Maria Teresa Freire
Research Subjects
Maria Teresa Freire has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- António Santos Silva
Materials Department, National Laboratory for Civil Engineering, 1700-066 Lisbon, Portugal
9 shared publications - Rosário Veiga
National Laboratory for Civil Engineering (LNEC), Av. do Brasil, 101, 1700-066 Lisbon, Portugal
7 shared publications - Jorge de Brito
University of Lisbon
6 shared publications Maria Do Rosário Veiga
3 shared publications- Francisco Javier Alejandre
Universidad de Sevilla
2 shared publications - Francisco Javier Blasco-López
Universidad de Sevilla
2 shared publications
Latest Publications
- 2 January 2026
- Published by Springer Nature
- p. 429-437
Influence of the Recycling Process on the Quality of Gypsum Binders
- 2 January 2026
- Published by Springer Nature
- p. 429-437
Influence of the Recycling Process on the Quality of Gypsum Binders
- Open Access
Degradation Model Applied to the Plasterwork of the Palace of Pedro I (Royal Alcazar of Seville)
This study proposes a model to evaluate the overall degradation condition of historical plasterworks in three different locations inside the Royal Alcazar of Seville, Spain. A Severity of Degradation Index (Sw) is proposed to establish a priority of intervention while also improving the durability and conservation of plasterworks with exceptional heritage features. The Sw is a numerical index that considers the area affected by the different anomalies, their severity, and the relative importance of each anomaly on the overall conservation condition of the plasterworks, while also considering its influence on the overall performance of the plasterworks and its propensity to generate new anomalies. Visual inspections and non-destructive tests (NDT) were adopted to evaluate the conservation condition of the plasterworks of the Palace of Pedro I, which revealed that cracking and metal fixing elements represent the most common and severe anomalies detected. The method proposed allows for a more rational and cost-effective use of resources in the conservation of patrimonial-built heritage.
Open AccessDegradation Model Applied to the Plasterwork of the Palace of Pedro I (Royal Alcazar of Seville)
This study proposes a model to evaluate the overall degradation condition of historical plasterworks in three different locations inside the Royal Alcazar of Seville, Spain. A Severity of Degradation Index (Sw) is proposed to establish a priority of intervention while also improving the durability and conservation of plasterworks with exceptional heritage features. The Sw is a numerical index that considers the area affected by the different anomalies, their severity, and the relative importance of each anomaly on the overall conservation condition of the plasterworks, while also considering its influence on the overall performance of the plasterworks and its propensity to generate new anomalies. Visual inspections and non-destructive tests (NDT) were adopted to evaluate the conservation condition of the plasterworks of the Palace of Pedro I, which revealed that cracking and metal fixing elements represent the most common and severe anomalies detected. The method proposed allows for a more rational and cost-effective use of resources in the conservation of patrimonial-built heritage.
- Open Access
Gypsum Mortars with Acacia dealbata Biomass Waste Additions: Effect of Different Fractions and Contents
In recent decades, interest in the eco-efficiency of building materials has led to numerous research projects focused on the replacement of raw materials with mineral and biomass wastes, and on the production of mortars with low-energy-consuming binders, such as gypsum. In this context, five different fractions (bark, wood, branchlets, leaves, and flowers) of Acacia dealbata—an invasive species—were evaluated as fillers for premixed gypsum mortars, at 5% and 10% (vol.) addition levels and fixed water content. Although these biomass fractions had different bulk densities (>50% of variation), all the mortars were workable, although presenting different consistencies. As expected, dry density decreased with biomass addition, but, while mortars with addition at 5% presented a slight shrinkage, a slight expansion occurred with those with 10% addition. Generally, the mechanical properties decreased with the biomass additions even if this was not always proportional to the added content. The wood fraction showed the most positive mechanical results but flexural and compressive strengths of all the tested mortars were found to be higher than the lower standard limit, justifying further studies.
Open AccessGypsum Mortars with Acacia dealbata Biomass Waste Additions: Effect of Different Fractions and Contents
In recent decades, interest in the eco-efficiency of building materials has led to numerous research projects focused on the replacement of raw materials with mineral and biomass wastes, and on the production of mortars with low-energy-consuming binders, such as gypsum. In this context, five different fractions (bark, wood, branchlets, leaves, and flowers) of Acacia dealbata—an invasive species—were evaluated as fillers for premixed gypsum mortars, at 5% and 10% (vol.) addition levels and fixed water content. Although these biomass fractions had different bulk densities (>50% of variation), all the mortars were workable, although presenting different consistencies. As expected, dry density decreased with biomass addition, but, while mortars with addition at 5% presented a slight shrinkage, a slight expansion occurred with those with 10% addition. Generally, the mechanical properties decreased with the biomass additions even if this was not always proportional to the added content. The wood fraction showed the most positive mechanical results but flexural and compressive strengths of all the tested mortars were found to be higher than the lower standard limit, justifying further studies.
