Ha Young Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ha Young Lee has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Sam Nyung Yi
Department of Nano‐Semiconductor Engineering Korea Maritime & Ocean University Busan Republic of Korea
14 shared publications Hyung Soo Ahn
Major of Nano‐Semiconductor Engineering Korea Maritime & Ocean University Busan 49112 South Korea
6 shared publicationsMin Sub Kwak
Major of Nano‐Semiconductor Engineering Korea Maritime & Ocean University Busan 49112 South Korea
6 shared publicationsJi-Yeon Noh
5 shared publicationsKyung-Won Lim
Korea Institute of Materials Science (KIMS), Changwon, Republic of Korea
5 shared publicationsDong Han Ha
Materials and Convergence Measurement Institute Korea Research Institute of Standards and Science 267 Gajeong‐ro Yuseong‐gu Daejeon 34113 South Korea
4 shared publications
Latest Publications
- Open Access
- 20 March 2025
- Published by Korean Liver Cancer Association in Journal of Liver Cancer
- Vol. 25 (1) , 123-133
Identification of new biomarkers of hepatic cancer stem cells through proteomic profiling
In hepatocellular carcinoma (HCC), which exhibits high mortality and recurrence rates globally, the traits of cancer stem cells that significantly influence recurrence and metastasis are not well understood. Cancer stem cells (CSCs) are self-renewing cell types identified in most liquid and solid cancers, contributing to tumor initiation, growth, resistance, recurrence, and metastasis following chemo-radiotherapy or trans-arterial chemoembolization therapy. CSCs are classified based on the expression of cell surface markers such as CD133, which varies depending on the tumor type. Proteomic analysis of liver cancer cell lines with cancer stem cell potential and HCC cancer cell lines lacking stem cell propensity was conducted to compare and analyze specific expression patterns. Proteomic profiling and enrichment analysis revealed higher expression of the calcium-binding protein S100 family in CD133+ Huh7 cells than in neg or wild-type cells. Furthermore, elevated expression of S100 family members was confirmed in an actual CD133+ liver cancer cell line via protein-protein network analysis and qPCR. The S100 family members are not only new markers of cancer stem cells but will also assist in identifying new treatment strategies for CSC metastasis and tumor advancement.
- 20 March 2025
- Published by Korean Liver Cancer Association in Journal of Liver Cancer
- Vol. 25 (1) , 123-133
Open AccessIdentification of new biomarkers of hepatic cancer stem cells through proteomic profiling
In hepatocellular carcinoma (HCC), which exhibits high mortality and recurrence rates globally, the traits of cancer stem cells that significantly influence recurrence and metastasis are not well understood. Cancer stem cells (CSCs) are self-renewing cell types identified in most liquid and solid cancers, contributing to tumor initiation, growth, resistance, recurrence, and metastasis following chemo-radiotherapy or trans-arterial chemoembolization therapy. CSCs are classified based on the expression of cell surface markers such as CD133, which varies depending on the tumor type. Proteomic analysis of liver cancer cell lines with cancer stem cell potential and HCC cancer cell lines lacking stem cell propensity was conducted to compare and analyze specific expression patterns. Proteomic profiling and enrichment analysis revealed higher expression of the calcium-binding protein S100 family in CD133+ Huh7 cells than in neg or wild-type cells. Furthermore, elevated expression of S100 family members was confirmed in an actual CD133+ liver cancer cell line via protein-protein network analysis and qPCR. The S100 family members are not only new markers of cancer stem cells but will also assist in identifying new treatment strategies for CSC metastasis and tumor advancement.
