Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Sun has a total of 203 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Repurposing Diels–Alder Chemistry to Access Low-Strain Monomers for Chemically Recyclable ROMP Polymers

    by Tarek Ibrahim, Md Aminur Rahman, Monica Kaczynski, Coogan Cardella, Hao Sun

    Diels–Alder reaction has been widely employed to access highly strained cyclic olefin monomers for efficient ring-opening metathesis polymerization (ROMP). However, the high ring strain energies (RSEs > 15 kcal/mol) of these traditional Diels–Alder monomers, while promoting efficient polymerization, compromise the depolymerizability of the resulting polymers, thereby limiting their chemical recyclability. Herein, we report a class of low-strain Diels–Alder monomers based on trans-succinimide-fused cyclohexenes (tSICHs), synthesized from readily available feedstocks, fumaric acid and 3-sulfolene. The relatively low RSEs of the tSICH monomers (6.1–6.2 kcal/mol) enable both efficient ROMP and ring-closing metathesis depolymerization (RCMD) through concentration-controlled metathesis equilibrium. All tSICH monomers achieved high conversions (>91%) during ROMP at an initial monomer concentration of 5 M, yielding polymers with high molecular weights (>100 kDa). Moreover, near-quantitative monomer regeneration (>95%) was achieved via RCMD at room temperature with an olefin concentration of 0.2 M. Critically, the resulting polymers exhibit highly tunable thermomechanical properties, affording a broad range of glass transition temperatures (30–78 °C) and tensile strains at break (3–550%). Overall, this work provides a new monomer design strategy that unlocks access to chemically recyclable polymers from Diels–Alder-derived ROMP monomers.

  • Open Access

    Design of a Chitinase-Responsive, Depolymerizable Petroleum-Derived Polymer for Circular and Antifouling Materials

    by Cody J. Velikaneye, Sarah Kispert, Alexis Pishnyuk, Madison Kajuffa, Devin Fauver, Bisher Lpizra, Sneh Dagar, Safi Dapetel Balkissou Wouna, Kyle P. Buckley, Tarek Ibrahim, et al.

    Petroleum-derived polymers (PDPs), including polyolefins and polyesters, combine mechanical robustness and thermal stability but persist in the environment due to chemically inert C–C backbones. Here, we report PHEVD (poly­[7-(2-hydroxyethyl)-2,4-divinyl-3-oxa-7-azabi­cyclo[3.3.0]­octane-6,8-dione]), a polymer designed to preserve PDP-relevant thermal stability and hydrophobic film performance while incorporating enzyme-addressable imide and amide motifs. Compared with polyethylene terephthalate (PET) and polyethylene (PE), PHEVD exhibits comparable thermal robustness yet undergoes rapid and near-complete depolymerization within 7 days under mild aqueous conditions in the presence of Pseudomonas aeruginosa (PAO1), with measurable degradation also observed for Chlorella vulgaris. Integrated transcriptomic, mutant, and purified-enzyme analyses implicate Chitinase-associated pathways in degradation. 1H NMR and LC-MS confirm the disappearance of parent polymer signals and the formation of low-molecular-weight, soluble products, indicating chemical depolymerization rather than persistent microplastic fragmentation. Identified degradation products correlate with biofilm-dispersion signatures, linking controlled breakdown to functional biological outcomes. By retaining PDP-like performance during use while enabling selective, biologically triggered end-of-life conversion into soluble small molecules, PHEVD demonstrates a structure-guided strategy to reduce environmental persistence relative to conventional PDPs and advance sustainable polymer design.


  • Top Cited Papers
    Open Access

    Entropy-Driven Design of Depolymerizable Polyolefins from Strained Bridged Bicyclic Monomers

