AKAnandrao B. Kakade

Anandrao B. Kakade

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anandrao B. Kakade has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • DESIGN AND ANALYSIS OF HIGH STABILITY SWITCH MODE POWER SUPPLY FOR REVERSE OSMOSIS WATER PURIFIER

    by Kaustubh Pise, Anandrao Kakade

    Design and development of a switch-mode power supply tailored for reverse osmosis (RO) water purifiers is presented, delivering a regulated 24V, 2.5A DC output. A flyback converter topology was selected due to its compact size, inherent galvanic isolation, and suitability for medium-power applications. The system operates in Continuous Conduction Mode (CCM), ensuring steady energy transfer between the transformer’s windings, which reduces output ripple and enhances dynamic response under variable loads. The SMPS maintains voltage regulation within ±1.2% across a broad AC input range of 150V to 260V, addressing common variations in residential voltage. Efficiency exceeds 82% at nominal load, while output ripple remains below 60 mV-adequate for sensitive RO components, such as pumps, solenoids, and control modules. The initial prototype was built on a breadboard, followed by realization on a custom PCB optimized for electromagnetic interference mitigation and thermal performance. Integration with a domestic RO system confirmed the design’s reliability. Under prolonged operation, the power supply stabilized thermally at approximately 60°C without requiring active cooling. Cost-effectiveness, compactness, and electrical stability are key strengths of this design. The use of CCM flyback operation, precise feedback control, and robust filtering techniques contributes to efficient and reliable long-term performance. This implementation offers a practical and replicable approach for engineers developing SMPS units for low- to medium-power applications where space, efficiency, and stable output are critical.

  • Open Access

    DS-RAE: Advance Hybrid Double Residual SelfAttention and Recursive Autoencoder Approachfor Dynamic Cloud Workload Forecasting

    by G. M. Kiran, A. Aparna Rajesh, D. Basavesha

    Infrastructure as a service is used for resource management. Resources that will be available on demand are effectively managed using the resource management module. Predicting CPU and memory usage assists with resource management when cloud resources are provided. This study uses a hybrid DS-RAE model to forecast CPU and memory utilization in the future. Predictions are made using the range of values found, which is helpful for resource management. The memory and CPU use patterns in the cloud traces are identified by the Double Channel Residual Self-Attention Temporal Convolution Network (DSTNW) model as having linear components. The Recursive Autoencoder (RAE) model for tracing and enlarging nonlinear components and power consumption was developed using the DSTNW model. Gathers the raw data taken from the system's operational state, such as bandwidth, disk I/O time, disk space, CPU, and memory utilization. Discover patterns and oscillations in the workload trace by preprocessing the data to increase the prediction efficacy of this model. During data pre-processing, missing value edge computing and z-score normalization are used to select the important properties from raw data samples, eliminate irrelevant elements, and normalize them. After that, preprocessing utilizes a dynamization of the sliding window to improve the proposed model's accuracy on non-random workloads. Next, utilize a hybrid DS-RAE to attain accurate workload forecasting. Comparing the suggested methodology with existing models, experimental results show that it offers a better trade-off between training time and accuracy. The suggested method provides higher performance, with an execution time of 32 seconds and an accuracy rate of 97%. According to the simulation results, the DS-RAE workload prediction method performs better than other algorithms.

  • Open Access

    Battery charging system for electric vehicle

    by Nayan J. Kotmire, Anandrao B. Kakade

    Selecting the appropriate charger for electric vehicles (EVs) is crucial for enhancing performance, with non-isolated DC-DC converters playing a significant role in charging EV batteries. The efficient conversion of input power into output as per the requirement is main perspective in the design of DC-DC converters. This paper delves into the landscape of non-isolated DC-DC converters utilized in EV charging, emphasizing their pivotal role. Additionally, it introduces a novel approach by incorporating machine learning-based pulse width modulation (PWM) control for the buck DC-DC converter. By integrating machine learning algorithms into the control scheme, the efficiency and performance of the charging system can be greatly enhanced, resulting in improved overall EV operation. This innovative application of machine learning not only optimizes charging efficiency but also enables adaptability to varying input/output conditions, ultimately leading to more efficient and effective charging processes for EVs.