- 5 November 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (5)
Efficiency Improvement of Energy Harvesting Device Using Light Pressure Through Plasmon Coupling at the Interface Between Grained Ag Layer and Au Nanoparticles
Electricity generation using the piezoelectric effect is an important energy harvesting method. In this study, a solar radiation pressure‐driven crater‐shaped light pressure electric generator (LPEG) device with a Pb(Zr0.52, Ti0.48)O3 (PZT) piezoelectric layer and grained Ag layer is fabricated on GaAs(100) wafer. The electrical output of the device is improved by adsorbing Au nanoparticles (AuNPs) on the Ag layer with the surface of closely connected Ag nanoparticles (AgNPs). By controlling the size and concentration of the AuNPs, a maximum power density of 867.5 µW cm−2 is obtained under a solar simulator (AM 1.5G), which represents a 151.7% improvement over the case without AuNP adsorption. The results of Raman spectra, finite‐difference time‐domain (FDTD) simulations, and COMSOL Multiphysics demonstrate that the newly formed hotspots between AgNPs─AuNPs and AuNPs─AuNPs enhance the electric field of the incident light significantly and extend the region where the electric field is maximally amplified to 600–800 nm, resulting in increased solar radiation pressure on the PZT piezoelectric layer.
- 5 November 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (5)
Efficiency Improvement of Energy Harvesting Device Using Light Pressure Through Plasmon Coupling at the Interface Between Grained Ag Layer and Au Nanoparticles
Electricity generation using the piezoelectric effect is an important energy harvesting method. In this study, a solar radiation pressure‐driven crater‐shaped light pressure electric generator (LPEG) device with a Pb(Zr0.52, Ti0.48)O3 (PZT) piezoelectric layer and grained Ag layer is fabricated on GaAs(100) wafer. The electrical output of the device is improved by adsorbing Au nanoparticles (AuNPs) on the Ag layer with the surface of closely connected Ag nanoparticles (AgNPs). By controlling the size and concentration of the AuNPs, a maximum power density of 867.5 µW cm−2 is obtained under a solar simulator (AM 1.5G), which represents a 151.7% improvement over the case without AuNP adsorption. The results of Raman spectra, finite‐difference time‐domain (FDTD) simulations, and COMSOL Multiphysics demonstrate that the newly formed hotspots between AgNPs─AuNPs and AuNPs─AuNPs enhance the electric field of the incident light significantly and extend the region where the electric field is maximally amplified to 600–800 nm, resulting in increased solar radiation pressure on the PZT piezoelectric layer.
- 23 March 2023
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 82 (11) , 1078-1083
FDTD simulation of local electric field enhancement caused by nanoscale roughness comprising of different metals under the solar spectrum
- 23 March 2023
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 82 (11) , 1078-1083
FDTD simulation of local electric field enhancement caused by nanoscale roughness comprising of different metals under the solar spectrum
- 26 January 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (7)
Direct Current Piezoelectric Energy Harvesting Based on Plasmon‐Enhanced Solar Radiation Pressure
A piezoelectric energy generating device that produces electricity using plasmon‐enhanced solar radiation pressure (SRP) is developed. The SRP is greatly enhanced on the operational region of the device with a unique crater‐like structure, and direct current is generated successfully on the device. By optimizing the material and thickness of top electrode, a maximum power density of 396 µW cm−2 is obtained. In addition, by using Raman measurements, finite‐difference time‐domain simulation, and COMSOL Multiphysics analysis, it is confirmed that the SRP is greatly amplified on the operational region with the nanoscale surface roughness due to resonance between the incident light and surface plasmons. By increasing the rotational speed of an optical chopper used to measure the change in the output characteristics of the device, and comparing this with the simulated result, it is found that the constant charge produced by the piezoelectric effect arose due to the superposition of charge phases in the device.
- 26 January 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (7)
Direct Current Piezoelectric Energy Harvesting Based on Plasmon‐Enhanced Solar Radiation Pressure
A piezoelectric energy generating device that produces electricity using plasmon‐enhanced solar radiation pressure (SRP) is developed. The SRP is greatly enhanced on the operational region of the device with a unique crater‐like structure, and direct current is generated successfully on the device. By optimizing the material and thickness of top electrode, a maximum power density of 396 µW cm−2 is obtained. In addition, by using Raman measurements, finite‐difference time‐domain simulation, and COMSOL Multiphysics analysis, it is confirmed that the SRP is greatly amplified on the operational region with the nanoscale surface roughness due to resonance between the incident light and surface plasmons. By increasing the rotational speed of an optical chopper used to measure the change in the output characteristics of the device, and comparing this with the simulated result, it is found that the constant charge produced by the piezoelectric effect arose due to the superposition of charge phases in the device.
