Jing Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Xiao has a total of 211 co-authors. Here are the top co-authors by number of shared publications:
Cuiting Yang
Joint Institute of Advanced Materials and Green Energy Research
15 shared publicationsGuang Miao
Joint Institute of Advanced Materials and Green Energy Research
15 shared publications- Zhong Li
School of Chemistry and Chemical Engineering South China University of Technology Guangzhou China
15 shared publications Jiawu Huang
School of Chemistry and Chemical Engineering
13 shared publicationsZhong Li
11 shared publicationsXiaoying Zhou
School of Chemistry and Chemical Engineering, Guangdong Provincial Key Lab of Green Chemical Product Technology South China University of Technology Guangzhou People's Republic of China
9 shared publications
Latest Publications
- 9 October 2026
- Published by Wiley in AIChE Journal
Inverse adsorption strategy for n ‐hexane ultra‐deep purification on Zn‐ LTA zeolite via pressure swing adsorption
The production of ultra‐high purity n ‐hexane ( n HEX, ≥99.99%) is critical for electronics industry, yet its purification from branched and cyclic isomers remains challenging. Herein, we develop a Zn 2+ ‐exchanged LTA zeolite (0.05Zn‐LTA), which forms hierarchical micro‐mesoporous structure at Zn 2+ exchange degree of 78%. This unique architecture enhances n HEX diffusion by approximately two orders of magnitude (from 3.6 × 10 −5 to 6.7 × 10 −3 s −1 ). 0.05Zn‐LTA exhibits an n HEX uptake of 155 mg g −1 at 298 K and P / P 0 = 0.9, with high selectivity and excellent cyclic stability. Predicted high‐temperature adsorption isotherms and breakthrough curves confirm its excellent dynamic capacity for n HEX at 473 K. To mimic its performance in n HEX purification, the pressure swing adsorption process (PSA‐4S‐PE) is developed, upgrading n HEX purity from 99.1% to 99.9929%, with 96.05% recovery and productivity of 1.05 mol kg −1 h −1 . This study demonstrates 0.05Zn‐LTA as a promising adsorbent for energy‐efficient PSA to produce electronic‐grade n HEX through the reverse adsorption of bulk compounds.
- 9 October 2026
- Published by Wiley in AIChE Journal
Inverse adsorption strategy for n ‐hexane ultra‐deep purification on Zn‐ LTA zeolite via pressure swing adsorption
The production of ultra‐high purity n ‐hexane ( n HEX, ≥99.99%) is critical for electronics industry, yet its purification from branched and cyclic isomers remains challenging. Herein, we develop a Zn 2+ ‐exchanged LTA zeolite (0.05Zn‐LTA), which forms hierarchical micro‐mesoporous structure at Zn 2+ exchange degree of 78%. This unique architecture enhances n HEX diffusion by approximately two orders of magnitude (from 3.6 × 10 −5 to 6.7 × 10 −3 s −1 ). 0.05Zn‐LTA exhibits an n HEX uptake of 155 mg g −1 at 298 K and P / P 0 = 0.9, with high selectivity and excellent cyclic stability. Predicted high‐temperature adsorption isotherms and breakthrough curves confirm its excellent dynamic capacity for n HEX at 473 K. To mimic its performance in n HEX purification, the pressure swing adsorption process (PSA‐4S‐PE) is developed, upgrading n HEX purity from 99.1% to 99.9929%, with 96.05% recovery and productivity of 1.05 mol kg −1 h −1 . This study demonstrates 0.05Zn‐LTA as a promising adsorbent for energy‐efficient PSA to produce electronic‐grade n HEX through the reverse adsorption of bulk compounds.
