Minoru T. Miyahara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Minoru T. Miyahara has a total of 188 co-authors. Here are the top co-authors by number of shared publications:
- Hideki Tanaka
Research Initiative for Supra-Materials, Shinshu University, 4-17-1 Wakasato, Nagano 380-8553, Japan
15 shared publications - Satoshi Watanabe
Kyoto University Katsura, Nishikyo
10 shared publications - Shotaro Hiraide
Department of Chemical Engineering, Kyoto University, Nishikyo, Kyoto 615-8510, Japan
9 shared publications Satoshi Watanabe
6 shared publicationsTatsumasa Hiratsuka
Department of Chemical Engineering, Kyoto University , Katsura, Nishikyo, Kyoto 606-8501, Japan
4 shared publications- Tatsumasa Hiratsuka
Department of Chemical Engineering, Kyoto University, Katsura, Nishikyo, Kyoto 615-8510, Japan
4 shared publications
Latest Publications
- Open Access
- 28 January 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (4)
Solute interaction-driven and solvent interaction-driven liquid–liquid phase separation induced by molecular size difference
We conducted molecular dynamics (MD) simulations in a binary Lennard-Jones system as a model system for molecular solutions and investigated the mechanism of liquid–liquid phase separation (LLPS), which has recently been recognized as a fundamental step in crystallization and organelle formation. Our simulation results showed that LLPS behavior varied drastically with the size ratio of solute to solvent molecules. Interestingly, increasing the size ratio can either facilitate or inhibit LLPS, depending on the combination of interaction strengths. We demonstrated that the unique behavior observed in MD simulation could be reasonably explained by the free energy barrier height calculated using our thermodynamic model based on the classical nucleation theory. Our model proved that the molecular size determines the change in number of interaction pairs through LLPS. Varying the size ratio changes the net number of solute–solvent and solvent–solvent interaction pairs that are either broken or newly generated per solute–solute pair generation, thereby inducing a complicated trend in LLPS depending on the interaction parameters. As smaller molecules have more interaction pairs per unit volume, their contribution is more dominant in the promotion of LLPS. Consequently, as the size ratio of the solute to the solvent increased, the LLPS mode changed from solute-related interaction-driven to solvent-related interaction-driven.
- 28 January 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (4)
Open AccessSolute interaction-driven and solvent interaction-driven liquid–liquid phase separation induced by molecular size difference
We conducted molecular dynamics (MD) simulations in a binary Lennard-Jones system as a model system for molecular solutions and investigated the mechanism of liquid–liquid phase separation (LLPS), which has recently been recognized as a fundamental step in crystallization and organelle formation. Our simulation results showed that LLPS behavior varied drastically with the size ratio of solute to solvent molecules. Interestingly, increasing the size ratio can either facilitate or inhibit LLPS, depending on the combination of interaction strengths. We demonstrated that the unique behavior observed in MD simulation could be reasonably explained by the free energy barrier height calculated using our thermodynamic model based on the classical nucleation theory. Our model proved that the molecular size determines the change in number of interaction pairs through LLPS. Varying the size ratio changes the net number of solute–solvent and solvent–solvent interaction pairs that are either broken or newly generated per solute–solute pair generation, thereby inducing a complicated trend in LLPS depending on the interaction parameters. As smaller molecules have more interaction pairs per unit volume, their contribution is more dominant in the promotion of LLPS. Consequently, as the size ratio of the solute to the solvent increased, the LLPS mode changed from solute-related interaction-driven to solvent-related interaction-driven.
