Supratim Mitra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Supratim Mitra has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Ajit R. Kulkarni
Indian Institute of Technology Bombay
6 shared publicationsAnshika Bagla
Department of Physical Sciences, Banasthali Vidyapith
5 shared publications- Deepshikha Rathore
Amity School of Applied Sciences, Amity University Rajasthan, Jaipur, India
4 shared publications François Rault
4 shared publications- Fabien Salaün
Univ. Lille, ENSAIT, ULR 2461 - GEMTEX - Génie et Matériaux Textiles
3 shared publications Kaliyan Hembram
3 shared publications
Latest Publications
- Open Access
- 12 September 2026
- Published by Elsevier in SSRN Electronic Journal
Designing Graphene Derivative-Integrated Carbon Nanofiber Electrodes for High-Performance Electrochemical Devices
The development of breathable and multifunctional electrode architectures capable of simultaneously delivering high electrochemical performance, mechanical flexibility, and electromagnetic interference (EMI) shielding is critically important for next-generation wearable electronic systems. Herein, we report a graphene-derivative-mediated interfacial carbonization engineering strategy for tailoring graphitic ordering, defect chemistry, conductive network formation, and multifunctional performance in electrospun poly(acrylonitrile) (PAN)-derived carbon nanofiber (CNF) electrodes. Graphene, graphene oxide (GO), and reduced graphene oxide (rGO) were systematically incorporated into PAN nanofibers, followed by stabilization and thermal carbonization to investigate the distinct role of graphene derivatives during carbon structure evolution. The results reveal that graphene derivatives actively regulate stabilization and graphitization pathways rather than merely acting as conductive fillers. Pristine graphene promotes graphitic domain ordering and conductive network formation, whereas GO facilitates defect generation and interfacial polarization through oxygen-functional-group-mediated interactions. In contrast, rGO provides an optimized balance between graphitic conductivity and defect-assisted electrochemical activity, resulting in superior electrochemical performance. The optimized rGOCNF electrode exhibits the highest specific capacitance of 675 F g⁻¹, excellent cyclic stability with 95.2% capacitance retention after 10,000 cycles, and an energy density of 60 Wh kg⁻¹ at a power density of 150 W kg⁻¹. Furthermore, the interconnected porous nanofibrous architecture simultaneously enables efficient vapor permeability, mechanical flexibility, and absorption-dominated EMI shielding with a shielding effectiveness up to 8.4 dB in the X-band region. This work establishes an interfacial carbonization engineering approach for designing breathable multifunctional carbon nanofiber electrodes toward wearable electrochemical and flexible electronic applications.
- 12 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDesigning Graphene Derivative-Integrated Carbon Nanofiber Electrodes for High-Performance Electrochemical Devices
The development of breathable and multifunctional electrode architectures capable of simultaneously delivering high electrochemical performance, mechanical flexibility, and electromagnetic interference (EMI) shielding is critically important for next-generation wearable electronic systems. Herein, we report a graphene-derivative-mediated interfacial carbonization engineering strategy for tailoring graphitic ordering, defect chemistry, conductive network formation, and multifunctional performance in electrospun poly(acrylonitrile) (PAN)-derived carbon nanofiber (CNF) electrodes. Graphene, graphene oxide (GO), and reduced graphene oxide (rGO) were systematically incorporated into PAN nanofibers, followed by stabilization and thermal carbonization to investigate the distinct role of graphene derivatives during carbon structure evolution. The results reveal that graphene derivatives actively regulate stabilization and graphitization pathways rather than merely acting as conductive fillers. Pristine graphene promotes graphitic domain ordering and conductive network formation, whereas GO facilitates defect generation and interfacial polarization through oxygen-functional-group-mediated interactions. In contrast, rGO provides an optimized balance between graphitic conductivity and defect-assisted electrochemical activity, resulting in superior electrochemical performance. The optimized rGOCNF electrode exhibits the highest specific capacitance of 675 F g⁻¹, excellent cyclic stability with 95.2% capacitance retention after 10,000 cycles, and an energy density of 60 Wh kg⁻¹ at a power density of 150 W kg⁻¹. Furthermore, the interconnected porous nanofibrous architecture simultaneously enables efficient vapor permeability, mechanical flexibility, and absorption-dominated EMI shielding with a shielding effectiveness up to 8.4 dB in the X-band region. This work establishes an interfacial carbonization engineering approach for designing breathable multifunctional carbon nanofiber electrodes toward wearable electrochemical and flexible electronic applications.
