Somnath Nandi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Somnath Nandi has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Pratiksha Deepak Khurpade
Dr. Vishwanath Karad MIT World Peace University
5 shared publications Sanjeev S. Tambe
4 shared publications- Anand Dhananjay Kulkarni
Dr. Vishwanath Karad MIT World Peace University
3 shared publications Bhaskar D. Kulkarni
Chemical Engineering Division, National Chemical Laboratory, Pune 411008, India
3 shared publicationsPratiksha D. Khurpade
School of Chemical Engineering, Dr. Vishwanath Karad Maharashtra Institute of Technology, World Peace University, Pune – 411038, India
2 shared publicationsSushovan Sen
National Institute of Technology Durgapur
2 shared publications
Latest Publications
- Open Access
- 17 February 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 226
Sustainable polyurethane foam formulation with bio-polyol blends for automotive seating applications
- 17 February 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 226
Open AccessSustainable polyurethane foam formulation with bio-polyol blends for automotive seating applications
- Open Access
- 31 August 2024
- Published by Journal of Pure and Applied Microbiology in Journal of Pure and Applied Microbiology
- Vol. 18 (3) , 2095-2112
Food Waste Processing Trends Worldwide and Valorization of Food Waste from Pune City
This article lays its primary focus on understanding waste from the domestic and commercial hotel kitchens. For researchers, deciding biotechnological treatment and valorization process, it is necessary to refer and understand the food waste (FW) composition and its processing trends worldwide. This paper mentions the FW compositional data from four different locations of “Pune” a metro city of India. Study-approved procedures for sample collection, preparation, and analysis were followed. The results indicate, the presence of carbohydrates, proteins, and fats in all samples and are sufficient to support the microbial growth and desired product formation. Being perishable, microbiological and compositional changes during handling and transportation, in FW are inevitable. The presence of high boiling, low boiling volatile compounds and volatile organic acids indicate the complexity of FW and microbial activity taking place within it. Abundant amount of trace elements essential for enzymatic reactions and building block molecule formation are present. Average important figures to mention, starch- 7.27% w/w, free sugars- 3.39% w/w, proteins- 7.99% w/w and fats- 12.84% w/w. In addition, essential trace elements Zn- 4 mg/lit, Mn- 4 mg/lit, Mg- 239 mg/lit, S-433 mg/lit and P- 922 mg/lit. The numbers help to realize the nutritional richness of the FW in reality and provide fundamental statistical data for researchers. Treatment and recycling can be done to contribute toward a circular bio-economy. Remarkable variations observed in almost all components on day-to-day basis. However, pretreatment process parameters can be decided to account for compositional variations.
- 31 August 2024
- Published by Journal of Pure and Applied Microbiology in Journal of Pure and Applied Microbiology
- Vol. 18 (3) , 2095-2112
Open AccessFood Waste Processing Trends Worldwide and Valorization of Food Waste from Pune City
This article lays its primary focus on understanding waste from the domestic and commercial hotel kitchens. For researchers, deciding biotechnological treatment and valorization process, it is necessary to refer and understand the food waste (FW) composition and its processing trends worldwide. This paper mentions the FW compositional data from four different locations of “Pune” a metro city of India. Study-approved procedures for sample collection, preparation, and analysis were followed. The results indicate, the presence of carbohydrates, proteins, and fats in all samples and are sufficient to support the microbial growth and desired product formation. Being perishable, microbiological and compositional changes during handling and transportation, in FW are inevitable. The presence of high boiling, low boiling volatile compounds and volatile organic acids indicate the complexity of FW and microbial activity taking place within it. Abundant amount of trace elements essential for enzymatic reactions and building block molecule formation are present. Average important figures to mention, starch- 7.27% w/w, free sugars- 3.39% w/w, proteins- 7.99% w/w and fats- 12.84% w/w. In addition, essential trace elements Zn- 4 mg/lit, Mn- 4 mg/lit, Mg- 239 mg/lit, S-433 mg/lit and P- 922 mg/lit. The numbers help to realize the nutritional richness of the FW in reality and provide fundamental statistical data for researchers. Treatment and recycling can be done to contribute toward a circular bio-economy. Remarkable variations observed in almost all components on day-to-day basis. However, pretreatment process parameters can be decided to account for compositional variations.
