Baibaswata Bhattacharjee
Baibaswata Bhattacharjee has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Nilanjana Chatterjee
Department of Zoology, Ramananda College, Bishnupur, Bankura, West Bengal 722122, India
5 shared publicationsSampa Mondal
Department of Physics, Bankura Zilla Saradamani Mahila Mahavidyapith, Bankura, West Bengal 722101, India
5 shared publications- Chung-Hsin Lu
Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan, ROC
4 shared publications - Surajit Bosu
Department of Physics, Bankura Sammilani College, Bankura, India
3 shared publications Chia-Hao Hsu
1 shared publicationChung-Hsin Lu
Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan
1 shared publication
Latest Publications
- 27 September 2025
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 92, 127764
Improvement of well-being and fish fillet nutrient value of a vulnerable minor carp, Puntius sarana (Hamilton, 1822): A result of incorporating Fe trace element in diet through α-Fe2O3 nanoparticles as dietary supplements
- 27 September 2025
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 92, 127764
Improvement of well-being and fish fillet nutrient value of a vulnerable minor carp, Puntius sarana (Hamilton, 1822): A result of incorporating Fe trace element in diet through α-Fe2O3 nanoparticles as dietary supplements
- 28 April 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (11) , 10561-10574
Multicolour Luminescence from Undoped ZnO Nanoparticles: An Exciting Outcome of Controlling the Annealing Atmosphere in a Facile Manner
ZnO nanoparticles are synthesized employing a simple wet chemical method using zinc chloride and sodium hydroxide as precursors. After synthesis, the nanoparticles are annealed at 200 °C, 250 °C, 300 °C, and 350 °C for 2 h in air medium, nitrogen medium, and vacuum. All the samples are characterized for their optical, microstructural, compositional, and photoluminescence properties. The photoluminescence spectra of ZnO nanoparticles show interesting and remarkable changes with varying annealing atmospheres. Accordingly, red, green, and blue luminescence is obtained from undoped ZnO nanoparticles covering the entire visible range. This fascinating observation of generating the primary colours can be attributed to the fact of getting control over the surface defects of undoped ZnO nanoparticles after annealing in different atmospheres. The facile technique adopted in this work will open up an easy way to produce luminescence throughout the entire visible range from ZnO nanoparticles even without doping them. Therefore, ZnO nanoparticles may have potential applications as optical materials.
- 28 April 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (11) , 10561-10574
Multicolour Luminescence from Undoped ZnO Nanoparticles: An Exciting Outcome of Controlling the Annealing Atmosphere in a Facile Manner
ZnO nanoparticles are synthesized employing a simple wet chemical method using zinc chloride and sodium hydroxide as precursors. After synthesis, the nanoparticles are annealed at 200 °C, 250 °C, 300 °C, and 350 °C for 2 h in air medium, nitrogen medium, and vacuum. All the samples are characterized for their optical, microstructural, compositional, and photoluminescence properties. The photoluminescence spectra of ZnO nanoparticles show interesting and remarkable changes with varying annealing atmospheres. Accordingly, red, green, and blue luminescence is obtained from undoped ZnO nanoparticles covering the entire visible range. This fascinating observation of generating the primary colours can be attributed to the fact of getting control over the surface defects of undoped ZnO nanoparticles after annealing in different atmospheres. The facile technique adopted in this work will open up an easy way to produce luminescence throughout the entire visible range from ZnO nanoparticles even without doping them. Therefore, ZnO nanoparticles may have potential applications as optical materials.
