Jungwan Cho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jungwan Cho has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
Kenneth E. Goodson
Stanford University 1 Department of Mechanical Engineering Stanford, California 94305, USA
16 shared publicationsMehdi Asheghi
Department of Mechanical Engineering, Stanford University, Stanford, CA, 94305, USA
16 shared publicationsDaniel Francis
Element Six Technologies 3 , Santa Clara, California 95054, USA
5 shared publicationsDavid H. Altman
Raytheon Company 4 , Andover, Massachusetts 02451, USA
4 shared publicationsFirooz Faili
4 shared publicationsAditya Sood
3 shared publications
Latest Publications
- Open Access
- 6 November 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
Enhanced breakdown voltage and thermal stability in β-Ga2O3 heterojunction power diodes through Al-NiO alloy engineering
- 6 November 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
Open AccessEnhanced breakdown voltage and thermal stability in β-Ga2O3 heterojunction power diodes through Al-NiO alloy engineering
- 15 February 2026
- Published by Elsevier in Acta Materialia
- Vol. 308
Phonon thermal transport and cooling limits in submicron heteroepitaxial β-Ga2O3 films on SiC
- 15 February 2026
- Published by Elsevier in Acta Materialia
- Vol. 308
Phonon thermal transport and cooling limits in submicron heteroepitaxial β-Ga2O3 films on SiC
- 16 September 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 280
Boiling dynamics in microporous copper-coated manifold microchannels
- 16 September 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 280
Boiling dynamics in microporous copper-coated manifold microchannels
- 8 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (28) , 25860-25869
Etchant-Free Wafer-Scale 2D Transfer and van der Waals 3D Integration via Peel-Off Force Engineering
Clean van der Waals (vdW) contacts are critical for realizing high-performance, reliable devices and integrated circuits based on two-dimensional (2D) transition metal dichalcogenides (TMDs). However, conventional transfer methods that rely on etchants often degrade TMDs, hampering the formation of pristine vdW interfaces. Here, we suggest an etchant-free transfer technique that prevents both direct and indirect damage by precisely controlling the peel-off force (POF) through surface-tension modulation (STM). Guided by a modified Kendall's model, we determine the optimal surface tension for common, nontoxic mixtures of deionized water and ethanol, thereby maximizing the POF. Using this POF-assisted method, we fabricate high-performance 2D vdW field-effect transistors (FETs), integrating device components without etchant-induced damage. These FETs exhibit a field-effect mobility of 162.2 cm2 ·V-1 ·s-1, an on/off ratio exceeding 108, a subthreshold swing of 72 mV·dec-1, and an interface trap density of ∼1012 cm-2·eV-1, demonstrating high-quality vdW contacts. Finally, we suggest the all-vdW logic circuit design, demonstrated through a complementary metal-oxide-semiconductor (CMOS) logic test structure. This work demonstrates a process-compatible approach for the lab-to-fab transition of 2D TMD electronics, achieving reliable device yields and the performance levels required for next-generation vdW-integrated systems.
- 8 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (28) , 25860-25869
Etchant-Free Wafer-Scale 2D Transfer and van der Waals 3D Integration via Peel-Off Force Engineering
Clean van der Waals (vdW) contacts are critical for realizing high-performance, reliable devices and integrated circuits based on two-dimensional (2D) transition metal dichalcogenides (TMDs). However, conventional transfer methods that rely on etchants often degrade TMDs, hampering the formation of pristine vdW interfaces. Here, we suggest an etchant-free transfer technique that prevents both direct and indirect damage by precisely controlling the peel-off force (POF) through surface-tension modulation (STM). Guided by a modified Kendall's model, we determine the optimal surface tension for common, nontoxic mixtures of deionized water and ethanol, thereby maximizing the POF. Using this POF-assisted method, we fabricate high-performance 2D vdW field-effect transistors (FETs), integrating device components without etchant-induced damage. These FETs exhibit a field-effect mobility of 162.2 cm2 ·V-1 ·s-1, an on/off ratio exceeding 108, a subthreshold swing of 72 mV·dec-1, and an interface trap density of ∼1012 cm-2·eV-1, demonstrating high-quality vdW contacts. Finally, we suggest the all-vdW logic circuit design, demonstrated through a complementary metal-oxide-semiconductor (CMOS) logic test structure. This work demonstrates a process-compatible approach for the lab-to-fab transition of 2D TMD electronics, achieving reliable device yields and the performance levels required for next-generation vdW-integrated systems.
- 10 December 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 239
Phonon mean free path analysis in polycrystalline nanostructured thin films
- 10 December 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 239
Phonon mean free path analysis in polycrystalline nanostructured thin films
- 15 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5454-5463
Thermal conductivity of yttria‐stabilized zirconia thin films grown by plasma‐enhanced atomic layer deposition
Zirconia doped with yttrium, widely known as yttria‐stabilized zirconia (YSZ), has found recent applications in advanced electronic and energy devices, particularly when deposited in thin film form by atomic layer deposition (ALD). Although ample studies reported the thermal conductivity of YSZ films and coatings, these data were typically limited to Y2O3 concentrations around 8 mol% and thicknesses greater than 1 μm, which were primarily targeted for thermal barrier coating applications. Here, we present the first experimental report of the thermal conductivity of YSZ thin films (∼50 nm), deposited by plasma‐enhanced ALD (PEALD), with variable Y2O3 content (0–36.9 mol%). Time‐domain thermoreflectance measures the effective thermal conductivity of the film and its interfaces, independently confirmed with frequency‐domain thermoreflectance. The effective thermal conductivity decreases from 1.85 to 1.22 W m−1 K−1 with increasing Y2O3 doping concentration from 0 to 7.7 mol%, predominantly due to increased phonon scattering by oxygen vacancies, and exhibits relatively weak concentration dependence above 7.7 mol%. The effective thermal conductivities of our PEALD YSZ films are higher by ∼15%–128% than those reported previously for thermal ALD YSZ films with similar composition. We attribute this to the relatively larger grain sizes (∼23–27 nm) of our films.
