BFBjørn-Ove Fimland

Bjørn-Ove Fimland

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bjørn-Ove Fimland has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Surface-Emitting UV Nanowire Photonic Crystal Lasers: A Simulation-Driven Approach

    by Dishiti Gupta, Tron Arne Nilsen, Astrid Aksnes, Bjørn-Ove Fimland, Helge Weman

    There is a large lag in the development of efficient surface-emitting ultraviolet (UV) lasers compared to visible and infrared lasers. Most efforts have been directed towards incremental improvements in fabrication techniques. In this work, a systematic simulation-driven approach is proposed to optimize GaN/AlGaN nanowire (NW)-based photonic crystal (PhC) laser structures, which have potential applications in disinfection, sensing and non-line-of-sight communications. The method employs 1-dimensional and 2-dimensional solvers to pre-screen leaky designs and refine the structural parameters, which are then further analyzed using 3-dimensional simulations for the final optimization. A new physical analysis of the PhC mode and its diffracted components is proposed. This analysis provides insight into the interplay between PhC, NW, and air modes and its effect on the performance of NW PhC lasers. A simplified approach to the complex multi-parameter optimization problem for NW waveguide structures is developed that not only improves the performance of UV lasers but also establishes general design principles for surface-emitting NW-based PhC lasers. These guidelines are primarily concerned with ensuring that structures accommodate the PhC mode well, which depend on the layer thicknesses of the NW waveguide. Implementing these guidelines can result in more than a 60-fold improvement in the NW PhC laser performance. It is further suggested to optimize for surface output efficiency rather than Q-factor and introduce absorption losses once a suitable structure has been found. This framework represents a robust and computationally efficient pathway for future development in optimizing the NW waveguide design, paving the way for cost-effective and high-performance UV light-emitting devices.


  • Open Access

    Enhancing the performance of Ga(In)NAs intermediate-band solar cells

    by Emil Mihai Pavelescu, Saroj Kumar Patra, Cosmin Romaniţan, Alina Matei, Øystein Dahl, Mohana K Rajpalke, Valentin Ionel Feieş, Andrei Drăgulinescu, Marian Vlădescu, Turid Reenaas, et al.

    Intermediate band solar cells (IBSCs) have the potential to overcome the efficiency limit of single-bandgap solar cells. Dilute nitride III–V alloys, with splitting of the conduction band due to band anticrossing, can be used as the intermediate-band material for solar cell applications. In this work, we report on the introduction of engineered GaInNAs alloy, with low (dilute) In and N contents, as IBSC material and the comparison of the performances of GaInNAs-based and the corresponding In-free GaNAs-based IBSCs grown on GaAs (100) substrate. Introduction of a small amount of In (3%) in a GaN0.011As0.989-based IBSC was found to noticeably increase the short-circuit current, I sc, at the expense of a small decrease in the open-circuit voltage, V oc. When annealed at 750 °C for 90 s, significant enhancements in I sc and V oc are seen, especially in the In-containing solar cell. The observed In-related enhancement in cell parameters after annealing is related to In-promoted bandgap tailoring and efficient curing of carrier traps during annealing. This occurred without change in the macroscopic composition of the GaInNAs alloy, most likely by In-N bond formation upon annealing, a phenomenon which does not exist in the GaNAs alloy.

  • Widely Tunable Coupled Mid-IR Diode Lasers With Side Mode Suppression Ratio Above 40 dB

    by Thanh-Nam Tran, Saroj Kumar Patra, Magnus Breivik, Bjørn-Ove Fimland

    A novel tunable coupled lasers structure utilizing the Vernier effect and the light coupling mechanism is successfully demonstrated in the wavelength range of 2.35 – $2.39~\mu $ m. The coupling effect between two active S-bend and straight waveguide lasers can enable both a wide tuning range and a very high side mode suppression ratio (SMSR) by choosing an appropriate separation gap between these two lasers. With a separation gap of $5~\mu $ m, a wide tuning range of 40 nm and a stable SMSR of above 40 dB was achieved. Employing a simple structure, this regrowth-free and easily manufactured laser configuration is a highly promising solution for trace-gas sensing applications.

  • Open Access

    Quasi van der Waals Epitaxial Growth of GaAsSb Nanowires on Graphitic Substrate for Photonic Applications

    by Dingding Ren, Tron A. Nilsen, Julie S. Nilsen, Lyubomir Ahtapodov, Anjan Mukherjee, Yang Li, Antonius T. J. van Helvoort, Helge Weman, Bjørn-Ove Fimland


  • Open Access

    Quasi van der Waals Epitaxial Growth of GaAsSb Nanowires on Graphitic Substrate for Photonic Applications

    by Dingding Ren, Tron A. Nilsen, Julie S. Nilsen, Lyubomir Ahtapodov, Anjan Mukherjee, Yang Li, Antonius T. J. van Helvoort, Helge Weman, Bjørn-Ove Fimland

    III-V semiconductor nanowires are considered promising building blocks for advanced photonic devices. One of the key advantages is that the lattice mismatch can easily be accommodated in 1D structures, resulting in superior heteroepitaxial quality compared to thin films. However, few reports break the limitation of using bulk crystalline materials as substrates for epitaxial growth of high-quality photonic 1D components, making monolithic integration of III-V components on arbitrary substrates challenging. In this work, we show that the growth of self-catalyzed GaAsSb nanowires on graphitic substrates can be promoted by creating step edges of monolayer thickness on kish graphite before the growth. By further alternating the deposition sequence of the group-III element Al and the group-V elements As and Sb, it was found that triangular crystallites form when Al is deposited first. This indicates that the surface binding energy between the graphitic surface and the III-V nucleus profoundly influences the epitaxial growth of III-V materials on graphitic surfaces. Using the optimized growth recipe with an AlAsSb buffer nuclei, vertical [111]-oriented GaAsSb/GaAs nanowires with GaAsSb-based multiple axial superlattices were grown on exfoliated graphite, which was attached to a (001) AlAs/GaAs distributed Bragg reflector (DBR) using the simple Scotch tape method. Fabry-Pérot resonance modes were observed under optical excitation at room temperature, indicating a successful monolithic integration with optical feedback from the DBR system. These results demonstrate the great potential for flexible integration of high-efficiency III-V nanowire photonic devices on arbitrary photonic platforms using a 2D material buffer layer, e.g., graphene, without breaking the orientation registry.