  • Open Access

    Brain tumour segmentation in MRI using fuzzy deformable fusion model with Dolphin-SCA

    by A.H. Tiple, A.B. Kakade

    It is evident that when the human brain stops functioning for a small period of time, it will lead to death. As a result, dealing with brain disorders should be done early and properly. A brain tumour is one of the most serious brain illnesses. The development of tumours can be detected using Magnetic Resonance Imaging (MRI). However, because an MRI image has loud noise, it can be hard to diagnose a tumour. The diagnosis process is slow, yet illness necessitates prompt and accurate medical attention in order for patients to survive. One of the solutions for tumour diagnosis is to employ MRI brain picture segmentation. In this designed model, MRI of the brain is collected and pre-processed with Non-Local Means (NLM) to reduce noise from captured raw data. This pre-processed image is first segmented with Region of Interest (ROI) for identifying regions of interest and then with a fusion deformable fuzzy system, which combines fuzzy C-means (FCM) and deformable systems. By analyzing the fitness value of α and β constants, segmented pictures from models are fused using the Dolphin Sine Cosine Algorithm (SCA) method to combine the model results. The integrated output from the algorithm is classified with the deep Convolutional Neural Network (CNN) classifier. The created model experimental findings are analyzed and compared to current methodologies. The proposed model performance measures are 0.90, 0.89, 0.88, and 0.10 in terms of selectivity, precision, accuracy and errors. As a result, when compared to previous strategies, the proposed approach outperforms them.


  • Comparative design and analysis of both conventional and metamaterial loaded microstrip patch antenna

    by Gayatri R. Vidhate, Anandrao B. Kakade

    The comparative design and analysis of both conventional and metamaterial loaded microstrip patch antenna has provided. A novel structure of metamaterial is proposed in order to miniaturize the U-shaped micro-strip patch antenna. A new design methodology for producing miniaturized U-shaped patch antenna is introduced. The methodology uses interdigital capacitor provided on one arm of U-shaped patch antenna. The proposed antenna located on a 60mm×60mm FR4 substrate with 1.6mm thickness and dielectric constant of 4.4.The conventional antenna has designed for same dimensions as metamaterial loaded U-shaped patch antenna. Both antennas are fed by using co-planar waveguide (CPW) method. Simulation results for return loss and radiation pattern of both proposed and conventional antenna are shown and compared with practical results. These structures are simulated using CADFEKO Simulation Software.


  • Ultrawideband slotted semicircular patch antenna

    by Trupti M. Telsang, A. B. Kakade


  • Wideband circularly polarized conformal strip fed three layer hemispherical dielectric resonator antenna with parasitic patch

    by Anandrao B. Kakade, M. S. Kumbhar

    In this work, a circularly polarized conformal strip fed three‐layer hemispherical dielectric resonator antenna (HDRA) with parasitic patch is analyzed theoretically and experimentally. The effect of position of conformal strip and parasitic patch at first and third dielectric layer interfaces of three‐layer HDRA is investigated for impedance and axial ratio (AR) bandwidths. The optimized permittivities of the layers and conformal strip and patch locations are found for three‐layer HDRA to realize wide impedance and AR bandwidths. The antenna structure is analyzed using Green's function and method of moments approach. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:72–77, 2014


  • Guided Modes in a Metamaterial-Filled Circular Waveguide

    by Bratin Ghosh, Anandrao B. Kakade

    In this article, characteristics of circular waveguides filled with metamaterials are studied. Also, for the first time, hybrid modes are investigated, and several new conclusions in hybrid mode behavior are drawn. Particularly, conditions under which the hybrid mode separates into the transverse electric and transverse magnetic (n = 0) modes are obtained. This condition eases mode excitation in the waveguide without power being coupled to the undesired modes. Frequency dispersive behavior of the modes under isotropic conditions is addressed with potential applications. The anisotropic implementation, which offers a good technique for the practical realization of metamaterial-filled circular guides, is also investigated.