- 24 April 2025
- Published by Springer Nature in Emergent Materials
- p. 1-26
Tailoring the optical properties of aloe vera functionalized zinc oxide nanoparticles in quest of an ameliorated sun-blocking agent: a semi-quantitative study on photo-protection, photo-stability, antioxidant and photo-catalytic properties
- 24 April 2025
- Published by Springer Nature in Emergent Materials
- p. 1-26
Tailoring the optical properties of aloe vera functionalized zinc oxide nanoparticles in quest of an ameliorated sun-blocking agent: a semi-quantitative study on photo-protection, photo-stability, antioxidant and photo-catalytic properties
- Open Access
- 29 March 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (4) , 925-930
Facile Synthesis of Magnesium Oxide Nanoparticles for Effective Photocatalytic Degradation of Dyes
Significant environmental challenges require to be addressed to efficiently decompose the organic pollutants. Herein, a novel photocatalytic approach is proposed that leverages advanced nanomaterials to improve pollutant removal rates. The magnesium oxide nanoparticles were synthesized using simple chemical simultaneous precipitation method, utilizing magnesium nitrate as main precursor. The microstructural analysis of samples was investigated by XRD and SEM techniques. An absorption shifting toward the blue end of the spectrum observed in UV-VIS absorption spectrum suggests the development of MgO nanoparticles. Energy-gap energies of MgO nanoparticles were examined as function of calcination temperature and band-gap energies decreased from 5.43-5.04 eV, a change attributed to grain growth in samples. This finding aligns with the particle sizes determined from XRD and SEM. The typical sizes of the synthesized nanoparticles were ranged between 5-23 nm. The synthesized MgO nanoparticles demonstrated remarkable light-activated catalytic efficiency for the reduction of methyl orange and Victoria blue dyes under UV light exposure. Based on the results, a large number of native defects is associated with the excellent photocatalytic performance of synthesized MgO nanoparticles.
- 29 March 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (4) , 925-930
Open AccessFacile Synthesis of Magnesium Oxide Nanoparticles for Effective Photocatalytic Degradation of Dyes
Significant environmental challenges require to be addressed to efficiently decompose the organic pollutants. Herein, a novel photocatalytic approach is proposed that leverages advanced nanomaterials to improve pollutant removal rates. The magnesium oxide nanoparticles were synthesized using simple chemical simultaneous precipitation method, utilizing magnesium nitrate as main precursor. The microstructural analysis of samples was investigated by XRD and SEM techniques. An absorption shifting toward the blue end of the spectrum observed in UV-VIS absorption spectrum suggests the development of MgO nanoparticles. Energy-gap energies of MgO nanoparticles were examined as function of calcination temperature and band-gap energies decreased from 5.43-5.04 eV, a change attributed to grain growth in samples. This finding aligns with the particle sizes determined from XRD and SEM. The typical sizes of the synthesized nanoparticles were ranged between 5-23 nm. The synthesized MgO nanoparticles demonstrated remarkable light-activated catalytic efficiency for the reduction of methyl orange and Victoria blue dyes under UV light exposure. Based on the results, a large number of native defects is associated with the excellent photocatalytic performance of synthesized MgO nanoparticles.
- Open Access
- 24 August 2024
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 17 (31) , 3199-3209
RSM-CCD Modeling and Optimization for Adsorptive Removal of Rose Bengal Dye from Aqueous Medium using CeO2 Nanoflowers
Objective: The focus of the study was to synthesize cerium oxide (CeO2) nanoparticles (NPs) and use them as nano adsorbents to remove toxic Rose Bengal (RB) dye from wastewater. Methods: A simple chemical method was used to synthesize CeO2 nanostructures. The nanostructures were characterized using XRD spectra, FESEM, and UV-Vis spectroscopy. The nanoparticles are used as nano adsorbents for wastewater treatment. Here, we utilized response surface methodology-central composite design (RSM-CCD) to optimize the batch adsorption studies rather than using the usual one-variable-at-a-time approach. The parameters for our investigations were the agitation period, CeO2 NP dosage, solution pH, and initial RB dye concentration. Findings: The characterization study showed that nanoflowers of a mean particle size of 44 nm and band gap of 3.68 eV were formed. RSM-CCD methodology for optimization resulted in an agitation time of 29.36 min, an NP dose of 0.302 g/L, a solution pH of 6.96, and a starting dye concentration of 88.65 mg/L gives the highest adsorption of 88.46%. The kinetics data indicated a strong fit with the pseudo-second-order (PSO) equation, while the Freundlich isotherm model fitted the equilibrium data accurately, resulting in 187 mg/g. The thermodynamic analysis suggested that adsorption was characterized by being endothermic, spontaneous, and physical. Novelty: The unique nanoflowers were employed and removal efficiency was predicted using a 2nd-order polynomial equation in Stat-Ease Design Expert Software ver.13. The model showed an excellent match with an adjusted R2 value of 0.9736 and a projected R2 value of 0.9256. Keywords: Cerium oxide nanoparticles, Adsorption, Response surface methodology, Central composite design, Rose Bengal, Optimization
