JDJonathan R. Delph

Jonathan R. Delph

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jonathan R. Delph has a total of 170 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Seismic Reflection Profiling at the Kentland Impact Structure, Indiana: Geophysical Characterization of Impact Induced Damage

    by Brian A. Robitaille, Douglas R. Schmitt, Christoph Büttner, Jonathan R. Delph, Stefan Buske

    The Kentland Impact Structure is a classic complex crater whose central peak is exposed in an active quarry in NW Indiana, USA. However, its diameter has remained poorly constrained due to the thick glacial sediment cover. Newly obtained seismic reflection profile images combined with refraction seismic tomography, earlier gravity surveying, and shallow drilling reveal the crater's rim faults to be at a radius of ∼4.3 km from the central peak. Evidence for the rim faults include a gravity low, dipping wedges of low velocity and reflective subcropping siliclastics underlain by a deeper highly scattering zone underneath. The rock mass on either side of the fault zone displays coherent horizontal reflections but is populated by numerous diffraction patterns indicative of damage with dimensions below the spatial resolution limits of the survey. The seismic wave speeds remain higher than expected in these strata, indicating a lack of microscopic damage in the rock matrix. The seismic profiles together with the significant positive Bouguer gravity anomaly may further suggest that zones with siliclastics deform differently than underlying carbonate formations with a potential for shock compaction. This rare structural information should be useful in constraining existing impact models.

  • Open Access

    The CRESCENT Generation 0 Cascadia Community Velocity Model: Constraints From the Joint Inversion of Teleseismic Receiver Functions and Ambient Noise Data

    by Bin He, Jonathan R. Delph, Shihan Wu, Emilie E. E. Hooft, Alex Grant, Valerie J. Sahakian, Pieter‐Ewald Share, William J. Stephenson, Erin A. Wirth, Brandon Herr, et al.

    The Cascadia subduction zone can produce M 9+ megathrust and M 6.5+ intraplate earthquakes, motivating the need for a detailed 3‐D model of seismic properties at scales relevant to regional geology, basins, and infrastructure. To construct the Generation 0 Cascadia Region Earthquake Science Center Community Velocity Model (CRESCENT CVM), we jointly invert ∼20 years of teleseismic P‐wave radial receiver functions and 6–50 s Rayleigh‐wave phase velocities from ambient‐noise correlations recorded by ∼2,300 onshore and offshore stations. Using a Bayesian framework, we build a pseudo‐3‐D shear‐wave velocity model with associated uncertainties. The model spans central California to southern British Columbia (∼36 to 52N) and the Juan de Fuca–Pacific Plate boundary to eastern limit of major neotectonic deformation (∼131 to 111W), with major boundaries resolved at ∼20 km laterally. Our model recovers previously observed slow velocities of the Franciscan terrane, Central Valley, and Yakima Basin juxtaposed with fast velocities of Klamath and Siletzia terranes, Sierra Nevada Batholith, and Ancestral Cascade Range at upper crustal depths (<10 km). At greater depth, we recover low‐velocity zones in the lower crust beneath the Klamath terrane and Olympic Mountains, high‐velocities extending to the base of the crust below the Siletzia terrane, and pervasive back‐arc low velocity zones. Velocity uncertainties are largest at shallow depths (∼5 km) and near the crust‐mantle transition ‐ regions that could be the focus of improvement in future CVMs. This model can serve as a starting point for future models that incorporate full waveform inversion and higher frequency data sets to better constrain seismic hazard.

  • Open Access

    The Cascadia Region Earthquake Science Center (CRESCENT): Regional Science in a Resilience Context

    by Valerie J. Sahakian, Andrew J. Meigs, Andy Clifford, Shannon Fasola, Diego Melgar, Amanda M. Thomas, Pieter-Ewald Share, Harold Tobin, Tim Melbourne, Jill Elizabeth, et al.

    The Cascadia subduction zone poses significant risks to the Pacific Northwest, from shaking, tsunami inundation, and cascading hazards. Among the challenges to improving resilience are the effects of a less mature “earthquake culture” than other seismically active regions (in science and preparedness) and gaps in the workforce (in community representation and technical training). The Cascadia Region Earthquake Science Center (CRESCENT) has been established to address these challenges through research, education, and community engagement. By integrating scientific studies, fostering collaboration, and leveraging new technologies, CRESCENT seeks to improve hazard assessment and resilience in the region. This article outlines the novel regional framework for how the center’s structure provides science-to-practice approaches for equitable and inclusive workforce development, societal preparedness, and seismic resilience. This framework draws on existing models of codesigned research to propose an academic-regional partnership model that may be applicable to future endeavors.


  • Open Access

    The Cascadia Region Earthquake Science Center (CRESCENT): Advancing Understanding of Cascadia’s Earthquake Hazards

    by Diego Melgar, Amanda M. Thomas, Valerie Sahakian, Pieter-Ewald Share, Andrew Meigs, Harold Tobin, Lydia Staisch, Timothy Melbourne, Jill Elizabeth, Rasheed Ajala, et al.

