Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Melih Basaraner has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spatio-temporal investigation of urbanization and its impact on habitat fragmentation in natural ecosystems of Istanbul using Shannon’s entropy and landscape metrics in GIS

    by Selvinaz Gülçin Bozkurt, Melih Basaraner

    This study aims to investigate the impact of spatio-temporal dynamics of urban sprawl on habitats in Istanbul, using the CORINE 1990 and 2018 land cover datasets. In this context, by means of geographic information system (GIS) tools and techniques, land cover maps are created for land cover change analysis and visualization, the Shannon’s entropy method is performed for measuring urban growth and sprawl, and the landscape metrics method is applied for assessing habitat loss and fragmentation. Results indicate that the rate of urban sprawl in the area increased by 0.1230 as per the Shannon’s entropy index over the 28-year period. Similarly, the Shannon Diversity Index and the Shannon Evenness Index rose from 1.74 to 1.85 and from 0.68 to 0.70, respectively, indicating an increase in urbanization within the area. Moreover, an analysis of patch numbers reveals that habitat fragmentation increased in shrub and/or herbaceous vegetation associations (72.55%), heterogeneous agricultural areas (45.11%), arable lands (42.5%), forests (36.13%) and pastures (15.05%), due to urbanization. Habitat fragmentation has had a detrimental effect on the local biodiversity. While 15 flora species were identified as vulnerable, 13 as endangered and 9 as critically endangered, 19 fauna species were identified as vulnerable and 5 as endangered. This study highlights that the natural habitats and biodiversity of Istanbul will suffer further decline due to urbanization unless sustainable urban planning and management policies are put into practice. It is essential to have controlled urban development to preserve the ecosystem’s carrying capacity, and urbanization decisions must consider this requirement.


  • Yapı Bilgi Modellemesi ve Coğrafi Bilgi Sistemleri Entegrasyonu için IFC’den CityGML ve CityJSON Veri Formatlarına Dönüşümün İncelenmesi

    by Özlem Korkmaz, Melih Başaraner

    Yapı bilgi modellemesi (YBM) ve coğrafi bilgi sistemleri (CBS) entegrasyonu; yapı ve tesis planlama ve yönetimi, akıllı şehirler ve mekânsal dijital ikiz gibi uygulamalar için kritik öneme sahiptir. YBM, yapı yaşam döngüsü boyunca zengin geometrik ve semantik bilgilere sahipken, CBS; mekânsal modelleme, analiz ve görselleştirme yetenekleri sağlar. Bu nedenle, YBM ve CBS iç ve dış mekân bağlamında birbirini tamamlayan temel sistemlerdir. Öte yandan, uygulama odakları, mekânsal kapsamlar, koordinat sistemleri, semantik ve geometrik temsiller ve ayrıntı düzeyleri açısından farklılıklara sahip olmaları, bu iki sistemin entegrasyonunda zorluklar meydana getirmektedir. Entegrasyon için veri düzeyinde geometrik dönüşüm ve semantik aktarım yapılmalıdır. YBM verileri için genel olarak endüstri temel sınıfları (IFC), CBS verileri için ise CityGML, CityJSON veya shape dosyası formatı kullanılmaktadır. Entegrasyon için bazı teknikler ve teknolojiler mevcut olsa da halen çözülmemiş sorunlar mevcuttur. Bu nedenle, YBM ve CBS entegras-yonu ve veri değişim formatları aktif araştırma konusu olmaya devam etmektedir. CityJSON’ın kent mo-dellerini 3B temsil etmek için kullanılan yeni bir veri standardı olması nedeniyle veri değişimi için uygu-lanmasına yönelik çok fazla çalışma bulunmamaktadır. Ayrıca, CityGML’in hafif versiyonu olarak oluştu-rulan CityJSON’ın uygulamalarda CityGML’den farkı merak konusudur. Bu çalışmada, IFC formatındaki üç farklı yapıya ait YBM veri seti, semantik aktarım ve geometrik dönüşüm ile Safe FME Workbench yazılımı kullanılarak CityGML ve CityJSON formatlarına dönüştürülmüştür. Bu bağlamda, YBM’den CBS’ye dönüşüm incelenmiş ve CityGML ile CityJSON veri değişim formatları ile elde edilen bulgular değerlendirilmiştir.

