RFRonald Fisch
Ronald Fisch
*This is an algorithmically generated author record based on publicly available information.
Research Subjects
Research Interests
Ronald Fisch has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
A. B. Harris
Department of Physics, University of Pennsylvania, Philadelphia, Pennsylvania 19104
3 shared publications- Alexander H. Hartmann
Institute of Theoretical Physics, University of Goettingen, Germany
2 shared publications P. A. Fedders
Department of Physics, Washington University, St. Louis, Missouri 63130
1 shared publicationR. E. Norberg
Department of Physics, Washington University, St. Louis, Missouri 63130
1 shared publication
Latest Publications
- 3 January 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 105 (1) , 014102
Random-field critical scaling in a model of dipolar glass and relaxor ferroelectric behavior
Heat-bath Monte Carlo simulations have been used to study a 12-state discretized Heisenberg model with a type of random field on simple cubic lattices of size . The 12 states correspond to the [110] directions of a cube. The model has the standard nonrandom two-spin exchange term with coupling energy and a random field which consists of adding an energy to two of the 12 spin states, chosen randomly and independently at each site. We report on the case , which has a sharp phase transition at about . Below , the model has long-range ferroelectric order oriented along one of the eight [111] directions. At , the behavior of the peak in the structure factor, , at small is a straight line on a log-log plot, which gives the result . The onset of orientational order below is very rapid for this value of . There are peaks in the specific heat and longitudinal susceptibility at . Below there is a strong correction to ordinary scaling, which is probably caused by the cubic anisotropy, which is a dangerous irrelevant variable.- 3 January 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 105 (1) , 014102
Random-field critical scaling in a model of dipolar glass and relaxor ferroelectric behavior
Heat-bath Monte Carlo simulations have been used to study a 12-state discretized Heisenberg model with a type of random field on simple cubic lattices of size . The 12 states correspond to the [110] directions of a cube. The model has the standard nonrandom two-spin exchange term with coupling energy and a random field which consists of adding an energy to two of the 12 spin states, chosen randomly and independently at each site. We report on the case , which has a sharp phase transition at about . Below , the model has long-range ferroelectric order oriented along one of the eight [111] directions. At , the behavior of the peak in the structure factor, , at small is a straight line on a log-log plot, which gives the result . The onset of orientational order below is very rapid for this value of . There are peaks in the specific heat and longitudinal susceptibility at . Below there is a strong correction to ordinary scaling, which is probably caused by the cubic anisotropy, which is a dangerous irrelevant variable.- 19 June 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 101 (6) , 062134
Behavior of the random-field model on simple cubic lattices atWe have performed studies of the three-dimensional random-field model on 32 samples of simple cubic lattices with periodic boundary conditions, with a random field strength of = 1.5, for 128, using a parallelized Monte Carlo algorithm. We present results for the sample-averaged magnetic structure factor over a range of temperature, using both random hot start and ferromagnetic cold start initial states, and along the [1,0,0] and [1,1,1] directions. At 1.875, shows a broad peak near , with a correlation length which is limited by thermal fluctuations, rather than the lattice size. As is lowered, this peak grows and sharpens. By 1.5, it is clear that the correlation length is larger than 128. The lowest temperature for which was calculated is 1.421875, where the hot start and cold start initial conditions usually do not find the same local minimum in the phase space. Our results are consistent with the idea that there is a finite value of below which diverges slowly as goes to zero. This divergence would imply that the relaxation time of the spins is also diverging. That is the signature of an ergodicity-breaking phase transition.- 19 June 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 101 (6) , 062134
Behavior of the random-field model on simple cubic lattices atWe have performed studies of the three-dimensional random-field model on 32 samples of simple cubic lattices with periodic boundary conditions, with a random field strength of = 1.5, for 128, using a parallelized Monte Carlo algorithm. We present results for the sample-averaged magnetic structure factor over a range of temperature, using both random hot start and ferromagnetic cold start initial states, and along the [1,0,0] and [1,1,1] directions. At 1.875, shows a broad peak near , with a correlation length which is limited by thermal fluctuations, rather than the lattice size. As is lowered, this peak grows and sharpens. By 1.5, it is clear that the correlation length is larger than 128. The lowest temperature for which was calculated is 1.421875, where the hot start and cold start initial conditions usually do not find the same local minimum in the phase space. Our results are consistent with the idea that there is a finite value of below which diverges slowly as goes to zero. This divergence would imply that the relaxation time of the spins is also diverging. That is the signature of an ergodicity-breaking phase transition.