- 12 April 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (15) , 7547-7555
Effect of coupling crater structure and Ag nanoparticles on SERS enhancement
- 12 April 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (15) , 7547-7555
Effect of coupling crater structure and Ag nanoparticles on SERS enhancement
- 28 April 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (18) , 8418-8424
Multiscale surface modified magneto-mechano-triboelectric nanogenerator enabled by eco-friendly NaCl imprinting stamp for self-powered IoT applications
In this paper, we demonstrated a multiscale micro- and nano-structured magneto-mechano-triboelectric nanogenerator (MMTENG) enabled by a salt particle imprinting process to power an internet of thing (IoT) sensor. The fine salt particles were utilized to form a multiscale structure on a triboelectric polymer film by mechanical pressure via an eco-friendly, low-cost, and simple process, thereby reinforcing the contact triboelectrification and electrostatic induction. The surface modified MMTENG can generate an open-circuit peak-to-peak voltage of 851 V, a short-circuit current of 155 μA, and a maximum peak power of 10.3 mW under an AC magnetic field of 8 Oe. The energy device also presented output stability over 124 million operating cycles. Finally, the electricity of the surface enhanced MMTENG device was directly utilized to power an IoT temperature sensor with integration of an energy harvester, energy conversion circuit, and storage capacitor.
- 28 April 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (18) , 8418-8424
Multiscale surface modified magneto-mechano-triboelectric nanogenerator enabled by eco-friendly NaCl imprinting stamp for self-powered IoT applications
In this paper, we demonstrated a multiscale micro- and nano-structured magneto-mechano-triboelectric nanogenerator (MMTENG) enabled by a salt particle imprinting process to power an internet of thing (IoT) sensor. The fine salt particles were utilized to form a multiscale structure on a triboelectric polymer film by mechanical pressure via an eco-friendly, low-cost, and simple process, thereby reinforcing the contact triboelectrification and electrostatic induction. The surface modified MMTENG can generate an open-circuit peak-to-peak voltage of 851 V, a short-circuit current of 155 μA, and a maximum peak power of 10.3 mW under an AC magnetic field of 8 Oe. The energy device also presented output stability over 124 million operating cycles. Finally, the electricity of the surface enhanced MMTENG device was directly utilized to power an IoT temperature sensor with integration of an energy harvester, energy conversion circuit, and storage capacitor.
- Open Access
- 1 March 2019
- Published by The Materials Research Society of Korea in Korean Journal of Materials Research
- Vol. 29 (3) , 155-159
Fabrication and Time-Dependent Analysis of Micro-Hole in GaAs(100) Single Crystal Wafer Using Wet Chemical Etching Method
- 1 March 2019
- Published by The Materials Research Society of Korea in Korean Journal of Materials Research
- Vol. 29 (3) , 155-159
Open AccessFabrication and Time-Dependent Analysis of Micro-Hole in GaAs(100) Single Crystal Wafer Using Wet Chemical Etching Method
- 26 January 2019
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 74 (2) , 111-115
A Method to Enhance the Electric Field Intensity in a Gold Sub-microhole by Adding Copper Microspheres
We report a method to enhance the electric field intensity in a gold sub-microhole structure. The local electric field distribution was simulated using a finite-difference time-domain (FDTD) solution...
- 26 January 2019
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 74 (2) , 111-115
A Method to Enhance the Electric Field Intensity in a Gold Sub-microhole by Adding Copper Microspheres
We report a method to enhance the electric field intensity in a gold sub-microhole structure. The local electric field distribution was simulated using a finite-difference time-domain (FDTD) solution...
