LCLaurent Calvez

Laurent Calvez

*This is an algorithmically generated author record based on publicly available information.

Laurent Calvez has a total of 140 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reaction‐Inert Fluoride Glass Preserves K 2 SiF 6 :Mn 4+ Phosphors for High‐Brightness Laser Display Converters

    by Yulei Xie, Lingjun Zhou, Denghao Li, Zicheng Wen, Wenyan Zheng, Ruoshan Lei, Youjie Hua, Gongxun Bai, Can Li, Xiaofeng Liu, et al.

    High‐brightness laser phosphor displays require phosphor‐in‐glass (PiG) converters combining all‐inorganic robustness, high conversion efficiency, and narrowband primary emission for wide‐gamut projection. K 2 SiF 6 :Mn 4+ (KSFM) provides narrowband red emission, but its integration into PiG requires preservation of the fluorosilicate host framework and Mn–F coordination during glass embedding. Here, a reaction‐inert fluoride‐glass matrix strategy is developed for KSFM‐PiG converters. Interfacial reaction thermodynamics are used to compare oxygen‐containing glass constituents with fluoride constituents, indicating that indicates that oxygen‐containing glass chemistry drives KSF decomposition, whereas ZBLAN‐related fluoride constituents show lower reactivity toward KSF host. Based on this guideline, KSFM‐ZBLAN PiG composites are fabricated by rapid spark plasma sintering. The PiG retains 72.75% of the external quantum efficiency of the corresponding pre‐sintered KSFM/ZBLAN compact, compared with 63% reported for sapphire‐supported KSFM‐in‐glass films. Co‐embedding KSFM and β‐SiAlON:Eu 2+ enables red/green PiGs for wide‐gamut conversion. In a rotating phosphor wheel, the multicomponent PiG delivers 2612 lm at 23.58 W mm −2 , corresponding to a laser‐to‐luminous efficacy of luminous efficacy of 292.95 lm W −1 , compared with a reported value of 87 lm W −1 . These results demonstrate chemically guided fluoride‐matrix selection as a viable approach for integrating fluorosilicate phosphors into laser display converters.

  • Open Access

    Preparation and luminescence properties of Pr-doped heavy metal oxide glasses by ion implantation

    by Marian Kubliha, Petr Kostka, Roman Yatskiv, Laurent Calvez, David Le Coq, Pavol Noga, Vladimir Labaš, Ondrej Bošák

    The paper presents the procedure of Praseodymium (Pr) doping at 1000 and 2000 wt. ppm by ion implantation into 65 Sb2O3 − 25 PbCl2 − 10 LiCl and 60 PbO – 40 GaO The paper presents the procedure of Praseodymium (Pr) doping at 1000 and 2000 wt. ppm by ion implantation into 65 Sb2O3 − 25 PbCl2 − 10 LiCl and 60 PbO – 40 GaO

  • Super cold-crystallization of sodium iodine in selenium based chalco-halide glasses

    by Claire Fourmentin, Fabrice Célarié, Yann Gueguen, Louisiane Verger, Xiang-Hua Zhang, Mathieu Rozé, Yann Guimond, Laurent Calvez

  • Open Access

    New Chalcogenide Glass-Ceramics Based on Ge-Zn-Se for IR Applications

    by Alin Velea, Florinel Sava, Petre Badica, Mihail Burdusel, Claudia Mihai, Aurelian-Catalin Galca, Elena Matei, Angel-Theodor Buruiana, Outman El Khouja, Laurent Calvez

    The consumer market requests infrared (IR) optical components, made of relatively abundant and environmentally friendly materials, to be integrated or attached to smartphones. For this purpose, three new chalcogenides samples, namely Ge23.3Zn30.0Se46.7 (d_GZSe-1), Ge26.7Zn20.0Se53.3 (d_GZSe-2) and Ba4.0Ge12.0Zn17.0Se59.0I8.0 (d_GZSe-3) were obtained by mechanical alloying and processed by spark plasma sintering into dense bulk disks. Obtaining a completely amorphous and homogeneous material proved to be difficult. d_GZSe-2 and d_GZSe-3 are glass-ceramics with the amount of the amorphous phase being 19.7 and 51.4 wt. %, while d_GZSe-1 is fully polycrystalline. Doping with barium and iodine preserves the amorphous phase formed by milling and lowers the sintering temperature from 350 °C to 200 °C. The main crystalline phase in all of the prepared samples is cubic ZnSe or cubic Zn0.5Ge0.25Se, while in d_GZSe-3 the amorphous phase contains GeSe4 clusters. The color of the first two sintered samples is black (the band gap values are 0.42 and 0.79 eV), while d_GZSe-3 is red (Eg is 1.37 eV) and is transparent in IR domain. These results are promising for future research in IR materials and thin films.


