James William Murray
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
James William Murray has a total of 343 co-authors. Here are the top co-authors by number of shared publications:
- Burak Veli Kabasakal
School of Biochemistry, University of Bristol, University Walk, Bristol BS8 1TD, U.K.
10 shared publications - A. William Rutherford
Department of Life Sciences, Imperial College London, London, UK
9 shared publications - Elspeth Frances Garman
Department of Biochemistry, University of Oxford, Oxford, UK
8 shared publications - Charles A. R. Cotton
Max Planck Institute for Molecular Plant Physiology
7 shared publications James Barber
Department of Life Sciences, Imperial College London, London SW7 2AZ, United Kingdom
7 shared publications- Peter Julian Nixon
Sir Ernst Chain Building-Wolfson Laboratories, Department of Life Sciences, Imperial College London, S. Kensington Campus, London, UK
7 shared publications
Latest Publications
- Open Access
- 15 September 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (10) , 1155-1168
Separating the effects of temperature and absorbed X-ray dose on unit-cell volume
The behaviour of the unit-cell volume of crystals of the iron-storage molecule ferritin, both in the apo and the holo form, and of influenza A virus subtype N9 neuraminidase at 100 K and over a controlled cryo-temperature series was investigated. The purpose of this study was to separate out the effects of dose and temperature on the protein by assessing the changes in the unit-cell volume. Over the wide range of X-ray doses examined in this work, the irreversible effect of dose on the unit-cell volume could be distinguished from the reversible (below 160 K) temperature-induced effects. Specific structural damage effects were not reversible.
- 15 September 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (10) , 1155-1168
Open AccessSeparating the effects of temperature and absorbed X-ray dose on unit-cell volume
The behaviour of the unit-cell volume of crystals of the iron-storage molecule ferritin, both in the apo and the holo form, and of influenza A virus subtype N9 neuraminidase at 100 K and over a controlled cryo-temperature series was investigated. The purpose of this study was to separate out the effects of dose and temperature on the protein by assessing the changes in the unit-cell volume. Over the wide range of X-ray doses examined in this work, the irreversible effect of dose on the unit-cell volume could be distinguished from the reversible (below 160 K) temperature-induced effects. Specific structural damage effects were not reversible.
- Open Access
- 17 August 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (34)
Random repeats open a route into folded protein space
- 17 August 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (34)
Open AccessRandom repeats open a route into folded protein space
- Open Access
- 6 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Mapping the absorption landscape of far-red Photosystem II
Far-red light photoacclimation enables some cyanobacteria to survive in white-light-depleted environments by extending the red limit of photosynthesis. In far-red Photosystem II, paralogous subunits replace their canonical counterparts, allowing the incorporation of some chlorophyll f molecules and one chlorophyll d that are red-shifted and spectrally distinct from the chlorophyll a manifold, and from each other. Here, we present a comparative study of far-red Photosystem II from Chroococcidiopsis thermalis PCC 7203 and Calothrix sp. NIES-3974. In C. thermalis , the cryo-electron microscopy structure reveals the far-red-exclusive subunit, PsbH2’, which forms part of a chlorophyll f binding site. We also assign four chlorophyll f sites using sequence comparisons and electrostatic potential analyses. In Calothrix, psbH2’ is absent, and the same analyses show that only two of these chlorophyll f sites are present. Comparative phylogenetic, structural, and spectroscopic analyses allow the assignment of specific wavelengths to all the red-shifted chlorophylls. This provides the framework needed to model excitation energy transfer in far-red Photosystem II, and to understand the conserved features that allow survival under far-red light.
- 6 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessMapping the absorption landscape of far-red Photosystem II
Far-red light photoacclimation enables some cyanobacteria to survive in white-light-depleted environments by extending the red limit of photosynthesis. In far-red Photosystem II, paralogous subunits replace their canonical counterparts, allowing the incorporation of some chlorophyll f molecules and one chlorophyll d that are red-shifted and spectrally distinct from the chlorophyll a manifold, and from each other. Here, we present a comparative study of far-red Photosystem II from Chroococcidiopsis thermalis PCC 7203 and Calothrix sp. NIES-3974. In C. thermalis , the cryo-electron microscopy structure reveals the far-red-exclusive subunit, PsbH2’, which forms part of a chlorophyll f binding site. We also assign four chlorophyll f sites using sequence comparisons and electrostatic potential analyses. In Calothrix, psbH2’ is absent, and the same analyses show that only two of these chlorophyll f sites are present. Comparative phylogenetic, structural, and spectroscopic analyses allow the assignment of specific wavelengths to all the red-shifted chlorophylls. This provides the framework needed to model excitation energy transfer in far-red Photosystem II, and to understand the conserved features that allow survival under far-red light.
