JZJiuyang Zhang

Jiuyang Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jiuyang Zhang has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Triboelectric Nanogenerator-Induced Electrically Conductive Transition in Metal Fiber/Polymer Composites

    by Songlin Liu, Zhiwei Li, Jiangli Wei, Jiuyang Zhang, Yan Peng

    Dynamic electrical conductivity regulation is essential for the development of flexible electronics and reconfigurable conductive materials. However, rapid conductive switching is typically achieved using continuous electrical excitation. Here, a triboelectric nanogenerator (TENG)-induced conductivity regulation strategy is developed using metal fiber/polymer composites. The transient electric field generated by the TENG induces an electrically conductive transition in the composite, enabling rapid switching from a high-resistance state to a low-resistance state without a continuous external power supply. The composites exhibit a resistance decrease of more than four orders of magnitude and complete conductive transition within 56 μs. The switching behavior is jointly governed by TENG output intensity and conductive network states, revealing a threshold-dependent transition mechanism. Electrical characterization and simulations suggest that localized transient Joule heating at fiber contact regions contributes to conductive connection formation and subsequent conductive network reconstruction. The conductive transition is observed in multiple polymer matrices and remains effective from 25 to 150 °C, demonstrating its applicability across different polymer matrices and temperatures. Furthermore, polymer matrix mechanics regulate the stability of the reconstructed conductive network, enabling either highly sensitive electromechanical responses or stable conductive retention. This work provides insights into transient electric field-induced conductive switching and offers a promising route toward tunable conductive materials and self-powered flexible electronics.

  • Open Access

    Regulated liquid metal via semiconductor valve toward highly stretchable topological circuits

    by Jiangli Wei, Zhenghao Kou, Yan Peng, Zhiwei Li, Yue Zhang, Jiuyang Zhang

    Wearable electronics with complex circuits and three-dimensional (3D) structure are indispensable to advanced next-generation flexible technologies like e-skins and soft robotics. However, fabricating 3D flexible electronics remains challenging, primarily due to the difficulty in obtaining highly stretchable materials with precise current control and complex topological structures. This work reports a unidirectional conductive semiconductor valve in liquid metals (LM-SV) constructed via interfacial barrier engineering to enable soft, complex topological circuits. The LM-SV exhibits ultrahigh stretchability (~1000% strain), robust unidirectional conductivity over 1000 cycles at 500% strain, and stable operation across wide temperature ( − 5–100 °C) and frequency (1 Hz – 5 MHz) ranges. Switching voltages (0.43—0.80 V) are conveniently tunable through LM composition modulation. Leveraging these features, LM-SV circuits can be topologically reconfigured from 2D layouts into 3D architectures with real-time functional switching. Furthermore, a wirelessly powered stretchable logic circuit demonstrates the potential of this LM-SV strategy for advanced flexible electronic systems.

  • Open Access

    Single polymer fiber–based ultrasensitive and multifunctional flexible microsensor via arthropod-inspired crack-helix coupling

    by Zixun Chen, Ye Zhang, Huaizhi Liu, Zhiwei Li, Jiuyang Zhang

    Flexible microsensors featuring miniature dimensions (< 100 μm), superior sensitivity [Gauge factor (GF) > 10 3 ], and phenomenal environmental stability (> 10 4 uses) have been broadly applied in modern soft electronics such as implantable health monitoring and soft robotics. However, it is quite challenging to integrate these distinguished features in a microdevice considering the extremely limited space for the complicated fabrication and complex functionalities. Inspired by microscale sensing systems in arthropods, this work presents a unique crack-helix soft microsensor (CHMS) within a single polymer microfiber. This microdevice successfully combines the structural advantages of both slit and hair sensors in arthropods through convenient depositing a thin layer (thickness: 2.5 μm) of biphasic liquid metals on a single microfiber (diameter: 80 μm). The microsensor presents unique frequency detection capability as arthropods (resolution: 0.01 Hz, > 1,088 Hz), ultrahigh sensitivity (GF > 2,711 ± 119), astonishing detection limit (0.05% strain and 0.2 mN), and excellent sensing durability (over 50,000 cycles), which are among the best of currently reported soft sensors. Furthermore, analogous to natural arthropods, CHMS shows different multifunctional environmental perception capability to precisely recognize subtle vibration under water or ground (amplitude < 70 μm) and extremely rarefied airflow (ultralow mass flux: 2.2 × 10 −4 g/s·cm 2 ).


  • Solid-liquid two-phased gallium-stannum binary metals enabled flexible and stretchable electronic circuit for interactive electronic devices

    by Yumeng Xin, Biao Zhou, Haiyuan Shao, Yinghui Liu, Chuanzhou Tao, Huiyan Wang, Jiancheng Zhou, Jiuyang Zhang


  • Open Access

    A universal strategy towards self-healing materials via dynamic interfacial liquid metal coordination

    by Zhiwei Li, Yue Zhang, Songlin Liu, Jingyu Lan, Yan Peng, Jiuyang Zhang

    Self-healing polymer materials, capable of autonomously repairing physical damage, have been broadly applied in modern technologies. In various self-healing systems, metal–ligand coordination bonds have been extensively utilized for their advantages of rich metal–ligand species and functionalities. However, common metal-ligand coordination either has excessively stable bond strengths or is too weak to construct self-healing materials. This work introduces coordination metals into liquid metals (LMs) to form multi-component LMs (mLMs), which creatively leverage the inherent fluidity of mLMs to convert common metal-ligand coordination (e.g., silver-sulfur and zinc/copper-imidazole systems) into reversible interfacial coordination. Such dynamic coordination successfully offers the fantastic self-healing efficiency over 90% for general polymers. Considering the ultra-high thermal conductivity of mLMs, self-healable thermal interface materials (TIMs) are obtained, which successfully address the long-standing challenge of the irreversible damage in long-term used TIMs. The self-healable TIMs can lower the peak temperature of the central processing unit (CPU) by 20 oC under extreme conditions for long time (accumulated 16 hours thermal shock, −10 oC to 100 oC). This work provides a universal strategy for self-healing materials and greatly broadens the investigations of self-healing, coordination chemistry, liquid metal science, soft electronics, and thermal management materials.