- Open Access
- 13 November 2021
- Published by Associacao Profissional de Conservadores-Restauradores de Portugal in Conservar Património
- No. 41,p. 7-18
Characterisation of stucco marble coatings towards their preservation
Stucco-marble is one of the most representative decorative techniques of the Baroque period in Europe. It intends to imitate stone architectural coatings. In Portugal, between the mid‑18th century and the mid‑20th century its use was much more frequent than previously thought. The lack of information regarding these coatings endangered their preservation. To fill this gap, a survey was made in the literature on the history and terminology related to stucco‑marble and buildings where it was used were identified. Samples were collected and the mineralogical composition using x‑ray diffraction (XRD) was determined. Physical and mechanical properties, namely capillary water absorption and dynamic modulus of elasticity, were also studied. In this paper, the results obtained are presented and discussed. They allowed concluding that most of the samples are made of gypsum‑anhydrite plaster, with physical and mechanical characteristics very similar to those of the materials they intend to imitate. Terminology issues are also debated. This study aims at contributing to the preservation of a decorative technique of outstanding patrimonial value. Os revestimentos de imitação de pedra em stucco-marmo constituem uma das técnicas decorativas mais representativas do período Barroco na Europa. Em Portugal, entre meados do século XVIII e meados do século XX, a sua utilização foi bastante mais frequente do que se pensava. A falta de informação relativa a estes revestimentos tem posto em perigo a sua preservação. Com vista a colmatar esta lacuna, foi feito um levantamento na literatura sobre a história e a terminologia associadas à técnica de stucco-marmo, identificaram‑se alguns casos de estudo em Portugal e recolheram-se amostras, procedendo-se à sua caracterização mineralógica por difracção de raios X (DRX) e à determinação de algumas propriedades físicas e mecânicas, nomeadamente absorção de água por capilaridade e módulo de elasticidade dinâmico. Neste artigo, apresentam-se e discutem-se os resultados obtidos, os quais permitiram concluir que a maioria das amostras é constituída por gesso e anidrite, possuindo características físicas e mecânicas muito semelhantes às dos materiais que pretendem imitar. Debatem-se, ainda, questões de terminologia. Pretende‑se, assim, contribuir para a preservação destes revestimentos, de incalculável valor patrimonial.
- 13 November 2021
- Published by Associacao Profissional de Conservadores-Restauradores de Portugal in Conservar Património
- No. 41,p. 7-18
Open AccessCharacterisation of stucco marble coatings towards their preservation
Stucco-marble is one of the most representative decorative techniques of the Baroque period in Europe. It intends to imitate stone architectural coatings. In Portugal, between the mid‑18th century and the mid‑20th century its use was much more frequent than previously thought. The lack of information regarding these coatings endangered their preservation. To fill this gap, a survey was made in the literature on the history and terminology related to stucco‑marble and buildings where it was used were identified. Samples were collected and the mineralogical composition using x‑ray diffraction (XRD) was determined. Physical and mechanical properties, namely capillary water absorption and dynamic modulus of elasticity, were also studied. In this paper, the results obtained are presented and discussed. They allowed concluding that most of the samples are made of gypsum‑anhydrite plaster, with physical and mechanical characteristics very similar to those of the materials they intend to imitate. Terminology issues are also debated. This study aims at contributing to the preservation of a decorative technique of outstanding patrimonial value. Os revestimentos de imitação de pedra em stucco-marmo constituem uma das técnicas decorativas mais representativas do período Barroco na Europa. Em Portugal, entre meados do século XVIII e meados do século XX, a sua utilização foi bastante mais frequente do que se pensava. A falta de informação relativa a estes revestimentos tem posto em perigo a sua preservação. Com vista a colmatar esta lacuna, foi feito um levantamento na literatura sobre a história e a terminologia associadas à técnica de stucco-marmo, identificaram‑se alguns casos de estudo em Portugal e recolheram-se amostras, procedendo-se à sua caracterização mineralógica por difracção de raios X (DRX) e à determinação de algumas propriedades físicas e mecânicas, nomeadamente absorção de água por capilaridade e módulo de elasticidade dinâmico. Neste artigo, apresentam-se e discutem-se os resultados obtidos, os quais permitiram concluir que a maioria das amostras é constituída por gesso e anidrite, possuindo características físicas e mecânicas muito semelhantes às dos materiais que pretendem imitar. Debatem-se, ainda, questões de terminologia. Pretende‑se, assim, contribuir para a preservação destes revestimentos, de incalculável valor patrimonial.