- Open Access
- 8 November 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-12
Generalised analytical method unravels framework-dependent kinetics of adsorption-induced structural transition in flexible metal–organic frameworks
Flexible metal–organic frameworks (MOFs) exhibiting adsorption-induced structural transition can revolutionise adsorption separation processes, including CO2 separation, which has become increasingly important in recent years. However, the kinetics of this structural transition remains poorly understood despite being crucial to process design. Here, the CO2-induced gate opening of ELM-11 ([Cu(BF4)2(4,4’-bipyridine)2]n) is investigated by time-resolved in situ X-ray powder diffraction, and a theoretical kinetic model of this process is developed to gain atomistic insight into the transition dynamics. The thus-developed model consists of the differential pressure from the gate opening (indicating the ease of structural transition) and reaction model terms (indicating the transition propagation within the crystal). The reaction model of ELM-11 is an autocatalytic reaction with two pathways for CO2 penetration of the framework. Moreover, gas adsorption analyses of two other flexible MOFs with different flexibilities indicate that the kinetics of the adsorption-induced structural transition is highly dependent on framework structure.
- 8 November 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-12
Open AccessGeneralised analytical method unravels framework-dependent kinetics of adsorption-induced structural transition in flexible metal–organic frameworks
Flexible metal–organic frameworks (MOFs) exhibiting adsorption-induced structural transition can revolutionise adsorption separation processes, including CO2 separation, which has become increasingly important in recent years. However, the kinetics of this structural transition remains poorly understood despite being crucial to process design. Here, the CO2-induced gate opening of ELM-11 ([Cu(BF4)2(4,4’-bipyridine)2]n) is investigated by time-resolved in situ X-ray powder diffraction, and a theoretical kinetic model of this process is developed to gain atomistic insight into the transition dynamics. The thus-developed model consists of the differential pressure from the gate opening (indicating the ease of structural transition) and reaction model terms (indicating the transition propagation within the crystal). The reaction model of ELM-11 is an autocatalytic reaction with two pathways for CO2 penetration of the framework. Moreover, gas adsorption analyses of two other flexible MOFs with different flexibilities indicate that the kinetics of the adsorption-induced structural transition is highly dependent on framework structure.
- 21 August 2023
- Published by Wiley in Angewandte Chemie
- Vol. 135 (39)
Crossover Sorption of C2H2/CO2 and C2H6/C2H4 in Soft Porous Coordination Networks
Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of “crossover sorption,” in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2(L1)(L2)2]n (PCP‐1) and [Zn2(L1)(L3)2]n (PCP‐2) (L1= 1,4‐bis(4‐pyridyl)benzene, L2=5‐methyl‐1,3‐di(4‐carboxyphenyl)benzene, and L3=5‐methoxy‐1,3‐di(4‐carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2H2/CO2 and C2H6/C2H4, in which the apparent affinity reverse with temperature. We used in situ gas‐loading single‐crystal X‐ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP‐1 for C2H2, CO2, C2H6, and C2H4 gases at various temperatures. Interestingly, we observed three‐step single‐crystal to single‐crystal (sc‐sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host–guest or guest‐guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host–guest and guest‐guest interactions.
- 21 August 2023
- Published by Wiley in Angewandte Chemie
- Vol. 135 (39)
Crossover Sorption of C2H2/CO2 and C2H6/C2H4 in Soft Porous Coordination Networks
Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of “crossover sorption,” in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2(L1)(L2)2]n (PCP‐1) and [Zn2(L1)(L3)2]n (PCP‐2) (L1= 1,4‐bis(4‐pyridyl)benzene, L2=5‐methyl‐1,3‐di(4‐carboxyphenyl)benzene, and L3=5‐methoxy‐1,3‐di(4‐carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2H2/CO2 and C2H6/C2H4, in which the apparent affinity reverse with temperature. We used in situ gas‐loading single‐crystal X‐ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP‐1 for C2H2, CO2, C2H6, and C2H4 gases at various temperatures. Interestingly, we observed three‐step single‐crystal to single‐crystal (sc‐sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host–guest or guest‐guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host–guest and guest‐guest interactions.
- 21 August 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (39) , e202308438
Crossover Sorption of C2H2/CO2 and C2H6/C2H4 in Soft Porous Coordination Networks
Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of “crossover sorption,” in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2(L1)(L2)2]n (PCP‐1) and [Zn2(L1)(L3)2]n (PCP‐2) (L1= 1,4‐bis(4‐pyridyl)benzene, L2=5‐methyl‐1,3‐di(4‐carboxyphenyl)benzene, and L3=5‐methoxy‐1,3‐di(4‐carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2H2/CO2 and C2H6/C2H4, in which the apparent affinity reverse with temperature. We used in situ gas‐loading single‐crystal X‐ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP‐1 for C2H2, CO2, C2H6, and C2H4 gases at various temperatures. Interestingly, we observed three‐step single‐crystal to single‐crystal (sc‐sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host–guest or guest‐guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host–guest and guest‐guest interactions.
