Thomas Gretzinger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Thomas Gretzinger has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Simon Gross
Macquarie University
11 shared publications - Michael J. Withford
Macquarie University
10 shared publications - Barnaby Norris
The University of Sydney
6 shared publications - Tiphaine Lagadec
The Univ. of Sydney (Australia)
6 shared publications Alexander Arriola
MQ Photonics Research Centre, Macquarie University, Sydney, Australia
5 shared publications- Marc-Antoine Martinod
KU Leuven, Institute of Astronomy, Leuven, Belgium
5 shared publications
Latest Publications
- 8 May 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (10) , 2832-2835
Mid-infrared nulling interferometry beam combiners using asymmetric directional couplers
We demonstrate reproducible asymmetric directional couplers in gallium-lanthanum-sulfide (GLS) chalcogenide glass, using ultrafast laser inscription (ULI). This enables on-chip high-contrast nulling interferometry in the mid-infrared, specifically aimed at detecting giant exoplanets in the astronomical L ′ band (3.5−4.0 μm). By leveraging a classical two-telescope integrated optics beam combination scheme and conducting characterization in a laboratory environment, we demonstrate an extinction ratio of ∼10 −2 across 3.65−3.85 μm.
- 8 May 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (10) , 2832-2835
Mid-infrared nulling interferometry beam combiners using asymmetric directional couplers
We demonstrate reproducible asymmetric directional couplers in gallium-lanthanum-sulfide (GLS) chalcogenide glass, using ultrafast laser inscription (ULI). This enables on-chip high-contrast nulling interferometry in the mid-infrared, specifically aimed at detecting giant exoplanets in the astronomical L ′ band (3.5−4.0 μm). By leveraging a classical two-telescope integrated optics beam combination scheme and conducting characterization in a laboratory environment, we demonstrate an extinction ratio of ∼10 −2 across 3.65−3.85 μm.
- Open Access
- 1 October 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (04) , 048005-17
Machine-learning approach for optimal self-calibration and fringe tracking in photonic nulling interferometry
Nulling interferometry is a key technology in the quest to directly image high-contrast objects at angular resolutions at and higher than the telescope diffraction limit, such as the case of directly imaging exoplanets in the habitable zone. As with conventional interferometry, light from separate telescopes or sub-apertures is coherently combined, and the visibility and phase of the resulting fringes is used to determine the source intensity map of the target. But in nulling interferometry, differential phase delays are carefully tuned such that the central star is subject to maximal destructive interference, removing its otherwise overwhelming photon noise and allowing the faint, off-axis science object’s light to be detected.
- 1 October 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (04) , 048005-17
Open AccessMachine-learning approach for optimal self-calibration and fringe tracking in photonic nulling interferometry
Nulling interferometry is a key technology in the quest to directly image high-contrast objects at angular resolutions at and higher than the telescope diffraction limit, such as the case of directly imaging exoplanets in the habitable zone. As with conventional interferometry, light from separate telescopes or sub-apertures is coherently combined, and the visibility and phase of the resulting fringes is used to determine the source intensity map of the target. But in nulling interferometry, differential phase delays are carefully tuned such that the central star is subject to maximal destructive interference, removing its otherwise overwhelming photon noise and allowing the faint, off-axis science object’s light to be detected.
- 13 April 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (9) , 13998-14007
Terahertz reflection hyperspectral 3D imaging using beam scanning
Terahertz (THz) radiation has the capability to combine spectroscopy and imaging in a single system. The resulting hyperspectral images can reveal concealed objects and identify materials by means of characteristic spectral features. For security applications, THz is attractive for its non-contact and non-destructive measurement capabilities. For such applications, objects may be too absorbing for transmission measurements, or only one side of an object may be accessible, necessitating a reflection measurement configuration. This work details the development and demonstration of a compact fiber-coupled hyperspectral imaging reflection system suited to field use for security and industrial applications. The system uses beam steering to measure objects of up to 150 mm diameter with a depth range of up to 255 mm, allowing for 3-dimensional mapping of objects, while simultaneously acquiring spectral data. Spectral information between 0.2-1.8 THz is extracted from a hyperspectral image and used to identify lactose, tartaric acid, and 4-aminobenzoic acid in high and low humidity environments.