- Open Access
- 19 May 2026
- Published by Wiley in The Plant Journal
- Vol. 126 (4) , e70925
Recent advances in the structural biology of photosystem II
SUMMARY: Photosystem II (PSII) is the membrane protein‐pigment complex responsible for the light‐driven oxidation of water to molecular oxygen, a reaction that enables the aerobic biosphere and powers biological carbon fixation. Over the past two decades, structural biology has transformed our understanding of PSII from low‐resolution outlines of its protein chains and cofactors to near‐atomic resolution models. Early X‐ray crystallographic structures from thermophilic cyanobacteria established the architecture of the reaction centre and the Mn 4 CaO 5 oxygen‐evolving complex (OEC), defining the protein ligands and cofactor network that support charge separation and water oxidation. The advent of high‐resolution single‐particle cryo‐EM microscopy has expanded structural coverage across taxa, assembly and repair intermediates, and PSII–antenna supercomplexes that are beyond crystallisation. CryoEM now routinely achieves sub‐2.5 Å resolution. In situ cryo‐EM tomography further bridges atomic models to the native thylakoid membrane environment, exposing the supramolecular organisation of PSII in cells. X‐ray free electron laser (XFEL) pump–probe experiments provide time‐resolved snapshots of the Kok S‐state cycle, revealing substrate water insertion, metal–oxo rearrangements and approaches O–O bond formation. Despite these advances, key challenges remain, including unambiguous assignment of manganese oxidation states, direct localisation of hydrogen atoms and complete structural characterisation of transient S‐state intermediates. Integration of structural methods with spectroscopy, computation and emerging protein design approaches promises not only deeper mechanistic insight into biological water oxidation, but also guidance for the development of robust, earth‐abundant catalysts.
- 19 May 2026
- Published by Wiley in The Plant Journal
- Vol. 126 (4) , e70925
Open AccessRecent advances in the structural biology of photosystem II
SUMMARY: Photosystem II (PSII) is the membrane protein‐pigment complex responsible for the light‐driven oxidation of water to molecular oxygen, a reaction that enables the aerobic biosphere and powers biological carbon fixation. Over the past two decades, structural biology has transformed our understanding of PSII from low‐resolution outlines of its protein chains and cofactors to near‐atomic resolution models. Early X‐ray crystallographic structures from thermophilic cyanobacteria established the architecture of the reaction centre and the Mn 4 CaO 5 oxygen‐evolving complex (OEC), defining the protein ligands and cofactor network that support charge separation and water oxidation. The advent of high‐resolution single‐particle cryo‐EM microscopy has expanded structural coverage across taxa, assembly and repair intermediates, and PSII–antenna supercomplexes that are beyond crystallisation. CryoEM now routinely achieves sub‐2.5 Å resolution. In situ cryo‐EM tomography further bridges atomic models to the native thylakoid membrane environment, exposing the supramolecular organisation of PSII in cells. X‐ray free electron laser (XFEL) pump–probe experiments provide time‐resolved snapshots of the Kok S‐state cycle, revealing substrate water insertion, metal–oxo rearrangements and approaches O–O bond formation. Despite these advances, key challenges remain, including unambiguous assignment of manganese oxidation states, direct localisation of hydrogen atoms and complete structural characterisation of transient S‐state intermediates. Integration of structural methods with spectroscopy, computation and emerging protein design approaches promises not only deeper mechanistic insight into biological water oxidation, but also guidance for the development of robust, earth‐abundant catalysts.
