SSShishobhan Sharma

Shishobhan Sharma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shishobhan Sharma has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Novel carbon foam composites reinforced with carbon fiber felt developed from inexpensive pitch precursor matrix

    by Shishobhan Sharma, Rasmika H Patel

    Novel carbon foam composites derived from various pitch precursors have been fabricated and characterized. This paper specifically focuses on developing an effective process for fabricating the carbon foam composites from Polyacrylonitrile (PAN)-based carbon felt as a reinforcement and various readily available pitch matrix such as petroleum pitch, coal tar pitch, and mesophase pitch. The paper endeavors to develop the carbon foam composites and to carry out detailed morphological, thermal, and mechanical characterization. Traditional carbon foams have been known to offer poor mechanical performance, and hence, in this paper, the pitch-based carbon foams were innovatively reinforced with the PAN-based carbon fiber felt. Carbon foam composites were subjected to partial oxidation, and their morphological and mechanical response after the heat treatment was studied thoroughly. Thermal gravimetric analysis and thermal mechanical analysis techniques reveal an appreciable thermo-physical and thermo-mechanical response at elevated temperatures. Also, it was found out that the factors such as volatile content and quinoline insoluble fraction affect the morphology as well as the physical robustness on the composite foams.


  • Comparative study on the carbon–carbon composites developed from petroleum pitch, coal tar pitch, and their mixture

    by Shishobhan Sharma, Rasmika H Patel, Bharat K Patel

    Carbon–carbon composites, as developed from various pitch precursors and chopped carbon fiber reinforcement, have been characterized and compared on the prime basis of the precursor materials used as the matrix. Evaluation of the properties and characterization have been carried out by various techniques such as thermal analysis by thermogravimetric analysis, thermomechanical analysis, and flame ablation method, microstructural characterization by scanning electron microscopy and optical microscope, mechanical characterization by Universal Testing Machine (UTM), IZOD impact, and hardness and frictional characterization by a pin on disc tribometer were carried out. Petroleum pitch, coal tar pitch, and the mixture of both the kinds of the pitch have shown a difference in the ultimate properties on the finished composite materials. The presence of volatiles, quinoline insoluble content, and various softening point have proved to impart differences in behavior for different systems. Composites developed to form the three systems have shown robust characteristics with superior mechanical and thermal behavior. Microstructural analysis has shown good compatibility between the reinforcement and matrix, while it is also evidence of a uniform distribution of the reinforcement. The fiber–matrix interaction in all the three systems is appreciably weak, which is favorable for non-catastrophic failure.


  • Open Access

    Friction and wear characteristics of robust carbon-carbon composites developed solely from petroleum pitch without reimpregnation

    by Shishobhan Sharma, Bharat Patel, Rasmika Patel

    Friction and wear characteristics correlating the fiber reinforcement percentage of carbon-carbon (C/C) composites solely developed from petroleum pitch matrices were investigated. This study exhibits the tribo-characteristics of C/C composites developed in a single-step carbonization process for varying loads for the first time without a reimpregnation process. A pin-on-disc tribometer with a sliding speed of 0.5 m/s and loads of 5, 10, and 20 N with a flat tool grade stainless steel pin as a static partner was employed. Further, polarized light optical and scanning electron microscopes (SEM) were utilized for a morphological analysis. Elastic modulus and strength were determined by a compression test. A result analysis is conducted to analyze sliding wear accompanied with minor abrasion. The composites with a high percentage of reinforcement exhibit credible wear resistance and mechanical robustness.


  • Effect of hybrid reinforcement of carbon fiber and stable particles on pitch based carbon carbon composites

    by Shishobhan Sharma, Rasmika H Patel, Bharat K Patel

    Carbon matrix carbon (c/c) composites were investigated to study the effect of incorporating stable particulate reinforcement along with chopped carbon fibers to check the effect of hybrid reinforcement. Robust c/c composites were fabricated by isotropic petroleum pitch matrix in single-step carbonization without re-impregnation process. Dense and rigid composites with density ranging from 1.65-1.75 g/cm3 were developed. Distinctive properties comprising coefficient of friction, coefficient of thermal expansion, high temperature dimensional and weight stability, shrinkage, hardness, weight loss, breaking energy and compressive strength were assessed and compared with the reference c/c composite. Secondary stable additives such as silicon carbide, molybdenum di-silicide, graphite, CNT, fly ash and alumina were added 5% by weight in the composites. Specimens containing advanced ceramic particles showed appreciable improvement in hardness, thermal, and mechanical response while composites with fly ash and graphite addition showed the converse effects. From the research, we were able to alter the properties and tailor them according to the application such as compression and friction coefficient was improved to have application in brake discs for automobiles. Also, the thermal shielding has been improved by incorporating thermally dormant material such as fly ash and Incorporation of hard and stable reinforcement has brought about noticeable changes consequently hybrid reinforcement improved the overall performance of the material even after ablation in oxy-acetylene flames.


  • Fabrication and characterization of high impact hybrid matrix composites from thermoset resin and dyneema-glass fabric reinforcement

    by R. H. Patel, S. Sharma, T. Pansuriya, E. V. Malgani, V. Sevkani

    Hybrid composites have been fabricated by hand lay-up technique with epoxy resin and diethylene tri amine as a hardener for high impact energy absorption with sandwich stacking of different reinforcements of dyneema and glass fabric. High impact grade composites are nowadays gaining a lot of importance in the field of high mechanical load bearing applications, ballistics and bulletproofing. The present work emphases on the fabrication and mechanical properties of the hybrid composites of cut resistant dyneema fabric along with glass fabric reinforced in the thermosetting resin. i.e. epoxy. The prime importance while fabricating such materials have been given to the processing along with selection of the raw materials. High impact resistive materials with low density and henceforth low weight have been manufactured and characterized by IZOD impact tester, UTM, Archimedes density meter and SEM. Throughout the work, satisfactory results have been obtained. Impact resistance was observed to be boosted three times as that of the reference sample of glass fabric and epoxy. The density of the hybrid composite is observed to be 25% as that of the reference sample.