    The Cascadia subduction zone (CSZ) is capable of producing large megathrust earthquakes and tsunamis, posing substantial risks to the Pacific Northwest. This article examines the seismic characteristics of the CSZ, including its offshore coupling, sparse seismicity, and a complex paleoseismic record. Recent advances in geophysical methods and data collection have improved our understanding of subduction zone processes, but important uncertainties remain regarding rupture dynamics, ground shaking, and tsunami impacts. The Cascadia Region Earthquake Science Center (CRESCENT) has been established to address these challenges through coordinated research, education, and community engagement. By integrating scientific studies, fostering collaboration, and leveraging new technologies, CRESCENT seeks to improve hazard assessment and resilience in the region. This article outlines the primary challenges and opportunities for advancing subduction-zone science and supporting societal preparedness for future CSZ events.


  • Open Access

    Rheologic controls on the depth dependence of megathrust earthquakes

    by Melodie E. French, Jonathan R. Delph, Cailey B. Condit

    The various slip behaviors of the subduction megathrust fault, including deadly megathrust earthquakes, are depth-dependent. Yet, we do not know what causes this depth dependence, in part due to variability between subduction zone thermal structures and lithological inputs. Here, we investigate controls on the nucleation depths of great earthquakes (Mw ≳ 8) and the deeper extent of seismogenesis. To do so, we create rheologic strength envelopes for six subduction zones using published constitutive relations for subducting lithologies and regional thermal models. We then compare the strength envelopes to local plate interface earthquake depths. Our synthesis shows that subducted sediments undergo a transition from frictional to predominantly viscous deformation near 300 ± 60 ° C a transition that correlates with the maximum nucleation depths of great earthquakes at 20 to 30 km. However, smaller plate interface earthquakes ( 5 ≤ Mw < 8) continue to nucleate below this depth, and the maximum earthquake size decreases until the base of the seismogenic zone at 40 to 60 km depth and ∼ 500 °C. We evaluate potential causes of seismicity below the onset of viscous deformation in these now metasediments, and conclude that the presence of lithologic heterogeneities that are loaded to frictional failure by viscously deforming metasediments is most plausible. Thus, we propose that great earthquakes can nucleate and grow into large events where all lithologies are frictional. However, the base of the seismogenic zone is deeper than the onset of viscous deformation in metasediments, which limits the growth of earthquakes into large events, and here seismicity reflects the existence and size of heterogeneity along the plate interface.


  • Open Access

    Cascadia Subduction Zone Science: Call for the Next Generation Community Seismic Velocity Model

    by Valerie J. Sahakian, Asif Ashraf, Charity Mann, Pieter-Ewald Share, Rasheed Ajala, Jonathan R. Delph, Bin He, Emilie E. E. Hooft, Alex Grant, William Stephenson, et al.

    The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three-dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground-motion estimation. In May 2024, the National Science Foundation-funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along-strike and along-dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground-motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

  • Open Access

    Influence of Subduction Interface Geometry on Surface Displacements and Slip Processes in Cascadia

    by H. M. Elston, J. P. Loveless, J. R. Delph

    The subduction interface geometry is particularly important for estimating interplate coupling and surface geodetic motion, which has significant implications for seismic hazard mapping. Several published Cascadia subduction interface geometries derived from different seismic data sets vary significantly from one another. However, results from deformation models that use the different interface geometries are rarely systematically compared. Here, we assess the impact of subduction interface geometry on surface motion predictions, slip inversion results, and interface coupling estimates from four published Cascadia subduction interface geometries. We isolate the effect of the interface geometry on the predicted surface motion by applying uniform unit slip or Gaussian slip patterns to each interface geometry and calculate the predicted displacements at locations of GNSS stations. The forward model‐predicted horizontal displacements can differ by >20% and show azimuthal differences up to 10°; such differences correlate spatially to geometric differences amongst the interface realizations. Inversions of surface displacements estimated using a Gaussian distribution of slip, mimicking an earthquake, recover the applied slip distribution with differing spatial patterns and residuals of up to 38% of the maximum applied slip. Block models that use the four interface realizations produce coupling estimates on the interface with regions of significant coupling (>50%) that differ noticeably in down‐dip extent and lateral continuity. The results we present suggest that models utilizing interface geometry as an input, such as earthquake and tsunami models, should consider comparing models with differing interface geometries to critically evaluate model uncertainty stemming from this fundamental input.


