KGKaikai Guo

Kaikai Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kaikai Guo has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Novel Chiral Modular Stator Design for Ultra-Low Cogging Torque in Permanent Magnet Machines

    by Yongtao Liang, Zaixin Song, Kaikai Guo, Yuan Gao, Hang Zhao

    In high-precision applications, maintaining superior torque stability at zero or near-zero speeds is crucial. However, cogging torque poses a significant challenge to permanent magnet machine (PMM) drive systems in such conditions. With a clear goal of extremely low cogging torque, this paper introduces a chiral modular stator (CMS) design for PMMs, featuring a mirror-symmetrical configuration analogous to chiral handedness. The CMS design induces phase-shifted slot reluctance variations, which help reduce cogging torque. By varying the CMS arrangement in either the circumferential or axial direction, flexible topology branches are obtained. Comparative studies show that the optimal topology achieves a cogging torque of only 21.7 mNm, which accounts for approximately 0.1% of the rated torque and demonstrates effective suppression. The modular design concurrently streamlines manufacturing processes and provides cost-effective and scalable manufacturing while maintaining a torque density of 23.4 Nm/L. Analytical analysis, simulation, and experimental verification confirm the CMS PMM's advantages, establishing it as a promising solution for precision PMM drive systems.

  • Torque Elevation by a Novel Double-sided Flux-Switching Permanent Magnet Machine with Hybrid Slot-Spoke Stator Magnets Design

    by Kaikai Guo, Yu Dong, Yongtao Liang, Zaixin Song, Li Wang

    This study introduces a novel double-sided flux-switching permanent-magnet machine (DS-FSPMM) where the stator combines consequent-pole and spoke-array PMs and the rotor uses consequent-pole PMs. This configuration exploits synergistic harmonics in the air-gap flux density to increase torque density. The topology and operational principles of the DS-FSPMM are firstly elucidated. A simplified magnetomotive force (MMF)-permeance model is employed to examine flux-field harmonics by dual-PM excitation. Results show that harmonic superposition between consequent-pole and spoke-array PM markedly enhances torque density. Furthermore, the superiority of proposed structure is validated by analyzing and comparing electromagnetic performance with that of a conventional topology. A manufactured prototype demonstrates that the proposed topology increases torque while reducing ripple via harmonic-field modulation, offering novel insights and practical guidance into high-torque-density FSPMM design and field-modulation theory applications.

  • Design Optimization and Performance Evaluation of a Novel Linear-Rotary Motor With Moving Coils

    by Kaikai Guo, Youguang Guo, Shuhua Fang, Weimin Wu, Xiong Gao

    In order to reduce the volume and improve the torque/thrust density of linear rotary motor (LRM), a novel structure LRM with moving coils is proposed, which has only one set of stator, rotor, mover and permanent magnet (PM) units. The axially magnetized PMs are arranged alternately in the rotor along the axial direction, which are the excitation source of rotary, linear and spiral motions at the same time. The distance of linear motion is equal to the difference between the stator axial length and mover axial length. Since the amplitude ripple of air gap flux density of rotary unit is large and the amplitude regions of the air gap flux density of the rotary units are asymmetry, 3-D analytical method is adopted to conduct the design optimization with different iterative precisions by building equivalent magnetic circuit model based on lumped parameters. The prototype is fabricated and the electromagnetic characteristics of the motor are verified by experiment tests. Compared with the traditional LRM, the proposed motor has higher torque/thrust density and smaller volume.


  • Research on Low Speed Operation of PMSM Based on Improved Non-Singular Fast Terminal SMC

    by Naifeng Zhang, Kaikai Guo, Youguang Guo

    A non-singular fast terminal sliding mode control (SMC) strategy with a new piecewise reaching law (PRL) of permanent magnet synchronous motor is presented to reduce the steady-state buffeting in this paper. A speed adaptive regulator is designed to make the motor work stably at the lowest speed value under the limitation of the DC bus voltage condition when the motor starts non-normally or with locked rotor, and a disturbance observation is introduced to further improve the anti-interference ability of the control system. The experiment test is carried out. Compared with the experimental results of traditional SMC, the buffeting suppression of the control system using non-singular fast terminal SMC with PRL is reduced by 66.7%, 57.9% and 60% at 20 rpm, 30 rpm and 40 rpm under no-load condition, respectively. The buffeting suppression and the dynamic stability time of the proposed method are reduced by 52.3% and 53.3% under load condition, respectively.