- 13 April 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (9) , 13998-14007
Terahertz reflection hyperspectral 3D imaging using beam scanning
Terahertz (THz) radiation has the capability to combine spectroscopy and imaging in a single system. The resulting hyperspectral images can reveal concealed objects and identify materials by means of characteristic spectral features. For security applications, THz is attractive for its non-contact and non-destructive measurement capabilities. For such applications, objects may be too absorbing for transmission measurements, or only one side of an object may be accessible, necessitating a reflection measurement configuration. This work details the development and demonstration of a compact fiber-coupled hyperspectral imaging reflection system suited to field use for security and industrial applications. The system uses beam steering to measure objects of up to 150 mm diameter with a depth range of up to 255 mm, allowing for 3-dimensional mapping of objects, while simultaneously acquiring spectral data. Spectral information between 0.2-1.8 THz is extracted from a hyperspectral image and used to identify lactose, tartaric acid, and 4-aminobenzoic acid in high and low humidity environments.
- Open Access
- 1 September 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11823, 118230C-11
Very high resolution spectro-interferometry with wavefront sensing capabilities on Subaru/SCExAO using photonics
Post Extreme Adaptive-Optics (ExAO) spectro-interferometers design allows high contrast imaging with an inner working angle down to half the theoretical angular resolution of the telescope. This regime, out of reach for conventional ExAO imaging systems, is obtained thanks to the interferometric recombination of multiple sub-apertures of a single telescope, using single mode waveguides to remove speckle noise. The SCExAO platform at the Subaru telescope hosts two instruments with such design, coupled with a spectrograph. The FIRST instrument operates in the Visible (600-800nm, R~400) and is based on pupil remapping using single-mode fibers. The GLINT instrument works in the NIR (1450-1650nm, R~160) and is based on nulling interferometry. We present here how these photonic instruments have the unique capability to simultaneously do high contrast imaging and be included in the wavefront sensing architecture of SCExAO.
- 1 September 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11823, 118230C-11
Open AccessVery high resolution spectro-interferometry with wavefront sensing capabilities on Subaru/SCExAO using photonics
Post Extreme Adaptive-Optics (ExAO) spectro-interferometers design allows high contrast imaging with an inner working angle down to half the theoretical angular resolution of the telescope. This regime, out of reach for conventional ExAO imaging systems, is obtained thanks to the interferometric recombination of multiple sub-apertures of a single telescope, using single mode waveguides to remove speckle noise. The SCExAO platform at the Subaru telescope hosts two instruments with such design, coupled with a spectrograph. The FIRST instrument operates in the Visible (600-800nm, R~400) and is based on pupil remapping using single-mode fibers. The GLINT instrument works in the NIR (1450-1650nm, R~160) and is based on nulling interferometry. We present here how these photonic instruments have the unique capability to simultaneously do high contrast imaging and be included in the wavefront sensing architecture of SCExAO.
- 9 August 2021
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 38
The GLINT South testbed for nulling interferometry with photonics: Design and on-sky results at the Anglo-Australian Telescope
In 1978, Bracewell suggested the technique of nulling interferometry to directly image exoplanets which would enable characterisation of their surfaces, atmospheres, weather, and possibly determine their capacity to host life. The contrast needed to discriminate starlight reflected by a terrestrial-type planet from the glare of its host star lies at or beyond a forbidding $10^{-10}$ for an exo-Earth in the habitable zone around a Sun-like star at near-infrared wavelengths, necessitating instrumentation with extremely precise control of the light. Guided Light Interferometric Nulling Technology (GLINT) is a testbed for new photonic devices conceived to overcome the challenges posed by nulling interferometry. At its heart, GLINT employs a single-mode nulling photonic chip fabricated by direct-write technology to coherently combine starlight from an arbitrarily large telescope at 1 550 nm. It operates in combination with an actuated segmented mirror in a closed-loop control system, to produce and sustain a deep null throughout observations. The GLINT South prototype interfacesthe 3.9-m Anglo-Australian Telescope and was tested on a sample of bright Mira variable stars. Successful and continuous starlight injection into the photonic chip was achieved. A statistical model of the data was constructed, enabling a data reduction algorithm to retrieve contrast ratios of about $10^{-3}$ . As a byproduct of this analysis, stellar angular diameters that were below the telescope diffraction limit( $\sim$ 100 mas) were recovered with1 $\sigma$ accuracy and shown to be in agreement with literature values despite working in the seeing-limited regime. GLINT South serves as a demonstration of the capability of direct-write photonic technology for achieving coherent, stable nulling of starlight, which will encourage further technological developments towards the goal of directly imaging exoplanets with future large ground based and space telescopes.- 9 August 2021
- Published by Cambridge University Press (CUP) in Publications of the Astronomical Society of Australia
- Vol. 38
