Keisuke Ide
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Keisuke Ide has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Hidenori Hiramatsu
MDX Research Center for Element Strategy, Institute of Integrated Research, Institute of Science Tokyo, 4259 Nagatsuta, Midori, Yokohama 226-8501, Japan
11 shared publications - Hideo Hosono
Institute of Science Tokyo
10 shared publications - Toshio Kamiya
Institute of Science Tokyo
9 shared publications - Takayoshi Katase
Materials and Structures Laboratory, Institute of Integrated Research, Institute of Science Tokyo, 4259 Nagatsuta, Midori, Yokohama 226-8501, Japan
7 shared publications Toshio Kamiya
Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
7 shared publicationsHideo Hosono
Laboratory for Materials and Structures Tokyo Institute of Technology 4259 Nagatsuta Midori‐ku Yokohama 226‐8503 Japan
6 shared publications
Latest Publications
- Open Access
- 27 May 2026
- Published by Wiley in Advanced Intelligent Systems
- Vol. 8 (8)
Tandem Neural Network Rapidly Solves Multivalued Inverse Problems: Application to Oxide‐Semiconductor Characterization
Inverse analysis of semiconductor devices often suffers from non‐unique solutions, known as multivaluedness, within a large‐scale parameter space. Here, we show that a tandem neural network (tandem NN), which couples a pretrained forward model to an inverse model and jointly minimizes prediction and reconstruction losses, overcomes this challenge for amorphous In–Ga–Zn–O thin‐film transistors. Trained on 1000 simulated transfer curves covering six intrinsic material parameters varied across ranges three to five orders of magnitude wider than in previous studies, the network infers multiple physical parameters from a single current–voltage curve in less than 1 ms with R 2 = 0.99. The inferred parameters reproduce experimental current–voltage characteristics of lab‐fabricated devices without additional fitting, confirming physical validity. Compared with conventional TCAD iterative fitting, the tandem NN provides significant acceleration and paves the way for autonomous experimentation for materials discovery, digital‐twin frameworks in next‐generation transistor manufacturing, and other multivalued inverse problem domains.
- 27 May 2026
- Published by Wiley in Advanced Intelligent Systems
- Vol. 8 (8)
Open AccessTandem Neural Network Rapidly Solves Multivalued Inverse Problems: Application to Oxide‐Semiconductor Characterization
Inverse analysis of semiconductor devices often suffers from non‐unique solutions, known as multivaluedness, within a large‐scale parameter space. Here, we show that a tandem neural network (tandem NN), which couples a pretrained forward model to an inverse model and jointly minimizes prediction and reconstruction losses, overcomes this challenge for amorphous In–Ga–Zn–O thin‐film transistors. Trained on 1000 simulated transfer curves covering six intrinsic material parameters varied across ranges three to five orders of magnitude wider than in previous studies, the network infers multiple physical parameters from a single current–voltage curve in less than 1 ms with R 2 = 0.99. The inferred parameters reproduce experimental current–voltage characteristics of lab‐fabricated devices without additional fitting, confirming physical validity. Compared with conventional TCAD iterative fitting, the tandem NN provides significant acceleration and paves the way for autonomous experimentation for materials discovery, digital‐twin frameworks in next‐generation transistor manufacturing, and other multivalued inverse problem domains.
- Open Access
- 6 February 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Realization of Non‐Equilibrium Wurtzite Structure in Heterovalent Ternary MgSiN2 Film Grown by Reactive Sputtering
The piezoelectric and ferroelectric applications of heterovalent ternary materials are not well explored. Epitaxial MgSiN2 films are grown at 600 °C on (111)Pt//(001)Al2O3 substrates by the reactive sputtering method using metallic Mg and Si under the N2 atmosphere. Detailed X‐ray diffraction measurements and transmission electron microscopy observations revealed that the epitaxially grown films on the substrates have a hexagonal wurtzite structure with c‐axis out‐of‐plane orientation. The random occupation of this structure by Mg and Si differs from that of the previously reported structure in which these two cations periodically occupy the cationic sites. However, the lattice spacings closely approximate those that are previously reported, irrespective of the ordering, and they are almost comparable with those of (Al0.8Sc0.2)N. The wide bandgap of >5.0 eV in deposited MgSiN2 is compatible with that of AlN and suggests durability against the application of strong external electric fields, possibly to induce polarization switching. In addition, MgSiN2 is shown to have piezoelectric properties with an effective d33 value of 2.3 pm V−1 for the first time. This work demonstrates the compositional expansion of hexagonal wurtzite to heterovalent ternary nitrides for novel piezoelectric materials, whose ferroelectricity is expected.
