Lihua Ye
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lihua Ye has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Yiping Cui
Advanced Photonics Center School of Electronic Science and Engineering Southeast University Nanjing 210096 P.R. China
5 shared publicationsZiang Zhang
5 shared publicationsDapeng Yan
3 shared publicationsMing Chen
3 shared publicationsQing Zhao
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University, Nanjing, China
3 shared publicationsShaoqiang Hong
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University, Nanjing, China
3 shared publications
Latest Publications
- 16 November 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 205
Optimization of fiber laser output by suppressing stimulated Raman scattering in circular mode-scrambling fiber
- 16 November 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 205
Optimization of fiber laser output by suppressing stimulated Raman scattering in circular mode-scrambling fiber
- Open Access
- 6 July 2026
- Published by Elsevier in SSRN Electronic Journal
Optimization of fiber laser output due to Stimulated Raman Scattering suppressing in circular modified fiber
The Stimulated Raman Scattering (SRS) suppression of high power fiber laser with Circular Modified Fiber (CMF) is investigated in this paper. Four low refractive index rods are embedded in the inner cladding to overcome the disadvantage of helical light not intersecting the doped core in a circular fiber. As a result, the pump absorption coefficient enhances greatly by ~50%. Comparative experiments are conducted both the CMF and the commercial Ytterbium-Doped Fiber (YDF) across various fiber lengths. The SRS threshold rises when shortening either the active fiber or the passive fiber length. More significantly, with the passive fiber length of 5 m and the same active fiber length, the SRS threshold of the CMF system increases by an average of 86 W relative to the YDF system. The SRS threshold of the CMF system enhances by an average of 442 W with similar total pump absorption. The plausible explanation lies in the interaction between the Inter-Modal Four-Wave Mixing (IMFWM) effect and the SRS effect in the CMF system. Specifically, the SRS effect is suppressed when the IMFWM effect emerges. Further reducing the fiber bending diameter suppresses the IMFWM effect, the SRS threshold deteriorates unexpectedly at the same time. With the optimized fiber length, the 20/400 μm fiber delivers the output power of 2316 W with the signal to noise ratio (SNR) of 29.7 dB. The meaningful mitigation of SRS by novel fibers in this work offers insights into the scientific development and industrial application of high power fiber lasers.
- 6 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOptimization of fiber laser output due to Stimulated Raman Scattering suppressing in circular modified fiber
The Stimulated Raman Scattering (SRS) suppression of high power fiber laser with Circular Modified Fiber (CMF) is investigated in this paper. Four low refractive index rods are embedded in the inner cladding to overcome the disadvantage of helical light not intersecting the doped core in a circular fiber. As a result, the pump absorption coefficient enhances greatly by ~50%. Comparative experiments are conducted both the CMF and the commercial Ytterbium-Doped Fiber (YDF) across various fiber lengths. The SRS threshold rises when shortening either the active fiber or the passive fiber length. More significantly, with the passive fiber length of 5 m and the same active fiber length, the SRS threshold of the CMF system increases by an average of 86 W relative to the YDF system. The SRS threshold of the CMF system enhances by an average of 442 W with similar total pump absorption. The plausible explanation lies in the interaction between the Inter-Modal Four-Wave Mixing (IMFWM) effect and the SRS effect in the CMF system. Specifically, the SRS effect is suppressed when the IMFWM effect emerges. Further reducing the fiber bending diameter suppresses the IMFWM effect, the SRS threshold deteriorates unexpectedly at the same time. With the optimized fiber length, the 20/400 μm fiber delivers the output power of 2316 W with the signal to noise ratio (SNR) of 29.7 dB. The meaningful mitigation of SRS by novel fibers in this work offers insights into the scientific development and industrial application of high power fiber lasers.