The GLINT South testbed for nulling interferometry with photonics: Design and on-sky results at the Anglo-Australian Telescope
In 1978, Bracewell suggested the technique of nulling interferometry to directly image exoplanets which would enable characterisation of their surfaces, atmospheres, weather, and possibly determine their capacity to host life. The contrast needed to discriminate starlight reflected by a terrestrial-type planet from the glare of its host star lies at or beyond a forbidding $10^{-10}$ for an exo-Earth in the habitable zone around a Sun-like star at near-infrared wavelengths, necessitating instrumentation with extremely precise control of the light. Guided Light Interferometric Nulling Technology (GLINT) is a testbed for new photonic devices conceived to overcome the challenges posed by nulling interferometry. At its heart, GLINT employs a single-mode nulling photonic chip fabricated by direct-write technology to coherently combine starlight from an arbitrarily large telescope at 1 550 nm. It operates in combination with an actuated segmented mirror in a closed-loop control system, to produce and sustain a deep null throughout observations. The GLINT South prototype interfacesthe 3.9-m Anglo-Australian Telescope and was tested on a sample of bright Mira variable stars. Successful and continuous starlight injection into the photonic chip was achieved. A statistical model of the data was constructed, enabling a data reduction algorithm to retrieve contrast ratios of about $10^{-3}$ . As a byproduct of this analysis, stellar angular diameters that were below the telescope diffraction limit( $\sim$ 100 mas) were recovered with1 $\sigma$ accuracy and shown to be in agreement with literature values despite working in the seeing-limited regime. GLINT South serves as a demonstration of the capability of direct-write photonic technology for achieving coherent, stable nulling of starlight, which will encourage further technological developments towards the goal of directly imaging exoplanets with future large ground based and space telescopes.- Open Access
- 29 April 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-11
Scalable photonic-based nulling interferometry with the dispersed multi-baseline GLINT instrument
Characterisation of exoplanets is key to understanding their formation, composition and potential for life. Nulling interferometry, combined with extreme adaptive optics, is among the most promising techniques to advance this goal. We present an integrated-optic nuller whose design is directly scalable to future science-ready interferometric nullers: the Guided-Light Interferometric Nulling Technology, deployed at the Subaru Telescope. It combines four beams and delivers spatial and spectral information. We demonstrate the capability of the instrument, achieving a null depth better than 10−3 with a precision of 10−4 for all baselines, in laboratory conditions with simulated seeing applied. On sky, the instrument delivered angular diameter measurements of stars that were 2.5 times smaller than the diffraction limit of the telescope. These successes pave the way for future design enhancements: scaling to more baselines, improved photonic component and handling low-order atmospheric aberration within the instrument, all of which will contribute to enhance sensitivity and precision.
- 29 April 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-11
Open AccessScalable photonic-based nulling interferometry with the dispersed multi-baseline GLINT instrument
Characterisation of exoplanets is key to understanding their formation, composition and potential for life. Nulling interferometry, combined with extreme adaptive optics, is among the most promising techniques to advance this goal. We present an integrated-optic nuller whose design is directly scalable to future science-ready interferometric nullers: the Guided-Light Interferometric Nulling Technology, deployed at the Subaru Telescope. It combines four beams and delivers spatial and spectral information. We demonstrate the capability of the instrument, achieving a null depth better than 10−3 with a precision of 10−4 for all baselines, in laboratory conditions with simulated seeing applied. On sky, the instrument delivered angular diameter measurements of stars that were 2.5 times smaller than the diffraction limit of the telescope. These successes pave the way for future design enhancements: scaling to more baselines, improved photonic component and handling low-order atmospheric aberration within the instrument, all of which will contribute to enhance sensitivity and precision.
- 17 June 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (13) , 3369-3372
Boson band mapping: revealing ultrafast laser induced structural modifications in chalcogenide glass
The formation of femtosecond laser direct-written waveguides in gallium lanthanum sulfide (GLS) chalcogenide glass with a peak index contrast of Δ n max = 0.023 and an average positive refractive index change of Δ n w a v e g u i d e = 0.0049 is explained for the first time, to the best of our knowledge. Evidence of structural change and ion migration is presented using Raman spectroscopy and electron probe microanalysis (EPMA), respectively. Raman microscopy reveals a frequency shift and a change in full-width at half maximum variation of the symmetric vibration of the G a S 4 tetrahedra. The boson band is successfully used to identify and understand the material densification profile in a high refractive index glass waveguide. EPMA provides evidence of ion migration due to sulfur, where the observation of an anion ( S 2 − ) migration causing material modification is reported for the first time. These results will enable optimization of future mid-infrared and nonlinear integrated optical devices in GLS glass based on femtosecond laser written waveguides.
