Vignesh Sundaresan
Vignesh Sundaresan has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Katherine A. Willets
Department of Chemistry
8 shared publications - Paul W. Bohn
University of Notre Dame
6 shared publications - Joseph W. Monaghan
Department of Chemistry, Temple University, Philadelphia, Pennsylvania19122, United States
3 shared publications - Yun Yu
George Mason University
3 shared publications - Andrew J. Wilson
University of Louisville
2 shared publications - Joshua D. Shrout
Department of Civil and Environmental Engineering and Earth Sciences, University of Notre Dame
2 shared publications
Latest Publications
- 12 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (16) , 11630-11634
Dynamic Interfacial Processes in Single Hydrogen Microbubbles Probed by Operando Opto-Electrochemistry
Understanding how individual gas bubbles nucleate, grow, and interact with electrode surfaces is critical for improving the efficiency of gas-evolving electrochemical reactions. Here, we combine pseudo-dark-field optical microscopy with electrochemical measurements to visualize the growth and dynamics of single H2 microbubbles during the H2 evolution reaction at a 10 μm diameter Pt ultra-microelectrode. The electrochemical response exhibits a rapid rise in current during H2 evolution, followed by an abrupt decrease to a residual value upon bubble formation and electrode blocking, consistent with single-bubble nucleation behavior. From the peak current, a critical nucleus diameter of ∼0.3 μm, a critical dissolved H2 concentration of 0.007 M, and an internal pressure of ∼9.6 atm are determined. Simultaneous optical measurements reveal a sharp increase in scattering intensity during bubble growth. Notably, the bubble expands to ∼54 μm without inducing current shutdown and subsequently relaxes to ∼44 μm while undergoing an abrupt ∼10 μm lateral displacement within 200 ms, coincident with faradaic current shutdown. We propose that this motion arises from asymmetric Marangoni convection driven by surface-tension gradients generated by local variations in dissolved H2 concentration and temperature. Together, these results highlight the importance of interfacial hydrodynamics in governing bubble behavior at three-phase boundaries.
- 12 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (16) , 11630-11634
Dynamic Interfacial Processes in Single Hydrogen Microbubbles Probed by Operando Opto-Electrochemistry
Understanding how individual gas bubbles nucleate, grow, and interact with electrode surfaces is critical for improving the efficiency of gas-evolving electrochemical reactions. Here, we combine pseudo-dark-field optical microscopy with electrochemical measurements to visualize the growth and dynamics of single H2 microbubbles during the H2 evolution reaction at a 10 μm diameter Pt ultra-microelectrode. The electrochemical response exhibits a rapid rise in current during H2 evolution, followed by an abrupt decrease to a residual value upon bubble formation and electrode blocking, consistent with single-bubble nucleation behavior. From the peak current, a critical nucleus diameter of ∼0.3 μm, a critical dissolved H2 concentration of 0.007 M, and an internal pressure of ∼9.6 atm are determined. Simultaneous optical measurements reveal a sharp increase in scattering intensity during bubble growth. Notably, the bubble expands to ∼54 μm without inducing current shutdown and subsequently relaxes to ∼44 μm while undergoing an abrupt ∼10 μm lateral displacement within 200 ms, coincident with faradaic current shutdown. We propose that this motion arises from asymmetric Marangoni convection driven by surface-tension gradients generated by local variations in dissolved H2 concentration and temperature. Together, these results highlight the importance of interfacial hydrodynamics in governing bubble behavior at three-phase boundaries.