- Open AccessBehavior of the Random Field $XY$ Model on Simple Cubic Lattices at $h_r = 1.5$We have performed studies of the 3D random field $XY$ model on 32 samples of $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.5, for $L =$ 128, using a parallelized Monte Carlo algorithm. We present results for the sample-averaged magnetic structure factor, $S (\vec{\bf k})$ over a range of temperature, using both random hot start and ferromagnetic cold start initial states, and $\vec{\bf k}$ along the [1,0,0] and [1,1,1] directions. At $T =$ 1.875, $S (\vec{\bf k})$ shows a broad peak near $|\vec{\bf k}| = 0$, with a correlation length which is limited by thermal fluctuations, rather than the lattice size. As $T$ is lowered, this peak grows and sharpens. By $T =$ 1.5, it is clear that the correlation length is larger than $L =$ 128. The lowest temperature for which $S (\vec{\bf k})$ was calculated is $T =$ 1.421875, where the hot start and cold start initial conditions are usually not finding the same local minimum in the phase space. Our results are consistent with the idea that there is a finite value of $T$ below which $S (\vec{\bf k})$ diverges slowly as $|\vec{\bf k}|$ goes to zero. This divergence would imply that the relaxation time of the spins is also diverging. That is the signature of an ergodicity-breaking phase transition.Open AccessBehavior of the Random Field $XY$ Model on Simple Cubic Lattices at $h_r = 1.5$We have performed studies of the 3D random field $XY$ model on 32 samples of $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.5, for $L =$ 128, using a parallelized Monte Carlo algorithm. We present results for the sample-averaged magnetic structure factor, $S (\vec{\bf k})$ over a range of temperature, using both random hot start and ferromagnetic cold start initial states, and $\vec{\bf k}$ along the [1,0,0] and [1,1,1] directions. At $T =$ 1.875, $S (\vec{\bf k})$ shows a broad peak near $|\vec{\bf k}| = 0$, with a correlation length which is limited by thermal fluctuations, rather than the lattice size. As $T$ is lowered, this peak grows and sharpens. By $T =$ 1.5, it is clear that the correlation length is larger than $L =$ 128. The lowest temperature for which $S (\vec{\bf k})$ was calculated is $T =$ 1.421875, where the hot start and cold start initial conditions are usually not finding the same local minimum in the phase space. Our results are consistent with the idea that there is a finite value of $T$ below which $S (\vec{\bf k})$ diverges slowly as $|\vec{\bf k}|$ goes to zero. This divergence would imply that the relaxation time of the spins is also diverging. That is the signature of an ergodicity-breaking phase transition.
- Open AccessBeyond the Imry-Ma Length: Scaling Behavior in the 3D Random Field $XY$ ModelWe have performed studies of the 3D random field $XY$ model on $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.875, for $L =$ 64, 96 and 128, using a parallelized Monte Carlo algorithm. We present results for the angle-averaged magnetic structure factor, $S ( k )$ at $T$ = 1.00, which appears to be the temperature at which small jumps in the magnetization per spin and the energy per spin occur. The magnetization jump per spin scales with size roughly as $L^{- 3/4}$, while the energy jump per spin scales like $L^{- 3/2}$. The results also indicate the existence of an approximately logarithmic divergence of $S ( k )$ as $k \to 0$. The magnetic susceptibility, $\chi (\vec{\bf k} = 0 )$, on the other hand, seems to have a value of about 14.2 under these conditions. This suggests the absence of a ferromagnetic phase, and that the lower critical dimension for long-range order in this model is three. Similar results are found for $L$ = 64 samples at $h_r$ = 2.0 and $T$ = 0.875. We expect that the behavior is qualitatively similar along the entire phase boundary, but the scaling exponents may not be universal. These results appear to be related to recent work on quantum disorder.Open AccessBeyond the Imry-Ma Length: Scaling Behavior in the 3D Random Field $XY$ ModelWe have performed studies of the 3D random field $XY$ model on $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.875, for $L =$ 64, 96 and 128, using a parallelized Monte Carlo algorithm. We present results for the angle-averaged magnetic structure factor, $S ( k )$ at $T$ = 1.00, which appears to be the temperature at which small jumps in the magnetization per spin and the energy per spin occur. The magnetization jump per spin scales with size roughly as $L^{- 3/4}$, while the energy jump per spin scales like $L^{- 3/2}$. The results also indicate the existence of an approximately logarithmic divergence of $S ( k )$ as $k \to 0$. The magnetic susceptibility, $\chi (\vec{\bf k} = 0 )$, on the other hand, seems to have a value of about 14.2 under these conditions. This suggests the absence of a ferromagnetic phase, and that the lower critical dimension for long-range order in this model is three. Similar results are found for $L$ = 64 samples at $h_r$ = 2.0 and $T$ = 0.875. We expect that the behavior is qualitatively similar along the entire phase boundary, but the scaling exponents may not be universal. These results appear to be related to recent work on quantum disorder.