- 21 August 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (39) , e202308438
Crossover Sorption of C2H2/CO2 and C2H6/C2H4 in Soft Porous Coordination Networks
Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of “crossover sorption,” in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2(L1)(L2)2]n (PCP‐1) and [Zn2(L1)(L3)2]n (PCP‐2) (L1= 1,4‐bis(4‐pyridyl)benzene, L2=5‐methyl‐1,3‐di(4‐carboxyphenyl)benzene, and L3=5‐methoxy‐1,3‐di(4‐carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2H2/CO2 and C2H6/C2H4, in which the apparent affinity reverse with temperature. We used in situ gas‐loading single‐crystal X‐ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP‐1 for C2H2, CO2, C2H6, and C2H4 gases at various temperatures. Interestingly, we observed three‐step single‐crystal to single‐crystal (sc‐sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host–guest or guest‐guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host–guest and guest‐guest interactions.
- 21 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (30) , 36975-36987
Validating the Mechanism Underlying the Slacking of the Gate-Opening Behavior in Flexible Metal–Organic Frameworks Arising from the Application of External Force
Flexible metal-organic frameworks (MOFs) are innovative adsorbents expected to revolutionize conventional separation systems as they exhibit stepwise adsorption arising from structural transitions, commonly known as "gate opening." However, because MOFs are typically obtained in powder form, they require shaping for industrial applications. In our previous study, we reported that the stepwise uptake observed in the CO2 gate opening of ELM-11 ([Cu(BF4)2(4,4'-bipyridine)2]) became less distinct when molded with polymer binders and found that this slacking phenomenon could be caused by the polymer binder inhibiting the structural change of the ELM-11 particles. In this study, we aimed to fully validate and generalize the mechanism behind the slacking of gate adsorption from both theoretical and experimental perspectives. First, we conducted grand canonical molecular dynamics simulations for a simplified MOF model to directly calculate free energy profiles of the particle to validate the slacking theory without any assumptions. The results confirmed the fundamental assumption made in our previous study that the deformation of the flexible motifs within the MOF particles occurs sequentially, which is a key factor contributing to the slacking phenomenon. The second part of the study focused on the relationship between the volume expansion ratio of MOFs and the degree of slacking. The relationship predicted by the theory was experimentally validated by comparing ELM-11, which exhibits 30% volume expansion, to another MOF with a mutually interpenetrating jungle-gym structure, which exhibits 10% volume expansion. These findings strengthened and generalized the understanding of the mechanism underlying the slacking of gate adsorption induced upon the application of external force, which could guide the fabrication of molded MOFs while maintaining a high adsorption efficiency for various industrial applications.
- 21 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (30) , 36975-36987
Validating the Mechanism Underlying the Slacking of the Gate-Opening Behavior in Flexible Metal–Organic Frameworks Arising from the Application of External Force
Flexible metal-organic frameworks (MOFs) are innovative adsorbents expected to revolutionize conventional separation systems as they exhibit stepwise adsorption arising from structural transitions, commonly known as "gate opening." However, because MOFs are typically obtained in powder form, they require shaping for industrial applications. In our previous study, we reported that the stepwise uptake observed in the CO2 gate opening of ELM-11 ([Cu(BF4)2(4,4'-bipyridine)2]) became less distinct when molded with polymer binders and found that this slacking phenomenon could be caused by the polymer binder inhibiting the structural change of the ELM-11 particles. In this study, we aimed to fully validate and generalize the mechanism behind the slacking of gate adsorption from both theoretical and experimental perspectives. First, we conducted grand canonical molecular dynamics simulations for a simplified MOF model to directly calculate free energy profiles of the particle to validate the slacking theory without any assumptions. The results confirmed the fundamental assumption made in our previous study that the deformation of the flexible motifs within the MOF particles occurs sequentially, which is a key factor contributing to the slacking phenomenon. The second part of the study focused on the relationship between the volume expansion ratio of MOFs and the degree of slacking. The relationship predicted by the theory was experimentally validated by comparing ELM-11, which exhibits 30% volume expansion, to another MOF with a mutually interpenetrating jungle-gym structure, which exhibits 10% volume expansion. These findings strengthened and generalized the understanding of the mechanism underlying the slacking of gate adsorption induced upon the application of external force, which could guide the fabrication of molded MOFs while maintaining a high adsorption efficiency for various industrial applications.