- Open Access
- 1 January 2026
- Published by Bio-Protocol, LLC in Bio-Protocol
Low-cost Medium-Throughput Protein Expression and Purification in E. coli
As the cost of synthetic gene synthesis has decreased, more laboratories have access to large libraries of synthetic genes from which to express and purify proteins. However, current protocols for protein expression and purification are either too slow and laborious to work at large-scale, or require specialist equipment, such as robotic liquid handlers. Since many researchers work at a level between these extremes, we present a medium-throughput protocol to express and purify libraries of up to hundreds of genes using standard lab equipment and inexpensive consumables. This protocol includes the cloning, transformation, expression and Ni-NTA purification of up to 96 genes in parallel from E. coli culture volumes of 5-100 mL. The protocol was developed for screening expression of de novo proteins, but has applications in buffer trials, enzymatic assays, binding studies, and biophysical characterization. Key featuresExpression and purification protocol of synthetic gene libraries comprising hundreds of genes in E. coliInexpensive method designed to work without requiring specialist lab equipment5-day protocol from synthetic genes to validation with SDS-PAGE gel of protein presence Keywords: Protein purification, Ni-NTA, screening, medium-throughput This protocol is used in: Communications Chemistry (2026), DOI: 10.1038/s42004-025-01817-3 Graphical overview BackgroundOver the last 30 years, synthetic DNA sequences have become cheaper, longer, and more accurate. Commercially synthesized DNA fragments are priced as low as $0.07 per base and have lengths of up to 10 kilobases [1], giving more researchers access to large libraries of synthetic genes. This makes it possible to purify many proteins in parallel for use in applications such as antibody screening, enzyme activity comparisons, or optimization of designed proteins. However, traditional low-throughput protein purification methods, such as fast protein liquid chromatography (FPLC), produce large quantities of purified protein but are poorly suited to purifying more than one protein at a time. Alternatively, small-scale high-throughput methods are designed to purify thousands of proteins, often using liquid-handling robots. These robots are often inaccessible to small laboratories because even low-cost models, such as the Opentrons OT-2, are priced at ~$20,000-$30,000; high-end models may cost as much as $150,000 [2]. There are also non-automated high-throughput methods, but they often require specialist equipment like vacuum manifolds and large numbers of purification columns [3]. Both automated and non-automated high-throughput methods often use culture volumes of ~1 mL, which makes the yield too small for many downstream biophysical and biochemical applications such as activity assays, circular dichroism, cryo-EM, small-angle X-ray scattering, or isothermal titration calorimetry [4]. After finding that published methods gave insufficient yield and were too costly for a synthetic protein screening experiment, we developed this method to serve as a middle ground – a protocol that is cheap, fast, high-yield, requires no costly or specialized equipment, but can still purify up to 96 proteins in parallel. This protocol describes the full process from synthetic gene fragments to purified protein, including Golden Gate assembly, plasmid transformation in E. coli, expression, chemical lysis, and Ni-NTA affinity purification using 96-well fritted plates. We demonstrate the purification of 17 proteins from 50 mL E. coli cultures with yields of up to ~2 mg, showing that the protocol generalizes to applications that require large amounts of protein, including enzyme kinetic assays, interaction and binding studies, biophysical characterization, and potentially even crystallization screening. Materials and reagentsBiological materials1. Single Step (KRX) Competent Cells (Promega, catalog number: L3002)2. pHT453 (EDEV_HU; 6,346 bp), for expression with an N-terminal His6–ubiquitin fusion (Addgene plasmid # 262907).3. pHT461 (EDEV_ATG; 6,058 bp), for expression without a vector-encoded N-terminal affinity tag (Addgene plasmid # 262908).4. pHT462 (EDEV_His_only; 6,088 bp), for expression with an N-terminal His6 tag (Addgene plasmid # 262909).5. pHT463 (EDEV_HT; 6,112 bp), for expression