- Open Access
- 27 June 2026
- Published by Elsevier in SSRN Electronic Journal
Influence of fiber Bragg grating bandwidth on the SRS threshold in Circular Mode-scrambling Fiber lasers
Power scaling based on commercial ytterbium-doped fiber (YDF) is limited by nonlinear effects, especially stimulated Raman scattering (SRS), in broadband high power fiber lasers. In this work, the SRS threshold on the bandwidths of fiber Bragg gratings (FBGs) is investigated in the Circular Mode-scrambling Fiber (CMF) system. As the bandwidths of FBG increase, the SRS threshold rises in the CMF system. What’s more, compared with the YDF system of the same total pump absorption, the CMF system exhibits better performance in SRS suppression even though the Inter-Modal Four-Wave Mixing (IMFWM) effect emerges. Specially, with the passive fiber length of 12 m and the same FBG bandwidths, the SRS threshold of the CMF system increases by an average of 402 W relative to the YDF system. SRS threshold of the CMF system with narrow FBG bandwidths is 241 W (from 1888 W to 2129 W) higher than that of the YDF system with wide bandwidths. When the passive fiber length is shortened to 5 m, both the IMFWM and SRS are suppressed in the CMF system. After the optimization of FBG bandwidths, the 2342 W SRS threshold of the CMF system is achieved with O-O efficiency of 74.6%. Overall, this work provide a reference for the application of novel active fibers in high power fiber lasers.
- 27 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInfluence of fiber Bragg grating bandwidth on the SRS threshold in Circular Mode-scrambling Fiber lasers
Power scaling based on commercial ytterbium-doped fiber (YDF) is limited by nonlinear effects, especially stimulated Raman scattering (SRS), in broadband high power fiber lasers. In this work, the SRS threshold on the bandwidths of fiber Bragg gratings (FBGs) is investigated in the Circular Mode-scrambling Fiber (CMF) system. As the bandwidths of FBG increase, the SRS threshold rises in the CMF system. What’s more, compared with the YDF system of the same total pump absorption, the CMF system exhibits better performance in SRS suppression even though the Inter-Modal Four-Wave Mixing (IMFWM) effect emerges. Specially, with the passive fiber length of 12 m and the same FBG bandwidths, the SRS threshold of the CMF system increases by an average of 402 W relative to the YDF system. SRS threshold of the CMF system with narrow FBG bandwidths is 241 W (from 1888 W to 2129 W) higher than that of the YDF system with wide bandwidths. When the passive fiber length is shortened to 5 m, both the IMFWM and SRS are suppressed in the CMF system. After the optimization of FBG bandwidths, the 2342 W SRS threshold of the CMF system is achieved with O-O efficiency of 74.6%. Overall, this work provide a reference for the application of novel active fibers in high power fiber lasers.
- 7 January 2025
- Published by Springer Nature in Plasmonics
- p. 1-9
Enhanced Random Lasing from Perovskite Quantum Dot with PMMA and LSPR of Ag Nanoislands
- 7 January 2025
- Published by Springer Nature in Plasmonics
- p. 1-9
Enhanced Random Lasing from Perovskite Quantum Dot with PMMA and LSPR of Ag Nanoislands
- 22 November 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 89
Interlayer air-hole photonic crystal fiber with flat dispersion and three zero dispersion wavelengths for supercontinuum generation
- 22 November 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 89
Interlayer air-hole photonic crystal fiber with flat dispersion and three zero dispersion wavelengths for supercontinuum generation
- 16 October 2024
- Published by Elsevier in Journal of Luminescence
- Vol. 277
Stable random laser of perovskite quantum dots based on SiO2-QDs-SiO2 composite nanostructure
- 16 October 2024
- Published by Elsevier in Journal of Luminescence
- Vol. 277
Stable random laser of perovskite quantum dots based on SiO2-QDs-SiO2 composite nanostructure
- 4 October 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (50) , 505707
Coherent random fiber laser emission from CdSe/ZnS quantum dots
We experimentally demonstrate the coherent random laser emission by combining CdSe/ZnS colloidal quantum dots with hollow optical fiber. Through the localized surface plasmon resonance induced by Ag nanoparticles (NPs), well-distinguished discrete spikes are observed from the Ag modified hollow fiber loaded with CdSe/ZnS QDs solution. In addition, coherent random laser action with low threshold is also realized in the hollow optical fiber filled with high packing-density CdSe/ZnS QDs even if the Ag NPs is not introduced. The self-assembled clusters of CdSe/ZnS QDs serve as the optical gain media as well as the strong scattering centers. The angle measurement experiments show that the directional emission of random laser can be adjusted by using different pumping manners. This facile, inexpensive, low pump threshold random laser could be widely used in photonic devices and display imaging.
