowing non-decayed mesons to reach the end of the tunnel. At the same time, fine-tuning of the shielding and the collimators is required to minimize any beam-induced background in the decay region. The magnetic lattice is optimized with TRANSPORT. The focusing of mesons from the target is performed with a static (quadrupole-based) system that, coupled with a slow proton extraction scheme, allows for a significant pile-up reduction at the tunnel instrumentation while retaining a particle yield large enough for high-precision neutrino cross-section measurements on a 3 year time scale. Charge and momentum selection in an 8.5GeV ± 10% momentum bite is performed by a double dipole system. Shielding elements are optimized with full simulation of the facility in Geant4. In particular, a powerful genetic algorithm is used to scan the parameter space of the collimators automatically in order to find a configuration that minimizes the halo background in the decay tunnel while preserving a large meson yield. This contribution will report the results of the optimization studies and the final design of the ENUBET beamline, together with dose estimation through a FLUKA simulation. The design of an alternative secondary beamline with a broad momentum range (4, 6, and 8.5 GeV/c) that could enhance the physics reach of the facility is additionally discussed.- 19 October 2023
- Published by MDPI AG in Physical Sciences Forum
- Vol. 8 (1) , 65
Open AccessThe Design of the ENUBET Beamline
The ENUBET project aims to reduce the flux-related systematics to 1% on a narrow band neutrino beam through monitoring the associated charged leptons in an instrumented decay tunnel. A key element of the project is the design of a meson transfer line with conventional magnets that maximize the yield of K and while minimizing the total length to reduce meson decay outside the instrumented region. In order to limit particle rates in the tunnel instrumentation, a high level of beam collimation is needed, thus allowing non-decayed mesons to reach the end of the tunnel. At the same time, fine-tuning of the shielding and the collimators is required to minimize any beam-induced background in the decay region. The magnetic lattice is optimized with TRANSPORT. The focusing of mesons from the target is performed with a static (quadrupole-based) system that, coupled with a slow proton extraction scheme, allows for a significant pile-up reduction at the tunnel instrumentation while retaining a particle yield large enough for high-precision neutrino cross-section measurements on a 3 year time scale. Charge and momentum selection in an 8.5GeV ± 10% momentum bite is performed by a double dipole system. Shielding elements are optimized with full simulation of the facility in Geant4. In particular, a powerful genetic algorithm is used to scan the parameter space of the collimators automatically in order to find a configuration that minimizes the halo background in the decay tunnel while preserving a large meson yield. This contribution will report the results of the optimization studies and the final design of the ENUBET beamline, together with dose estimation through a FLUKA simulation. The design of an alternative secondary beamline with a broad momentum range (4, 6, and 8.5 GeV/c) that could enhance the physics reach of the facility is additionally discussed. - Open Access
- 30 June 2023
- Published by MDPI AG in Physical Sciences Forum
- Vol. 8 (1) , 8
The ENUBET Monitored Neutrino Beam for High Precision Cross-Section Measurements
The main source of systematic uncertainty on neutrino cross-section measurements at the GeV scale originates from the poor knowledge of the initial flux. The goal of reducing this uncertainty to 1% can be achieved through the monitoring of charged leptons produced in association with neutrinos, by properly instrumenting the decay region of a conventional narrow-band neutrino beam. Large-angle muons and positrons from kaons are measured by a sampling calorimeter on the decay tunnel walls, while muon stations after the hadron dump can be used to monitor the neutrino component from pion decays. Furthermore, the narrow momentum width (<10%) of the beam provides a O (10%) measurement of the neutrino energy on an event-by-event basis, thanks to its correlation with the radial position of the interaction at the neutrino detector. The ENUBET project has been funded by the ERC in 2016 to prove the feasibility of such a monitored neutrino beam and, since 2019, ENUBET is also a CERN neutrino platform experiment (NP06/ENUBET). The breakthrough the project achieved is the design of a horn-less neutrino beamline that would allow for a 1% measurement of and cross-sections in about 3 years of data taking at CERN-SPS, using ProtoDUNE as far detector.- 30 June 2023
- Published by MDPI AG in Physical Sciences Forum
- Vol. 8 (1) , 8
Open AccessThe ENUBET Monitored Neutrino Beam for High Precision Cross-Section Measurements
The main source of systematic uncertainty on neutrino cross-section measurements at the GeV scale originates from the poor knowledge of the initial flux. The goal of reducing this uncertainty to 1% can be achieved through the monitoring of charged leptons produced in association with neutrinos, by properly instrumenting the decay region of a conventional narrow-band neutrino beam. Large-angle muons and positrons from kaons are measured by a sampling calorimeter on the decay tunnel walls, while muon stations after the hadron dump can be used to monitor the neutrino component from pion decays. Furthermore, the narrow momentum width (<10%) of the beam provides a O (10%) measurement of the neutrino energy on an event-by-event basis, thanks to its correlation with the radial position of the interaction at the neutrino detector. The ENUBET project has been funded by the ERC in 2016 to prove the feasibility of such a monitored neutrino beam and, since 2019, ENUBET is also a CERN neutrino platform experiment (NP06/ENUBET). The breakthrough the project achieved is the design of a horn-less neutrino beamline that would allow for a 1% measurement of and cross-sections in about 3 years of data taking at CERN-SPS, using ProtoDUNE as far detector. - Open Access
- 7 October 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (10) , 101601
Design of the optical system for the gamma factory proof of principle experiment at the CERN Super Proton Synchrotron
The Gamma Factory proof of principle experiment aims at colliding laser pulses with ultrarelativistic partially stripped ion beams at the CERN Super Proton Synchrotron. Its goals include the first demonstration of fast cooling of ultrarelativistic ion beams and opening up many possibilities for new physics measurements in various domains from atomic physics to particle physics. A high average-power, pulsed laser system delivering approximately 200 kW needs to be implemented for this aim. This is possible thanks to state-of-the-art optical systems that recently demonstrated similar performances in the laboratory environment. Challenges lie in the implementation of this kind of laser system in the harsh environment of hadronic machines including their robust and fully remote operation. The design of this laser system, involving a high quality factor enhancement cavity, is drawn and described in this article. Mitigation procedures are proposed to overcome limitations imposed by the occurrence of degenerate high-order mode at high average power in such optical resonators. We show that the operation at average power above 200 kW is feasible.