with an N-terminal His6 tag and thrombin cleavage site (Addgene plasmid # 262910).The four EDEV plasmids are deposited with Addgene. All carry a T7/lac expression region, lacI, a kanamycin-resistance gene and a tsPurple dropout cassette flanked by SapI sites (Figure 1). Annotated GenBank files are provided in Supplementary Data 1. Select the backbone and insert junctions as described in Procedure A1.Figure 1. EDEV plasmids for SapI Golden Gate cloning and protein expression. (A) pHT453, His6–ubiquitin; (B) pHT461, no vector-encoded affinity tag; (C) pHT462, His6; and (D) pHT463, His6–thrombin. SapI digestion removes the tsPurple dropout cassette. The target-coding-strand junctions are AGT/TAA for pHT453, pHT462 and pHT463, and ATG/TAA for pHT461. Arrows indicate coding-sequence orientation; red ticks mark SapI cleavage sites. KanR, kanamycin resistance; ori, replication origin; Ub, ubiquitin; Thr, thrombin cleavage site. Maps show selected features. Reagents1. SapI (New England Biolabs, catalog number: R0569S)2. T4 DNA ligase (New England Biolabs, catalog number: M0202S). Note: Make aliquots of T4 DNA ligase buffer and use only freshly thawed aliquots for reaction.3. Kanamycin (Melford, catalog number: K0126-5G) working concentration: 50 μg/ml4. Lysogeny broth (LB) powder (Millipore, catalog number: 51208-2.5KG-F)5. Terrific broth (TB) powder (Melford, catalog number: T15000-5000.0)6. Agar (Millipore, catalog number: 05040-1KG)7. L-Rhamnose (Melford, catalogue number: 10030-85-0)8. IPTG (Melford, catalog number: MB1008-25G)9. D-Glucose (Thermo Fisher Scientific, catalog number: A16828.36)10. Glycerol (Thermo Fisher Scientific, catalog...
- 1 January 2026
- Published by Bio-Protocol, LLC in Bio-Protocol
Open AccessLow-cost Medium-Throughput Protein Expression and Purification in E. coli
As the cost of synthetic gene synthesis has decreased, more laboratories have access to large libraries of synthetic genes from which to express and purify proteins. However, current protocols for protein expression and purification are either too slow and laborious to work at large-scale, or require specialist equipment, such as robotic liquid handlers. Since many researchers work at a level between these extremes, we present a medium-throughput protocol to express and purify libraries of up to hundreds of genes using standard lab equipment and inexpensive consumables. This protocol includes the cloning, transformation, expression and Ni-NTA purification of up to 96 genes in parallel from E. coli culture volumes of 5-100 mL. The protocol was developed for screening expression of de novo proteins, but has applications in buffer trials, enzymatic assays, binding studies, and biophysical characterization. Key featuresExpression and purification protocol of synthetic gene libraries comprising hundreds of genes in E. coliInexpensive method designed to work without requiring specialist lab equipment5-day protocol from synthetic genes to validation with SDS-PAGE gel of protein presence Keywords: Protein purification, Ni-NTA, screening, medium-throughput This protocol is used in: Communications Chemistry (2026), DOI: 10.1038/s42004-025-01817-3 Graphical overview BackgroundOver the last 30 years, synthetic DNA sequences have become cheaper, longer, and more accurate. Commercially synthesized DNA fragments are priced as low as $0.07 per base and have lengths of up to 10 kilobases [1], giving more researchers access to large libraries of synthetic genes. This makes it possible to purify many proteins in parallel for use in applications such as antibody screening, enzyme activity comparisons, or optimization of designed proteins. However, traditional low-throughput protein purification methods, such as fast protein liquid chromatography (FPLC), produce large quantities of purified protein but are poorly suited to purifying more than one protein at a time. Alternatively, small-scale high-throughput methods are designed to purify thousands of proteins, often using liquid-handling robots. These robots are often inaccessible to small laboratories because even low-cost models, such as the Opentrons OT-2, are priced at ~$20,000-$30,000; high-end models may cost as much as $150,000 [2]. There are also non-automated high-throughput methods, but they often require specialist equipment like vacuum manifolds and large numbers of purification columns [3]. Both automated and non-automated high-throughput methods often