- 13 May 2025
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (2) , 268-280
A breathable piezoelectric poly(vinylidene fluoride) electrospun nanofiber membrane obtained through controlling solution parameters
- 13 May 2025
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (2) , 268-280
A breathable piezoelectric poly(vinylidene fluoride) electrospun nanofiber membrane obtained through controlling solution parameters
- Top Cited Papers
- 13 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (12) , 5808-5820
ZnO@C/PVDF Electrospun Membrane as a Piezoelectric Nanogenerator for Wearable Applications
- 13 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (12) , 5808-5820
Top Cited PapersZnO@C/PVDF Electrospun Membrane as a Piezoelectric Nanogenerator for Wearable Applications
- Open Access
ZnO@C/PVDF Electrospun Membrane as Piezoelectric Nanogenerator for Wearable Applications
The rapid growth of wearable technology demands sustainable, flexible, and lightweight energy sources for various applications ranging from health monitoring to electronic textiles. Although wearable devices based on the piezoelectric effect are widespread, achieving simultaneous breathability, waterproof, and enhanced piezoelectric performance remains challenging. Herein, this study aims to develop a piezoelectric nanogenerator (PENG) using ZnO nanofillers in two morphologies (nanoparticles and nanorods), with a carbon coating (ZnO@C) core-cell structure to enhance piezoelectric performance. Electrospinning technique was employed to fabricate a lightweight, breathable, and water-resistant ZnO@C/PVDF membrane, enabling in situ electrical poling and mechanical stretching to enhance electroactive \b{eta}-phase formation and thus improve piezoelectric performance. A maximum power density of 384.83 μW/cm3 was obtained at RL = 104 kΩ, with a maximum Vout = 19.9 V for ZnO@C nanorod-incorporated PVDF samples. The results demonstrate that ZnO@C nanorods exhibit superior voltage output due to their larger surface-to-volume ratio, leading to enhanced interaction with PVDF chains compared to nanoparticles. The fabricated membrane showed promising results with a water vapor transmission rate (WVTR) of ~0.5 kg/m2/day, indicating excellent breathability, and a water contact angle of ~116°, demonstrating significant waterproofness. These findings highlight the potential of the ZnO@C/PVDF electrospun membrane as an effective piezoelectric nanogenerator and energy harvester for wearable applications.
Open AccessZnO@C/PVDF Electrospun Membrane as Piezoelectric Nanogenerator for Wearable Applications
The rapid growth of wearable technology demands sustainable, flexible, and lightweight energy sources for various applications ranging from health monitoring to electronic textiles. Although wearable devices based on the piezoelectric effect are widespread, achieving simultaneous breathability, waterproof, and enhanced piezoelectric performance remains challenging. Herein, this study aims to develop a piezoelectric nanogenerator (PENG) using ZnO nanofillers in two morphologies (nanoparticles and nanorods), with a carbon coating (ZnO@C) core-cell structure to enhance piezoelectric performance. Electrospinning technique was employed to fabricate a lightweight, breathable, and water-resistant ZnO@C/PVDF membrane, enabling in situ electrical poling and mechanical stretching to enhance electroactive \b{eta}-phase formation and thus improve piezoelectric performance. A maximum power density of 384.83 μW/cm3 was obtained at RL = 104 kΩ, with a maximum Vout = 19.9 V for ZnO@C nanorod-incorporated PVDF samples. The results demonstrate that ZnO@C nanorods exhibit superior voltage output due to their larger surface-to-volume ratio, leading to enhanced interaction with PVDF chains compared to nanoparticles. The fabricated membrane showed promising results with a water vapor transmission rate (WVTR) of ~0.5 kg/m2/day, indicating excellent breathability, and a water contact angle of ~116°, demonstrating significant waterproofness. These findings highlight the potential of the ZnO@C/PVDF electrospun membrane as an effective piezoelectric nanogenerator and energy harvester for wearable applications.
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
The effect of synthesis techniques on the gas sensing properties of TiO2/SiC/CoFe2O4 nanocomposites as gas sensor
This study investigates the impact of two distinct methodologies on the structural, morphological, and gas sensing properties of TiO2/SiC/CoFe2O4 (TSC) nanocomposites determined using x-ray diffraction (XRD), scanning electron microscopy (SEM), LCR meter, and gas sensing unit respectively. The TiO2/SiC/CoFe2O4 nanocomposites were synthesized using chemical co-precipitation method (C-TSC) and the solid state method (G-TSC). The Scherrer formula was used to calculate the average grain size of C-TSC and G-TSC, which was estimated to be 8 ± 2 nm and 10 ± 2 nm, respectively. The formation of TSC nanocomposites was confirmed by XRD, SEM, and EDX analysis. The response (%) toward ethanol and NH3 gas was tested as a function of flow rate (ppm) and temperature from room temperature (28 °C) to 300 °C. The response (%) was observed to be increasing with increasing temperature and three intermediate temperatures were found. The response and recovery time were also measured with varying gas concentrations. The long-term stability of devices was tested up to 30 days and less variation in result was found, which confirms stability of sensor. The material synthesized using chemical co-precipitation method (C-TSC) shows better properties than G-TSC.