- 12 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (28) , 15233-15241
Computationally Guided Design of Tandem Zeolite Beds for Efficient Purification of Hexafluoro-1,3-butadiene from Multicomponent Systems
- 12 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (28) , 15233-15241
Computationally Guided Design of Tandem Zeolite Beds for Efficient Purification of Hexafluoro-1,3-butadiene from Multicomponent Systems
- 5 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (19) , 8988-8998
A General Strategy for Constructing Two-Dimensional MOFs in Ethylene Glycol: Application in Tandem Conversion of Styrene and CO 2
- 5 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (19) , 8988-8998
A General Strategy for Constructing Two-Dimensional MOFs in Ethylene Glycol: Application in Tandem Conversion of Styrene and CO 2
- 4 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (8) , 4334-4342
Manipulation of Pore Interface of π-Conjugated Carbon Networks for Benchmark C 2 H 2 /C 2 H 4 Adsorptive Separation
- 4 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (8) , 4334-4342
Manipulation of Pore Interface of π-Conjugated Carbon Networks for Benchmark C 2 H 2 /C 2 H 4 Adsorptive Separation
- 2 February 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (5)
Precise pore engineering of multivariate metal–organic frameworks for boosting hexane isomers separation
The adsorptive separation of hexane isomers is a critical yet challenging process in the petrochemical industry. In this study, a series of pillar‐layer MOF materials, CuCam‐Apyz/Dabco, were successfully synthesized using a multivariate metal–organic framework (MTV‐MOF) strategy, enabling systematic pore environment tuning by adjusting pillar ligand ratios. Among them, CuCam‐Apyz 0.48 Dabco 0.52 exhibited the most favorable sieving performance for hexane isomers. This material selectively adsorbed n‐hexane (nHEX, 1.83 mmol/g) and 3‐methylpentane (3MP, 1.41 mmol/g), while nearly excluding 2,2‐Dimethylbutane (22DMB, 0.04 mmol/g). The resulting uptake ratios of nHEX/22DMB and 3MP/22DMB mixtures reached 46.9 and 35.3, respectively, exceeding those reported for most MOFs to date. Density functional theory (DFT) calculations further elucidated the nature of host‐guest interactions and revealed distinct diffusion energy barriers and binding energies among the isomers, confirming a size‐exclusion‐based separation mechanism. Additionally, breakthrough experiments and stability tests validated its efficiency and robustness, highlighting its potential for industrial hexane isomer separation.
- 2 February 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (5)
Precise pore engineering of multivariate metal–organic frameworks for boosting hexane isomers separation
The adsorptive separation of hexane isomers is a critical yet challenging process in the petrochemical industry. In this study, a series of pillar‐layer MOF materials, CuCam‐Apyz/Dabco, were successfully synthesized using a multivariate metal–organic framework (MTV‐MOF) strategy, enabling systematic pore environment tuning by adjusting pillar ligand ratios. Among them, CuCam‐Apyz 0.48 Dabco 0.52 exhibited the most favorable sieving performance for hexane isomers. This material selectively adsorbed n‐hexane (nHEX, 1.83 mmol/g) and 3‐methylpentane (3MP, 1.41 mmol/g), while nearly excluding 2,2‐Dimethylbutane (22DMB, 0.04 mmol/g). The resulting uptake ratios of nHEX/22DMB and 3MP/22DMB mixtures reached 46.9 and 35.3, respectively, exceeding those reported for most MOFs to date. Density functional theory (DFT) calculations further elucidated the nature of host‐guest interactions and revealed distinct diffusion energy barriers and binding energies among the isomers, confirming a size‐exclusion‐based separation mechanism. Additionally, breakthrough experiments and stability tests validated its efficiency and robustness, highlighting its potential for industrial hexane isomer separation.
- 25 November 2025
- Published by Wiley in AIChE Journal
- Vol. 72 (3)
Manipulation of ultramicropore sizes of resin‐derived carbon granules for diverse fluoro‐electronic gas purifications
Ultrapure fluoride electronic gases (e.g., C 3 F 8 and C 2 HF 5 ) constitute indispensable cleaning and etching gases in semiconductor manufacturing. However, the presence of structurally analogous impurities like C 3 F 6 and C 2 ClF 5 poses great purification challenges. Herein, we explored resin‐derived carbon granules (C‐PR‐ x ) with fine‐tuned ultramicroporosity for adsorptive separation of C 3 F 6 /C 3 F 8 , C 2 ClF 5 /C 3 F 8 , and C 2 ClF 5 /C 2 HF 5 gas pairs. C‐PR‐850 (5.4 Å) performs C 3 F 6 /C 3 F 8 molecular sieving behavior with a C 3 F 6 uptake of 0.72 mmol g −1 at 0.1 kPa. C‐PR‐900 (5.6 Å) exhibits high C 2 ClF 5 /C 3 F 8 IAST selectivity of 49.9 at ambient conditions. Furthermore, C‐PR‐950 (5.9 Å) achieves preferential C 2 ClF 5 impurity removal during C 2 HF 5 purification with a high capacity of 0.79 mmol g −1 via differential confinement effects. Breakthrough experiments validate excellent purification performance, yielding >99.9999% (6 N) grade C 3 F 8 and C 2 HF 5 . The scalability, mechanical stability, and moisture resistance of C‐PR‐ x make them attractive as industrial adsorbents. This work provides a viable solution for developing scalable industrial carbon granules for effective electronic gas purification.