use culture volumes of ~1 mL, which makes the yield too small for many downstream biophysical and biochemical applications such as activity assays, circular dichroism, cryo-EM, small-angle X-ray scattering, or isothermal titration calorimetry [4]. After finding that published methods gave insufficient yield and were too costly for a synthetic protein screening experiment, we developed this method to serve as a middle ground – a protocol that is cheap, fast, high-yield, requires no costly or specialized equipment, but can still purify up to 96 proteins in parallel. This protocol describes the full process from synthetic gene fragments to purified protein, including Golden Gate assembly, plasmid transformation in E. coli, expression, chemical lysis, and Ni-NTA affinity purification using 96-well fritted plates. We demonstrate the purification of 17 proteins from 50 mL E. coli cultures with yields of up to ~2 mg, showing that the protocol generalizes to applications that require large amounts of protein, including enzyme kinetic assays, interaction and binding studies, biophysical characterization, and potentially even crystallization screening. Materials and reagentsBiological materials1. Single Step (KRX) Competent Cells (Promega, catalog number: L3002)2. pHT453 (EDEV_HU; 6,346 bp), for expression with an N-terminal His6–ubiquitin fusion (Addgene plasmid # 262907).3. pHT461 (EDEV_ATG; 6,058 bp), for expression without a vector-encoded N-terminal affinity tag (Addgene plasmid # 262908).4. pHT462 (EDEV_His_only; 6,088 bp), for expression with an N-terminal His6 tag (Addgene plasmid # 262909).5. pHT463 (EDEV_HT; 6,112 bp), for expression with an N-terminal His6 tag and thrombin cleavage site (Addgene plasmid # 262910).The four EDEV plasmids are deposited with Addgene. All carry a T7/lac expression region, lacI, a kanamycin-resistance gene and a tsPurple dropout cassette flanked by SapI sites (Figure 1). Annotated GenBank files are provided in Supplementary Data 1. Select the backbone and insert junctions as described in Procedure A1.Figure 1. EDEV plasmids for SapI Golden Gate cloning and protein expression. (A) pHT453, His6–ubiquitin; (B) pHT461, no vector-encoded affinity tag; (C) pHT462, His6; and (D) pHT463, His6–thrombin. SapI digestion removes the tsPurple dropout cassette. The target-coding-strand junctions are AGT/TAA for pHT453, pHT462 and pHT463, and ATG/TAA for pHT461. Arrows indicate coding-sequence orientation; red ticks mark SapI cleavage sites. KanR, kanamycin resistance; ori, replication origin; Ub, ubiquitin; Thr, thrombin cleavage site. Maps show selected features. Reagents1. SapI (New England Biolabs, catalog number: R0569S)2. T4 DNA ligase (New England Biolabs, catalog number: M0202S). Note: Make aliquots of T4 DNA ligase buffer and use only freshly thawed aliquots for reaction.3. Kanamycin (Melford, catalog number: K0126-5G) working concentration: 50 μg/ml4. Lysogeny broth (LB) powder (Millipore, catalog number: 51208-2.5KG-F)5. Terrific broth (TB) powder (Melford, catalog number: T15000-5000.0)6. Agar (Millipore, catalog number: 05040-1KG)7. L-Rhamnose (Melford, catalogue number: 10030-85-0)8. IPTG (Melford, catalog number: MB1008-25G)9. D-Glucose (Thermo Fisher Scientific, catalog number: A16828.36)10. Glycerol (Thermo Fisher Scientific, catalog...
- 11 December 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 390 (6778) , eado6830
Locating the missing chlorophylls f in far-red photosystem I
The discovery of chlorophyll f–containing photosystems, with their long-wavelength photochemistry, represented a distinct, low-energy paradigm for oxygenic photosynthesis. Structural studies on chlorophyll f–containing photosystem I could identify some chlorophyll f sites, but none among the photochemically active pigments, and thus concluded that chlorophyll f plays no photochemical role. Here, we report two cryo–electron microscopy structures of far-red photosystem I from Chroococcidiopsis thermalis PCC 7203, allowing the assignment of eight chlorophyll f molecules, including the redox active A −1B . Simulations of absorption difference spectra induced by charge separation indicated that the experimental spectra can be reproduced only by considering the presence of a chlorophyll f at the A −1B site. The chlorophyll f locations, wavelength assignments, and conserved far-red–specific residues provide functional insights for efficient use of long-wavelength photons.