- 1 July 2021
- Published by Elsevier in Cement and Concrete Composites
- Vol. 120
Restoration of ancient gypsum-based plasters: Design of compatible materials
- 1 July 2021
- Published by Elsevier in Cement and Concrete Composites
- Vol. 120
Restoration of ancient gypsum-based plasters: Design of compatible materials
- 31 May 2020
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 14 (7) , 977-993
Stucco Marble in the Portuguese Architecture: Multi-analytical Characterisation
The presence of stucco marble in the Portuguese architecture is not surveyed and studies addressing the materials used to produce it are almost inexistent. In this paper, the results of the multi-analytical characterisation using XRD, SEM-EDS, Py-GC/MS and the determination of capillary water absorption and dynamic modulus of elasticity of 15 samples belonging to seven case studies are presented and discussed. XRD showed that gypsum is the main constituent, but anhydrite is also present in most samples. These results were consistent with the observations by SEM-EDS, attesting temperatures of calcination above 350ºC. The use of a multiphase gypsum plaster as a binder was probably intentional. The treatment of the surfaces, which is used to obtain an aesthetical appearance similar to the natural stone, has also a major influence in the main properties of the final materials. The search for organic compounds showed the presence of animal glues in the inner core and beeswax and oils at the surface. The dynamic moduli of elasticity are extremely high in the samples incorporating anhydrite and the capillary water absorption is almost inexistent. The results obtained intend to contribute to promote sustainable interventions on this type of materials, namely the future development of compatible restoration products.
- 31 May 2020
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 14 (7) , 977-993
Stucco Marble in the Portuguese Architecture: Multi-analytical Characterisation
The presence of stucco marble in the Portuguese architecture is not surveyed and studies addressing the materials used to produce it are almost inexistent. In this paper, the results of the multi-analytical characterisation using XRD, SEM-EDS, Py-GC/MS and the determination of capillary water absorption and dynamic modulus of elasticity of 15 samples belonging to seven case studies are presented and discussed. XRD showed that gypsum is the main constituent, but anhydrite is also present in most samples. These results were consistent with the observations by SEM-EDS, attesting temperatures of calcination above 350ºC. The use of a multiphase gypsum plaster as a binder was probably intentional. The treatment of the surfaces, which is used to obtain an aesthetical appearance similar to the natural stone, has also a major influence in the main properties of the final materials. The search for organic compounds showed the presence of animal glues in the inner core and beeswax and oils at the surface. The dynamic moduli of elasticity are extremely high in the samples incorporating anhydrite and the capillary water absorption is almost inexistent. The results obtained intend to contribute to promote sustainable interventions on this type of materials, namely the future development of compatible restoration products.
- 28 November 2019
- Published by Taylor & Francis
- p. 375-379
Modelling of the conservation state of gypsum-based plasters in the Real Alcazar of Seville
Plasterworks are gypsum-based decorative elements characteristic of Muslim art, providing a relevant historical and patrimonial heritage. Its natural ageing, associated with the action of degradation agents led to the appearance of anomalies, requiring the adoption of adequate and regular maintenance strategies. The Real Alcazar of Seville (Spain), presents an extensive area of decorative plasters, and the establishment of a hierarchy of preventive conservation can be a very difficult task. In this study, a model to evaluate the overall degradation condition of plasterworks is proposed, based on a numerical index, called severity of degradation (Sw ), which contemplates: i) the area affected by the different anomalies that can occur; ii) their severity, through the adoption of various degradation levels; iii) and the relative importance of each anomaly. The evaluation of the degradation condition is performed through visual inspections and through the application of non-destructive tests and image analysis.
- 28 November 2019
- Published by Taylor & Francis
- p. 375-379
Modelling of the conservation state of gypsum-based plasters in the Real Alcazar of Seville
Plasterworks are gypsum-based decorative elements characteristic of Muslim art, providing a relevant historical and patrimonial heritage. Its natural ageing, associated with the action of degradation agents led to the appearance of anomalies, requiring the adoption of adequate and regular maintenance strategies. The Real Alcazar of Seville (Spain), presents an extensive area of decorative plasters, and the establishment of a hierarchy of preventive conservation can be a very difficult task. In this study, a model to evaluate the overall degradation condition of plasterworks is proposed, based on a numerical index, called severity of degradation (Sw ), which contemplates: i) the area affected by the different anomalies that can occur; ii) their severity, through the adoption of various degradation levels; iii) and the relative importance of each anomaly. The evaluation of the degradation condition is performed through visual inspections and through the application of non-destructive tests and image analysis.