  • Widely Tunable Y-Junction Lasers at 2.34–2.39 μm Wavelength for Trace-Gas Sensing Applications

    by Thanh-Nam Tran, Saroj Kumar Patra, Kjetil Haddeland, Magnus Breivik, Bjørn-Ove Fimland

    Widely tunable Y-junction lasers have been realized in the wavelength range of 2.34 - $2.39~\mu \text{m}$ for trace-gas sensing application. Y-junction structures with large bend radius and small length difference between the two cavities have been chosen to maximize the output power and wavelength tunability while having sufficient side mode suppression ratio (SMSR). By changing the electric currents in different sections of the Y-junction lasers, a tunable wavelength range of 50 nm with an SMSR > 23 dB was achieved.


  • Open Access

    Focused ion beam lithography for position-controlled nanowire growth

    by Aleksander B Mosberg, Dingding Ren, Lyubomir Ahtapodov, Helge Weman, Bjørn-Ove Fimland, Antonius T J van Helvoort

    To exploit the promising properties of semiconductor nanowires and ensure the uniformity required to achieve device integration, their position on the growth substrate must be controlled. This work demonstrates the direct patterning of a SiO2/Si substrate using focused ion beam (FIB) patterning to control self-catalyzed GaAsSb nanowire growth in molecular beam epitaxy (MBE). Besides position control, FIB patterning parameters influence nanowire yield, composition and structure. Total ion dose per hole is found to be the most important parameter. Yield of single nanowires ranges from ≈34% to ≈83%, with larger holes dominated by multiple nanowires per hole. Areas exposed to low ion beam doses are selectively etched by routine pre-MBE HF cleaning, enabling patterning and nanowire nucleation with minimal damage to the Si substrate. The optical and electronic properties of nanowires are found to depend on the ion dose used during patterning, indicating the potential for FIB patterning to tune nanowire properties. These findings demonstrate the possibility for a FIB lithography protocol which could provide a rapid and direct patterning process for flexible controlled nanowire growth.


  • Open Access

    Graphene-Based Transparent Conducting Substrates for GaN/AlGaN Nanocolumn Flip-Chip Ultraviolet Light-Emitting Diodes

    by Andreas Liudi Mulyo, Anjan Mukherjee, Ida Marie Høiaas, Lyubomir Ahtapodov, Tron Arne Nilsen, Håvard Hem Toftevaag, Per Erik Vullum, Katsumi Kishino, Helge Weman, Bjørn-Ove Fimland


  • Open Access

    The influence of AlN buffer layer on the growth of self-assembled GaN nanocolumns on graphene

    by Andreas Liudi Mulyo, Mohana K. Rajpalke, Per Erik Vullum, Helge Weman, Katsumi Kishino, Bjørn-Ove Fimland

    GaN nanocolumns were synthesized on single-layer graphene via radio-frequency plasma-assisted molecular beam epitaxy, using a thin migration-enhanced epitaxy (MEE) AlN buffer layer as nucleation sites. Due to the weak nucleation on graphene, instead of an AlN thin-film we observe two distinguished AlN formations which affect the subsequent GaN nanocolumn growth: (i) AlN islands and (ii) AlN nanostructures grown along line defects (grain boundaries or wrinkles) of graphene. Structure (i) leads to the formation of vertical GaN nanocolumns regardless of the number of AlN MEE cycles, whereas (ii) can result in random orientation of the nanocolumns depending on the AlN morphology. Additionally, there is a limited amount of direct GaN nucleation on graphene, which induces non-vertical GaN nanocolumn growth. The GaN nanocolumn samples were characterized by means of scanning electron microscopy, transmission electron microscopy, high-resolution X-ray diffraction, room temperature micro-photoluminescence, and micro-Raman measurements. Surprisingly, the graphene with AlN buffer layer formed using less MEE cycles, thus resulting in lower AlN coverage, has a lower level of nitrogen plasma damage. The AlN buffer layer with lowest AlN coverage also provides the best result with respect to high-quality and vertically-aligned GaN nanocolumns.


  • Epitaxially grown III-arsenide-antimonide nanowires for optoelectronic applications

    by Dingding Ren, Lyubomir Ahtapodov, Antonius T J van Helvoort, Helge Weman, Bjørn-Ove Fimland

    Epitaxially grown ternary III-arsenide-antimonide (III-As–Sb) nanowires (NWs) are increasingly attracting attention due to their feasibility as a platform for the integration of largely lattice-mismatched antimonide-based heterostructures while preserving the high crystal quality. This and the inherent bandgap tuning flexibility of III-As–Sb in the near- and mid-infrared wavelength regions are important and auspicious premises for a variety of optoelectronic applications. In this review, we summarize the current understanding of the nucleation, morphology-change and crystal phase evolution of GaAsSb and InAsSb NWs and their characterization, especially in relation to Sb incorporation during growth. By linking these findings to the optical properties in such ternary NWs and their heterostructures, a brief account of the ongoing development of III-As–Sb NW-based photodetectors and light emitters is also given.