- 6 February 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Open AccessRealization of Non‐Equilibrium Wurtzite Structure in Heterovalent Ternary MgSiN2 Film Grown by Reactive Sputtering
The piezoelectric and ferroelectric applications of heterovalent ternary materials are not well explored. Epitaxial MgSiN2 films are grown at 600 °C on (111)Pt//(001)Al2O3 substrates by the reactive sputtering method using metallic Mg and Si under the N2 atmosphere. Detailed X‐ray diffraction measurements and transmission electron microscopy observations revealed that the epitaxially grown films on the substrates have a hexagonal wurtzite structure with c‐axis out‐of‐plane orientation. The random occupation of this structure by Mg and Si differs from that of the previously reported structure in which these two cations periodically occupy the cationic sites. However, the lattice spacings closely approximate those that are previously reported, irrespective of the ordering, and they are almost comparable with those of (Al0.8Sc0.2)N. The wide bandgap of >5.0 eV in deposited MgSiN2 is compatible with that of AlN and suggests durability against the application of strong external electric fields, possibly to induce polarization switching. In addition, MgSiN2 is shown to have piezoelectric properties with an effective d33 value of 2.3 pm V−1 for the first time. This work demonstrates the compositional expansion of hexagonal wurtzite to heterovalent ternary nitrides for novel piezoelectric materials, whose ferroelectricity is expected.
- Open Access
- 4 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (6) , 3504-3513
Reversible Thermal Conductivity Modulation of Non-equilibrium (Sn1–xPbx)S by 2D–3D Structural Phase Transition above Room Temperature
- 4 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (6) , 3504-3513
Open AccessReversible Thermal Conductivity Modulation of Non-equilibrium (Sn1–xPbx)S by 2D–3D Structural Phase Transition above Room Temperature
- 18 January 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 107 (4) , L041201
Local electronic structure of dilute hydrogen in probed by muonsThe local electronic structure of muons (Mu) as dilute pseudohydrogen in single-crystalline has been studied by the muon spin rotation/relaxation . High-precision measurements over a long time range of have clearly identified two distinct Mu states: a quasistatic Mu and fast-moving Mu . By comparing this result with predictions from the recently established ambipolarity model, these two states are respectively attributed to the relaxed-excited states associated with the donor and acceptor levels predicted by density functional theory (DFT) calculations for the interstitial H. Furthermore, the local electronic structure of is found to be an OMu-bonded state with three-coordinated oxygen. The structure is almost identical with the thermal equilibrium state of H, and it is found to function as an electron donor. The other is considered to be in the hydride state from the ambipolarity model, suggesting that it is in fast diffusion motion through the short-lived neutral state due to the charge exchange reaction with conduction electrons .- 18 January 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 107 (4) , L041201
Local electronic structure of dilute hydrogen in probed by muonsThe local electronic structure of muons (Mu) as dilute pseudohydrogen in single-crystalline has been studied by the muon spin rotation/relaxation . High-precision measurements over a long time range of have clearly identified two distinct Mu states: a quasistatic Mu and fast-moving Mu . By comparing this result with predictions from the recently established ambipolarity model, these two states are respectively attributed to the relaxed-excited states associated with the donor and acceptor levels predicted by density functional theory (DFT) calculations for the interstitial H. Furthermore, the local electronic structure of is found to be an OMu-bonded state with three-coordinated oxygen. The structure is almost identical with the thermal equilibrium state of H, and it is found to function as an electron donor. The other is considered to be in the hydride state from the ambipolarity model, suggesting that it is in fast diffusion motion through the short-lived neutral state due to the charge exchange reaction with conduction electrons .- 7 November 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (19) , 192108
Low-temperature-processable amorphous-oxide-semiconductor-based phosphors for durable light-emitting diodes
In this study, we fabricated light-emitting diodes (LEDs) on glass substrates at a maximum process temperature of 200 °C using amorphous oxide semiconductor (AOS) materials as emission layers. Amorphous gallium oxide films doped with rare-earth elements (Eu, Pr, and Tb) were employed as AOS emission layers, and the LEDs emitted clear red, green, and pink luminescence upon direct-current application even in the ambient environment. Resonance photoelectron spectroscopy revealed the difference in the electronic structure of the films for each rare-earth dopant, suggesting different emission mechanisms, viz., electron–hole recombination and impact excitation. Although it is widely believed that amorphous materials are unsuitable for use as emission layers of LEDs because of their high concentrations of mid-gap states and defects, the developed rare-earth-doped AOS materials show good performance as emission layers. This study provides opportunities for the advancement of flexible display technologies operating in harsh environments.
- 7 November 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (19) , 192108
Low-temperature-processable amorphous-oxide-semiconductor-based phosphors for durable light-emitting diodes
In this study, we fabricated light-emitting diodes (LEDs) on glass substrates at a maximum process temperature of 200 °C using amorphous oxide semiconductor (AOS) materials as emission layers. Amorphous gallium oxide films doped with rare-earth elements (Eu, Pr, and Tb) were employed as AOS emission layers, and the LEDs emitted clear red, green, and pink luminescence upon direct-current application even in the ambient environment. Resonance photoelectron spectroscopy revealed the difference in the electronic structure of the films for each rare-earth dopant, suggesting different emission mechanisms, viz., electron–hole recombination and impact excitation. Although it is widely believed that amorphous materials are unsuitable for use as emission layers of LEDs because of their high concentrations of mid-gap states and defects, the developed rare-earth-doped AOS materials show good performance as emission layers. This study provides opportunities for the advancement of flexible display technologies operating in harsh environments.