- 11 December 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 390 (6778) , eado6830
Locating the missing chlorophylls f in far-red photosystem I
The discovery of chlorophyll f–containing photosystems, with their long-wavelength photochemistry, represented a distinct, low-energy paradigm for oxygenic photosynthesis. Structural studies on chlorophyll f–containing photosystem I could identify some chlorophyll f sites, but none among the photochemically active pigments, and thus concluded that chlorophyll f plays no photochemical role. Here, we report two cryo–electron microscopy structures of far-red photosystem I from Chroococcidiopsis thermalis PCC 7203, allowing the assignment of eight chlorophyll f molecules, including the redox active A −1B . Simulations of absorption difference spectra induced by charge separation indicated that the experimental spectra can be reproduced only by considering the presence of a chlorophyll f at the A −1B site. The chlorophyll f locations, wavelength assignments, and conserved far-red–specific residues provide functional insights for efficient use of long-wavelength photons.
- Open Access
- 9 December 2025
- Published by MDPI AG in Preprints.org
Groundbreaking Structural Advances in Key Catalysts for Nitrogen and Carbon Fixation: Past, Present and Future
Photosynthesis, a crucial component of the global carbon cycle, and biological nitrogen fixation (BNF), a key step in the nitrogen cycle, are both requisite for maintaining life and sustainable agriculture on Earth, in which chlorophyll and nitrogenase play central roles, respectively. In chlorophyll biosynthesis, the reduction of protochlorophyllide to chlorophyllide is catalyzed by either the nitrogenase-like, light-independent DPOR (dark-operative protochlorophyllide oxidoreductase) or the SDR-like, light-dependent LPOR (light-driven protochlorophyllide oxidoreductase), utilizing chemical and light energy. Nitrogenase (N2ase) is the only enzyme capable of reducing inert atmospheric nitrogen, yet only a few bacterial species possess the multi-subunit ATP-dependent dinitrogen reductase. Over the past three decades, significant progress has been made in solving the crystal structures of N2ase, DPOR, and LPOR protein complex, providing valuable mechanistic insights into N2ase, as well as the contrasting structures of the multi-subunit DPOR and single-subunit LPOR. We summarize the structural breakthroughs of these key catalysts for nitrogen and carbon fixation. Protein structural similarities often hint at similar functions and evolutionary relationships. With the ongoing development in protein structure annotation assisted by AlphaFold and the identification of protein structure similarities through structural alignment software, the evolutionary relationship between these key enzymes in photosynthesis and nitrogen fixation, as well as the potential co-origin of these processes, has been uncovered. We further summarize how a porphyrin reduction catalyst evolves from a less efficient ATP-driven DPOR to a highly efficient light-driven LPOR. The key structural milestones achieved in N2ase, DPOR, and LPOR research laid the groundwork for future perspectives, particularly in proposing a direction for a potential nitrogen-fixing scenario using an AI-designed LUN and photosynthesis with bacteriochlorophyll using a light-driven chlide reductase (LCOR), leading to the development of more effective forms of biological nitrogen fixation and photosynthesis.
- 9 December 2025
- Published by MDPI AG in Preprints.org
Open AccessGroundbreaking Structural Advances in Key Catalysts for Nitrogen and Carbon Fixation: Past, Present and Future
Photosynthesis, a crucial component of the global carbon cycle, and biological nitrogen fixation (BNF), a key step in the nitrogen cycle, are both requisite for maintaining life and sustainable agriculture on Earth, in which chlorophyll and nitrogenase play central roles, respectively. In chlorophyll biosynthesis, the reduction of protochlorophyllide to chlorophyllide is catalyzed by either the nitrogenase-like, light-independent DPOR (dark-operative protochlorophyllide oxidoreductase) or the SDR-like, light-dependent LPOR (light-driven protochlorophyllide oxidoreductase), utilizing chemical and light energy. Nitrogenase (N2ase) is the only enzyme capable of reducing inert atmospheric nitrogen, yet only a few bacterial species possess the multi-subunit ATP-dependent dinitrogen reductase. Over the past three decades, significant progress has been made in solving the crystal structures of N2ase, DPOR, and LPOR protein complex, providing valuable mechanistic insights into N2ase, as well as the contrasting structures of the multi-subunit DPOR and single-subunit LPOR. We summarize the structural breakthroughs of these key catalysts for nitrogen and carbon fixation. Protein structural similarities often hint at similar functions and evolutionary relationships. With the ongoing development in protein structure annotation assisted by AlphaFold and the identification of protein structure similarities through structural alignment software, the evolutionary relationship between these key enzymes in photosynthesis and nitrogen fixation, as well as the potential co-origin of these processes, has been uncovered. We further summarize how a porphyrin reduction catalyst evolves from a less efficient ATP-driven DPOR to a highly efficient light-driven LPOR. The key structural milestones achieved in N2ase, DPOR, and LPOR research laid the groundwork for future perspectives, particularly in proposing a direction for a potential nitrogen-fixing scenario using an AI-designed LUN and photosynthesis with bacteriochlorophyll using a light-driven chlide reductase (LCOR), leading to the development of more effective forms of biological nitrogen fixation and photosynthesis.