- 4 January 2019
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 12 (2) , 666-674
A high output magneto-mechano-triboelectric generator enabled by accelerated water-soluble nano-bullets for powering a wireless indoor positioning system
A high-performance magneto-mechano-triboelectric nanogenerator (MMTEG) was demonstrated by introducing accelerated water-soluble nano-bullet modified nanostructures to convert a gentle magnetic field into electric energy for powering an indoor wireless positioning system. NaCl salt nanoparticles were accelerated by an aerosol deposition (AD) process to collide on a perfluoroalkoxy (PFA) film with a high kinetic energy for the formation of a complicated nanomorphology on the triboelectric active surface. Under an alternating current (AC) magnetic field of 7 Oe, the MMTEG generated an open-circuit peak-to-peak voltage (Vpp) and a short-circuit current of 708 V and 277 μA, respectively. The harvesting device also presented a maximum peak power of 21.8 mW as well as a continuous AC output power of 4.8 mW (4.8 mJ per second). A self-powered indoor IoT positioning system was constructed by integrating the MMTEG, a power managing circuit, a storage element, and an IoT Bluetooth beacon. The electric energy from the MMTEG device enabled continuous operation of a beacon device, and we successfully confirmed the accurate location of the installed wireless positioning system, subsequently resulting in transmission of our indoor position to the main monitoring computer. Lastly, the MMTEG generated an open-circuit Vpp and a short-circuit current of 330 V and 23 μA, respectively, near a 60 Hz power cable connected to home appliances, which were large enough to turn on 108 blue light emitting diodes (LEDs).
- 4 January 2019
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 12 (2) , 666-674
A high output magneto-mechano-triboelectric generator enabled by accelerated water-soluble nano-bullets for powering a wireless indoor positioning system
A high-performance magneto-mechano-triboelectric nanogenerator (MMTEG) was demonstrated by introducing accelerated water-soluble nano-bullet modified nanostructures to convert a gentle magnetic field into electric energy for powering an indoor wireless positioning system. NaCl salt nanoparticles were accelerated by an aerosol deposition (AD) process to collide on a perfluoroalkoxy (PFA) film with a high kinetic energy for the formation of a complicated nanomorphology on the triboelectric active surface. Under an alternating current (AC) magnetic field of 7 Oe, the MMTEG generated an open-circuit peak-to-peak voltage (Vpp) and a short-circuit current of 708 V and 277 μA, respectively. The harvesting device also presented a maximum peak power of 21.8 mW as well as a continuous AC output power of 4.8 mW (4.8 mJ per second). A self-powered indoor IoT positioning system was constructed by integrating the MMTEG, a power managing circuit, a storage element, and an IoT Bluetooth beacon. The electric energy from the MMTEG device enabled continuous operation of a beacon device, and we successfully confirmed the accurate location of the installed wireless positioning system, subsequently resulting in transmission of our indoor position to the main monitoring computer. Lastly, the MMTEG generated an open-circuit Vpp and a short-circuit current of 330 V and 23 μA, respectively, near a 60 Hz power cable connected to home appliances, which were large enough to turn on 108 blue light emitting diodes (LEDs).
- 29 October 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (12)
Finite-difference time-domain analysis of local electric field enhancement by nanoholes of varying shape and diameter in metal with different thicknesses
This work reports changes in surface plasmons according to the shape and diameter of nanoholes in thin metal films of varying thickness. Cylindrical and reversed trapezoidal nanoholes were simulated using the finite-difference time-domain (FDTD) method. Nanoholes of 10, 50, and 100 nm diameters were modelled in 40-, 60-, and 80-nm-thick metal films. The strongest local electric field enhancement occurred with a reversed trapezoidal hole of 10 nm size in a 100-nm-thick metal film. The resonance wavelength was red shifted by decreasing the hole size and/or increasing the metal film thickness.
- 29 October 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (12)
Finite-difference time-domain analysis of local electric field enhancement by nanoholes of varying shape and diameter in metal with different thicknesses
This work reports changes in surface plasmons according to the shape and diameter of nanoholes in thin metal films of varying thickness. Cylindrical and reversed trapezoidal nanoholes were simulated using the finite-difference time-domain (FDTD) method. Nanoholes of 10, 50, and 100 nm diameters were modelled in 40-, 60-, and 80-nm-thick metal films. The strongest local electric field enhancement occurred with a reversed trapezoidal hole of 10 nm size in a 100-nm-thick metal film. The resonance wavelength was red shifted by decreasing the hole size and/or increasing the metal film thickness.