  • Open Access

    İç mekân navigasyon rotaları ve yayaların yürüme örüntüleri arasındaki geometrik benzerliklerin Coğrafi Bilgi Sistemi ve Çok Kriterli Karar Analizi aracılığıyla değerlendirilmesi

    by Atakan Bi̇lgi̇li̇, Alper Şen, Melih Başaraner

    Navigasyon ağ modelleri aracılığıyla yayaları bir iç mekânda yönlendirirken, yayalara sunulan iç mekân rotaları, yön bulma eyleminde başarıya ulaşmaları için yayaların mekânsal bilişlerine uygun olmalı ve böylece yayaların bilişsel yüklerini azaltmalıdır. Bu açıdan, yayalara sunulan iç mekân rotaları ve onların iç mekân içerisindeki gerçek yürüyüş örüntüleri geometrik açıdan benzer olmalıdır. Bu çalışmada, literatürde sıklıkla kullanılan dört navigasyon ağ modeli çalışma alanı için oluşturulmuştur. Ardından, çalışma alanında bir kullanıcı deneyi yapılarak yayaların iç mekân yürüyüş örüntüleri toplanmış ve CBS ortamında yeniden oluşturulmuştur. Bu işlemi takiben, yayaların yürüdüğü altı segment için ağ modelleri kullanılarak iç mekân rotaları hesaplanmıştır. Daha sonra, hesaplanan iç mekân rotaları ve yayaların yürüyüş örüntüleri için çeşitli geometrik benzerlik ölçüleri hesaplanmıştır. Geometrik benzerlik ölçüleri Bulanık Analitik Hiyerarşi Süreci (BAHS) yöntemi ile ağırlıklandırılarak ağ modelleri aracılığıyla üretilen iç mekân rotaları ve yayaların yürüyüş örüntüleri geometrik benzerlik açısından İdeal Çözüme Benzerliğine Göre Tercih Sıralaması Tekniği (Technique for Order Preference by Similarity to Ideal Solution - TOPSIS) yöntemi ile karşılaştırılmıştır. Deneysel çalışmada elde edilen bulgulara göre, Orta Nokta İlişki Yapısı Segment Girişi (ONİYSG) ağ modeli, çalışma alanı için geometrik benzerlik açısından yayaların yürüyüş örüntülerine en benzer ağ modeli olarak bulunmuştur, ONİYSG ağ modelini, sırasıyla Orta Eksen Dönüşümü (OED) tabanlı ağ modeli ve Grid tabanlı ağ modeli izlemiştir. Literatürde rota uzunluğu ve dönüş sayısı kriteri için en uygun bulunan görünürlük bölümlendirmesi tabanlı Evrensel Dolaşım Ağı (EDA) ağ modeli ise geometrik benzerlik açısından en geride kalmıştır.


  • Şekil göstergeleri ve topluluk öğrenmesi sınıflandırma algoritmaları ile bina detaylarının şekil karmaşıklık analizi

    by Hüseyin Safa Duman, Melih Başaraner

    Şekil analizi, bilgisayar görüsü, coğrafi bilgi bilimi, kartografya, uzaktan algılama, kent morfolojisi, arazi yönetimi ve ekoloji gibi çeşitli alanlarda mekansal olguları/nesneleri karakterize etmek ve mekansal örüntüleri ortaya çıkartmak için kullanılır. Bu bağlamda, şekil göstergeleri, genel olarak mekansal detayların geometrilerinin ve/veya onlardan türetilen yardımcı geometrilerin metrik özellikleri yardımıyla karmaşıklık ve benzerlik gibi şekilsel karakteristikleri niceliksel olarak ifade ederler. Bununla birlikte, şekil göstergeleri mekansal detayların farklı şekilsel özelliklerini ölçmektedir. Bu nedenle, bir detayı şekilsel olarak karakterize ederken tek bir şekil göstergesinin kullanımı her zaman yeterli olmaz. Ayrıca, bu amaçla uygun sınıflandırma yöntemlerinin kullanılması da önemlidir. Bu çalışmada, dairesellik, dışbükeylik ve dikdörtgensellik şekil göstergeleri ile rastgele orman ve gradyan artırma topluluk öğrenme sınıflandırma algoritmaları birlikte kullanılarak 300 adet bina detayı şekilsel karmaşıklık düzeylerine göre basit, orta ve karmaşık olarak sınıflandırılmıştır. Görsel algıya dayalı olarak etiketlenen veri setiyle karşılaştırıldığında rastgele orman algoritması %93.33 genel doğruluk (K = 0.900) üretirken, gradyan artırma algoritması ise %92.33 genel doğruluk (󠆻K = 0.885) üretmiştir. Bu bulgular, bina detaylarının şekilsel karmaşıklık düzeylerinin, çeşitli şekil göstergeleri ve yaygın kullanılan topluluk öğrenmesi sınıflandırma algoritmaları aracılığıyla oldukça yüksek bir doğrulukla sınıflandırılabileceğini göstermiştir.