- Open Access
- 4 December 2025
- Published by Springer Nature in Communications Chemistry
- Vol. 9 (1)
Designing novel solenoid proteins with in silico evolution
Solenoid proteins are elongated tandem repeat proteins with diverse biological functions, making them attractive targets for protein design. Advances in machine learning have transformed our understanding of sequence-structure relationships, enabling new approaches for de novo protein design. Here, we present an in silico evolution platform that couples a solenoid discriminator network with AlphaFold2 as an oracle within a genetic algorithm. Starting from random sequences, we design α-, β-, and αβ-solenoid backbones, generating structures that span natural and novel solenoid space. We experimentally characterise 41 solenoid designs, with α-solenoids consistently folding as intended, including one structurally validated design that closely matches the design model. All β-solenoids initially failed, reflecting the difficulty of designing β-strand majority proteins. By introducing terminal capping elements and refining designs based on earlier experimental screens, we generate two β-solenoids that have biophysical properties consistent with their designs. Our approach achieves fold-specific hallucination-based design without depending on explicit structural templates.
- 4 December 2025
- Published by Springer Nature in Communications Chemistry
- Vol. 9 (1)
Open AccessDesigning novel solenoid proteins with in silico evolution
Solenoid proteins are elongated tandem repeat proteins with diverse biological functions, making them attractive targets for protein design. Advances in machine learning have transformed our understanding of sequence-structure relationships, enabling new approaches for de novo protein design. Here, we present an in silico evolution platform that couples a solenoid discriminator network with AlphaFold2 as an oracle within a genetic algorithm. Starting from random sequences, we design α-, β-, and αβ-solenoid backbones, generating structures that span natural and novel solenoid space. We experimentally characterise 41 solenoid designs, with α-solenoids consistently folding as intended, including one structurally validated design that closely matches the design model. All β-solenoids initially failed, reflecting the difficulty of designing β-strand majority proteins. By introducing terminal capping elements and refining designs based on earlier experimental screens, we generate two β-solenoids that have biophysical properties consistent with their designs. Our approach achieves fold-specific hallucination-based design without depending on explicit structural templates.
- Open Access
- 21 July 2025
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 41 (8)
SOLeNNoID: a deep learning pipeline for solenoid residue detection in protein structures
Motivation: Solenoid proteins, a subset of tandem repeat proteins, have structurally distinct, modular, and elongated architectures that differentiate them from globular proteins. These proteins play essential roles in diverse biological processes, including protein binding, enzymatic catalysis, ice binding, and nucleic acid interactions. Despite their biological significance and increasing commercial applications–such as in therapeutic engineered variants like DARPins and designed PPR proteins–accurate identification and annotation of solenoid structures remain challenging. Given that solenoid structures are more conserved than their sequences, recent advances in protein structure prediction suggest that structure-based solenoid detection methods are preferable to sequence-based ones. Results: We introduce SOLeNNoID, a deep-learning-based pipeline for predicting solenoid residues in protein structures. Our method employs a convolutional neural network architecture to analyse protein distance matrices, enabling accurate identification of solenoid-containing regions. SOLeNNoID covers all three solenoid subclasses: α-, α/β-, and β-solenoids. Comparative evaluation against existing structure-based methods demonstrates the superior performance of our approach. Applying SOLeNNoID to the entire Protein Data Bank led to a 71% increase in detected solenoid-containing entries compared to the gold-standard RepeatsDB database, significantly expanding the known solenoid protein repertoire. Availability and implementation: SOLeNNoID is implemented in Python and available on github at https://github.com/gnik2018/SOLeNNoID. The source code and pre-trained models are accessible under a free-software license. Training data are available on Zenodo at https://zenodo.org/records/14927497.