- 7 April 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (15) , 3524-3533
Mechanism of Nucleation Pathway Selection in Binary Lennard-Jones Solution: A Combined Study of Molecular Dynamics Simulation and Free Energy Analysis
The nucleation process, which is the initial step in particle synthesis, determines the properties of the resultant particles. Although recent studies have observed various nucleation pathways, the physical factors that determine these pathways have not been fully elucidated. Herein, we conducted molecular dynamics simulations in a binary Lennard-Jones system as a model solution and found that the nucleation pathway can be classified into four types depending on microscopic interactions. The key parameters are (1) the strength of the solute-solute interaction and (2) the difference between the strengths of the like-pair and unlike-pair interactions. The increment of the former alters the nucleation mechanism from a two-step to a one-step pathway, whereas that of the latter causes quick assembly of solutes. Moreover, we developed a thermodynamic model based on the formation of core-shell nuclei to calculate the free energy landscapes. Our model successfully described the pathway observed in the simulations and demonstrated that the two parameters, (1) and (2), define the degree of supercooling and supersaturation, respectively. Thus, our model interpreted the microscopic insights from a macroscopic point of view. Because the only inputs required for our model are the interaction parameters, our model can a priori predict the nucleation pathway.
- 7 April 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (15) , 3524-3533
Mechanism of Nucleation Pathway Selection in Binary Lennard-Jones Solution: A Combined Study of Molecular Dynamics Simulation and Free Energy Analysis
The nucleation process, which is the initial step in particle synthesis, determines the properties of the resultant particles. Although recent studies have observed various nucleation pathways, the physical factors that determine these pathways have not been fully elucidated. Herein, we conducted molecular dynamics simulations in a binary Lennard-Jones system as a model solution and found that the nucleation pathway can be classified into four types depending on microscopic interactions. The key parameters are (1) the strength of the solute-solute interaction and (2) the difference between the strengths of the like-pair and unlike-pair interactions. The increment of the former alters the nucleation mechanism from a two-step to a one-step pathway, whereas that of the latter causes quick assembly of solutes. Moreover, we developed a thermodynamic model based on the formation of core-shell nuclei to calculate the free energy landscapes. Our model successfully described the pathway observed in the simulations and demonstrated that the two parameters, (1) and (2), define the degree of supercooling and supersaturation, respectively. Thus, our model interpreted the microscopic insights from a macroscopic point of view. Because the only inputs required for our model are the interaction parameters, our model can a priori predict the nucleation pathway.
- 10 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (15) , 17878-17888
High-Performance Carbon Molecular Sieves for the Separation of Propylene and Propane
High-performance carbon molecular sieves (CMSs) for the separation of propylene (C3H6) and propane (C3H8) were synthesized in this study by chemical vapor deposition (CVD) of benzene on the pore entrances of activated carbon. The C3H6 and C3H8 separation characteristics of the CMSs were controlled by altering the amount of carbon deposited during CVD, and the resulting characteristic curve featuring the kinetic selectivity of C3H6 over C3H8 as a function of the adsorption rate constant of C3H6 is considered to be the upper bound of the C3H6–C3H8 separation factor for current CMSs because of the presence of previously reported CMS data under this curve. Additionally, CMS models were constructed using grand canonical molecular dynamics (GCMD) simulations mimicking the process of CVD, which revealed that the kinetic selectivity of C3H6 over C3H8 strongly depended on the size of the pore entrances at the level of 0.01 nm, and that strict control of the pore-entrance size was crucial for obtaining high-performance CMSs for C3H6–C3H8 separation. This was essentially achieved by controlling the duration of CVD, which led to the experimental realization of CMSs with a C3H6 selectivity over C3H8 of >2000 and a high uptake rate of C3H6. A design guideline for the development of high-performance CMSs for C3H6–C3H8 separation was proposed based on theoretical calculations performed using idealized carbon structures, which extracted the characteristics of the CMS models obtained from the GCMD simulations.