  • Open Access

    Deep lithospheric controls on the formation and evolution of the East Anatolian Fault Zone and Anatolia-Arabia-Africa Triple Junction

    by Jonathan Delph, Michael Darin, Donna Whitney, Michael Cosca, Christian Teyssier, Tuna Eken, Nuretdin Kaymakci, Mary Reid, Susan Beck

    The North and East Anatolian Fault Zones represent plate-bounding transform faults that enable the westward tectonic escape of the Anatolian Plate away from the Arabian-Eurasian collisional zone. These fault zones are both capable of hosting large (Mw > 7) seismic events, as most recently demonstrated by the extremely damaging February 2023 Kahramanmaraş earthquake sequence. This earthquake sequence highlighted that plate boundary forces in this area are distributed over a very broad region, however what controls the location, distribution, and character of this plate-bounding strike-slip system remains enigmatic. To better understand potential contributions to deformation, we compare seismic images of the lithosphere (e.g., crustal and lithospheric mantle thickness and velocity) to deformational features and seismicity near the EAFZ, as well as further west where it joins with the Anatolia-Arabia-Africa (A3) triple junction along the southeastern margin of the Anatolian escape system. We interpret that although controls on surface deformation are commonly linked to stress in the brittle upper crust, the complex deformation and seismicity patterns in this region are likely related to variations in the location and extent of the strong lithospheric mantle of the Arabian plate, which currently underthrusts Anatolia as far north as the Sürgü-Çardak fault zone (~50 km). In addition, the Arabian lithospheric mantle extends at least as far west as at least the central Adana Basin, coincident with a zone of relatively deep (>30 km) strike-slip seismogenesis that has produced Mw > 6 earthquakes. By investigating the relationship between recent geological deformation since the inception of the East Anatolian Fault (ca. 5 Ma) and the modern record of seismic structure and seismicity, we infer that the Sürgü-Çardak fault zone and its associated near-orthogonal bend reaching into the Adana Basin will be the future southeastern boundary of the Anatolian Plate escape tectonic system.

  • Open Access

    The Seismic Expression and Tectonomagmatic Evolution of Subduction Termination along the Anatolian Margin 

    by Jonathan Delph, Mary Reid, Daniel Portner, Susan Beck, A. Arda Ozacar, W. Kirk Schleiffarth, Michael Darin, Donna Whitney, Michael Cosca, Christian Teyssier, et al.

    The geological expression of subduction termination is poorly understood due to overprinting during the collisional stage of the Wilson Cycle. The Anatolian domain of the eastern Mediterranean represents a modern system where spatial variability can be interpreted in terms of the transition from subduction to collision. Convergence in the west is accommodated by the subduction of the last remnants of Neotethyan oceanic lithosphere, while in the east, the margin has transitioned to complete continent-continent collision. In central Anatolia, however, the expression of convergence is complicated by the underthrusting of small continental fragments and attenuated continental lithosphere. By investigating variations in the geological expression of convergence across this system, we can investigate the processes that accompany the transition from subduction to collision.Spatially variable tectonomagmatic and seismic characteristics along the Anatolian margin reflect this transition. Seismic images reveal a disjointed and disaggregating subducting slab beneath central Anatolia that interacts with, and in some cases induces, mantle flow. This spatially corresponds with Miocene-to-recent volcanism that is sourced from very shallow depths (

  • Open Access

    Validation of Ps‐P Tomography for Obtaining 3D Crustal VP/VS With Small‐N Data Sets: An Application to the Mount St. Helens Magmatic System

    by Daniel Evan Portner, Jonathan R. Delph, Eric Kiser, Geoffrey A. Abers, Alan Levander, Guanning Pang

    The high sensitivity of VP/VS to the presence of melt makes images of VP/VS structure particularly useful in magmatic systems, but detailed three‐dimensional models of VP/VS structure in magmatic systems are often restricted to the upper crust where there is a concentration of seismic sources used for imaging. Ps‐P tomography is a new technique that has been used to image three‐dimensional crustal‐scale variations in VP/VS in regions with limited seismic instrumentation. We apply the Ps‐P tomography technique to a well‐constrained, independently imaged magmatic setting, Mount St. Helens, to outline the efficacy and limitations of this imaging approach. Our Ps‐P tomography model reveals previously imaged high VP/VS upper crustal magma reservoirs beneath active volcanic systems at Mount St. Helens, Mount Adams and the Indian Heaven Volcanic Field and low VP/VS anomalies associated with crystallized plutons. Our model also provides new VP/VS constraints in the lower crust that reveal a high VP/VS anomaly connecting the Mount St. Helens and Mount Adams reservoirs and a low VP/VS anomaly associated with lower crustal cumulates or mafic accreted terranes. Decimation tests further show that first order VP/VS structure is recoverable using as few as four recording seismometers. These images resemble those of independent, higher resolution images from traditional techniques, highlighting the utility of Ps‐P tomography for imaging three‐dimensional variations of VP/VS throughout the crust, including in data‐poor settings or with arrays not designed for structural seismic investigations, such as many volcano monitoring networks.