- 24 August 2024
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 17 (31) , 3199-3209
Open AccessRSM-CCD Modeling and Optimization for Adsorptive Removal of Rose Bengal Dye from Aqueous Medium using CeO2 Nanoflowers
Objective: The focus of the study was to synthesize cerium oxide (CeO2) nanoparticles (NPs) and use them as nano adsorbents to remove toxic Rose Bengal (RB) dye from wastewater. Methods: A simple chemical method was used to synthesize CeO2 nanostructures. The nanostructures were characterized using XRD spectra, FESEM, and UV-Vis spectroscopy. The nanoparticles are used as nano adsorbents for wastewater treatment. Here, we utilized response surface methodology-central composite design (RSM-CCD) to optimize the batch adsorption studies rather than using the usual one-variable-at-a-time approach. The parameters for our investigations were the agitation period, CeO2 NP dosage, solution pH, and initial RB dye concentration. Findings: The characterization study showed that nanoflowers of a mean particle size of 44 nm and band gap of 3.68 eV were formed. RSM-CCD methodology for optimization resulted in an agitation time of 29.36 min, an NP dose of 0.302 g/L, a solution pH of 6.96, and a starting dye concentration of 88.65 mg/L gives the highest adsorption of 88.46%. The kinetics data indicated a strong fit with the pseudo-second-order (PSO) equation, while the Freundlich isotherm model fitted the equilibrium data accurately, resulting in 187 mg/g. The thermodynamic analysis suggested that adsorption was characterized by being endothermic, spontaneous, and physical. Novelty: The unique nanoflowers were employed and removal efficiency was predicted using a 2nd-order polynomial equation in Stat-Ease Design Expert Software ver.13. The model showed an excellent match with an adjusted R2 value of 0.9736 and a projected R2 value of 0.9256. Keywords: Cerium oxide nanoparticles, Adsorption, Response surface methodology, Central composite design, Rose Bengal, Optimization
- Open Access
- 24 August 2024
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 17 (31) , 3190-3198
Enhancing the Degradation of All Moieties of the Environment Pollutant Congo Red Dye in Dark, White Light, and Solar Light by using CuS Nanoflowers: A Quantita tive Analysis
Objectives: To enhance the degradation rate of all moieties (azo, naphthalene, and phenyl) of Congo Red (CR) dye by using CuS nanoflowers under darkness, white light, and solar light. Method: CuS nanoflowers are synthesized by employing a simple wet chemical method. The sample is characterized by its microstructural and optical properties. The CuS nanoflower is added to the CR solution to investigate the degradation efficiency of CuS nanoflower in dark and light. Findings: The sample shows significant absorption between 300 and 700 nm, followed by a quick reduction. This study is the first to show that a CuS nanoflower can act as both a catalyst and a photocatalyst to degrade all moieties of Congo Red (CR), an environmental pollutant, in dark and light. 100% degradation of all CR dye moieties takes place in 24 min, 36 min, and 52 min in the presence of solar light, white light, and darkness, respectively. When comparing experimental settings (consecutively darkness, white light, and solar light), the change in degradation efficiency for the azo, naphthalene, and phenyl moieties with time is the highest under solar light followed by white light and darkness in order. The reactions followed pseudo-first-order kinetics according to the Langmuir-Hinshelwood (L-H) model. The degradation rate for all moieties of CR is the highest under solar light irradiation, lower under white light irradiation, and lowest in darkness. Additionally, CuS nanoflowers exhibit exceptional recyclability. Novelty: The phenyl moiety of CR is degraded 100% in dark and light. Additionally, the degradation rate of all moieties is enhanced due to the greater surface area of nanoflowers. To the best of our knowledge, the present study is the first one to report that the CuS nanoflower synthesized in this work can act as both a catalyst and a photocatalyst to degrade all moieties of Congo Red (CR), an environmental pollutant, in darkness and light. Keywords: CuS nanoflowers, Photocatalyst, Catalyst, 100% CR degradation, Rate of degradation efficiency.