  • Electrically Conductive Inks as Programable Material Systems for Adaptive, Multifunctional, and Sustainable Electronics

    by Yan Peng, Huaizhi Liu, Peiwen Wu, Jiuyang Zhang

    Electrically conductive inks are important to the progress of flexible electronics, wearable systems, and soft robotics due to their low cost, lightweight design, and compatibility with scalable printing. Traditional formulations based on silver or copper particles, carbon materials, or conductive polymers have achieved significant advances but remain constrained by tradeoffs between conductivity, flexibility, and processing. Liquid metal inks combine fluidity, metallic conductivity, and self‐healing ability, yet the high filler content and environmental instability constrain broader application. To overcome these barriers, the concept of platform‐type conductive inks is emerging as a framework that balances electrical performance, processability, structural adaptability, and system functionality. This approach shifts attention from material‐specific optimization toward programable ink architectures that can serve diverse applications without fundamental reformulation. Future opportunities include universal printability, dynamic structural reconfiguration triggered by external stimuli, sustainable recycling strategies, and the integration of sensing or actuation functions. By advancing along these directions, conductive inks can evolve from passive conductors into adaptive and multifunctional material platforms, providing the foundation for next‐generation printed and reconfigurable electronics.


  • Open Access

    Cohering particles via weak electromagnetic waves for highly conductive polymer composites

    by Xiaohan Wang, Yue Zhang, Yan Peng, Peiwen Wu, Jiangli Wei, Hao Peng, Jiuyang Zhang

    Highly electrically conductive polymer composites are fundamental materials for today's electronic engineering. However, these composites are very expensive since heavy loading of costly conductive particles (fillers) is required to guarantee high electrical conductivity. This work successfully reports that weak electromagnetic waves (EMWs) could cohere the microparticles to optimize conductive networks for highly conductive polymer composites. Such an EMW strategy arises from the earliest EMW detector (coherer) invented by Marconi and Popov in 1895 via the breakdown of surface oxides and cohering of the micro-conductors by EMWs. The flexible composite (metal microfiber-polymer) shows a unique insulator-conductor transition with drastic resistance change (50 MΩ to 1 kΩ) under weak EMWs (power: 10-6 mW). The EMW strategy is extremely rapid (0.34 µs) and highly stable (104 cycles). Such EMW effect universally describes the interactions between EM fields and composite materials that are suitable for general conductors (e.g., carbon- and metal-fillers) and most polymers.


  • Chemical Exchange Between Silica Networks and Liquid Metals for All‐Inorganic, Sintering‐Free and Highly Conductive Inks

    by Bo Tian, Yiran Wang, Nan Jiang, Zixun Chen, Jiuyang Zhang

    Electrically conductive inks with noble metals (e.g. silver particles) and inorganic carriers (e.g. glass powder) are broadly applied in the electronics industry. However, such inorganic inks are generally not compatible with highly flexible electronics due to the inherent rigidity and poor surface compatibility. Based on the unique chemical exchange between silica hydroxyl groups and liquid metal surfaces, this work reports a wholeinorganic LM–silica gel ink (LMSG) with high electrical conductivity, excellent thermal stability, high flexibility, and surface compatibility. The conductive percolation threshold of the LMSG inks is only 43 wt.%, which is the lowest among reported LM composites so far. Interestingly, inorganic LMSG inks do not require any sintering procedure for conductive paths, removing serious constraints over traditional LM inks. In addition, LMSG inks can be prepared in bulk as powders for long‐term storage (>1 year) by simple dehydration, and more importantly, the dehydrated powders can conveniently regenerate LMSG inks via re‐dissolution. The circuits fabricated from LMSG inks show much improved thermal stability (>300 °C) compared with conventional LM inks (<100 °C). LMSG ink exhibits wide surface compatibility with plastics, wood, skin, etc. Highly flexible and complicated integrated circuits with microcontroller units (MCUs) can be successfully fabricated.


  • Vacuum‐Filling of Binary Metal for Soft Strain Sensor

    by Guoqiang Wang, Yuhuan Deng, Yuyang Li, Mingtao Kong, Anqi Cheng, Huaizhi Liu, Jiuyang Zhang

    Fibers have played an indispensable role in the development of human civilization. However, traditional fibers often fail to meet the demands of modern advancements. Smart fibers, especially conductive fibers, have received widespread attention in recent years. Liquid metal (LM) conductive fibers have emerged as a prominent area of research focus due to their unique combination of high conductivity and flexibility. However, researchers typically focus solely on the conductivity and fluidity, while the unique characteristics of LM have not been fully utilized in smart fibers. In this work, a Ga‐In binary metal is successfully injected into hollow polymer fibers using a vacuum filling technique, and prepared a leak‐free binary metal fiber (BMF) with multiple responsive properties. The influence of BM phase transition on BMF properties is investigated, and its application in human health and motion detection are explored.