ABAlaa Ali Bashandy

Alaa Ali Bashandy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alaa Ali Bashandy has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of bacteria and fibers on the mechanical and structural behavior of self-healing fibrous concrete

    by Mina Medhat Youssef, Alaa Ali Bashandy, Rateb Nabil Abbas, Amal Abdel Hady Nasser

    The incorporation of bacteria into concrete has emerged as a promising strategy to enhance mechanical performance. This study presents a comprehensive experimental and numerical investigation into the behavior of fibrous concrete incorporating two bacterial strains—Bacillus megaterium (BM) and W1 at a dosage of 0.25% of cement weight, combined with either steel or polypropylene fibers. A multiscale experimental program was carried out, including compressive, tensile, and flexural tests, along with structural slab evaluation and analytical validation. Results revealed significant strength enhancements due to the steel fiber–BM combination, with compressive strength improvements of 42%, 52%, and 31% at 7, 28, and 90 days, respectively, compared to the control. Using polypropylene fiber–W1 mixes, recorded tensile strength gains reached nearly 19%. Flexural strength increased by up to 30% in 90 days, confirming the synergistic effect of fiber crack-bridging and bacterial precipitation. Structural performance was further assessed through four-point bending tests on reinforced slabs (1.0 m × 0.5 m × 0.05 m), where bacterial–fibrous concretes exhibited superior ductility and load capacity compared to the control. Reinforcing with steel plates proved more effective than glass fiber laminates, achieving 15–17% higher ultimate loads. A finite element model developed in Abaqus/CAE using the Concrete Damaged Plasticity model accurately replicated the experimental load–deflection responses, validating the proposed approach. Overall, the results demonstrate that integrating bacteria with fibers and external reinforcement can substantially enhance both material- and structural-scale performance, highlighting its potential for durable, high-performance concrete applications. These findings underline the potential of fibrous concrete as a sustainable, durable, and cost-effective solution for future structural applications.


  • Recycled Aggregate Self-Curing Concrete Under Elevated Temperatures

    by Alaa Bashandy, Noha Mohammed Soliman, Mohamed Ibrahim El-Nemr

    Self-curing concrete is one of the important new types of concrete due to the scarcity of water especially, in the desert areas. Recycling waste demolitions as coarse aggregates for concrete is one of the recent solutions to reduce its bad impact on the environment. In this research, the both types will be combining. This research aims to investigate the behavior of recycled aggregate self-curing concrete under elevated temperatures. The main variables are; aggregate types (recycled vs natural), elevated temperatures (200oC, 400oC, and 600oC), cooling methods (in the air or by using water), and storage time after cooling (for 1 or 28 days). Results are driven in terms of compressive, splitting tensile, flexure, and bond strengths. Test results showed that the recycled aggregate self-curing concrete can be used under elevated temperature considering a strength loss. The use of self-curing and recycled aggregate self-curing concrete may be considered as an alternative solution to the use of conventional curing concrete for infrastructures. Using crushed ceramics as a coarse aggregate at elevated temperature is efficient. The use of recycled aggregate self-curing concrete may consider as an alternative solution to the use of conventionally cured concrete in infrastructures. Firefighting is not recommended by using water due to its bad effects after cooling.


  • Open Access

    Effect of crumbed rubber Treatment method on the Flexural Behavior of High Strength Rubberized Concrete Slabs

    by A A Bashandy, F M Eid, M A Mazyad, M A Arab

    The most important research trends that the world is currently interested in are those that have a positive impact on the environment. The burning of the waste tyres is one of the most used means to get rid of these tyres, which causes a lot of gases to the air. The use of crumbed tyre rubber in concrete is considered one of the methods with a positive environmental impact. Using crumbed rubber as a partial replacement material of concrete aggregate is found to possess many engineering applications and holds promise within the future. Replacing 5% of the sand volume by crumbed tyre rubber was used. Flexural behaviour of treated and untreated rubberized concrete slabs was investigated. Experimental program shows that the behaviour of the high strength rubberized concrete slabs can be improved by the used treatment methods. Beside that the coarser of the rubber particles, the more negative effect on the behaviour of the high strength rubberized concrete slabs.


  • Effect of self-curing admixture on concrete properties in hot climate conditions

    by Joseph P. Rizzuto, Mounir Kamal, Hanaa Elsayad, Alaa Bashandy, Zeinab Etman, Mohamed N. Aboel Roos, Ibrahim G. Shaaban


  • Investigation of Using Nano-silica, Silica Fume and Fly Ash in High Strength Concrete

    by Mohamed Ashraf Fahmy, Mohamed Mahmoud Abu El-Hassan, Gamal Mohamed Kamh, Alaa A. Bashandy

    Various challenges encountered in the construction industry have led to the production of concrete, with not just high strength, but also with enhanced durability properties. This study investigates the performance and durability of hardened high strength concrete cast using Nano-silica, silica fume and fly ash. Experiments were conducted by substituting cement by weight with Nano-silica, silica fume or fly ash with ratios of 5 %, 10% and 15% and compared to a control mix. The durability performance of the high strength concrete, in terms of water permeability, sulfates resistance, chloride resistance and freeze-thawing tests were tested. This study generally proposes a sustainable solution to produce durable concrete that could have useful application in the construction industry. Based on the results obtained, the hardened properties of concrete improved depending on the type of supplementary cementious materials. Test results showed that Nano-silica has a great influence on concrete properties, but the high dosage show a reverse result.