- 17 June 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (13) , 3369-3372
Boson band mapping: revealing ultrafast laser induced structural modifications in chalcogenide glass
The formation of femtosecond laser direct-written waveguides in gallium lanthanum sulfide (GLS) chalcogenide glass with a peak index contrast of Δ n max = 0.023 and an average positive refractive index change of Δ n w a v e g u i d e = 0.0049 is explained for the first time, to the best of our knowledge. Evidence of structural change and ion migration is presented using Raman spectroscopy and electron probe microanalysis (EPMA), respectively. Raman microscopy reveals a frequency shift and a change in full-width at half maximum variation of the symmetric vibration of the G a S 4 tetrahedra. The boson band is successfully used to identify and understand the material densification profile in a high refractive index glass waveguide. EPMA provides evidence of ion migration due to sulfur, where the observation of an anion ( S 2 − ) migration causing material modification is reported for the first time. These results will enable optimization of future mid-infrared and nonlinear integrated optical devices in GLS glass based on femtosecond laser written waveguides.
- 3 January 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11203, 26
Imaging exoplanets with nulling interferometry using integrated-photonics: the GLINT project
As confirmed exoplanets climb into the thousands, the era of exoplanets discovery is giving way to exoplanet characterization. The most desirable scenario is one where the exoplanet can be directly imaged. Direct imaging not only delivers orbital parameters, but also yields the chemical composition of the atmosphere. The potential for habitable zone exoplanets to exhibit biosignatures in such data from a visionary future instrument drives intense interest. However, this requires to simultaneously reach extremely high star-to-planet contrast (from 104 to 108) and extremely high angular resolution (around and below the diffraction limit). Accomplishing all this through the atmosphere blurred by turbulence remains a critical challenge, yet it is one that nulling interferometry in combination with extreme adaptive optics aims to meet. This technique overcomes the contrast problem by removing the starlight with destructive interference, permitting the faint light coming from the planet to remain. In this paper, we present the latest evolution of nulling interferometry instrumentation: the integrated- photonic nuller. It allows spatial filtering, multiple simultaneous baselines, simultaneous photometric channels and simultaneous measurement of the "nulled" signal (the light emitted from the planet after cancelling the starlight) as well as the "anti-nulled" signal (the channel containing the redirected starlight). Exploiting these fundamental optical principles, the delivery of imaging and differential spectroscopy of exoplanetary systems becomes possible. This paper describes a pathfinder that has implemented these ideas into a robust and compact photonic-chip platform known as the GLINT (Guided-Light Interferometric Nulling Technology) project.
- 3 January 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11203, 26
Imaging exoplanets with nulling interferometry using integrated-photonics: the GLINT project
As confirmed exoplanets climb into the thousands, the era of exoplanets discovery is giving way to exoplanet characterization. The most desirable scenario is one where the exoplanet can be directly imaged. Direct imaging not only delivers orbital parameters, but also yields the chemical composition of the atmosphere. The potential for habitable zone exoplanets to exhibit biosignatures in such data from a visionary future instrument drives intense interest. However, this requires to simultaneously reach extremely high star-to-planet contrast (from 104 to 108) and extremely high angular resolution (around and below the diffraction limit). Accomplishing all this through the atmosphere blurred by turbulence remains a critical challenge, yet it is one that nulling interferometry in combination with extreme adaptive optics aims to meet. This technique overcomes the contrast problem by removing the starlight with destructive interference, permitting the faint light coming from the planet to remain. In this paper, we present the latest evolution of nulling interferometry instrumentation: the integrated- photonic nuller. It allows spatial filtering, multiple simultaneous baselines, simultaneous photometric channels and simultaneous measurement of the "nulled" signal (the light emitted from the planet after cancelling the starlight) as well as the "anti-nulled" signal (the channel containing the redirected starlight). Exploiting these fundamental optical principles, the delivery of imaging and differential spectroscopy of exoplanetary systems becomes possible. This paper describes a pathfinder that has implemented these ideas into a robust and compact photonic-chip platform known as the GLINT (Guided-Light Interferometric Nulling Technology) project.
