MSMartin Sterner

Martin Sterner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Martin Sterner has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid Filaments from Saccaharina lattisima Biomass: Engineering of Alginate Properties with Maleic Anhydride Grafted Linseed Oil

    by Martin Sterner, Ulrica Edlund

    Linseed oil was graft modified with maleic anhydride and introduced into alginate by co-extrusion, producing alginate hybrid filaments. A straightforward grafting of maleic anhydride onto the oil backbone produced the modified oil. Additional esterification with n-dodecanol was also investigated. The structures of the modified oils were verified with 2D-NMR. The modified oil was mixed with alginate and extruded into CaCl2, forming thin filaments with diameters in the 130–260 μm range. The impact of oil integration into the alginate filaments was assessed, with special emphasis on stress-at-break, and compared to values predicted by an empirical model relating the “stress to alginate concentration” ratio to prevailing conditions during filament drawing. Analogous alginate filaments were prepared with hydrochloric-, oxalic- and phytic acid calcium salts for comparison with alginate–oil hybrids to reveal the induced impact, with respect to the composition and charge, on the tensile performance.


  • Open Access

    Extraction of laminarin from Saccharina latissima seaweed using cross-flow filtration

    by Martin Sterner, Fredrik Gröndahl

    Laminarin is a low-molecular-weight polysaccharide found in seaweed (kelp), often in equal concentrations to that in the commercially important hydrocolloid alginate. However, while alginate can be easily recovered by dissolution followed by acid precipitation, for laminarin, there is no such straightforward way of recovering it. Laminarin can be used as dietary fiber and, if efficiently extracted, it may be used for functional food/feed applications and as a component in plant defense stimulants for agriculture. One way of concentrating laminarin from dilute solutions is to press the solution through ultrafine membranes that the molecules cannot pass through. When alginate is extracted, an acid pretreatment step is used and the dilute acid residue from that process also contains laminarin. We used cross-flow filtration to concentrate laminarin from Saccharina latissima, retrieving it from the dilute acid solution of the acid pretreatment of an alginate extraction. Three ceramic membranes with 5, 15, and 50 kDa molecular weight cutoffs were used, and the pressure, temperature, and feed velocity were altered to reveal which parameters controlled the flow through the membrane and how efficiently laminarin was concentrated. The effects on laminarin extraction for fresh vs. frozen biomass were evaluated showing that frozen biomass releases more laminarin with a similar biomass homogenization technique. Thermal and microbial degradation of the feed components was studied during the course of the filtrations, showing that microbial degradation can affect the laminarin concentration, while the temperature of the process ~ 65 °C had little impact on laminarin. The techniques used to monitor the components in the feed and permeate during filtration were nuclear magnetic resonance, 1H-NMR, and size exclusion chromatography. The filtrations were performed in a pilot-size filtration unit with ceramic membranes (ZrO2/TiO2, TiO2-Al2O support, 0.08 m2). To be able to operate without quick membrane fouling, the most important parameter was to have a high liquid velocity over the membrane, 4.7 m s−1. A good technique to concentrate laminarin was to prefilter it through a 50-kDa membrane using 2 bar liquid pressure and to concentrate it over a 5-kDa membrane using 5-bar liquid pressure. With these settings, the liquid flux through the filter became 60–80 and 30–40 L m−2 h−1 over the 50-kDa and 5-kDa membrane.


  • Open Access

    Kelp in IMTAs: small variations in inorganic nitrogen concentrations drive different physiological responses of Saccharina latissima

    by L. Rugiu, M. S. Hargrave, S. Enge, M. Sterner, G. M. Nylund, H. Pavia

    Kelps can be included in integrated multitrophic aquaculture (IMTA) where their growth and quality might benefit from the nutrient load released by other species like finfish and mussels transforming effluents from the cultured animals into valuable products. We studied how different nutrient concentrations affect growth, photosynthesis, chemical composition and pigment content of the kelpSaccharina latissima. We exposed kelps to natural seawater, water enriched to levels of ammonium and nitrate simulating finfish cage waste (IMTA1) and a combination of such enrichment with natural effluents coming from mussels (IMTA2). The algal biomass was higher and produced elevated total organic content when exposed to both IMTA1 and IMTA2. The photosynthetic responses in terms of relative electron transfer rate (rETRmax), PSII saturation irradiance (Ek) and total nitrogen content were also positively affected by both IMTA1 and IMTA2. We found a significant enhancement in pigment content only when algae were exposed to the strongest enrichment of our study (IMTA2). Finally, we found a positive relationship between rETRmaxand growth, and the content of chlorophyllaand fucoxanthin. Our results show significant physiological responses ofS. latissimato nutrient enrichment mimicking IMTA settings, as well as the benefit of added nutrients through a boost in photosynthetic activity that leads to higher kelp biomass and pigment production. This study suggests that modest nitrogen enrichment such as the one in our IMTA2 setup is enough to generate not only higher kelp biomass, but also an increased biomass quality with potentially higher market value.


  • High-Performance Filaments from Fractionated Alginate by Polyvalent Cross-Linking: A Theoretical and Practical Approach

    by Martin Sterner, Ulrica M Edlund

    A series of alginate fractions with significant differences in molecular weight and uronic acid compositions were produced by consecutive fractionation and converted to thin and strong crosslinked polymer filaments via extrusion into calcium, aluminum, or polyaluminum (PolyAl) polyvalent solutions followed by drawing and drying. Models were elaborated to relate the alginate uronic acid composition to the tensile performance, both in the wet gel filament and in the dry filament state. The wet gel model were compared to the theory of the unidirectional elongation of charged polyelectrolyte gels based on the classical rubber elasticity of dilated polymer networks extended to include the contributions of non-Gaussian chain extensions and the effect of electrostatic interactions. The theory of equilibrium swelling pressure was applied to describe the observed shrinkage of the alginate gels following immersion in a polyvalent solution. Congruent with the theoretical model of charged gels, the tensile performance of the gel filaments prepared from CaCl2 depended on the compositional ratio of guluronic acid dyads in the alginate fraction multiplied by the alginate concentration, while the tensile behavior of wet gel filaments prepared by AlCl3 instead resembled that of elastic solid materials and depended only on the alginate concentration. The dry filament tensile properties were greatly dependent on the preparation conditions, particularly the ‘stress to alginate concentration’-ratio and the nature of the ions present during filament drawing. The PolyAl solution effectively caused shrinkage of alginate to a strong extent, and the resulting filaments behaved as highly stiff materials able to withstand stresses of approximately 500 MPa and having elastic moduli as high as 28 GPa.