  • Behavior improvement of self-compacting concrete in hot weather

    by Mounir M. Kamal, Zeinab A. Etman, Alaa A. Bashandy, Mohammed Nagy

    The main aim of this research is studying the effect of hot weather on the properties of self-compacting concrete and conventional concrete in both fresh and hardened state. Also, this research extends to improve the behavior of self-compacting concrete in hot weather. The main parameters were surrounding weather temperature (5°C, 20°C and 35°C), concrete materials temperatures’ (25°C, 50°C), curing temperatures (25°C and 50°C) and admixtures (using a retarder). Two stages were carried out to achieve the research aim. The behavior of self-compacting concrete compared to conventional concrete was evaluated in the first stage. Based on the first stage, attempts to enhance the concrete properties were evaluated in the second stage. Precautions on mixing and placing concrete in these climates are considered. Results are a drive in terms of; workability tests, compressive strength, splitting tensile strength, and flexural strength. Test results showed that self-compacting concrete behavior and strengths were better than conventional concrete. Slump test, J-ring and V-funnel test were used to evaluate the fresh properties of the self-compacting concrete. Drying shrinkage of self-compacting concrete in hot weather were also evaluated.


  • Open Access

    Recycled Aggregate Self-curing High-strength Concrete

    by Alaa Ali Bashandy, Noha M. Soliman, Mahmoud Hamdy Abd Elrahman

    The use of recycled aggregates from demolished constructions as coarse aggregates for concrete becomes a need to reduce the negative effects on the environment. Internal curing is a technique that can be used to provide additional moisture in concrete for more effective hydration of cement to reduce the water evaporation from concrete, increase the water retention capacity of concrete compared to the conventionally cured concrete. High strength concrete as a special concrete type has a high strength with extra properties compared to conventional concrete. In this research, the combination of previous three concrete types to obtain self-curing high-strength concrete cast using coarse recycled aggregates is studied. The effect of varying water reducer admixture and curing agent dosages on both the fresh and hardened concrete properties is studied. The fresh properties are discussed in terms of slump values. The hardened concrete properties are discussed in terms of compressive, splitting tensile, flexure and bond strengths. The obtained results show that, the using of water reducer admixture enhances the main fresh and hardened properties of self-curing high-strength concrete cast using recycled aggregate. Also, using the suggested chemical curing agent increased the strength compared to conventional concrete without curing.


  • Comparative study on the using of PEG and PAM as curing agents for self-curing concrete

    by Alaa A. Bashandy, Nageh N. Meleka, Mohamed M. Hamad

    There are many factors, which may affect on concrete quality. One of those is concrete curing. Self-curing concrete is the solution. It may produce by using chemical curing agents. The concept of those agents is to reduce the water evaporation from concrete. This research aims to study the effect of chemical curing agents on the behavior of self-curing concrete. Two different chemical curing agents were used to study the main mechanical properties of concrete. The main variables are; the type of curing agent (Polyethylene glycol "PEG400"–Poly Acrylamide "PAM") and its dosages. The results obtained in terms of compressive, tensile and flexure strength values. Test results showed that the self-curing concrete cured by each agent performed better in hardened properties compared to none cured concrete. Also, curing using the both agents together perform better than using each one individually.


  • Repair and strengthening of timber cantilever beams

    by Alaa A. Bashandy, Alaa E. El-Habashi, Ahmed K. Dewedar

    This research aims to study the feasibility of repair and strengthening of timber cantilever beams used in historic buildings. It is conducted to investigate the feasibility of using different valid materials and techniques to repair and strengthen timber cantilever beams in new and historic timber buildings. The study is performed in terms of structural performance as well as historic and architectural values. An experimental program of several different materials and techniques is executed. The results are driven in terms of initial cracking load, crack propagation for the tested samples at different loading stages, deflection values, and failure load for each repaired or strengthened material and technique. The main variables are timber types (new and historic), repair and strengthening materials (steel plates, Glass Fiber Reinforced Polymer wrap, and Carbon Fiber Reinforced Polymer laminates), repair or strengthening techniques (near surface mounted and externally bonded system), and cantilever length (1000 and 1250 mm). Test results indicated that using steel plates, glass fiber wrap, and carbon fiber laminates increases the value of failure loads and decreases the deflection at both; repaired and strengthened timber cantilever beams compared to control beams.