- Open Access
- 11 March 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (6) , 8626-8638
Towards a photonic mid-infrared nulling interferometer in chalcogenide glass
Nulling interferometry enables astronomers to advance beyond the resolving power of ground-based telescopes with the goal of directly detecting exo-planets. By diminishing the overwhelming emission of the host star through destructive interference, radiation from young companions can be observed. The atmospheric transmission window centered around 4 μm wavelength is of particular interest because it has a favorable contrast between star and planet as well as a reduced atmospheric disturbance. For robustness and high stability, it is desirable to employ integrated devices based on optical waveguide technology. Their development is hindered at this wavelength range due to the lack of suitable host materials and compatible fabrication techniques to create low-loss photonic devices. This paper details our work on femtosecond laser direct-written optical waveguides and key components for an on-chip nulling interferometer inside gallium lanthanum sulphur glass. By combining cumulative heating fabrication with the multiscan technique, single-mode optical waveguides with propagation losses as low as 0.22 ± 0.02 dB/cm at 4 μm and polarization-dependent losses of < 0.1 dB/cm were realized. Furthermore, S-bends with negligible bending loss and broadband Y-splitters with 50/50 power division across a 600 nm wavelength window (3.6 – 4.2 μm) and low losses of < 0.5 dB are demonstrated. Directional couplers with an equal splitting ratio complement these main building blocks to create a future compact nulling interferometer with a total projected intrinsic loss of < 1 dB, a value that is sufficient to perform future on-sky experiments in relatively short observation runs on ground-based telescopes.
- 11 March 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (6) , 8626-8638
Open AccessTowards a photonic mid-infrared nulling interferometer in chalcogenide glass
Nulling interferometry enables astronomers to advance beyond the resolving power of ground-based telescopes with the goal of directly detecting exo-planets. By diminishing the overwhelming emission of the host star through destructive interference, radiation from young companions can be observed. The atmospheric transmission window centered around 4 μm wavelength is of particular interest because it has a favorable contrast between star and planet as well as a reduced atmospheric disturbance. For robustness and high stability, it is desirable to employ integrated devices based on optical waveguide technology. Their development is hindered at this wavelength range due to the lack of suitable host materials and compatible fabrication techniques to create low-loss photonic devices. This paper details our work on femtosecond laser direct-written optical waveguides and key components for an on-chip nulling interferometer inside gallium lanthanum sulphur glass. By combining cumulative heating fabrication with the multiscan technique, single-mode optical waveguides with propagation losses as low as 0.22 ± 0.02 dB/cm at 4 μm and polarization-dependent losses of < 0.1 dB/cm were realized. Furthermore, S-bends with negligible bending loss and broadband Y-splitters with 50/50 power division across a 600 nm wavelength window (3.6 – 4.2 μm) and low losses of < 0.5 dB are demonstrated. Directional couplers with an equal splitting ratio complement these main building blocks to create a future compact nulling interferometer with a total projected intrinsic loss of < 1 dB, a value that is sufficient to perform future on-sky experiments in relatively short observation runs on ground-based telescopes.
- 9 July 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10701, 107010V
GLINT South: A photonic nulling interferometer pathfinder at the Anglo-Australian Telescope for high contrast imaging of substellar companions
With many thousands of exoplanets discovered one of the important next steps in astronomy is to be able to characterise them. This presents a great challenge and calls for new observational capabilities with both high angular resolution and extreme high contrast in order to efficiently separate the bright light of a host star to that of a faint companion. Glint South is an instrument that uses photonic technology to perform nulling interferometry. The light of a star is cancelled out by means of destructive interference in a photonic chip. One of the challenges is the star light injection into the chip. This is done by a unique active system that optimises the injection and provide low order correction for the atmospheric turbulence. We are reporting on the latest progress following several tests on the Anglo Australian Telescope.
- 9 July 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10701, 107010V
GLINT South: A photonic nulling interferometer pathfinder at the Anglo-Australian Telescope for high contrast imaging of substellar companions
With many thousands of exoplanets discovered one of the important next steps in astronomy is to be able to characterise them. This presents a great challenge and calls for new observational capabilities with both high angular resolution and extreme high contrast in order to efficiently separate the bright light of a host star to that of a faint companion. Glint South is an instrument that uses photonic technology to perform nulling interferometry. The light of a star is cancelled out by means of destructive interference in a photonic chip. One of the challenges is the star light injection into the chip. This is done by a unique active system that optimises the injection and provide low order correction for the atmospheric turbulence. We are reporting on the latest progress following several tests on the Anglo Australian Telescope.