María Dolores Gutiérrez-Álvarez

A series of silica-supported polymeric ionic liquid (PIL)-based stationary phases derived from a vinylic L-valine ionic liquid monomer and divinylbenzene (DVB) as the crosslinking agent have been prepared and studied as gas chromatographic stationary phases. These coated gas chromatographic columns exhibited good thermal stabilities (230–300 °C) and high efficiencies (1700–2700 plates/m), and were characterized using a linear solvation parameter model in order to understand the effects of the amount of DVB on the features of the resulting composite systems. Their retention behavior and separation efficiencies were demonstrated using the Grob test. By tuning the crosslinking degree for the IL-derived stationary phase, the separation selectivity and resolution of different compounds were improved. The different retention behaviors observed for many analytes indicate that these stationary phases may be applicable as new types of GC stationary phases.

A chromatographic method for the separation of volatile compounds in Asturian cider apple juices has been developed. For this separation purpose, a monocationic imidazolium-based ionic liquid bearing a reactive terminal iodine atom was synthesized by a quaternization-anion exchange chemical sequence. Next, the gas chromatography (GC) stationary phase was prepared by covalently linking the imidazolium monolith to the reactive silanol groups of the inner capillary wall at 70 °C. This coated GC column exhibited good thermal stability (290 °C), as well as good efficiency (2000 plates/m) in the separation of volatile compounds from Asturian apple cider juices, and was characterized using the Abraham solvation parameter model. The intra-day and inter-day precision of the chromatographic method was evaluated, obtaining relative standard deviations from 3.7 to 12.9% and from 7.4 to 18.0%, respectively. Furthermore, recoveries from 82.5 to 122% were achieved. Covalent bonding of an ionic liquid to inner column wall led to a great improvement of the separation efficiencies of stationary phases in gas chromatography

The incorporation of graphene oxide sheets into phosphonium ionic liquid stationary phases led to a great improvement of their separation efficiencies.

A chemometric study was carried out to characterize three ionic liquid types (ILs) with hexacationic imidazolium, polymeric imidazolium, and phosphonium cationic cores, using a range of contra-anions such as halogens, thiocyanate, boron anions, triflate, and bistriflimide. The solvation parameter model developed by Abraham et al., unsupervised techniques as cluster analysis (CA), and supervised techniques as linear discriminant analysis (LDA), step-LDA, quadratic discriminant analysis (QDA), and multivariate regression techniques as discriminant partial least squares (D-PLS), or multiple linear regression (MLR) were used to characterize the functionalized ILs above. CA established two main groups of phases, those with an acidic H-bond and those with basic ones. Once detected, the two natural groups, a linear and quadratic delimiters with good classification (>96 %) and prediction (>92 %) capacities were computed. The use of step-LDA technique allowed us to establish that a, b, and s solvation parameters were the most discriminant variables. These variables were used for modeling purposes, and a D-PLS and MLR models were constructed using a binary response. The explained variance of categorical variable by the model validated by cross-validation was 65 %, and 94.5 % of ILs were correctly predicted. IL characterization carried out would allow the appropriate selection of phases for gas chromatography (GC).

New phosphonium-based ionic liquids (ILs) were prepared and used as polymeric stationary phases in gas chromatography. The resulting columns exhibit exceptional thermal stability (250–360 °C) and unique selectivity for organic compounds, both polar and apolar (alkanes, alcohols, polycyclic aromatic hydrocarbons and pesticides). The excellent separation efficiencies obtained prove that the ILs do not lose the dual nature after polymerization. Incorporation of sheets of graphene oxide improved considerably the efficiency of the columns.