- Open Access
- 13 June 2024
- Published by KEAI Publishing in Petroleum
- Vol. 10 (4) , 620-630
Estimation of SARA composition of crudes purely from density and viscosity using machine learning based models
- 13 June 2024
- Published by KEAI Publishing in Petroleum
- Vol. 10 (4) , 620-630
Open AccessEstimation of SARA composition of crudes purely from density and viscosity using machine learning based models
- 17 October 2023
- Published by Springer Nature
- p. 115-129
Experimental Study on Green Synthesis of Copper Nanoparticles and Its Utilization for Degradation of Organic Dye
- 17 October 2023
- Published by Springer Nature
- p. 115-129
Experimental Study on Green Synthesis of Copper Nanoparticles and Its Utilization for Degradation of Organic Dye
- Open Access
- 23 August 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (9) , 356
Prediction of Thrust Force and Torque for High-Speed Drilling of AL6061 with TMPTO-Based Bio-Lubricants Using Machine Learning
This study was designed to examine the effects of a trimethylolpropane trioleate (TMPTO)-based lubricant on thrust force and torque under the high-speed drilling of Al-6061 as an effective environmentally friendly cutting fluid. The tribological performance of three lubricant blends was evaluated based on ASTM standards. TMPTO base oil, notably enhances load-carrying capacity under extreme pressure conditions, with a seizer load of 7848 N. The best-performing oil was further optimized using a Taguchi-based design experiment to investigate the effect of different additive concentrations on thrust force and torque under actual contact conditions. Experiments were conducted using three critical machining parameters: additive concentration, spindle speed, and feed rate. The results of the ANOVA analysis reveal that spindle speed contributes most substantially (62.99%) to torque, with feed rate (23.72%) and additive concentration (7.74%) also showing significant impacts. On the other hand, thrust force is primarily influenced by feed rate (73.52%), followed by spindle speed (16.82%), and additive concentration (6.28%). Furthermore, a machine learning model was developed to predict and compare a few significant aspects of high-speed drilling machinability, including thrust force and torque. Three different error metrics were utilized in order to assess the performance of the predicted values, namely the coefficient of determination (R2), mean absolute percentage error (MAPE) and mean square error (MSE), which are all based on the coefficient of determination. Compared to other models, decision tree produces more accurate prediction values for cutting forces. The present study provides a novel approach for evaluating the most promising biodegradable lube oils and predicting cutting forces by formulating a perfect blend.
- 23 August 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (9) , 356
Open AccessPrediction of Thrust Force and Torque for High-Speed Drilling of AL6061 with TMPTO-Based Bio-Lubricants Using Machine Learning
This study was designed to examine the effects of a trimethylolpropane trioleate (TMPTO)-based lubricant on thrust force and torque under the high-speed drilling of Al-6061 as an effective environmentally friendly cutting fluid. The tribological performance of three lubricant blends was evaluated based on ASTM standards. TMPTO base oil, notably enhances load-carrying capacity under extreme pressure conditions, with a seizer load of 7848 N. The best-performing oil was further optimized using a Taguchi-based design experiment to investigate the effect of different additive concentrations on thrust force and torque under actual contact conditions. Experiments were conducted using three critical machining parameters: additive concentration, spindle speed, and feed rate. The results of the ANOVA analysis reveal that spindle speed contributes most substantially (62.99%) to torque, with feed rate (23.72%) and additive concentration (7.74%) also showing significant impacts. On the other hand, thrust force is primarily influenced by feed rate (73.52%), followed by spindle speed (16.82%), and additive concentration (6.28%). Furthermore, a machine learning model was developed to predict and compare a few significant aspects of high-speed drilling machinability, including thrust force and torque. Three different error metrics were utilized in order to assess the performance of the predicted values, namely the coefficient of determination (R2), mean absolute percentage error (MAPE) and mean square error (MSE), which are all based on the coefficient of determination. Compared to other models, decision tree produces more accurate prediction values for cutting forces. The present study provides a novel approach for evaluating the most promising biodegradable lube oils and predicting cutting forces by formulating a perfect blend.