- 21 July 2025
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 41 (8)
Open AccessSOLeNNoID: a deep learning pipeline for solenoid residue detection in protein structures
Motivation: Solenoid proteins, a subset of tandem repeat proteins, have structurally distinct, modular, and elongated architectures that differentiate them from globular proteins. These proteins play essential roles in diverse biological processes, including protein binding, enzymatic catalysis, ice binding, and nucleic acid interactions. Despite their biological significance and increasing commercial applications–such as in therapeutic engineered variants like DARPins and designed PPR proteins–accurate identification and annotation of solenoid structures remain challenging. Given that solenoid structures are more conserved than their sequences, recent advances in protein structure prediction suggest that structure-based solenoid detection methods are preferable to sequence-based ones. Results: We introduce SOLeNNoID, a deep-learning-based pipeline for predicting solenoid residues in protein structures. Our method employs a convolutional neural network architecture to analyse protein distance matrices, enabling accurate identification of solenoid-containing regions. SOLeNNoID covers all three solenoid subclasses: α-, α/β-, and β-solenoids. Comparative evaluation against existing structure-based methods demonstrates the superior performance of our approach. Applying SOLeNNoID to the entire Protein Data Bank led to a 71% increase in detected solenoid-containing entries compared to the gold-standard RepeatsDB database, significantly expanding the known solenoid protein repertoire. Availability and implementation: SOLeNNoID is implemented in Python and available on github at https://github.com/gnik2018/SOLeNNoID. The source code and pre-trained models are accessible under a free-software license. Training data are available on Zenodo at https://zenodo.org/records/14927497.
- Open Access
- 10 June 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-11
Structure of a stripped-down and tuned-up far-red phycobilisome
A diverse subset of cyanobacteria can transiently modify their photosynthetic machinery during far-red light photoacclimation to drive photosynthesis with less energetic photons (700 nm–800 nm). To achieve this, all the main light-driven components of the photosynthetic apparatus, including their allophycocyanin antenna, are replaced with red-shifted paralogues. Recent studies based on the structure of an incomplete complex provided some insights into the tuning of the far-red phycobiliproteins. Here, we solved the structure of the intact bicylindrical allophycocyanin complex from the cyanobacterium Chroococcidiopsis thermalis PCC 7203 at a resolution of 2.51 Å determined by Cryo-electron microscopy single particle analysis. A comparison between conserved structural features in far-red and white light allophycocyanin cores provides insight on the evolutionary adaptations needed to optimize excitation energy transfer in the far-red light adapted photosynthetic apparatus. The reduction in antenna size in far-red photosynthesis suggests a need to optimize membrane packing to increase the number of photosystems and tune the ratio between chlorophyll f molecules and bilin pigments, while the wider spread in the absorption range of the bilins suggests faster and more efficient excitation energy transfer to far-red Photosystem II by limiting backflow of excitation from the reaction centres to the far-red bilin pigments.
- 10 June 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-11
Open AccessStructure of a stripped-down and tuned-up far-red phycobilisome
A diverse subset of cyanobacteria can transiently modify their photosynthetic machinery during far-red light photoacclimation to drive photosynthesis with less energetic photons (700 nm–800 nm). To achieve this, all the main light-driven components of the photosynthetic apparatus, including their allophycocyanin antenna, are replaced with red-shifted paralogues. Recent studies based on the structure of an incomplete complex provided some insights into the tuning of the far-red phycobiliproteins. Here, we solved the structure of the intact bicylindrical allophycocyanin complex from the cyanobacterium Chroococcidiopsis thermalis PCC 7203 at a resolution of 2.51 Å determined by Cryo-electron microscopy single particle analysis. A comparison between conserved structural features in far-red and white light allophycocyanin cores provides insight on the evolutionary adaptations needed to optimize excitation energy transfer in the far-red light adapted photosynthetic apparatus. The reduction in antenna size in far-red photosynthesis suggests a need to optimize membrane packing to increase the number of photosystems and tune the ratio between chlorophyll f molecules and bilin pigments, while the wider spread in the absorption range of the bilins suggests faster and more efficient excitation energy transfer to far-red Photosystem II by limiting backflow of excitation from the reaction centres to the far-red bilin pigments.