- 11 June 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (26) , 13747-13751
Electrochemical Calcite-Assisted Localization and Kinetics (E-CLocK) Microscopy
Nanoparticle (NP) morphology is a critical factor influencing the efficiency and selectivity of electrochemical reactions. However, conventional electrochemical techniques do not provide information about the dynamic morphological changes of NPs during these reactions. Advanced methods such as atomic force microscopy (AFM) and transmission electron microscopy (TEM) offer higher resolution but are costly and may impact electrochemical measurements. Here, we introduce dark-field-based electrochemical calcite-assisted localization and kinetics (E-CLocK) microscopy, a novel multiparameter super-resolution imaging technique enabling real-time, non-invasive tracking of qualitative and quantitative morphological changes at the single-nanoparticle level during electrochemical processes. In E-CLocK microscopy, a rotating calcite crystal is integrated into the infinity space of a dark-field microscope, generating a distinctive point spread function that can be analyzed to determine the anisotropy and orientation of NPs. Using gold NP electrodeposition as a model reaction, we quantitatively assessed the morphological anisotropy of the individual NPs during their growth. Nearly all particles exhibited steady isotropic growth with only the gold precursor solution; however, the addition of cetyltrimethylammonium bromide (CTAB), a surfactant, induced oscillatory behavior and significantly promoted the growth of anisotropic NPs. E-CLocK microscopy provides a high-throughput and reliable method for tracking morphological changes during electrochemical reactions, significantly advancing single-particle structure–activity studies.
- 11 June 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (26) , 13747-13751
Electrochemical Calcite-Assisted Localization and Kinetics (E-CLocK) Microscopy
Nanoparticle (NP) morphology is a critical factor influencing the efficiency and selectivity of electrochemical reactions. However, conventional electrochemical techniques do not provide information about the dynamic morphological changes of NPs during these reactions. Advanced methods such as atomic force microscopy (AFM) and transmission electron microscopy (TEM) offer higher resolution but are costly and may impact electrochemical measurements. Here, we introduce dark-field-based electrochemical calcite-assisted localization and kinetics (E-CLocK) microscopy, a novel multiparameter super-resolution imaging technique enabling real-time, non-invasive tracking of qualitative and quantitative morphological changes at the single-nanoparticle level during electrochemical processes. In E-CLocK microscopy, a rotating calcite crystal is integrated into the infinity space of a dark-field microscope, generating a distinctive point spread function that can be analyzed to determine the anisotropy and orientation of NPs. Using gold NP electrodeposition as a model reaction, we quantitatively assessed the morphological anisotropy of the individual NPs during their growth. Nearly all particles exhibited steady isotropic growth with only the gold precursor solution; however, the addition of cetyltrimethylammonium bromide (CTAB), a surfactant, induced oscillatory behavior and significantly promoted the growth of anisotropic NPs. E-CLocK microscopy provides a high-throughput and reliable method for tracking morphological changes during electrochemical reactions, significantly advancing single-particle structure–activity studies.
- Open Access
- 30 August 2024
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 8
Electrochemical detection of heavy metal ions adsorbed on microplastics with varying surface charges
- 30 August 2024
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 8
Open AccessElectrochemical detection of heavy metal ions adsorbed on microplastics with varying surface charges
- 24 August 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (35) , 12993-12997
Nanopore-Enabled Dark-Field Digital Sensing of Nanoparticles
In this study, we use nanopore arrays as a platform for detecting and characterizing individual nanoparticles (NPs) in real time. Dark-field imaging of nanopores with dimensions smaller than the wavelength of light occurs under conditions where trans-illumination is blocked, while the scattered light propagates to the far-field, making it possible to identify nanopores. The intensity of scattering increases dramatically during insertion of AgNPs into empty nanopores, owing to their plasmonic properties. Thus, momentary occupation of a nanopore by a AgNP produces intensity transients that can be analyzed to reveal the following characteristics: (1) NP scattering intensity, which scales with the sixth power of the AgNP radius, shows a normal distribution arising from the heterogeneity in NP size, (2) the nanopore residence time of NPs, which was observed to be stochastic with no permselective effects, and (3) the frequency of AgNP capture events on a 21 × 21 nanopore array, which varies linearly with the concentration of the NPs, agreeing with the frequency calculated from theory. The lower limit of detection (LOD) for NPs was 130 fM, indicating that the measurement can be used in applications in which ultrasensitive detection is required. The results presented here provide valuable insights into the dynamics of NP transport into and out of nanopores and highlight the potential of nanopore arrays as powerful, massively parallel tools for nanoparticle characterization and detection.