- 10 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (15) , 17878-17888
High-Performance Carbon Molecular Sieves for the Separation of Propylene and Propane
High-performance carbon molecular sieves (CMSs) for the separation of propylene (C3H6) and propane (C3H8) were synthesized in this study by chemical vapor deposition (CVD) of benzene on the pore entrances of activated carbon. The C3H6 and C3H8 separation characteristics of the CMSs were controlled by altering the amount of carbon deposited during CVD, and the resulting characteristic curve featuring the kinetic selectivity of C3H6 over C3H8 as a function of the adsorption rate constant of C3H6 is considered to be the upper bound of the C3H6–C3H8 separation factor for current CMSs because of the presence of previously reported CMS data under this curve. Additionally, CMS models were constructed using grand canonical molecular dynamics (GCMD) simulations mimicking the process of CVD, which revealed that the kinetic selectivity of C3H6 over C3H8 strongly depended on the size of the pore entrances at the level of 0.01 nm, and that strict control of the pore-entrance size was crucial for obtaining high-performance CMSs for C3H6–C3H8 separation. This was essentially achieved by controlling the duration of CVD, which led to the experimental realization of CMSs with a C3H6 selectivity over C3H8 of >2000 and a high uptake rate of C3H6. A design guideline for the development of high-performance CMSs for C3H6–C3H8 separation was proposed based on theoretical calculations performed using idealized carbon structures, which extracted the characteristics of the CMS models obtained from the GCMD simulations.
- 18 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (25) , 30213-30223
Slacking of Gate Adsorption Behavior on Metal–Organic Frameworks under an External Force
As flexible metal–organic frameworks (MOFs) and their gate adsorption behaviors are increasingly expected to be used in gas storage and separation systems, evaluating their performance by considering their usage patterns in actual processes is becoming increasingly important. Herein, we show that the shaping of the elastic layer-structured MOF-11 (ELM-11; [Cu(BF4)2(4,4′-bipyridine)2]) into pellet forms using polymer binders smears its stepwise uptake associated with the CO2 gate adsorption. This is a critical problem because the superior adsorption properties of flexible MOFs are highly dependent on the sharpness of the step. Free energy analysis by molecular simulations revealed that the slacking of the gate adsorption is natural from a thermodynamic point of view. In other words, the external force exerted by the polymer binders, which prevents the expansion of MOF particles upon the gate opening, changes the free energy landscape of the system. This causes the flexible motifs within the MOF particles to undergo a structural transition at slightly different pressures from each other. The force profile dependence of the slacking phenomenon on both adsorption and desorption isotherms was also investigated. It was revealed that controlling the force profile applied to MOF particles is important to mold MOF pellets that satisfy the robustness and sharpness of the gate adsorption. Finally, we examined the coating of pellets to verify the relationship between the force profile and the degree of slacking and discussed possible strategies to improve the sharpness of the gate adsorption on MOF pellets considering the revealed mechanism.