- 4 October 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (50) , 505707
Coherent random fiber laser emission from CdSe/ZnS quantum dots
We experimentally demonstrate the coherent random laser emission by combining CdSe/ZnS colloidal quantum dots with hollow optical fiber. Through the localized surface plasmon resonance induced by Ag nanoparticles (NPs), well-distinguished discrete spikes are observed from the Ag modified hollow fiber loaded with CdSe/ZnS QDs solution. In addition, coherent random laser action with low threshold is also realized in the hollow optical fiber filled with high packing-density CdSe/ZnS QDs even if the Ag NPs is not introduced. The self-assembled clusters of CdSe/ZnS QDs serve as the optical gain media as well as the strong scattering centers. The angle measurement experiments show that the directional emission of random laser can be adjusted by using different pumping manners. This facile, inexpensive, low pump threshold random laser could be widely used in photonic devices and display imaging.
- Open Access
- 27 November 2017
- Published by Wiley in Nanophotonics
- Vol. 7 (2) , 473-478
The controllable intensity and polarization degree of random laser from sheared dye‐doped polymer‐dispersed liquid crystal
The random laser from sheared dye‐doped polymer‐dispersed liquid crystal (DDPDLC) is investigated. As the emission intensity weakens, the threshold of random laser from DDPDLC increases from 2.0 mJ/pulse to 4.0 mJ/pulse, and the degree of polarization (DOP) increases from 0.1 to 0.78, obviously when the shear distance increases from 0 mm to 4 mm. As the liquid crystal droplets are gradually oriented in the shear direction caused by alignment direction of polymer chain and anisotropy of droplet shape, the scattering intensity perpendicular to the shear direction gradually decreases and that parallel to the shear direction gradually increases. The anisotropic absorption of the laser dye also plays a certain role as the shear distance is 0 mm. The controllable intensity and polarization degree of random laser have a huge potential for sensing applications.
- 27 November 2017
- Published by Wiley in Nanophotonics
- Vol. 7 (2) , 473-478
Open AccessThe controllable intensity and polarization degree of random laser from sheared dye‐doped polymer‐dispersed liquid crystal
The random laser from sheared dye‐doped polymer‐dispersed liquid crystal (DDPDLC) is investigated. As the emission intensity weakens, the threshold of random laser from DDPDLC increases from 2.0 mJ/pulse to 4.0 mJ/pulse, and the degree of polarization (DOP) increases from 0.1 to 0.78, obviously when the shear distance increases from 0 mm to 4 mm. As the liquid crystal droplets are gradually oriented in the shear direction caused by alignment direction of polymer chain and anisotropy of droplet shape, the scattering intensity perpendicular to the shear direction gradually decreases and that parallel to the shear direction gradually increases. The anisotropic absorption of the laser dye also plays a certain role as the shear distance is 0 mm. The controllable intensity and polarization degree of random laser have a huge potential for sensing applications.
- 4 August 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (32) , 27232-27238
Coherent Random Lasing from Dye Aggregates in Polydimethylsiloxane Thin Films
The coherent random laser (CRL) from dye-doped polydimethylsiloxane (PDMS) has been investigated in both nanoparticle-doped (NP-doped) thin films and pure dye thin films. Compared with the literature, the pump threshold is only 1.5 mJ/cm2 in the pure dye thin film with a low dye concentration. The spontaneously formed micro-/nanocrystals of Pyrromethene 597 (PM597) dye support both gain and random feedback in the bulk of the PDMS during the sample preparation. When the SiO2 NPs were doped, the pump threshold was reduced to 0.75 mJ/cm2. The threshold increased after the film was peeled off from glass, which indicates that the photon localization effect of the leaky-waveguide structure plays an important role in the reduction of the CRL threshold. By a change in the pump stripe length or the thickness of the film, the peak wavelength red-shifts 6.7 or 5.93 nm, respectively. The PM597 dye molecule solubility changes, and they spontaneously aggregate in the process of toluene volatilization; the PDMS cures, which is the reason for the formation of PM597 micro-/nanocrystals. This thin film random laser with a low dye concentration can be used in integrated optoelectronics and display imaging.