- 24 August 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (35) , 12993-12997
Nanopore-Enabled Dark-Field Digital Sensing of Nanoparticles
In this study, we use nanopore arrays as a platform for detecting and characterizing individual nanoparticles (NPs) in real time. Dark-field imaging of nanopores with dimensions smaller than the wavelength of light occurs under conditions where trans-illumination is blocked, while the scattered light propagates to the far-field, making it possible to identify nanopores. The intensity of scattering increases dramatically during insertion of AgNPs into empty nanopores, owing to their plasmonic properties. Thus, momentary occupation of a nanopore by a AgNP produces intensity transients that can be analyzed to reveal the following characteristics: (1) NP scattering intensity, which scales with the sixth power of the AgNP radius, shows a normal distribution arising from the heterogeneity in NP size, (2) the nanopore residence time of NPs, which was observed to be stochastic with no permselective effects, and (3) the frequency of AgNP capture events on a 21 × 21 nanopore array, which varies linearly with the concentration of the NPs, agreeing with the frequency calculated from theory. The lower limit of detection (LOD) for NPs was 130 fM, indicating that the measurement can be used in applications in which ultrasensitive detection is required. The results presented here provide valuable insights into the dynamics of NP transport into and out of nanopores and highlight the potential of nanopore arrays as powerful, massively parallel tools for nanoparticle characterization and detection.
- 7 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 13 (45) , 10527-10533
Calcite-Assisted Localization and Kinetics (CLocK) Microscopy
Localization-based super-resolution imaging techniques have improved the spatial resolution of optical microscopy well below the diffraction limit, yet encoding additional information into super-resolved images, such as anisotropy and orientation, remains a challenge. Here we introduce calcite-assisted localization and kinetics (CLocK) microscopy, a multiparameter super-resolution imaging technique easily integrated into any existing optical microscope setup at low cost and with straightforward analysis. By placing a rotating calcite crystal in the infinity space of an optical microscope, CLocK microscopy provides immediate polarization and orientation information while maintaining the ability to localize an emitter/scatterer with <10 nm resolution. Further, kinetic information an order of magnitude shorter than the integration time of the camera is encoded in the unique point spread function of a CLocK image, allowing for new mechanistic insight into dynamic processes such as single-nanoparticle dissolution and single-molecule surface-enhanced Raman scattering.
- 7 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 13 (45) , 10527-10533
Calcite-Assisted Localization and Kinetics (CLocK) Microscopy
Localization-based super-resolution imaging techniques have improved the spatial resolution of optical microscopy well below the diffraction limit, yet encoding additional information into super-resolved images, such as anisotropy and orientation, remains a challenge. Here we introduce calcite-assisted localization and kinetics (CLocK) microscopy, a multiparameter super-resolution imaging technique easily integrated into any existing optical microscope setup at low cost and with straightforward analysis. By placing a rotating calcite crystal in the infinity space of an optical microscope, CLocK microscopy provides immediate polarization and orientation information while maintaining the ability to localize an emitter/scatterer with <10 nm resolution. Further, kinetic information an order of magnitude shorter than the integration time of the camera is encoded in the unique point spread function of a CLocK image, allowing for new mechanistic insight into dynamic processes such as single-nanoparticle dissolution and single-molecule surface-enhanced Raman scattering.