  • Open Access

    Femtosecond Laser Direct Writing of Gradient Index Fresnel Lens in GeS2-Based Chalcogenide Glass for Imaging Applications

    by Pierre Delullier, Guillaume Druart, Florence De La Barrière, Laurent Calvez, Matthieu Lancry

    Chalcogenide glasses have attracted growing interest for their potential to meet the demands of photonic applications in the Mid-Wavelength InfraRed (MWIR) and Long-Wavelength InfraRed (LWIR) transmission windows. In this work, we investigated the photosensitivity to femtosecond laser irradiation of a dedicated chalcogenide glass, along with its possible applications in micro-optics. In order to address the SWaP problem (Size, Weight and Power), this work took advantage of recent techniques in femtosecond laser direct writing to imprint flat and integrated optical systems. Here, we wanted to simplify an infrared multispectral imaging system which combines a lens array and a filter array. Each channel has a focal length of 7 mm and an f-number of 4. We show in this paper that the chosen GeS2-based chalcogenide glass is very promising for the fabrication of graded index optics by fs-laser writing, and particularly for the fabrication of Fresnel lenses. We note a very important phase variation capacity in this infrared material corresponding to refractive index variations up to +0.055. A prototype of Fresnel GRIN lens with a refractive index gradient was fabricated and optically characterized in the Vis range.


  • Open Access

    IR GRIN lenses prepared by ionic exchange in chalcohalide glasses

    by Claire Fourmentin, Xiang-Hua Zhang, Enora Lavanant, Thierry Pain, Mathieu Rozé, Yann Guimond, Francis Gouttefangeas, Laurent Calvez

    In order to decrease the number of lenses and the weight of thermal imaging devices, specific optical design are required by using gradient refractive index (GRIN) elements transparent in the infrared waveband. While widely used for making visible GRIN lenses with silicate glasses, the ion exchange process is very limited when applied to chalcogenide glasses due to their low Tg and relatively weak mechanical properties. In this paper, we develop chalco-halide glasses based on alkali halide (NaI) addition in a highly covalent GeSe2–Ga2Se3 matrix, efficient for tailoring a significant and permanent change of refractive by ion exchange process between K+ and Na+. Optical and structural properties of the glass samples were measured showing a diffusion length reaching more than 2 mm and a Gaussian gradient of refractive index Δn of 4.5.10–2. The obtained GRIN lenses maintain an excellent transmission in the second (3–5 µm) and third (8–12 µm) atmospheric windows.


  • Open Access

    High refractive index IR lenses based on chalcogenide glasses molded by spark plasma sintering

    by Valentin Reux, Laurent Calvez, Sébastien Billon, Antoine Gautier, Hongli Ma, Patrick Houizot, Frédéric Charpentier, Hugues Tariel, Zhiyong Yang, Anping Yang, et al.

    In this work, spark plasma sintering is used to mold non conventional chalcogenide glasses of high refractive index at low temperature (25Se10Te65 glass composition were investigated showing a refractive index of 3,12@10 µm and with however a limited resistance to crystallization. Mechanical milling of raw Ge, Se, Te elements leads to a major amorphous phase with the formation of a small proportion of GeTe crystals. Remaining GeTe crystals induce a fast crystallization rate during the sintering process leading to the opacity of the material. SPS flash moldings were then performed using melt quenched glass powders to produce complex lenses. It has been found that the critical parameter to reach optimal IR transparency is mainly the powder granulometry, which should be superior to 100 µm to prevent from MIE scatterings. The possibility of producing high refractive index infrared lenses has been demonstrated even with unstable glasses against crystallization.


  • Open Access

    Investigation on Chalcogenide Glass Additive Manufacturing for Shaping Mid-infrared Optical Components and Microstructured Optical Fibers

    by Julie Carcreff, François Cheviré, Ronan Lebullenger, Antoine Gautier, Radwan Chahal, Jean Luc Adam, Laurent Calvez, Laurent Brilland, Elodie Galdo, David Le Coq, et al.

    In this work, an original way of shaping chalcogenide optical components has been investigated. Thorough evaluation of the properties of chalcogenide glasses before and after 3D printing has been carried out in order to determine the impact of the 3D additive manufacturing process on the material. In order to evaluate the potential of such additive glass manufacturing, several preliminary results obtained with various chalcogenide objects and components, such as cylinders, beads, drawing preforms and sensors, are described and discussed. This innovative 3D printing method opens the way for many applications involving chalcogenide fiber elaboration, but also many other chalcogenide glass optical devices.


  • Specific trends in phosphate glass crystallization

    by J. Rocherullé, Muzhi Cai, P. Bénard-Rocherullé, R. Lebullenger, L. Calvez, J. Trolès, D. Le Coq, X-H Zhang, J. Massera, L. Petit