- 18 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (25) , 30213-30223
Slacking of Gate Adsorption Behavior on Metal–Organic Frameworks under an External Force
As flexible metal–organic frameworks (MOFs) and their gate adsorption behaviors are increasingly expected to be used in gas storage and separation systems, evaluating their performance by considering their usage patterns in actual processes is becoming increasingly important. Herein, we show that the shaping of the elastic layer-structured MOF-11 (ELM-11; [Cu(BF4)2(4,4′-bipyridine)2]) into pellet forms using polymer binders smears its stepwise uptake associated with the CO2 gate adsorption. This is a critical problem because the superior adsorption properties of flexible MOFs are highly dependent on the sharpness of the step. Free energy analysis by molecular simulations revealed that the slacking of the gate adsorption is natural from a thermodynamic point of view. In other words, the external force exerted by the polymer binders, which prevents the expansion of MOF particles upon the gate opening, changes the free energy landscape of the system. This causes the flexible motifs within the MOF particles to undergo a structural transition at slightly different pressures from each other. The force profile dependence of the slacking phenomenon on both adsorption and desorption isotherms was also investigated. It was revealed that controlling the force profile applied to MOF particles is important to mold MOF pellets that satisfy the robustness and sharpness of the gate adsorption. Finally, we examined the coating of pellets to verify the relationship between the force profile and the degree of slacking and discussed possible strategies to improve the sharpness of the gate adsorption on MOF pellets considering the revealed mechanism.
- 24 February 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (13) , 3858-3867
Flow Microreactor Synthesis of Zeolitic Imidazolate Framework (ZIF)@ZIF Core–Shell Metal–Organic Framework Particles and Their Adsorption Properties
Metal–organic frameworks (MOFs) with core–shell structures enable to enhance intrinsic properties of constituent MOFs and impart additional functional activities. Although shell thickness is a key factor for regulating the properties of core–shell MOF particles, controlling it has been challenging. The widely used batch reactor synthesis cannot produce core–shell particles with uniform shell thickness because of poor reactant mixing. A microreactor could ensure excellent mixing, and that would allow to control shell thickness. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8)@ZIF-67 and [email protected] core–shell particles using a microreactor and investigated the effects of the mixing performance on the shell thickness of the obtained particles. Our results demonstrated that rapid mixing was critical for the uniformity of the synthesized particles. The concentration of core particles is another key factor that can preferentially induce heterogeneous nucleation on the surface of the core particles without inducing self-nucleation in the bulk solution, particularly when the self-nucleation rate of the shell MOF is high. The N2 adsorption isotherms of the synthesized particles revealed their unique adsorption properties, which were ascribed to the core–shell structures obtained at low shell formation rates. Our simple and versatile synthesis technique not only allowed the preparation of [email protected] particles with novel functionalities but also can be extended to synthesize core–shell MOF particles with different combinations of core particles and shells.
- 24 February 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (13) , 3858-3867
Flow Microreactor Synthesis of Zeolitic Imidazolate Framework (ZIF)@ZIF Core–Shell Metal–Organic Framework Particles and Their Adsorption Properties
Metal–organic frameworks (MOFs) with core–shell structures enable to enhance intrinsic properties of constituent MOFs and impart additional functional activities. Although shell thickness is a key factor for regulating the properties of core–shell MOF particles, controlling it has been challenging. The widely used batch reactor synthesis cannot produce core–shell particles with uniform shell thickness because of poor reactant mixing. A microreactor could ensure excellent mixing, and that would allow to control shell thickness. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8)@ZIF-67 and [email protected] core–shell particles using a microreactor and investigated the effects of the mixing performance on the shell thickness of the obtained particles. Our results demonstrated that rapid mixing was critical for the uniformity of the synthesized particles. The concentration of core particles is another key factor that can preferentially induce heterogeneous nucleation on the surface of the core particles without inducing self-nucleation in the bulk solution, particularly when the self-nucleation rate of the shell MOF is high. The N2 adsorption isotherms of the synthesized particles revealed their unique adsorption properties, which were ascribed to the core–shell structures obtained at low shell formation rates. Our simple and versatile synthesis technique not only allowed the preparation of [email protected] particles with novel functionalities but also can be extended to synthesize core–shell MOF particles with different combinations of core particles and shells.
- 19 July 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (32) , 14485-14495
Efficiency of Thermal Management Using Phase-Change Material for Nonisothermal Adsorption Process
- 19 July 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (32) , 14485-14495
Efficiency of Thermal Management Using Phase-Change Material for Nonisothermal Adsorption Process