SRScott M. Rosendahl

Scott M. Rosendahl

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Scott M. Rosendahl has a total of 123 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    13C enrichment within Cretaceous amber as an alternate C3 plant proxy to investigate anomalous carbon isotope values observed within Cretaceous food webs

    by Ben Egan, Thomas M. Cullen, Maria I. Velez, Scott M. Rosendahl, Seyed Hesam-Aldin Samaei, Jinkai Xue, Ryan C. McKellar

  • Open Access

    Orthogonal Solvent Mediation for Solid Composite Electrolyte Synthesis: Phase Integration via Particle Dispersion

    by Runqi Wu, Xiang You, Trinanjan Dey, Grace Flaman, Scott Rosendahl, Michael Fleischauer, Lingzi Sang

    Ceramic-rich solid-composite electrolytes exhibit ceramic-like ionic conductivity and enhanced mechanical property, making them promising candidates for market-relevant solid-state batteries. In-depth knowledge of the microstructure within the composite electrolytes for ideal performances and their correlation with the choice of materials and processing methods are not well-understood. Herein, we report a solution-cast, free-standing composite film comprised of well-integrated ceramic (Li3InCl¬6) and binder (Styrene-Ethylene-Butylene-Styrene, SEBS) phase, which simultaneously provides Li+ transport pathways and the required mechanical support. In the formation of this unique microstructure, we mark the mediator role of dibutyl ether – a low polarity solvent that forms a non-invasive polar-ionic interaction with the electronegative metal elements at the surface of Li3InCl¬6 particles to suspend and disperse Li3InCl6 particles in the dissolved SEBS matrix, facilitating phase integration. This weak interaction only occurs at chosen conditions; increased solvent-to-ceramic ratio and interaction time can induce Li3InCl6 decomposition. Our results correlate the electrochemical performance of a ceramic-rich Li3InCl6-SEBS composite electrolyte film with its microstructure; the latter was demonstrated to be potentially tunable by altering the molecular structure of the solvent and the parameters used in composite electrolyte synthesis procedures. This work provides materials structural-level insights that underpin the design principle of solution-cast solid composite electrolytes.

  • Open Access

    Orthogonal Solvent Mediation for Solid Composite Electrolyte Synthesis: Phase Integration via Particle Dispersion

    by Runqi Wu, Xiang You, Trinanjan Dey, Grace Flaman, Scott Rosendahl, Michael Fleischauer, Lingzi Sang

    Ceramic-rich solid-composite electrolytes exhibit ceramic-like ionic conductivity and enhanced mechanical property, making them promising candidates for market-relevant solid-state batteries. In-depth knowledge of the microstructure within the composite electrolytes for ideal performances and their correlation with the choice of materials and processing methods are not well-understood. Herein, we report a solution-cast, free-standing composite film comprised of well-integrated ceramic (Li3InCl¬6) and binder (Styrene-Ethylene-Butylene-Styrene, SEBS) phase, which simultaneously provides Li+ transport pathways and the required mechanical support. In the formation of this unique microstructure, we mark the mediator role of dibutyl ether – a low polarity solvent that forms a non-invasive polar-ionic interaction with the electronegative metal elements at the surface of Li3InCl¬6 particles to suspend and disperse Li3InCl6 particles in the dissolved SEBS matrix, facilitating phase integration. This weak interaction only occurs at chosen conditions; increased solvent-to-ceramic ratio and interaction time can induce Li3InCl6 decomposition. Our results correlate the electrochemical performance of a ceramic-rich Li3InCl6-SEBS composite electrolyte film with its microstructure; the latter was demonstrated to be potentially tunable by altering the molecular structure of the solvent and the parameters used in composite electrolyte synthesis procedures. This work provides materials structural-level insights that underpin the design principle of solution-cast solid composite electrolytes.

  • Open Access

    Orthogonal Solvent Mediation for Solid Composite Electrolyte Synthesis: Phase Integration via Particle Dispersion

    by Runqi Wu, Xiang You, Trinanjan Dey, Grace Flaman, Scott Rosendahl, Michael Fleischauer, Lingzi Sang

    Ceramic-rich solid-composite electrolytes exhibit ceramic-like ionic conductivity and enhanced mechanical property, making them promising candidates for market-relevant solid-state batteries. In-depth knowledge of the microstructure within the composite electrolytes for ideal performances and their correlation with the choice of materials and processing methods are not well-understood. Herein, we report a solution-cast, free-standing composite film comprised of well-integrated ceramic (Li3InCl¬6) and binder (Styrene-Ethylene-Butylene-Styrene, SEBS) phase, which simultaneously provides Li+ transport pathways and the required mechanical support. In the formation of this unique microstructure, we mark the mediator role of dibutyl ether – a low polarity solvent that forms a non-invasive polar-ionic interaction with the electronegative metal elements at the surface of Li3InCl¬6 particles to suspend and disperse Li3InCl6 particles in the dissolved SEBS matrix, facilitating phase integration. This weak interaction only occurs at chosen conditions; increased solvent-to-ceramic ratio and interaction time can induce Li3InCl6 decomposition. Our results correlate the electrochemical performance of a ceramic-rich Li3InCl6-SEBS composite electrolyte film with its microstructure; the latter was demonstrated to be potentially tunable by altering the molecular structure of the solvent and the parameters used in composite electrolyte synthesis procedures. This work provides materials structural-level insights that underpin the design principle of solution-cast solid composite electrolytes.