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
The effect of synthesis techniques on the gas sensing properties of TiO2/SiC/CoFe2O4 nanocomposites as gas sensor
This study investigates the impact of two distinct methodologies on the structural, morphological, and gas sensing properties of TiO2/SiC/CoFe2O4 (TSC) nanocomposites determined using x-ray diffraction (XRD), scanning electron microscopy (SEM), LCR meter, and gas sensing unit respectively. The TiO2/SiC/CoFe2O4 nanocomposites were synthesized using chemical co-precipitation method (C-TSC) and the solid state method (G-TSC). The Scherrer formula was used to calculate the average grain size of C-TSC and G-TSC, which was estimated to be 8 ± 2 nm and 10 ± 2 nm, respectively. The formation of TSC nanocomposites was confirmed by XRD, SEM, and EDX analysis. The response (%) toward ethanol and NH3 gas was tested as a function of flow rate (ppm) and temperature from room temperature (28 °C) to 300 °C. The response (%) was observed to be increasing with increasing temperature and three intermediate temperatures were found. The response and recovery time were also measured with varying gas concentrations. The long-term stability of devices was tested up to 30 days and less variation in result was found, which confirms stability of sensor. The material synthesized using chemical co-precipitation method (C-TSC) shows better properties than G-TSC.
- Open Access
Influence of Solution Parameters on Phase Formation and Morphology of Electrospun Poly(vinylidene fluoride) Nanofiber
Poly(vinylidene fluoride), PVDF nanofibers were prepared using electrospinning method and the influence of electrospinning parameters such as PVDF concentration, DMF:Acetone ratio on the formation of different phases ({\alpha}, \b{eta}, and {\gamma}) and desired morphology were investigated. A detail analysis of X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectrometer data by deconvoluting the peaks were carried out for assigning and accurately identifying the peaks associated to a particular PVDF phase. SEM micrographs further helped in understanding the mechanism of desired \b{eta}-phase as well as in obtaining a condition for bead-free nanofibers. Interestingly, the mechanism of formation of phases are found mostly governed by the balance between surface tension and viscosity which is controlled by PVDF concentration and acetone content in the solution. A PVDF concentration of 20% (w/v) and DMF:Acetone ratio 1:1 was found suitable for maximum \b{eta}-phase in a completely bead-free nanofibers. The methodology and understanding of underlying mechanism of desired phase and morphology suggest a guideline for optimization of \b{eta}-phase and bead-free fibers in PVDF-based nanocomposite as well.Open AccessInfluence of Solution Parameters on Phase Formation and Morphology of Electrospun Poly(vinylidene fluoride) Nanofiber
Poly(vinylidene fluoride), PVDF nanofibers were prepared using electrospinning method and the influence of electrospinning parameters such as PVDF concentration, DMF:Acetone ratio on the formation of different phases ({\alpha}, \b{eta}, and {\gamma}) and desired morphology were investigated. A detail analysis of X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectrometer data by deconvoluting the peaks were carried out for assigning and accurately identifying the peaks associated to a particular PVDF phase. SEM micrographs further helped in understanding the mechanism of desired \b{eta}-phase as well as in obtaining a condition for bead-free nanofibers. Interestingly, the mechanism of formation of phases are found mostly governed by the balance between surface tension and viscosity which is controlled by PVDF concentration and acetone content in the solution. A PVDF concentration of 20% (w/v) and DMF:Acetone ratio 1:1 was found suitable for maximum \b{eta}-phase in a completely bead-free nanofibers. The methodology and understanding of underlying mechanism of desired phase and morphology suggest a guideline for optimization of \b{eta}-phase and bead-free fibers in PVDF-based nanocomposite as well. - 21 January 2019
- Published by Springer Nature in Electronic Materials Letters
- Vol. 15 (2) , 159-165
Study of Domain Switching Using Piezoresponse Force Microscopy in Ca0.4Sr0.6Bi4Ti4O15 Thin Film for Electromechanical Applications
- 21 January 2019
- Published by Springer Nature in Electronic Materials Letters
- Vol. 15 (2) , 159-165
Study of Domain Switching Using Piezoresponse Force Microscopy in Ca0.4Sr0.6Bi4Ti4O15 Thin Film for Electromechanical Applications
- 1 May 2018
- Published by Elsevier in Scripta Materialia
- Vol. 149, 134-138
Origin of enhanced piezoelectric properties and room temperature multiferroism in MnO2 added 0.90(Li0.12Na0.88NbO3)-0.10BaTiO3 ceramic
- 1 May 2018
- Published by Elsevier in Scripta Materialia
- Vol. 149, 134-138
Origin of enhanced piezoelectric properties and room temperature multiferroism in MnO2 added 0.90(Li0.12Na0.88NbO3)-0.10BaTiO3 ceramic