  • An approach for multi-scale urban building data integration and enrichment through geometric matching and semantic web

    by Abdulkadir Memduhoglu, Melih Basaraner

    The advent of Web 2.0 has emerged abundant but often unstructured user-generated georeferenced data, such as those from Volunteered Geographic Information (VGI) initiatives. In many cases, these data can be considered as complementary to the authoritative geospatial data. With the increasing availability of multi-source geospatial data, the efforts for geospatial data integration have gained momentum, aiming at gathering maximum information to answer sophisticated questions that cannot be answered using a single data source. Although there are various approaches employed for this purpose with different degrees of success, semantic web methods and tools have not been tested sufficiently in this scope, particularly for multi-scale urban building data integration and enrichment. Attempting to fill this gap, in this study, multi-source and multi-scale urban building data were integrated with a geometric matching method based on the overlapping area, then a geospatial ontology was developed to define multi-scale representations and detailed cardinality relations of the building features. Finally, some features from the geospatial ontology were then linked to popular knowledge bases such as DBpedia and YAGO. For the exploitation on the web, query and visualization processes were demonstrated using sample questions. The semantic web enabled to model complex cardinality of relations between the features from three different building data sets using inferencing and Semantic Web Rule Language (SWRL). The study showed that integrating different geospatial data sets as a knowledge base can facilitate answering sophisticated questions from different users.


  • Open Access

    A Zonal Displacement Approach via Grid Point Weighting in Building Generalization

    by Kadir Sahbaz, Melih Basaraner

    When generalizing a group of objects, displacement is an essential operation to resolve the conflicts arising between them due to enlargement of their symbol sizes and reduction of available map space. Although there are many displacement methods, most of them are rather complicated. Therefore, more practical methods are still needed. In this article, a new building displacement approach is proposed. For this purpose, buildings are grouped and zones are created for them in the blocks via Voronoi tessellation and buffering. Linear patterns are then detected through buffer analyses and the respective zones are narrowed to be able to preserve these patterns. After all the buildings are displaced inside their zones, grid points are generated and then weighted through kernel density estimation and buffer analyses to find suitable locations. Accordingly, the buildings are displaced toward the computed locations iteratively. The proposed approach directly enforces minimum distance and positional accuracy constraints while several indirect mechanisms are used for preserving spatial patterns and relationships. For the quality evaluation of the displacement, the angle, length and shape comparison measures are introduced, computed based on the (Delaunay) triangles or the azimuth comparison measure of the connection lines, generated for the buildings. The quality evaluation criteria are yielded according to the visual assessment of the displacement quality and the quantitative analysis of the measures. The findings demonstrate that the proposed approach is quite effective and practical for zonal building displacement.


  • Open Access

    Geometric and semantic quality assessments of building features in OpenStreetMap for some areas of Istanbul

    by Melih Basaraner

    Nowadays volunteered geographic information (VGI) and collaborative mapping projects such as OpenStreetMap (OSM) have gained popularity as they not only offer free data but also allow crowdsourced contributions. Spatial data entry in this manner creates quality concerns for further use of the VGI data. In this regard, this article focuses on the assessments of geometric and semantic quality of the OSM building features (BFs) against a large-scale topographic (TOPO) data belonging to some areas of Istanbul. The comparison is carried out based on the one-to-one matched BFs according to a geometric matching ratio. In geometric terms, various parameters of position (i.e. X, Y), size (i.e. area, perimeter and granularity), shape (i.e. convexity, circularity, elongation, equivalent rectangular index, rectangularity and roughness index), and orientation (i.e. orientation angle) elements are computed and compared. In semantic terms, BF type coherences are evaluated. According to the findings of geometric quality, the average positional difference was less than three meters. In addition, the perimeter values tended to decrease while area and granularity values tended to increase in OSM data against TOPO data. Those showed that the level of the detail of the OSM BFs was lower than TOPO BFs in general. This was also confirmed by the decreasing tendency of shape complexity according to the parameters of shape element. Orientation angle differences was often low except for some special cases. It was found that the scale of the OSM dataset, even though not homogenous, approximately corresponded to the lower limit of medium scale maps (i.e. 1:10,000) or a slightly smaller scale. According to the findings of semantic quality, in case of the presence of specific type definition, the coherence was rather high between OSM and TOPO BFs while the most OSM BFs did not have a specific type attribute. This study showed that the matching process needed some improvements while the followed approach was largely successful in the evaluation of the matched buildings from geometric and semantic aspects.