    by Tarek Ibrahim, Desmond Brown, Hao Sun

    Polymers produced by ring-opening metathesis polymerization (ROMP) of strained cyclic olefin monomers, such as norbornene and cyclobutene, are challenging to depolymerize back to their constituent monomers due to their favorable polymerization thermodynamics. Current strategies for creating depolymerizable ROMP polymers focus on designing low-strain monomers with small enthalpic driving forces, which facilitate depolymerization by reducing the monomer polymerizability. Because polymerization thermodynamics is governed by both enthalpic and entropic contributions, we reason that depolymerizable polymers could be achieved from highly strained cyclic olefin monomers if the entropic penalty of polymerization is sufficiently large. Here, we present a depolymerizable polymer system based on a series of strained bicyclo[3.2.1] monomers, which combine a substantial enthalpic driving force (−6 to −11 kcal/mol) with a significant entropic penalty of polymerization (−15 to −24 cal/mol/K). The large entropic penalty, arising from the rigid polymer backbone, lowers the ceiling temperature and imparts depolymerizability to the polymer system, leading to monomer recovery (74–99%) under standard ring-closing metathesis conditions. Moreover, the enthalpic driving force remains sufficient to enable efficient ring-opening metathesis polymerization and block copolymer synthesis. This entropy-driven strategy thus unlocks access to depolymerizable polymers from strained cyclic olefin monomers that are not traditionally considered building blocks for such materials, offering a new direction for the design of chemically recyclable polymers with an expanded monomer scope.


  • Open Access

    Harnessing Biofilm-Mediated Plastic Biodegradation: Innovating Smart Material Design

    by Kaitlyn Benes, Madison Liguori, Cody J. Velikaneye, Sarah Kispert, Alexis Pishnyuk, Eddie Luzik, Hao Sun, Dequan Xiao, Huan Gu

    The persistent environmental challenges posed by synthetic plastics, particularly petroleum-derived petropolymers, such as polyethylene (PE), polypropylene (PP), and polystyrene (PS), have intensified the need for innovative recycling methods. Traditional recycling techniques often rely on harsh conditions, raising environmental and economic concerns. Biofilm-mediated biodegradation has emerged as a promising alternative, operating under mild conditions such as room temperature, neutral pH, and atmospheric pressure. However, the interactions between biofilm-forming microorganisms and synthetic plastics and the roles of secreted enzymes in these processes remain incompletely understood. This review explores the current understanding of biofilm-mediated biodegradationbiodeterioration, biofragmentation, bioassimilation, and mineralizationand the biochemical and physical interactions that control these processes. We highlight the latest findings on the enhancement of petropolymer degradation by biofilms, focusing on the roles of oxidative and attachment enzymes and the environmental factors influencing degradation efficiency. Understanding these complex interactions can inform the design of next-generation enzyme-responsive polymers that are not only easier to degrade but can also serve as smart materials for diverse applications, such as antifouling coatings on metals. This perspective bridges critical knowledge gaps and provides insights into harnessing biofilm-mediated processes for sustainable material innovation.


  • Degradable and functionalizable polyacetals synthesized via ring-opening metathesis copolymerization

    by Tarek Ibrahim, Sabita Rimal, Kiril Samiahulin, Nanzhi Zang, Hao Sun


  • Open Access

    Functional Group Transformation Approach to Chemically Recyclable Polymers from Ultra-Low to Moderate Strain Monomers

    by Tarek Ibrahim, Kaia Kendzulak, Angelo Ritacco, Melanie Monetti, Hao Sun

    Ring-opening metathesis polymerization (ROMP) has been widely used for the synthesis of functional polymers. However, most ROMP-derived polymers are nondepolymerizable, limiting their sustainability and eco-friendiness. While recent advances in designing low-strain cyclic olefin monomers have enabled the ROMP synthesis of depolymerizable polyolefins, the scope of these monomers remains limited due to the narrow range of ring strain energies (RSEs = 4.7-5.4 kcal/mol) required to allow both polymerization and depolymerization in a closed-loop recycling process. Herein, we present a new class of chemically recyclable polyolefins based on cycloheptene derivatives with RSEs ranging from 3.8 to 7.2 kcal/mol. The wide range of RSEs enabled the establishment of a structure-polymerizability-depolymerizability relationship, shedding light on the role of RSE in both polymerization and depolymerization. A functional group transformation (FGT) strategy, harnessing reversible ketone-to-acetal chemistry, was developed to overcome the low polymerizability of low-strain monomers and the moderate depolymerizability of polymers made from moderate-strain monomers. This FGT approach not only enhanced the chemical recycling of moderately depolymerizable polyolefins but also provided access to highly depolymerizable polyolefins that are challenging to synthesize through direct ROMP of ultralow strain monomers. Moreover, the thermal properties of the chemically recyclable polyolefins developed in this study are highly tunable, with a broad range of glass transition temperatures (-7 to 104 °C), highlighting their potential for various applications.