- Open Access
- 27 July 2023
- Published by Set Publishers in Journal of Basic & Applied Sciences
- Vol. 19, 106-115
Heat of Vaporization and Refractive Index Estimation for Hydrocarbons and Petroleum Fractions based on Simple Models
The present research reports that simple two parameter and three parameter models integrating normal boiling point, specific gravity and molecular weight of hydrocarbons can effectively be used for estimation of different important properties namely heat of vaporization and refractive index. Multivariate regression analysis was employed for model development based on experimental data of pure hydrocarbons reported in literature. Subsequently, it has been demonstrated that this model can be utilized further for prediction of those properties for different petroleum fractions as well. The developed simple generalized two parameter regression-based models can predict heat of vaporization of pure hydrocarbons (C3 – C30) and petroleum fractions with wide boiling point range from 355.5 to 646.8 K with good accuracy (percentage error less than 10% for pure hydrocarbons and lower than 13% for petroleum fractions) in addition, refractive index of petroleum fractions are estimated with percentage error of less than 4.01%. Moreover, comparison results demonstrated that developed models are more accurate and simpler for practical applications in petroleum industry as compared to earlier published correlations for both pure hydrocarbons and petroleum fractions.
- 27 July 2023
- Published by Set Publishers in Journal of Basic & Applied Sciences
- Vol. 19, 106-115
Open AccessHeat of Vaporization and Refractive Index Estimation for Hydrocarbons and Petroleum Fractions based on Simple Models
The present research reports that simple two parameter and three parameter models integrating normal boiling point, specific gravity and molecular weight of hydrocarbons can effectively be used for estimation of different important properties namely heat of vaporization and refractive index. Multivariate regression analysis was employed for model development based on experimental data of pure hydrocarbons reported in literature. Subsequently, it has been demonstrated that this model can be utilized further for prediction of those properties for different petroleum fractions as well. The developed simple generalized two parameter regression-based models can predict heat of vaporization of pure hydrocarbons (C3 – C30) and petroleum fractions with wide boiling point range from 355.5 to 646.8 K with good accuracy (percentage error less than 10% for pure hydrocarbons and lower than 13% for petroleum fractions) in addition, refractive index of petroleum fractions are estimated with percentage error of less than 4.01%. Moreover, comparison results demonstrated that developed models are more accurate and simpler for practical applications in petroleum industry as compared to earlier published correlations for both pure hydrocarbons and petroleum fractions.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Hybrid Anaerobic Membrane Bioreactor System for Treatment and Reuse of Potato Processing Wastewater
The changing lifestyle and the growing demand for convenience food have boosted the growth of the potato processing industry. With the expansion of production capacity, large amount of water is consumed during different processing stages and equally high quantity of wastewater is generated. Given the current deficit of water and strict regulations, procuring of water for different stages of food processing is no longer an attractive option. Therefore, several enterprises are now focussing on sustainable approaches for wastewater reuse. The wastewater treatment scheme in potato processing industries involve a series of unit operations which prove to be uneconomical to achieve the targeted recyclable-quality water. The following work demonstrates the feasibility of integrated anaerobic membrane bioreactor (AnMBR) and reverse osmosis (RO) unit for the treatment and reuse of potato processing wastewater. The AnMBR – RO system presents a consolidated solution for reuse of industrial effluent with nearly 99% organics and solids removal. Moreover, the organics-rich wastewater contribute to high methane yield which subsequently results in improved energy-efficiency of the system and corroborates its applicability in large-scale wastewater treatment plants.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessHybrid Anaerobic Membrane Bioreactor System for Treatment and Reuse of Potato Processing Wastewater
The changing lifestyle and the growing demand for convenience food have boosted the growth of the potato processing industry. With the expansion of production capacity, large amount of water is consumed during different processing stages and equally high quantity of wastewater is generated. Given the current deficit of water and strict regulations, procuring of water for different stages of food processing is no longer an attractive option. Therefore, several enterprises are now focussing on sustainable approaches for wastewater reuse. The wastewater treatment scheme in potato processing industries involve a series of unit operations which prove to be uneconomical to achieve the targeted recyclable-quality water. The following work demonstrates the feasibility of integrated anaerobic membrane bioreactor (AnMBR) and reverse osmosis (RO) unit for the treatment and reuse of potato processing wastewater. The AnMBR – RO system presents a consolidated solution for reuse of industrial effluent with nearly 99% organics and solids removal. Moreover, the organics-rich wastewater contribute to high methane yield which subsequently results in improved energy-efficiency of the system and corroborates its applicability in large-scale wastewater treatment plants.
- 18 October 2020
- Published by Springer Nature
- p. 15-24
CMG-Based Simulation Study of Water Flooding of Petroleum Reservoir
- 18 October 2020
- Published by Springer Nature
- p. 15-24
CMG-Based Simulation Study of Water Flooding of Petroleum Reservoir