- 15 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5454-5463
Thermal conductivity of yttria‐stabilized zirconia thin films grown by plasma‐enhanced atomic layer deposition
Zirconia doped with yttrium, widely known as yttria‐stabilized zirconia (YSZ), has found recent applications in advanced electronic and energy devices, particularly when deposited in thin film form by atomic layer deposition (ALD). Although ample studies reported the thermal conductivity of YSZ films and coatings, these data were typically limited to Y2O3 concentrations around 8 mol% and thicknesses greater than 1 μm, which were primarily targeted for thermal barrier coating applications. Here, we present the first experimental report of the thermal conductivity of YSZ thin films (∼50 nm), deposited by plasma‐enhanced ALD (PEALD), with variable Y2O3 content (0–36.9 mol%). Time‐domain thermoreflectance measures the effective thermal conductivity of the film and its interfaces, independently confirmed with frequency‐domain thermoreflectance. The effective thermal conductivity decreases from 1.85 to 1.22 W m−1 K−1 with increasing Y2O3 doping concentration from 0 to 7.7 mol%, predominantly due to increased phonon scattering by oxygen vacancies, and exhibits relatively weak concentration dependence above 7.7 mol%. The effective thermal conductivities of our PEALD YSZ films are higher by ∼15%–128% than those reported previously for thermal ALD YSZ films with similar composition. We attribute this to the relatively larger grain sizes (∼23–27 nm) of our films.
- Open Access
Boosting thermal conductivity by surface plasmon polaritons propagating along a thin Ti film
We experimentally demonstrate a boosted in-plane thermal conduction by surface plasmon polaritons (SPPs) propagating along a thin Ti film on a glass substrate. Owing to a lossy nature of metal, SPPs can propagate over centimeter-scale distance even with a supported metal film, and resulting ballistic heat conduction can be quantitatively validated. Further, for a 100-nm-thick Ti film on glass substrate, a significant enhancement of in-plane thermal conductivity compared to bulk value ($\sim 35\%$) is experimentally shown. This study will provide a new avenue to employ SPPs for heat dissipation along a supported thin film, which can be readily applied to mitigate hot-spot issues in microelectronics.
Open AccessBoosting thermal conductivity by surface plasmon polaritons propagating along a thin Ti film
We experimentally demonstrate a boosted in-plane thermal conduction by surface plasmon polaritons (SPPs) propagating along a thin Ti film on a glass substrate. Owing to a lossy nature of metal, SPPs can propagate over centimeter-scale distance even with a supported metal film, and resulting ballistic heat conduction can be quantitatively validated. Further, for a 100-nm-thick Ti film on glass substrate, a significant enhancement of in-plane thermal conductivity compared to bulk value ($\sim 35\%$) is experimentally shown. This study will provide a new avenue to employ SPPs for heat dissipation along a supported thin film, which can be readily applied to mitigate hot-spot issues in microelectronics.
- 6 April 2022
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 191
Fundamental conduction cooling limits for sub-1 µm Ga2O3 devices integrated with diamond
- 6 April 2022
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 191
Fundamental conduction cooling limits for sub-1 µm Ga2O3 devices integrated with diamond
- Open Access
- 16 July 2021
- Published by ASME International
Analysis of Thermal Spreading Resistance of GAN Epilayer in GAN-on-diamond High Electron Mobility Transistors
Gallium nitride (GaN)-on-diamond high-electron-mobility transistors (HEMTs) have recently received significant attention for power electronics applications due to the remarkable heat spreading capability of diamond. A lot of efforts have characterized the thermal properties of GaN-on-diamond HEMTs, including the thermal conductivity of the diamond substrate, as well as the thermal
- 16 July 2021
- Published by ASME International
Open AccessAnalysis of Thermal Spreading Resistance of GAN Epilayer in GAN-on-diamond High Electron Mobility Transistors
Gallium nitride (GaN)-on-diamond high-electron-mobility transistors (HEMTs) have recently received significant attention for power electronics applications due to the remarkable heat spreading capability of diamond. A lot of efforts have characterized the thermal properties of GaN-on-diamond HEMTs, including the thermal conductivity of the diamond substrate, as well as the thermal
- Open Access
- 16 July 2021
- Published by ASME International
Thermal Conductivity Measurement of Yttria-Doped and Undoped Hafnium Zirconium Oxide Dielectrics Thin Films
Hafnium zirconium oxide, alloy of HfO~2~ and ZrO~2~, is promising for a range of applications, such as energy storage and harvesting and electronic memory devices. While a number of studies have studied the dielectric and structural properties of Zr-, Hf-based oxides, less investigated are their thermal properties, in thin-film form in particular. A few prior studies have reported
- 16 July 2021
- Published by ASME International
Open AccessThermal Conductivity Measurement of Yttria-Doped and Undoped Hafnium Zirconium Oxide Dielectrics Thin Films
Hafnium zirconium oxide, alloy of HfO~2~ and ZrO~2~, is promising for a range of applications, such as energy storage and harvesting and electronic memory devices. While a number of studies have studied the dielectric and structural properties of Zr-, Hf-based oxides, less investigated are their thermal properties, in thin-film form in particular. A few prior studies have reported