Alan Boudreau

The chromatographic model for chromitite formation previously presented is updated to include sulfide as a possible participating phase. In the model, chromite is precipitated at an upward-moving reaction front as a Cr-bearing (gabbro)norite protolith reacts with a Cl-rich fluid that becomes progressively undersaturated in pyroxene as it rises into hotter parts of the crystal pile, leaving an anorthositic residue. The liberation of Fe during the dissolution of orthopyroxene can drive concurrent sulfide saturation. If the reaction front encounters an orthopyroxenite the model produces a first-order approximation for the Merensky Reef section of anorthosite–chromite–orthopyroxenite. In addition, MELTS modelling shows that the isothermal addition of Cr ₂ O ₃ alone to a nearly solid (gabbro)norite assemblage increases the amount of both chromite and liquid at the expense of other silicate minerals owing to the liberation of Ca, Na and Si, the latter two acting as fluxing agents. A generalized constitutional zone refining model is presented in which a variety of spinel–silicate layering types (e.g. Bushveld magnetite layers and Skaergaard trough layering) can develop over time.

Several lines of evidence, including hydrous melt inclusions and unusually Cl-rich apatite, have been used to suggest that the reappearance of olivine and PGE-sulfide of the J-M Reef in the Stillwater Complex, Montana, is due to fluid infiltration and hydration melting. This study builds upon the hydration melting model using the programs MELTS and PELE with Stillwater bulk rock compositions for the original protolith. Cl-bearing phases are not modeled by MELTS and thus simple oxide mixtures of either a pure H₂O or a H₂O + Na₂O “faux brine” are added to norite, gabbronorite, and melanorite protoliths at 1050 °C at 2 kbar pressure, conditions for which the nominally “dry” protolith is > 95% solid. Incongruent hydration melting results in up to 37% olivine produced in the melanorite. The olivine Fo content is a function of the partial melt retained on cooling, and ranges between 76 and 86, overlapping the natural range of olivine compositions observed in the rocks. Modeling with the PELE program, which includes a silicate liquid Cl component, sulfur species, and a more complex C-O–H-S fluid, suggests that, for CO₂-rich fluids, fluid metal concentrations on the order of 25 ppm Pt, 75 ppm Pd, 0.03 wt.% Cu, and 0.20 wt.% Ni at a fluid/rock mass ratio of ~ 0.25 are needed to account for the observed ore grades. Sulfide and ore metals are readily remobilized for more H₂O-rich fluids, consistent with heterogeneous distribution of sulfide and regionally variable ore grades.

Drilling related to development of the platinum-group element deposit of the J-M Reef of the Stillwater Complex returned samples of a rare chromitite seam between anorthosite and norite in a discordant anorthositic body. Plagioclase core An concentrations are marginally higher and modestly reversely zoned on the norite side (average Ancore = 83·8; average Ancore – Anrim = –1·1) as compared with the anorthosite side (average Ancore 82·5; average Ancore – Anrim = +1·0). The anorthosites are also characterized by a slightly smaller average plagioclase grain size than plagioclase in the norite (1·41 mm and 1·54 mm, respectively). The chromite can contain single and polyphase inclusions of orthopyroxene, plagioclase, amphibole, biotite and Cl-rich apatite. These and other compositional and textural features, as well as inference from other discordant anorthositic bodies in the Banded series, are all consistent with a chromatographic model of chromite precipitation at a reaction front as a norite protolith reacts with a Cl-rich aqueous fluid saturated in plagioclase alone. Chromitite seam formation is modeled using an infiltration metasomatic model, in which a fluid becomes progressively undersaturated in pyroxene as it rises into the hotter part of the crystal pile. As this pyroxene-undersaturated fluid moves through a noritic protolith, it dissolves the Cr-bearing orthopyroxene to produce an anorthosite. Chromite precipitates at the reaction front between the anorthosite and the norite owing to liberation of Mg and Cr from pyroxene. Continuous redissolution and reprecipitation of chromite occurs as the pyroxene dissolution front moves in the direction of fluid flow, collecting the Cr lost from the anorthosite. Owing to Cr dissolved mainly as a neutral divalent cation complex, CrCl(OH)0, in the solution, but incorporated as a trivalent cation in chromite, the required redox reaction can involve concurrent precipitation of sulfide with chromite. This mechanism differs from some recent models in that the anorthosites are themselves replacement bodies and are not original precipitates from a magma nor formed by loss of mafic material by partial melting. The results show the need for experimental mineral solubility data at T and P conditions appropriate to upper crustal mafic–ultramafic intrusions.

We documented occurrences of native copper (Cu), silver (Ag), and gold (Au) in a pāhoehoe flow from Kīlauea volcano (Hawaii, USA), an a‘ā flow from Mauna Loa volcano (Hawaii), and a mid-oceanic-ridge basalt (MORB) from the Chile Ridge (southeastern Pacific Ocean). Native Ag in Kīlauea and MORB samples consistently contained minor Cl (

Hydromagmatic Processes and Platinum-Group Element Deposits in Layered Intrusions - by Alan Boudreau March 2019

Hydromagmatic Processes and Platinum-Group Element Deposits in Layered Intrusions - by Alan Boudreau March 2019