  • Towards degradable and functionalizable polymers: alternating ring-opening metathesis copolymerization of oxanorbornadiene dicarboxylate and 2,3-dihydrofuran

    by Tarek Ibrahim, Kaia Kendzulak, Syrena Carver, Tamara Perez, Hao Sun

    Here we report the design and synthesis of acid-degradable and functionalizable polymers via alternating ring-opening metathesis copolymerization of oxanorbornadiene dicarboxylate and 2,3-dihydrofuran. The resulting polymers can undergo post-polymerization modification through aza-Michael and thia-Michael additions, leading to a diverse set of degradable polymer structures with various functional groups and tunable properties.


  • Hybrid Bonding Bottlebrush Polymers Grafted from a Supramolecular Polymer Backbone

    by Tristan D. Clemons, Simon A. Egner, Joseph Grzybek, Joshua J. Roan, Hiroaki Sai, Yang Yang, Zois Syrgiannis, Hao Sun, Liam C. Palmer, Nathan C. Gianneschi, et al.

    Bottlebrush polymers, macromolecules consisting of dense polymer side chains grafted from a central polymer backbone, have unique properties resulting from this well-defined molecular architecture. With the advent of controlled radical polymerization techniques, access to these architectures has become more readily available. However, synthetic challenges remain, including the need for intermediate purification, the use of toxic solvents, and challenges with achieving long bottlebrush architectures due to backbone entanglements. Herein, we report hybrid bonding bottlebrush polymers (systems integrating covalent and noncovalent bonding of structural units) consisting of poly(sodium 4-styrenesulfonate) (p(NaSS)) brushes grafted from a peptide amphiphile (PA) supramolecular polymer backbone. This was achieved using photoinitiated electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization in water. The structure of the hybrid bonding bottlebrush architecture was characterized using cryogenic transmission electron microscopy, and its properties were probed using rheological measurements. We observed that hybrid bonding bottlebrush polymers were able to organize into block architectures containing domains with high brush grafting density and others with no observable brushes. This finding is possibly a result of dynamic behavior unique to supramolecular polymer backbones, enabling molecular exchange or translational diffusion of monomers along the length of the assemblies. The hybrid bottlebrush polymers exhibited higher solution viscosity at moderate shear, protected supramolecular polymer backbones from disassembly at high shear, and supported self-healing capabilities, depending on grafting densities. Our results demonstrate an opportunity for novel properties in easily synthesized bottlebrush polymer architectures built with supramolecular polymers that might be useful in biomedical applications or for aqueous lubrication.


  • Polyheptenamer: A chemically recyclable polyolefin enabled by the low strain of seven‐membered cycloheptene

    by Tarek Ibrahim, Jordan Martindale, Angelo Ritacco, Mia Rodriguez, Hao Sun

    Low‐strain cyclic olefin monomers, including five‐membered, six‐membered, eight‐membered, and macrocyclic rings, have been recently exploited for the synthesis of depolymerizable polyolefins via ring‐opening metathesis polymerization (ROMP). Such polyolefins can undergo ring‐closing metathesis depolymerization (RCMD) to regenerate their original monomers. Nevertheless, the depolymerization behavior of polyolefins prepared by ROMP of seven‐membered cyclic olefins, an important class of low‐strain rings, still remains unexplored. In this study, we demonstrate the chemical recycling of polyheptenamers to cycloheptene under standard RCMD conditions. Highly efficient depolymerization of polyheptenamer was enabled by Grubbs' second‐generation catalyst in toluene. It was observed that the monomer yields increased when the depolymerization temperature increased and the starting polymer concentration was reduced. A near‐quantitative monomer regeneration (>96%) was achieved within 1 h under dilute conditions (20 mM of olefins) at 60°C. Moreover, polyheptenamer exhibited a decomposition temperature above 430°C, highlighting its potential as a new class of thermally stable and chemically recyclable polymer materials.