- 25 February 2022
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 94 (9) , 3970-3977
Electrochemical Zero-Mode Waveguide Potential-Dependent Fluorescence of Glutathione Reductase at Single-Molecule Occupancy
Understanding functional states of individual redox enzymes is important because electron-transfer reactions are fundamental to life, and single-enzyme molecules exhibit molecule-to-molecule heterogeneity in their properties, such as catalytic activity. Zero-mode waveguides (ZMW) constitute a powerful tool for single-molecule studies, enabling investigations of binding reactions up to the micromolar range due to the ability to trap electromagnetic radiation in zeptoliter-scale observation volumes. Here, we report the potential-dependent fluorescence dynamics of single glutathione reductase (GR) molecules using a bimodal electrochemical ZMW (E-ZMW), where a single-ring electrode embedded in each of the nanopores of an E-ZMW array simultaneously serves to control electrochemical potential and to confine optical radiation within the nanopores. Here, the redox state of GR is manipulated using an external potential control of the Au electrode in the presence of a redox mediator, methyl viologen (MV). Redox-state transitions in GR are monitored by correlating electrochemical and spectroscopic signals from freely diffusing MV/GR in 60 zL effective observation volumes at single GR molecule average pore occupancy, ⟨n⟩ ∼ 0.8. Fluorescence intensities decrease (increase) at reducing (oxidizing) potentials for MV due to the MV-mediated control of the GR redox state. The spectroelectrochemical response of GR to the enzyme substrate, i.e., glutathione disulfide (GSSG), shows that GSSG promotes GR oxidation via enzymatic reduction. The capabilities of E-ZMWs to probe spectroelectrochemical phenomena in zL-scale-confined environments show great promise for the study of single-enzyme reactions and can be extended to important technological applications, such as those in molecular diagnostics.
- 25 February 2022
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 94 (9) , 3970-3977
Electrochemical Zero-Mode Waveguide Potential-Dependent Fluorescence of Glutathione Reductase at Single-Molecule Occupancy
Understanding functional states of individual redox enzymes is important because electron-transfer reactions are fundamental to life, and single-enzyme molecules exhibit molecule-to-molecule heterogeneity in their properties, such as catalytic activity. Zero-mode waveguides (ZMW) constitute a powerful tool for single-molecule studies, enabling investigations of binding reactions up to the micromolar range due to the ability to trap electromagnetic radiation in zeptoliter-scale observation volumes. Here, we report the potential-dependent fluorescence dynamics of single glutathione reductase (GR) molecules using a bimodal electrochemical ZMW (E-ZMW), where a single-ring electrode embedded in each of the nanopores of an E-ZMW array simultaneously serves to control electrochemical potential and to confine optical radiation within the nanopores. Here, the redox state of GR is manipulated using an external potential control of the Au electrode in the presence of a redox mediator, methyl viologen (MV). Redox-state transitions in GR are monitored by correlating electrochemical and spectroscopic signals from freely diffusing MV/GR in 60 zL effective observation volumes at single GR molecule average pore occupancy, ⟨n⟩ ∼ 0.8. Fluorescence intensities decrease (increase) at reducing (oxidizing) potentials for MV due to the MV-mediated control of the GR redox state. The spectroelectrochemical response of GR to the enzyme substrate, i.e., glutathione disulfide (GSSG), shows that GSSG promotes GR oxidation via enzymatic reduction. The capabilities of E-ZMWs to probe spectroelectrochemical phenomena in zL-scale-confined environments show great promise for the study of single-enzyme reactions and can be extended to important technological applications, such as those in molecular diagnostics.
- 20 December 2021
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 147 (1) , 22-34
Electrochemical and spectroelectrochemical characterization of bacteria and bacterial systems
Microbes, such as bacteria, can be described, at one level, as small, self-sustaining chemical factories. Based on the species, strain, and even the environment, bacteria can be useful, neutral or pathogenic to human life, so it is increasingly important that we be able to characterize them at the molecular level with chemical specificity and spatial and temporal resolution in order to understand their behavior. Bacterial metabolism involves a large number of internal and external electron transfer processes, so it is logical that electrochemical techniques have been employed to investigate these bacterial metabolites. In this mini-review, we focus on electrochemical and spectroelectrochemical methods that have been developed and used specifically to chemically characterize bacteria and their behavior. First, we discuss the latest mechanistic insights and current understanding of microbial electron transfer, including both direct and mediated electron transfer. Second, we summarize progress on approaches to spatiotemporal characterization of secreted factors, including both metabolites and signaling molecules, which can be used to discern how natural or external factors can alter metabolic states of bacterial cells and change either their individual or collective behavior. Finally, we address in situ methods of single-cell characterization, which can uncover how heterogeneity in cell behavior is reflected in the behavior and properties of collections of bacteria, e.g. bacterial communities. Recent advances in (spectro)electrochemical characterization of bacteria have yielded important new insights both at the ensemble and the single-entity levels, which are furthering our understanding of bacterial behavior. These insights, in turn, promise to benefit applications ranging from biosensors to the use of bacteria in bacteria-based bioenergy generation and storage.