- 4 August 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (32) , 27232-27238
Coherent Random Lasing from Dye Aggregates in Polydimethylsiloxane Thin Films
The coherent random laser (CRL) from dye-doped polydimethylsiloxane (PDMS) has been investigated in both nanoparticle-doped (NP-doped) thin films and pure dye thin films. Compared with the literature, the pump threshold is only 1.5 mJ/cm2 in the pure dye thin film with a low dye concentration. The spontaneously formed micro-/nanocrystals of Pyrromethene 597 (PM597) dye support both gain and random feedback in the bulk of the PDMS during the sample preparation. When the SiO2 NPs were doped, the pump threshold was reduced to 0.75 mJ/cm2. The threshold increased after the film was peeled off from glass, which indicates that the photon localization effect of the leaky-waveguide structure plays an important role in the reduction of the CRL threshold. By a change in the pump stripe length or the thickness of the film, the peak wavelength red-shifts 6.7 or 5.93 nm, respectively. The PM597 dye molecule solubility changes, and they spontaneously aggregate in the process of toluene volatilization; the PDMS cures, which is the reason for the formation of PM597 micro-/nanocrystals. This thin film random laser with a low dye concentration can be used in integrated optoelectronics and display imaging.
- 7 February 2017
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 64 (14) , 1429-1434
Effect of alignment layer on polymer-dispersed liquid crystal random laser
The surface orienting effect of rubbed polyimide alignment layer on the random lasing (RL) properties of dye-doped polymer-dispersed liquid crystal (DDPDLC) was studied experimentally. Two groups of experiment were done and nematic liquid crystal E7 was used. In the first group, the samples were 25 μm non-oriented DDPDLC sample (N-DDPDLC) and 25 μm one-side oriented DDPDLC sample (P-DDPDLC). In the second, the samples were 10 μm N-DDPDLC and 10 μm P-DDPDLC sample. The results showed that compared to the N-DDPDLC, P-DDPDLC has a lower threshold, and the 10 μm P-DDPDLC has a lower threshold compared to the 25 μm P-DDPDLC. Apparently, the P-DDPDLC cell has stronger RL spike. The oriented layer changed the phase separation structure of DDPDLC which formed hierarchical structure so as to enhance the scattering intensity of system. It is a good way to reach high efficient random laser emission by tailoring the size and morphology of PDLC through surface orientation and Polymerization-induced phase separation process.
- 7 February 2017
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 64 (14) , 1429-1434
Effect of alignment layer on polymer-dispersed liquid crystal random laser
The surface orienting effect of rubbed polyimide alignment layer on the random lasing (RL) properties of dye-doped polymer-dispersed liquid crystal (DDPDLC) was studied experimentally. Two groups of experiment were done and nematic liquid crystal E7 was used. In the first group, the samples were 25 μm non-oriented DDPDLC sample (N-DDPDLC) and 25 μm one-side oriented DDPDLC sample (P-DDPDLC). In the second, the samples were 10 μm N-DDPDLC and 10 μm P-DDPDLC sample. The results showed that compared to the N-DDPDLC, P-DDPDLC has a lower threshold, and the 10 μm P-DDPDLC has a lower threshold compared to the 25 μm P-DDPDLC. Apparently, the P-DDPDLC cell has stronger RL spike. The oriented layer changed the phase separation structure of DDPDLC which formed hierarchical structure so as to enhance the scattering intensity of system. It is a good way to reach high efficient random laser emission by tailoring the size and morphology of PDLC through surface orientation and Polymerization-induced phase separation process.