- 25 November 2025
- Published by Wiley in AIChE Journal
- Vol. 72 (3)
Manipulation of ultramicropore sizes of resin‐derived carbon granules for diverse fluoro‐electronic gas purifications
Ultrapure fluoride electronic gases (e.g., C 3 F 8 and C 2 HF 5 ) constitute indispensable cleaning and etching gases in semiconductor manufacturing. However, the presence of structurally analogous impurities like C 3 F 6 and C 2 ClF 5 poses great purification challenges. Herein, we explored resin‐derived carbon granules (C‐PR‐ x ) with fine‐tuned ultramicroporosity for adsorptive separation of C 3 F 6 /C 3 F 8 , C 2 ClF 5 /C 3 F 8 , and C 2 ClF 5 /C 2 HF 5 gas pairs. C‐PR‐850 (5.4 Å) performs C 3 F 6 /C 3 F 8 molecular sieving behavior with a C 3 F 6 uptake of 0.72 mmol g −1 at 0.1 kPa. C‐PR‐900 (5.6 Å) exhibits high C 2 ClF 5 /C 3 F 8 IAST selectivity of 49.9 at ambient conditions. Furthermore, C‐PR‐950 (5.9 Å) achieves preferential C 2 ClF 5 impurity removal during C 2 HF 5 purification with a high capacity of 0.79 mmol g −1 via differential confinement effects. Breakthrough experiments validate excellent purification performance, yielding >99.9999% (6 N) grade C 3 F 8 and C 2 HF 5 . The scalability, mechanical stability, and moisture resistance of C‐PR‐ x make them attractive as industrial adsorbents. This work provides a viable solution for developing scalable industrial carbon granules for effective electronic gas purification.
- 18 August 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (34) , 16379-16386
Selective Carbon Capture via Pressure Swing Adsorption Using a Facilely Synthesized Adenine-Based Metal–Organic Framework
- 18 August 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (34) , 16379-16386
Selective Carbon Capture via Pressure Swing Adsorption Using a Facilely Synthesized Adenine-Based Metal–Organic Framework
- 11 August 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (33) , 15855-15863
Zn–N Dual-Site Activated Ultramicroporous Carbon Nanofibers for Kinetically Enhanced Ethylene/Ethane Separation
- 11 August 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (33) , 15855-15863
Zn–N Dual-Site Activated Ultramicroporous Carbon Nanofibers for Kinetically Enhanced Ethylene/Ethane Separation
- Open Access
- 25 July 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (30) , eadt9498
Tandem reaction-adsorption separation of perfluorinated cyclopropane/propane mixtures
Separating perfluorinated cyclopropane/propane mixtures is critical yet challenging for sustainably producing high-purity perfluropropane in the advanced electronics industry. Conventional one-step adsorption separation methods lack proper selectivity due to similar molecular sizes and properties. We introduce a tandem reaction-adsorption approach with ultrahigh selectivity and low-pressure uptake. The initial step converts perfluorinated cyclopropane into olefins, enhancing molecular size and polarity differences and enabling efficient sieving using a scalable, stable molecular sieve developed. The method achieves selectivity over two orders of magnitude higher than conventional methods, producing 99.9999% pure perfluropropane at 12.5 liters per kilogram per hour with a 98.8% yield in the fixed beds. The tandem reaction-adsorption methodology introduces an efficient route for separating and purifying industrially challenging gas analogs.
- 25 July 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (30) , eadt9498
Open AccessTandem reaction-adsorption separation of perfluorinated cyclopropane/propane mixtures
Separating perfluorinated cyclopropane/propane mixtures is critical yet challenging for sustainably producing high-purity perfluropropane in the advanced electronics industry. Conventional one-step adsorption separation methods lack proper selectivity due to similar molecular sizes and properties. We introduce a tandem reaction-adsorption approach with ultrahigh selectivity and low-pressure uptake. The initial step converts perfluorinated cyclopropane into olefins, enhancing molecular size and polarity differences and enabling efficient sieving using a scalable, stable molecular sieve developed. The method achieves selectivity over two orders of magnitude higher than conventional methods, producing 99.9999% pure perfluropropane at 12.5 liters per kilogram per hour with a 98.8% yield in the fixed beds. The tandem reaction-adsorption methodology introduces an efficient route for separating and purifying industrially challenging gas analogs.