- 7 October 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (10) , 101601
Open AccessDesign of the optical system for the gamma factory proof of principle experiment at the CERN Super Proton Synchrotron
The Gamma Factory proof of principle experiment aims at colliding laser pulses with ultrarelativistic partially stripped ion beams at the CERN Super Proton Synchrotron. Its goals include the first demonstration of fast cooling of ultrarelativistic ion beams and opening up many possibilities for new physics measurements in various domains from atomic physics to particle physics. A high average-power, pulsed laser system delivering approximately 200 kW needs to be implemented for this aim. This is possible thanks to state-of-the-art optical systems that recently demonstrated similar performances in the laboratory environment. Challenges lie in the implementation of this kind of laser system in the harsh environment of hadronic machines including their robust and fully remote operation. The design of this laser system, involving a high quality factor enhancement cavity, is drawn and described in this article. Mitigation procedures are proposed to overcome limitations imposed by the occurrence of degenerate high-order mode at high average power in such optical resonators. We show that the operation at average power above 200 kW is feasible.
- Open Access
- 1 December 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (12) , 124801
Sample-efficient reinforcement learning for CERN accelerator control
Numerical optimization algorithms are already established tools to increase and stabilize the performance of particle accelerators. These algorithms have many advantages, are available out of the box, and can be adapted to a wide range of optimization problems in accelerator operation. The next boost in efficiency is expected to come from reinforcement learning algorithms that learn the optimal policy for a certain control problem and hence, once trained, can do without the time-consuming exploration phase needed for numerical optimizers. To investigate this approach, continuous model-free reinforcement learning with up to 16 degrees of freedom was developed and successfully tested at various facilities at CERN. The approach and algorithms used are discussed and the results obtained for trajectory steering at the AWAKE electron line and LINAC4 are presented. The necessary next steps, such as uncertainty aware model-based approaches, and the potential for future applications at particle accelerators are addressed.
- 1 December 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (12) , 124801
Open AccessSample-efficient reinforcement learning for CERN accelerator control
Numerical optimization algorithms are already established tools to increase and stabilize the performance of particle accelerators. These algorithms have many advantages, are available out of the box, and can be adapted to a wide range of optimization problems in accelerator operation. The next boost in efficiency is expected to come from reinforcement learning algorithms that learn the optimal policy for a certain control problem and hence, once trained, can do without the time-consuming exploration phase needed for numerical optimizers. To investigate this approach, continuous model-free reinforcement learning with up to 16 degrees of freedom was developed and successfully tested at various facilities at CERN. The approach and algorithms used are discussed and the results obtained for trajectory steering at the AWAKE electron line and LINAC4 are presented. The necessary next steps, such as uncertainty aware model-based approaches, and the potential for future applications at particle accelerators are addressed.
- Open Access
- 28 May 2020
- Published by Springer Nature
- p. 183-203
Interactions of Beams with Surroundings
With the exceptions of Synchrotron Radiation sources, beams of accelerated particles are generally designed to interact either with one another (in the case of colliders) or with a specific target (for the operation of Fixed Target experiments, the production of secondary beams and for medical applications). However, in addition to the desired interactions there are unwanted interactions of the high energy particles which can produce undesirable side effects. These interactions can arise from the unavoidable presence of residual gas in the accelerator vacuum chamber, or from the impact of particles lost from the beam on aperture limits around the accelerator, as well as the final beam dump. The wanted collisions of the beams in a collider to produce potentially interesting High Energy Physics events also reduces the density of the circulating beam and can produce high fluxes of secondary particles.
- 28 May 2020
- Published by Springer Nature
- p. 183-203
Open AccessInteractions of Beams with Surroundings
With the exceptions of Synchrotron Radiation sources, beams of accelerated particles are generally designed to interact either with one another (in the case of colliders) or with a specific target (for the operation of Fixed Target experiments, the production of secondary beams and for medical applications). However, in addition to the desired interactions there are unwanted interactions of the high energy particles which can produce undesirable side effects. These interactions can arise from the unavoidable presence of residual gas in the accelerator vacuum chamber, or from the impact of particles lost from the beam on aperture limits around the accelerator, as well as the final beam dump. The wanted collisions of the beams in a collider to produce potentially interesting High Energy Physics events also reduces the density of the circulating beam and can produce high fluxes of secondary particles.