- Open AccessScaling Behavior in the 3D Random Field $XY$ ModelWe have performed studies of the 3D random field $XY$ model on $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.875, for $L = 64$ and $L = 96$, using a parallelized Monte Carlo algorithm. We present results for the angle-averaged magnetic structure factor, $S ( k )$ at $T = 1.00$, which appears to be the temperature at which small jumps in the magnetization per spin and the energy per spin occur. The results indicate the existence of an approximately logarithmic divergence of $S ( k )$ as $k \to 0$. This suggests that the lower critical dimension for long range order in this model is three.Open AccessScaling Behavior in the 3D Random Field $XY$ ModelWe have performed studies of the 3D random field $XY$ model on $L \times L \times L$ simple cubic lattices with periodic boundary conditions, with a random field strength of $h_r$ = 1.875, for $L = 64$ and $L = 96$, using a parallelized Monte Carlo algorithm. We present results for the angle-averaged magnetic structure factor, $S ( k )$ at $T = 1.00$, which appears to be the temperature at which small jumps in the magnetization per spin and the energy per spin occur. The results indicate the existence of an approximately logarithmic divergence of $S ( k )$ as $k \to 0$. This suggests that the lower critical dimension for long range order in this model is three.
- Open AccessGlassy Freezing and Long-Range Order in the 3D Random Field $XY$ ModelMonte Carlo studies of the 3D random field $XY$ model on simple cubic lattices of size $64^3$, using two different isotropic random-field probability distributions of moderate strength, show a glassy freezing behavior above $T_c$, and long-range order below $T_c$, consistent with our earlier results for weaker and stronger random fields. This model should describe random pinning in vortex lattices in type-II superconducting alloys, charge-density wave materials, and decagonal quasicrystals.Open AccessGlassy Freezing and Long-Range Order in the 3D Random Field $XY$ ModelMonte Carlo studies of the 3D random field $XY$ model on simple cubic lattices of size $64^3$, using two different isotropic random-field probability distributions of moderate strength, show a glassy freezing behavior above $T_c$, and long-range order below $T_c$, consistent with our earlier results for weaker and stronger random fields. This model should describe random pinning in vortex lattices in type-II superconducting alloys, charge-density wave materials, and decagonal quasicrystals.
- 24 June 2009
- Published by American Physical Society (APS) in Physical Review B
- Vol. 79 (21) , 214429
Finite-size scaling critical behavior of randomly pinned spin-density waves
We have performed Monte Carlo studies of the three-dimensional model with random uniaxial anisotropy, which is a model for randomly pinned spin-density waves. We study simple cubic lattices using values in the range 16–64, and with random anisotropy strengths of , 2, 3, 6, and . There is a well-defined finite-temperature critical point, , for each of these values of . We present results for the angle-averaged magnetic structure factor at for . We also use finite-size scaling analysis to study scaling functions for the critical behavior of the specific heat, the magnetization, and the longitudinal magnetic susceptibility. Good data collapse of the scaling functions over a wide range of is seen for and . For our finite values of the scaled magnetization function increases with below and appears to approach an -independent limit for large . This suggests that the system is ferromagnetic below .- 24 June 2009
- Published by American Physical Society (APS) in Physical Review B
- Vol. 79 (21) , 214429
Finite-size scaling critical behavior of randomly pinned spin-density waves
We have performed Monte Carlo studies of the three-dimensional model with random uniaxial anisotropy, which is a model for randomly pinned spin-density waves. We study simple cubic lattices using values in the range 16–64, and with random anisotropy strengths of , 2, 3, 6, and . There is a well-defined finite-temperature critical point, , for each of these values of . We present results for the angle-averaged magnetic structure factor at for . We also use finite-size scaling analysis to study scaling functions for the critical behavior of the specific heat, the magnetization, and the longitudinal magnetic susceptibility. Good data collapse of the scaling functions over a wide range of is seen for and . For our finite values of the scaled magnetization function increases with below and appears to approach an -independent limit for large . This suggests that the system is ferromagnetic below .- Open Access