- 20 May 2022
- Published by Wiley
- p. 577-584
Rare Earth– and Transition Metal–Doped Amorphous Oxide Semiconductor Phosphors for Novel Light‐Emitting Diode Displays
- 20 May 2022
- Published by Wiley
- p. 577-584
Rare Earth– and Transition Metal–Doped Amorphous Oxide Semiconductor Phosphors for Novel Light‐Emitting Diode Displays
- 20 May 2022
- Published by Wiley
- p. 93-103
Defects and Relevant Properties
- 20 April 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (17) , 6650-6659
Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors
We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.
- 20 April 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (17) , 6650-6659
Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors
We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.
- 14 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (16) , 18682-18689
High-Mobility Metastable Rock-Salt Type (Sn,Ca)Se Thin Film Stabilized by Direct Epitaxial Growth on a YSZ (111) Single-Crystal Substrate
Metastable cubic (Sn1–xPbx)Se with x ≥ 0.5 is expected to be a high mobility semiconductor due to its Dirac-like electronic state, but it has an excessively high carrier concentration of ∼1019 cm–3 and is not suitable for semiconductor device applications such as thin film transistors and solar cells. Further, thin films of (Sn1–xPbx)Se require a complicated synthesis process because of the high vapor pressure of Pb. We herein report the direct growth of metastable cubic (Sn1–xCax)Se films alloyed with CaSe, which has a wider bandgap and lower vapor pressure than PbSe. The cubic (Sn1–xCax)Se epitaxial films with x = 0.4–0.8 are stabilized on YSZ (111) single crystalline substrates by pulsed laser deposition. (Sn1–xCax)Se has a direct-transition-type bandgap, and the bandgap energy can be varied from 1.4 eV (x = 0.4) to 2.0 eV (x = 0.8) by changing x. These films with x = 0.4–0.6 show p-type conduction with low hole carrier concentrations of ∼1017 cm–3. Hall mobility analysis suggests that the hole transport would be dominated by 180° rotational domain structures, which is specific to (111) oriented epitaxial films. However, it, in turn, clarifies that the in-grain carrier mobility in the (Sn0.6Ca0.4)Se film is as high as 322 cm2/(Vs), which is much higher than those in thermodynamically stable layered SnSe and other Sn-based layered semiconductor films at room temperature. Therefore, the present results prove the potential of high mobility (Sn1–xCax)Se films for semiconductor device applications via a simple thin-film deposition process.
- 14 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (16) , 18682-18689
High-Mobility Metastable Rock-Salt Type (Sn,Ca)Se Thin Film Stabilized by Direct Epitaxial Growth on a YSZ (111) Single-Crystal Substrate
Metastable cubic (Sn1–xPbx)Se with x ≥ 0.5 is expected to be a high mobility semiconductor due to its Dirac-like electronic state, but it has an excessively high carrier concentration of ∼1019 cm–3 and is not suitable for semiconductor device applications such as thin film transistors and solar cells. Further, thin films of (Sn1–xPbx)Se require a complicated synthesis process because of the high vapor pressure of Pb. We herein report the direct growth of metastable cubic (Sn1–xCax)Se films alloyed with CaSe, which has a wider bandgap and lower vapor pressure than PbSe. The cubic (Sn1–xCax)Se epitaxial films with x = 0.4–0.8 are stabilized on YSZ (111) single crystalline substrates by pulsed laser deposition. (Sn1–xCax)Se has a direct-transition-type bandgap, and the bandgap energy can be varied from 1.4 eV (x = 0.4) to 2.0 eV (x = 0.8) by changing x. These films with x = 0.4–0.6 show p-type conduction with low hole carrier concentrations of ∼1017 cm–3. Hall mobility analysis suggests that the hole transport would be dominated by 180° rotational domain structures, which is specific to (111) oriented epitaxial films. However, it, in turn, clarifies that the in-grain carrier mobility in the (Sn0.6Ca0.4)Se film is as high as 322 cm2/(Vs), which is much higher than those in thermodynamically stable layered SnSe and other Sn-based layered semiconductor films at room temperature. Therefore, the present results prove the potential of high mobility (Sn1–xCax)Se films for semiconductor device applications via a simple thin-film deposition process.
- 11 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (4) , 2026-2031
Low Residual Carrier Density and High In-Grain Mobility in Polycrystalline Zn3N2 Films on a Glass Substrate
- 11 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (4) , 2026-2031
Low Residual Carrier Density and High In-Grain Mobility in Polycrystalline Zn3N2 Films on a Glass Substrate