- 20 December 2021
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 147 (1) , 22-34
Electrochemical and spectroelectrochemical characterization of bacteria and bacterial systems
Microbes, such as bacteria, can be described, at one level, as small, self-sustaining chemical factories. Based on the species, strain, and even the environment, bacteria can be useful, neutral or pathogenic to human life, so it is increasingly important that we be able to characterize them at the molecular level with chemical specificity and spatial and temporal resolution in order to understand their behavior. Bacterial metabolism involves a large number of internal and external electron transfer processes, so it is logical that electrochemical techniques have been employed to investigate these bacterial metabolites. In this mini-review, we focus on electrochemical and spectroelectrochemical methods that have been developed and used specifically to chemically characterize bacteria and their behavior. First, we discuss the latest mechanistic insights and current understanding of microbial electron transfer, including both direct and mediated electron transfer. Second, we summarize progress on approaches to spatiotemporal characterization of secreted factors, including both metabolites and signaling molecules, which can be used to discern how natural or external factors can alter metabolic states of bacterial cells and change either their individual or collective behavior. Finally, we address in situ methods of single-cell characterization, which can uncover how heterogeneity in cell behavior is reflected in the behavior and properties of collections of bacteria, e.g. bacterial communities. Recent advances in (spectro)electrochemical characterization of bacteria have yielded important new insights both at the ensemble and the single-entity levels, which are furthering our understanding of bacterial behavior. These insights, in turn, promise to benefit applications ranging from biosensors to the use of bacteria in bacteria-based bioenergy generation and storage.
- Open Access
Real-time Image Denoising of Mixed Poisson-Gaussian Noise in Fluorescence Microscopy Images using ImageJ
A bstract: Fluorescence microscopy imaging speed is fundamentally limited by the measurement signal-to-noise ratio (SNR). To improve image SNR for a given image acquisition rate, computational denoising techniques can be used to suppress noise. However, common techniques to estimate a denoised image from a single frame are either computationally expensive or rely on simple noise statistical models. These models assume Poisson or Gaussian noise statistics, which are not appropriate for many fluorescence microscopy applications that contain quantum shot noise and electronic Johnson–Nyquist noise, therefore a mixture of Poisson and Gaussian noise. In this paper, we show convolutional neural networks (CNNs) trained on mixed Poisson and Gaussian noise images to overcome the limitations of existing image denoising methods. The trained CNN is presented as an open-source ImageJ plugin that performs real-time image denoising (within tens of milliseconds) with superior performance (SNR improvement) compared to the conventional fluorescence microscopy denoising methods. The method is validated on external datasets with out-of-distribution noise, contrast, structure, and imaging modalities from the training data and consistently achieves high performance (> 8 dB) denoising in less time than other fluorescence microscopy denoising methods.
Open AccessReal-time Image Denoising of Mixed Poisson-Gaussian Noise in Fluorescence Microscopy Images using ImageJ
A bstract: Fluorescence microscopy imaging speed is fundamentally limited by the measurement signal-to-noise ratio (SNR). To improve image SNR for a given image acquisition rate, computational denoising techniques can be used to suppress noise. However, common techniques to estimate a denoised image from a single frame are either computationally expensive or rely on simple noise statistical models. These models assume Poisson or Gaussian noise statistics, which are not appropriate for many fluorescence microscopy applications that contain quantum shot noise and electronic Johnson–Nyquist noise, therefore a mixture of Poisson and Gaussian noise. In this paper, we show convolutional neural networks (CNNs) trained on mixed Poisson and Gaussian noise images to overcome the limitations of existing image denoising methods. The trained CNN is presented as an open-source ImageJ plugin that performs real-time image denoising (within tens of milliseconds) with superior performance (SNR improvement) compared to the conventional fluorescence microscopy denoising methods. The method is validated on external datasets with out-of-distribution noise, contrast, structure, and imaging modalities from the training data and consistently achieves high performance (> 8 dB) denoising in less time than other fluorescence microscopy denoising methods.