Finite-Size Scaling Critical Behavior of Randomly Pinned Spin-Density Waves
We have performed Monte Carlo studies of the 3D $XY$ model with random uniaxial anisotropy, which is a model for randomly pinned spin-density waves. We study $L \times L \times L$ simple cubic lattices, using $L$ values in the range 16 to 64, and with random anisotropy strengths of $D / 2 J$ = 1, 2, 3, 6 and $\infty$. There is a well-defined finite temperature critical point, $T_c$, for each these values of $D / 2 J$. We present results for the angle-averaged magnetic structure factor, $S (k)$ at $T_c$ for $L = 64$. We also use finite-size scaling analysis to study scaling functions for the critical behavior of the specific heat, the magnetization and the longitudinal magnetic susceptibility. Good data collapse of the scaling functions over a wide range of $T$ is seen for $D / 2 J$ = 6 and $\infty$. For our finite values of $D / 2 J$ the scaled magnetization function increases with $L$ below $T_c$, and appears to approach an $L$-independent limit for large $L$. This suggests that the system is ferromagnetic below $T_c$.Open AccessFinite-Size Scaling Critical Behavior of Randomly Pinned Spin-Density Waves
We have performed Monte Carlo studies of the 3D $XY$ model with random uniaxial anisotropy, which is a model for randomly pinned spin-density waves. We study $L \times L \times L$ simple cubic lattices, using $L$ values in the range 16 to 64, and with random anisotropy strengths of $D / 2 J$ = 1, 2, 3, 6 and $\infty$. There is a well-defined finite temperature critical point, $T_c$, for each these values of $D / 2 J$. We present results for the angle-averaged magnetic structure factor, $S (k)$ at $T_c$ for $L = 64$. We also use finite-size scaling analysis to study scaling functions for the critical behavior of the specific heat, the magnetization and the longitudinal magnetic susceptibility. Good data collapse of the scaling functions over a wide range of $T$ is seen for $D / 2 J$ = 6 and $\infty$. For our finite values of $D / 2 J$ the scaled magnetization function increases with $L$ below $T_c$, and appears to approach an $L$-independent limit for large $L$. This suggests that the system is ferromagnetic below $T_c$. - Open Access
- 28 December 2007
- Published by American Physical Society (APS) in Physical Review B
- Vol. 76 (21) , 214435
Structure factor of the three-dimensional random-fieldmodel: Monte Carlo calculationsWe have performed Monte Carlo studies of the three-dimensional random-field model on simple cubic lattices, with random-field strengths of and 2. We present results for the angle-averaged magnetic structure factor at . Our results appear to indicate a phase transition into a ferromagnetic state. This is made possible by the existence of a Griffiths singularity. It appears that at the phase transition, jumps to zero discontinuously, with a latent heat which is probably subextensive.- 28 December 2007
- Published by American Physical Society (APS) in Physical Review B
- Vol. 76 (21) , 214435
Open AccessStructure factor of the three-dimensional random-fieldmodel: Monte Carlo calculationsWe have performed Monte Carlo studies of the three-dimensional random-field model on simple cubic lattices, with random-field strengths of and 2. We present results for the angle-averaged magnetic structure factor at . Our results appear to indicate a phase transition into a ferromagnetic state. This is made possible by the existence of a Griffiths singularity. It appears that at the phase transition, jumps to zero discontinuously, with a latent heat which is probably subextensive. - Open Access
Structure Factor of the 3D Random Field XY Model
We have performed Monte Carlo studies of the 3D random field XY model on $L \times L \times L$ simple cubic lattices, with random field strengths of $h_r$ = 1 and 2. We present results for the angle-averaged magnetic structure factor, $S (k)$ at $L = 64$. Our results appear to indicate a phase transition into a ferromagnetic state. This is made possible by the existence of a Griffiths singularity. It appears that at the phase transition $M^2$ jumps to zero discontinuously, with a latent heat which is probably subextensive.Open AccessStructure Factor of the 3D Random Field XY Model
We have performed Monte Carlo studies of the 3D random field XY model on $L \times L \times L$ simple cubic lattices, with random field strengths of $h_r$ = 1 and 2. We present results for the angle-averaged magnetic structure factor, $S (k)$ at $L = 64$. Our results appear to indicate a phase transition into a ferromagnetic state. This is made possible by the existence of a Griffiths singularity. It appears that at the phase transition $M^2$ jumps to zero discontinuously, with a latent heat which is probably subextensive.