Alessio Pipinato
Research Subjects
Research Interests
Alessio Pipinato has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Claudio Modena
University of Padova
17 shared publications Carlo Pellegrino
Assistant Professor, Department of Civil and Environmental Engineering, University of Padua, Padua, Italy
7 shared publicationsC. Pellegrino
Department of Structural and Transportation Engineering , University of Padova , Italy
5 shared publicationsC Pellegrino
3 shared publications- Carlo Pellegrino
University of Padova
2 shared publications Claudio Modena
Department of Structural and Transportation Engineering, University of Padova, Via Marzolo 9, 35131 Padova, Italy
2 shared publications
Latest Publications
- 25 September 2019
- Published by Taylor & Francis in Structural Engineering International
- Vol. 29 (4) , 507-518
Prolonging the Lifetime of Old Steel and Steel–Concrete Bridges: Assessment Procedures and Retrofitting Interventions
The structural analysis of existing bridges is not widely covered by the various codes and standards, resulting in the insecure and, in some cases, critical condition of this type of structure. Regarding national regulation, few states include compulsory codes that define the methods and procedures of inspection, assessment, maintenance and retrofitting of bridges. Although an accurate retrofitting procedure can prolong the life of an existing bridge, the more accurate management of national infrastructure assets can result in financial savings in the long term. This article deals with: (a) the assessment step-level procedure, (b) suggestions for bridge load tests and bridge categories, (c) bridge material analysis, (d) structural testing analysis, and (e) the main retrofitting interventions to prolong the life of existing steel and steel composite bridges. Furthermore, a representative case study is analysed and discussed, including examples of the retrofitting solutions implemented to prolong the service life of the bridge.
- 25 September 2019
- Published by Taylor & Francis in Structural Engineering International
- Vol. 29 (4) , 507-518
Prolonging the Lifetime of Old Steel and Steel–Concrete Bridges: Assessment Procedures and Retrofitting Interventions
The structural analysis of existing bridges is not widely covered by the various codes and standards, resulting in the insecure and, in some cases, critical condition of this type of structure. Regarding national regulation, few states include compulsory codes that define the methods and procedures of inspection, assessment, maintenance and retrofitting of bridges. Although an accurate retrofitting procedure can prolong the life of an existing bridge, the more accurate management of national infrastructure assets can result in financial savings in the long term. This article deals with: (a) the assessment step-level procedure, (b) suggestions for bridge load tests and bridge categories, (c) bridge material analysis, (d) structural testing analysis, and (e) the main retrofitting interventions to prolong the life of existing steel and steel composite bridges. Furthermore, a representative case study is analysed and discussed, including examples of the retrofitting solutions implemented to prolong the service life of the bridge.
- 19 June 2019
- Published by Taylor & Francis in Structural Engineering International
- Vol. 30 (1) , 109-118
Assessment Procedure and Rehabilitation Criteria for Riveted Road Bridges
Traffic patterns increasing and the degradation of existing roadway steel bridges due to poor maintenance has led to the need of an assessment deciding whether to retrofit or to supply a structure replacement. This paper focusses on the rehabilitation of steel truss bridges in order to extend the lifetime of such bridges. Two case studies are presented: the Adige Bridge, located between the provinces of Padua and Rovigo, and the Po Bridge, which connects the Rovigo and Ferrara provinces in northern Italy. In both cases, stress data and displacements are obtained by a 3D finite element model and the results show that loads defined in the European code are enough to compromise material strength in several sections. Appropriate retrofitting criteria are proposed and compared. A multi-criteria decision approach is introduced at the end of the paper to help in the decision-making process of selecting the best option for an additional reinforcement strategy, taking into account four criteria: reliability of the solution, ease of construction, estimated cost and embodied carbon.