- 18 October 2021
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 93 (43) , 14481-14488
Actively Controllable Solid-Phase Microextraction in a Hierarchically Organized Block Copolymer-Nanopore Electrode Array Sensor for Charge-Selective Detection of Bacterial Metabolites
Pseudomonas aeruginosa produces a number of phenazine metabolites, including pyocyanin (PYO), phenazine-1-carboxamide (PCN), and phenazine-1-carboxylic acid (PCA). Among these, PYO has been most widely studied as a biomarker of P. aeruginosa infection. However, despite its broad-spectrum antibiotic properties and its role as a precursor in the biosynthetic route leading to other secondary phenazines, PCA has attracted less attention, partially due to its relatively low concentration and interference from other highly abundant phenazines. This challenge is addressed here by constructing a hierarchically organized nanostructure consisting of a pH-responsive block copolymer (BCP) membrane with nanopore electrode arrays (NEAs) filled with gold nanoparticles (AuNPs) to separate and detect PCA in bacterial environments. The BCP[email protected] strategy is designed such that adjusting the pH of the bacterial medium to 4.5, which is above the pKa of PCA but below the pKa of PYO and PCN, ensures that PCA is negatively charged and can be selectively transported across the BCP membrane. At pH 4.5, only PCA is transported into the AuNP-filled NEAs, while PYO and PCN are blocked. Structural characterization illustrates the rigorous spatial segregation of the AuNPs in the NEA nanopore volume, allowing PCA secreted from P. aeruginosa to be quantitatively determined as a function of incubation time using square-wave voltammetry and surface-enhanced Raman spectroscopy. The strategy proposed in this study can be extended by changing the nature of the hydrophilic block and subsequently applied to detect other redox-active metabolites at a low concentration in complex biological samples and, thus, help understand metabolism in microbial communities.
- 18 October 2021
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 93 (43) , 14481-14488
Actively Controllable Solid-Phase Microextraction in a Hierarchically Organized Block Copolymer-Nanopore Electrode Array Sensor for Charge-Selective Detection of Bacterial Metabolites
Pseudomonas aeruginosa produces a number of phenazine metabolites, including pyocyanin (PYO), phenazine-1-carboxamide (PCN), and phenazine-1-carboxylic acid (PCA). Among these, PYO has been most widely studied as a biomarker of P. aeruginosa infection. However, despite its broad-spectrum antibiotic properties and its role as a precursor in the biosynthetic route leading to other secondary phenazines, PCA has attracted less attention, partially due to its relatively low concentration and interference from other highly abundant phenazines. This challenge is addressed here by constructing a hierarchically organized nanostructure consisting of a pH-responsive block copolymer (BCP) membrane with nanopore electrode arrays (NEAs) filled with gold nanoparticles (AuNPs) to separate and detect PCA in bacterial environments. The BCP[email protected] strategy is designed such that adjusting the pH of the bacterial medium to 4.5, which is above the pKa of PCA but below the pKa of PYO and PCN, ensures that PCA is negatively charged and can be selectively transported across the BCP membrane. At pH 4.5, only PCA is transported into the AuNP-filled NEAs, while PYO and PCN are blocked. Structural characterization illustrates the rigorous spatial segregation of the AuNPs in the NEA nanopore volume, allowing PCA secreted from P. aeruginosa to be quantitatively determined as a function of incubation time using square-wave voltammetry and surface-enhanced Raman spectroscopy. The strategy proposed in this study can be extended by changing the nature of the hydrophilic block and subsequently applied to detect other redox-active metabolites at a low concentration in complex biological samples and, thus, help understand metabolism in microbial communities.