- 2 September 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (9) , 1285-1300
Vernacular Earthen Buildings from Leiria, Portugal – Material Characterization
In Portugal, a large number of vernacular earthen buildings present an advanced state of degradation. These buildings comprise historical, technological, architectonic, cultural and social recognized values and, therefore, efficient interventions are needed for their conservation. The knowledge of the properties that the materials used in their construction show nowadays is one of the bases to support future interventions. Unstabilized earthen samples were collected from the walls of six earthen buildings located in the region of Leiria, Portugal, built with rammed earth and/or adobe masonry. The samples were characterized by particle size distribution and through XRD, density, capillary absorption, drying, dry abrasion, compressive and tensile flexural strength. Mechanical results of rammed earth were lower than adobe’s, contrary to what was commonly found in other studies, and capillary coefficients of adobe were comparable to lime-stabilized adobe from other regions. A surface protection by compatible renders, respectively, earthen-based and air lime-based, is strongly encouraged to extend the walls durability. Although based on a short sampling, this data gives initial support to future compatible, effective and reversible interventions in Leiria vernacular earthen buildings, contributing to the preservation of this earth-built heritage.
- 2 September 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (9) , 1285-1300
Vernacular Earthen Buildings from Leiria, Portugal – Material Characterization
In Portugal, a large number of vernacular earthen buildings present an advanced state of degradation. These buildings comprise historical, technological, architectonic, cultural and social recognized values and, therefore, efficient interventions are needed for their conservation. The knowledge of the properties that the materials used in their construction show nowadays is one of the bases to support future interventions. Unstabilized earthen samples were collected from the walls of six earthen buildings located in the region of Leiria, Portugal, built with rammed earth and/or adobe masonry. The samples were characterized by particle size distribution and through XRD, density, capillary absorption, drying, dry abrasion, compressive and tensile flexural strength. Mechanical results of rammed earth were lower than adobe’s, contrary to what was commonly found in other studies, and capillary coefficients of adobe were comparable to lime-stabilized adobe from other regions. A surface protection by compatible renders, respectively, earthen-based and air lime-based, is strongly encouraged to extend the walls durability. Although based on a short sampling, this data gives initial support to future compatible, effective and reversible interventions in Leiria vernacular earthen buildings, contributing to the preservation of this earth-built heritage.
- 4 July 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (4) , 580-592
Study of the Influence of Limewash on the Conservation of Islamic Plasterworks through Weathering Tests
In a previous study, a layer of limewash was detected over the gypsum plasterworks used to decorate different spaces of the Real Alcázar of Seville such as interior rooms, patios and outdoor galleries. In this paper its use is analysed, namely whether it improves the properties of the plasterworks and provides a protective effect, through accelerated weathering tests designed specifically to reproduce real environmental conditions. Plaster specimens with similar composition and physical characteristics to those of the original plasterworks were prepared. After the cure of the specimens, the application of a layer of limewash was made. Samples were subjected to weathering tests that consist of water absorption cycles (by capillarity and immersion) and drying. The results showed that the application of limewash did not improve the durability of the plaster significantly, although seemed to have a more protective effect against weathering by capillarity tests in the specimens prepared with a higher water/plaster ratio. In fact, after the immersion tests a great part of the limewash layer became detached, while in the plasterworks of the Real Alcázar this behaviour has not been observed. So, capillarity tests seem to be more adequate to reproduce the real weathering conditions of these ornamental elements.
- 4 July 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (4) , 580-592
Study of the Influence of Limewash on the Conservation of Islamic Plasterworks through Weathering Tests
In a previous study, a layer of limewash was detected over the gypsum plasterworks used to decorate different spaces of the Real Alcázar of Seville such as interior rooms, patios and outdoor galleries. In this paper its use is analysed, namely whether it improves the properties of the plasterworks and provides a protective effect, through accelerated weathering tests designed specifically to reproduce real environmental conditions. Plaster specimens with similar composition and physical characteristics to those of the original plasterworks were prepared. After the cure of the specimens, the application of a layer of limewash was made. Samples were subjected to weathering tests that consist of water absorption cycles (by capillarity and immersion) and drying. The results showed that the application of limewash did not improve the durability of the plaster significantly, although seemed to have a more protective effect against weathering by capillarity tests in the specimens prepared with a higher water/plaster ratio. In fact, after the immersion tests a great part of the limewash layer became detached, while in the plasterworks of the Real Alcázar this behaviour has not been observed. So, capillarity tests seem to be more adequate to reproduce the real weathering conditions of these ornamental elements.
- 1 March 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 202, 319-331
Studies in ancient gypsum based plasters towards their repair: Physical and mechanical properties
- 1 March 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 202, 319-331
Studies in ancient gypsum based plasters towards their repair: Physical and mechanical properties