- 19 June 2019
- Published by Taylor & Francis in Structural Engineering International
- Vol. 30 (1) , 109-118
Assessment Procedure and Rehabilitation Criteria for Riveted Road Bridges
Traffic patterns increasing and the degradation of existing roadway steel bridges due to poor maintenance has led to the need of an assessment deciding whether to retrofit or to supply a structure replacement. This paper focusses on the rehabilitation of steel truss bridges in order to extend the lifetime of such bridges. Two case studies are presented: the Adige Bridge, located between the provinces of Padua and Rovigo, and the Po Bridge, which connects the Rovigo and Ferrara provinces in northern Italy. In both cases, stress data and displacements are obtained by a 3D finite element model and the results show that loads defined in the European code are enough to compromise material strength in several sections. Appropriate retrofitting criteria are proposed and compared. A multi-criteria decision approach is introduced at the end of the paper to help in the decision-making process of selecting the best option for an additional reinforcement strategy, taking into account four criteria: reliability of the solution, ease of construction, estimated cost and embodied carbon.
- Open Access
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Extending the Fatigue Life of Steel Truss Bridges with Tuned Mass Damper Systems
The increasing traffic demand is continuously growing worldwide. Therefore, the life of a large stock of bridges that still exist throughout the world must be extended, ensuring at the same time that safety is not compromised for economic reason. This paper introduces the possibility to control the fatigue life of existing bridges by using a vibration control system. Based on a dynamic optimization analysis, the stresses from traffic on the bridge are obtained. Subsequently, a plate finite element (FE) model of the whole bridge is developed. The equation of motion is presented for a case study bridge, equipped with different tuned mass damper system, and the combination of external loads and train/track interaction with or without the TMD system is developed through own‐developed routines and FEM software. The procedure is showcased for a case study bridge. After gaining the stress states at the critical hotspot, the fatigue crack life is evaluated by using the linear cumulative damage theory. The different TMD solution presented is demonstrated to be able to diminish the stress level in critical hotspots, improving the overall fatigue life of the bridge over an established lifetime.
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Open AccessExtending the Fatigue Life of Steel Truss Bridges with Tuned Mass Damper Systems
The increasing traffic demand is continuously growing worldwide. Therefore, the life of a large stock of bridges that still exist throughout the world must be extended, ensuring at the same time that safety is not compromised for economic reason. This paper introduces the possibility to control the fatigue life of existing bridges by using a vibration control system. Based on a dynamic optimization analysis, the stresses from traffic on the bridge are obtained. Subsequently, a plate finite element (FE) model of the whole bridge is developed. The equation of motion is presented for a case study bridge, equipped with different tuned mass damper system, and the combination of external loads and train/track interaction with or without the TMD system is developed through own‐developed routines and FEM software. The procedure is showcased for a case study bridge. After gaining the stress states at the critical hotspot, the fatigue crack life is evaluated by using the linear cumulative damage theory. The different TMD solution presented is demonstrated to be able to diminish the stress level in critical hotspots, improving the overall fatigue life of the bridge over an established lifetime.
- 2 June 2018
- Published by Springer Nature in Natural Hazards
- Vol. 119 (3) , 2197-2233
Recent northeast Italian tornado events: lesson learned for improving structures
- 2 June 2018
- Published by Springer Nature in Natural Hazards
- Vol. 119 (3) , 2197-2233
Recent northeast Italian tornado events: lesson learned for improving structures
- 23 April 2018
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 14 (12) , 1611-1627
Extending the lifetime of steel truss bridges by cost-efficient strengthening interventions
The large number of existing bridges and viaducts all around the country has become a major problem for bridge owners. In the specific case of steel truss bridges, a reasonable method to extend the lifetime of existing structures is represented by the introduction of new deck systems combined with diffused strengthening interventions. In this study, a stepwise approach considering different loading conditions is presented (historical and Eurocode loads). The structural analysis has been performed on a case study bridge with a finite element model (FEM) calibrated on load tests. It was found that the predicted deformation agreed reasonably with the experimental results. Different strengthening alternatives were analysed and discussed: the introduction of orthotropic deck; the construction of composite deck with differentiating thickness and ordinary concrete strength; the construction of composite deck with differentiating thickness and high concrete strength; in some cases, also steel-to-steel interventions on the bridge are provided. It has been found that the best structural strengthening alternative lies in the construction of a composite concrete or of an ultra high-performance concrete (UHPC) or an ultra high-performance fibre-reinforced concrete (UHPFRC) deck with a reduced thickness (compared with traditional interventions) resting on the existing steel structure combined with steel-to-steel interventions.