- 24 August 2024
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 17 (31) , 3190-3198
Open AccessEnhancing the Degradation of All Moieties of the Environment Pollutant Congo Red Dye in Dark, White Light, and Solar Light by using CuS Nanoflowers: A Quantita tive Analysis
Objectives: To enhance the degradation rate of all moieties (azo, naphthalene, and phenyl) of Congo Red (CR) dye by using CuS nanoflowers under darkness, white light, and solar light. Method: CuS nanoflowers are synthesized by employing a simple wet chemical method. The sample is characterized by its microstructural and optical properties. The CuS nanoflower is added to the CR solution to investigate the degradation efficiency of CuS nanoflower in dark and light. Findings: The sample shows significant absorption between 300 and 700 nm, followed by a quick reduction. This study is the first to show that a CuS nanoflower can act as both a catalyst and a photocatalyst to degrade all moieties of Congo Red (CR), an environmental pollutant, in dark and light. 100% degradation of all CR dye moieties takes place in 24 min, 36 min, and 52 min in the presence of solar light, white light, and darkness, respectively. When comparing experimental settings (consecutively darkness, white light, and solar light), the change in degradation efficiency for the azo, naphthalene, and phenyl moieties with time is the highest under solar light followed by white light and darkness in order. The reactions followed pseudo-first-order kinetics according to the Langmuir-Hinshelwood (L-H) model. The degradation rate for all moieties of CR is the highest under solar light irradiation, lower under white light irradiation, and lowest in darkness. Additionally, CuS nanoflowers exhibit exceptional recyclability. Novelty: The phenyl moiety of CR is degraded 100% in dark and light. Additionally, the degradation rate of all moieties is enhanced due to the greater surface area of nanoflowers. To the best of our knowledge, the present study is the first one to report that the CuS nanoflower synthesized in this work can act as both a catalyst and a photocatalyst to degrade all moieties of Congo Red (CR), an environmental pollutant, in darkness and light. Keywords: CuS nanoflowers, Photocatalyst, Catalyst, 100% CR degradation, Rate of degradation efficiency.
- 16 May 2022
- Published by Springer Nature in Journal of Optics
- Vol. 52 (1) , 33-41
All-optical dibit-based Feynman gate using reflective semiconductor optical amplifier with frequency encoding scheme
- 16 May 2022
- Published by Springer Nature in Journal of Optics
- Vol. 52 (1) , 33-41
All-optical dibit-based Feynman gate using reflective semiconductor optical amplifier with frequency encoding scheme
- 2 June 2021
- Published by Springer Nature in Journal of Optics
- Vol. 50 (3) , 361-370
A novel design of frequency encoded multiplexer and demultiplexer systems using reflected semiconductor optical amplifier with simulative verification
- 2 June 2021
- Published by Springer Nature in Journal of Optics
- Vol. 50 (3) , 361-370
A novel design of frequency encoded multiplexer and demultiplexer systems using reflected semiconductor optical amplifier with simulative verification
- 19 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 388-392
All-Optical Frequency Encoded Dibit-based Half Adder using Reflective Semiconductor Optical Amplifier with Simulative Verification
In the modern era, high-speed signal communication and computation increase optical reliability. Therefore, optics is a powerful candidate for implementation in different logic gates, combinational circuits, devices, optical computers, etc. The design of all-optical frequency encoded dibit-based half adder is devised in this communication. Some papers focus on the advantage of the precision of dibit logic by carrying out logic operations on dibit representation technique. This devised dibit-based design operates with a high speed as well as it reduces the bit error problem by increasing the high signal-to-noise ratio. Frequency encoding is the most reliable encoding technique because of its unaltered nature in reflection, refraction, absorption when propagates in long-range. In this devised design reflected semiconductor optical amplifier is used to fulfill the purpose of optical switches. The operation of the devised design is verified through simulation using MATLAB Simulink (R2018a) software.
- 19 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 388-392
All-Optical Frequency Encoded Dibit-based Half Adder using Reflective Semiconductor Optical Amplifier with Simulative Verification
In the modern era, high-speed signal communication and computation increase optical reliability. Therefore, optics is a powerful candidate for implementation in different logic gates, combinational circuits, devices, optical computers, etc. The design of all-optical frequency encoded dibit-based half adder is devised in this communication. Some papers focus on the advantage of the precision of dibit logic by carrying out logic operations on dibit representation technique. This devised dibit-based design operates with a high speed as well as it reduces the bit error problem by increasing the high signal-to-noise ratio. Frequency encoding is the most reliable encoding technique because of its unaltered nature in reflection, refraction, absorption when propagates in long-range. In this devised design reflected semiconductor optical amplifier is used to fulfill the purpose of optical switches. The operation of the devised design is verified through simulation using MATLAB Simulink (R2018a) software.