  • Design and Analysis of Two Doubly Salient Permanent Magnet Machines

    by Kaikai Guo, Chen Liu, Youguang Guo, Cong Li

    In order to improve the torque density of doubly salient permanent magnet (PM) machine (DSPMM), two different DSPMMs (topologies I and II) with NdFeB PM materials embedded in the stator yoke are presented, and the working magnetic circuits of both topologies contain the main magnetic circuit and auxiliary magnetic circuit through the magnetic barrier beside the PMs, which can improve the air gap flux density and the torque density effectively. The optimization designs of two DSPMMs are analyzed by establishing the equivalent magnetic circuit (EMC) models at no load and load conditions. Another two traditional DSPMMs (topologies III and IV) are taken as the comparison objects, and the best optimal structure parameters of the four topologies are decided by genetic algorithm. A prototype of topology II is manufactured, and the electromagnetic performances of the four DSPMMs are revealed. It is observed that the electromagnetic performances of topology II analyzed by EMC method are in agreement with the results analyzed by finite element method and test results, and the torque of topology II is larger by 148.1%, 27.72% and 245.5% than that of topology I, III and IV, respectively.


  • Control System Analysis of a Linear Rotary Motor With Single Directional Magnetic Circuit Structure

    by Kaikai Guo, Cong Li, Youguang Guo

    Since the complicated decoupling control strategy of single winding single directional magnetic circuit (SDMC) in linear rotary motor (LRM) limits its application, its control system is carried out based on space vector pulse width modulation, voltage predicted model and the active disturbance rejection control (ADRC) without considering decoupling control in this paper. The SDMC-LRM can be translated to different three-phase permanent magnet synchronous motors working with different electromagnetic parameters by adjusting the nine-phase windings connection form, which causes that the traditional control system with constant control parameters is not suitable for this system with changing motor parameters. In order to solve this problem, the radical basis function neural network algorithm is adopted to optimize the parameters of ADRC when the winding connection form is changed, which not only can simplify the parameter determination progress, but also can enhance the robustness of the control system. The different motion statues with different winding connection forms are concluded, and the dedicated control system simulation model and experimental platform are established to verify the control strategy with different winding connection forms.


  • Design and Analysis of a Permanent Magnet Frameless Motor

    by Kaikai Guo, Youguang Guo, Shuhua Fang, Cong Li, Wangqi Xue

    Compared to the conventional frame motor, the frameless motor has lower torque ripple and higher power density, which becomes the ideal selection in robotic field. In this paper, a novel permanent magnet (PM) frameless motor (FlM) is proposed, which has modular three teeth stator structure and toroidal windings. The air gap flux density and cogging torque are analyzed by analytical method, and back electromotive force (EMF) and torque of the PMFlM are calculated by magnetic circuit method, which can be used to achieve the best parameter values of PMFlM. The torque density of PMFlM is improved by increasing the axial length of the rotor and PM poles. A PM synchronous motor (SM) with toroidal winding and air gap in the stator pole (topology II) and traditional PMSM (topology III) are designed. A prototype is manufactured, and the electromagnetic characteristics of PMFlM are analyzed by both the experimental test and finite element method. While the three topologies have the same volume, the amplitude of the back EMF and the torque density of PMFlM are improved by 55.7 % and 35.8% compared to those of topology II, respectively. The torque density of PMFlM is larger by 3.5% than that of topology III.


  • Design and Optimization of Linear Rotary Drilling Motor

    by Kaikai Guo, Youguang Guo

    In order to improve the drilling efficiency and accuracy of drilling robot, a linear rotary drilling motor (LRDM) is proposed with U-type stator and toroidal winding structure. The stator sections are staggered, which can use the motor space effectively. The asymmetric air gap flux density (AGFD) phenomenon of LRDM is found based on the initial magnetic field analysis by finite-element method (FEM). According to flux tube principle, the variation law of the amplitude of the asymmetric AGFD of the LRDM is derived, which can be used to realize the optimization design with less computation time. The cogging torque, detent force, torque, and thrust are taken as the optimization objectives, and the optimal values of the structure and electromagnetic parameters are obtained. Then a prototype is manufactured. The electromagnetic characteristics of the proposed motor are analyzed and verified by FEM and experimental test.


  • Flux Leakage Analytical Calculation in the E-Shape Stator of Linear Rotary Motor With Interlaced Permanent Magnet Poles

    by Kaikai Guo, Youguang Guo, Shuhua Fang

    The circumferential and axial widths of permanent magnet (PM) pole and E-shape stator pole of linear rotary motor with interlaced PM poles are very influential to the back electromotive force (EMF) and the flux leakage analysis is complex, which causes difficulty in optimization of the motor structure. One of the key issues in optimization design is to calculate the flux leakage accurately. In this article, the main flux and side flux variation laws of stator pole are derived by analytical method. The flux leakage can be divided into the flux leakage between the PM and the mover, flux leakage on the stator tooth tip, and the flux leakage between the adjacent PM poles and stator pole. The 3-D flux leakage calculation model is built, which is suitable for the calculation of magnetic flux based on different motor operating principles. Then the rotational and rectilinear back EMFs are calculated by analytical method, which are consistent with the results analyzed by 3-D finite element method.