- 23 April 2018
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 14 (12) , 1611-1627
Extending the lifetime of steel truss bridges by cost-efficient strengthening interventions
The large number of existing bridges and viaducts all around the country has become a major problem for bridge owners. In the specific case of steel truss bridges, a reasonable method to extend the lifetime of existing structures is represented by the introduction of new deck systems combined with diffused strengthening interventions. In this study, a stepwise approach considering different loading conditions is presented (historical and Eurocode loads). The structural analysis has been performed on a case study bridge with a finite element model (FEM) calibrated on load tests. It was found that the predicted deformation agreed reasonably with the experimental results. Different strengthening alternatives were analysed and discussed: the introduction of orthotropic deck; the construction of composite deck with differentiating thickness and ordinary concrete strength; the construction of composite deck with differentiating thickness and high concrete strength; in some cases, also steel-to-steel interventions on the bridge are provided. It has been found that the best structural strengthening alternative lies in the construction of a composite concrete or of an ultra high-performance concrete (UHPC) or an ultra high-performance fibre-reinforced concrete (UHPFRC) deck with a reduced thickness (compared with traditional interventions) resting on the existing steel structure combined with steel-to-steel interventions.
- Open Access
- 2 January 2018
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 12 (2) , 36
Structural Optimization of Network Arch Bridges with Hollow Tubular Arches and Chords
In the framework of bridge engineering, cable structure represent a key argument. The development of innovative bridge solutions are needed in order to keep time and costs at a reasonable level, maintaining at the same time an high level of structural safety and functionality. The network arch bridge solution completely respond to these requirements, and in addition could be designed as a very pleasant and formally elegant structure, because of its slenderness and lightness. In this paper, an introduction on the network arch solution is presented, together with structural analysis and data of relevant structures realized. Furthermore, an optimization of specific types of road and railway bridges is presented in the particular case of hollow sections, considering three alternative of cable disposition.
- 2 January 2018
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 12 (2) , 36
Open AccessStructural Optimization of Network Arch Bridges with Hollow Tubular Arches and Chords
In the framework of bridge engineering, cable structure represent a key argument. The development of innovative bridge solutions are needed in order to keep time and costs at a reasonable level, maintaining at the same time an high level of structural safety and functionality. The network arch bridge solution completely respond to these requirements, and in addition could be designed as a very pleasant and formally elegant structure, because of its slenderness and lightness. In this paper, an introduction on the network arch solution is presented, together with structural analysis and data of relevant structures realized. Furthermore, an optimization of specific types of road and railway bridges is presented in the particular case of hollow sections, considering three alternative of cable disposition.
- 1 March 2016
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 169 (1) , 54-66
Structural analysis and design of a multispan network arch bridge
This paper presents a study of a typical 1·1 km bridge in the north of Italy against a background of new infrastructure development. The bridge is composed of five network steel arches. The design solution represents a lightweight alternative if compared to traditional arch bridges. Every network arch spans 130 m, is 17 m wide and has a maximum height of 25·5 m. The deck is a steel–concrete composite section resting on precast slabs. Hangers have a variable inclination according to the geometric optimisation analysis performed. Before the final structural design, parametric studies were developed in order to optimise the material grade, the structural shape and the structural detailing.
- 1 March 2016
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 169 (1) , 54-66
Structural analysis and design of a multispan network arch bridge
This paper presents a study of a typical 1·1 km bridge in the north of Italy against a background of new infrastructure development. The bridge is composed of five network steel arches. The design solution represents a lightweight alternative if compared to traditional arch bridges. Every network arch spans 130 m, is 17 m wide and has a maximum height of 25·5 m. The deck is a steel–concrete composite section resting on precast slabs. Hangers have a variable inclination according to the geometric optimisation analysis performed. Before the final structural design, parametric studies were developed in order to optimise the material grade, the structural shape and the structural detailing.
- 1 January 2016
- Published by Elsevier
- p. 299-331
Masonry bridges