  • Open Access

    Orthogonal Solvent Mediation for Solid Composite Electrolyte Synthesis: Phase Integration via Particle Dispersion

    by Runqi Wu, Xiang You, Trinanjan Dey, Grace Flaman, Scott Rosendahl, Michael Fleischauer, Lingzi Sang

    Ceramic-rich solid-composite electrolytes exhibit ceramic-like ionic conductivity and enhanced mechanical property, making them promising candidates for market-relevant solid-state batteries. In-depth knowledge of the microstructure within the composite electrolytes for ideal performances and their correlation with the choice of materials and processing methods are not well-understood. Herein, we report a solution-cast, free-standing composite film comprised of well-integrated ceramic (Li3InCl¬6) and binder (Styrene-Ethylene-Butylene-Styrene, SEBS) phase, which simultaneously provides Li+ transport pathways and the required mechanical support. In the formation of this unique microstructure, we mark the mediator role of dibutyl ether – a low polarity solvent that forms a non-invasive polar-ionic interaction with the electronegative metal elements at the surface of Li3InCl¬6 particles to suspend and disperse Li3InCl6 particles in the dissolved SEBS matrix, facilitating phase integration. This weak interaction only occurs at chosen conditions; increased solvent-to-ceramic ratio and interaction time can induce Li3InCl6 decomposition. Our results correlate the electrochemical performance of a ceramic-rich Li3InCl6-SEBS composite electrolyte film with its microstructure; the latter was demonstrated to be potentially tunable by altering the molecular structure of the solvent and the parameters used in composite electrolyte synthesis procedures. This work provides materials structural-level insights that underpin the design principle of solution-cast solid composite electrolytes.

  • Cellulose-Encapsulated Composite Electrolyte Design: Toward Chemically and Mechanically Enhanced Solid-Sodium Batteries

    by Shu Dong, Geng Xie, Shihong Xu, Xuehai Tan, Madhusudan Chaudhary, Yue Zhang, Runqi Wu, Fuwei Wen, Cagri Ayranci, Vladimir K. Michaelis, et al.

    Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes and are candidates for high-energy- and high-power-density all-solid-state batteries. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na+ conductor that contains 92.5 wt % of sodium thioantimonate (Na3SbS4, NSS) and 7.5 wt % of sodium carboxymethyl cellulose (CMC); the latter serves as the binder and an electrochemically inert encapsulation layer. The ceramic and binder constituents were integrated at the particle level, providing ceramic NSS-level Na+ conductivity in the NSS–CMC composite. The more than 5-fold decrease of electrolyte thickness obtained in NSS–CMC composite provided a 5-fold increase in Na+ conductance compared to NSS ceramic pellets. As a result of the CMC encapsulation, this NSS–CMC composite shows increased moisture resistivity and electrochemical stability, which significantly promotes the cycling performance of NSS-based solid-state batteries. This work demonstrates a well-controlled, orthogonal process of ceramic-rich, composite electrolyte processing: independent streams for ceramic particle formation along with binder encapsulation in a solvent-assisted environment. This work also provides insights into the interplay among the solvent, the polymeric binder, and the ceramic particles in composite electrolyte synthesis and implies the critical importance of identifying the appropriate solvent/binder system for precise control of this complicated process.


  • Open Access

    A Cellulose Encapsulated Composite Electrolyte Design: Towards Chemically and Mechanically Enhanced Solid-sodium Batteries

    by Shu Dong, Geng Xie, Shihong Xu, Xuehai Tan, Madhusudan Chaudhary, Yue Zhang, Runqi Wu, Fuwei Wen, Cagri Ayranci, Vladimir Michaelis, et al.

    Replacing liquid electrolytes with solid ionic conductors attracts increasing attention due to the potential of improved battery safety. Solid-state batteries show potential for further increased energy/power density by eliminating the use of packaging accessories for unit cells. Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na+ conductor that contains 92.5 wt% of sodium thioantimonate (Na3SbS4, NSS) and 7.5 wt% of sodium carboxymethylcellulose (CMC); the latter serves as the binder and an electrochemically inert encapsulation layer. The ceramic and binder constituents were integrated at the particle level, providing ceramic NSS-level Na+ conductivity in the NSS-CMC composite, the more than five-fold decrease of electrolyte thickness obtained in NSS-CMC composite electrolytes provided a five-fold increase in Na+ conductance compared to NSS ceramic pellets. Resulting from the CMC encapsulation, this NSS-CMC composite shows increased moisture resistivity and electrochemical stability, which significantly promotes the cycling performance of NSS- based solid-state batteries, and improves ductility of the material. This work demonstrates a well-controlled, orthogonal process of ceramic-rich, composite electrolyte processing – independent streams for ceramic particle formation along and binder encapsulation in a solvent-assisted environment. This work provides insights into the interplay among the solvent, the polymeric binder, and the ceramic particles in composite electrolyte synthesis, and implies the critical importance of identifying the appropriate solvent/binder system for the precise control of this complicated process. Finally, the work also provides valuable insights into the potential of designing mechanically tailorable battery components via fundamental understanding of the effect of the constituents on the overall composite ductility.


  • Open Access

    Microfabrication Process Development for a Polymer-Based Lab-on-Chip Concept Applied in Attenuated Total Reflection Fourier Transform Infrared Spectroelectrochemistry

    by Noah Atkinson, Tyler A. Morhart, Garth Wells, Grace T. Flaman, Eric Petro, Stuart Read, Scott M. Rosendahl, Ian J. Burgess, Sven Achenbach

    Micro electro-mechanical systems (MEMS) combining sensing and microfluidics functionalities, as are common in Lab-on-Chip (LoC) devices, are increasingly based on polymers. Benefits of polymers include tunable material properties, the possibility of surface functionalization, compatibility with many micro and nano patterning techniques, and optical transparency. Often, additional materials, such as metals, ceramics, or silicon, are needed for functional or auxiliary purposes, e.g., as electrodes. Hybrid patterning and integration of material composites require an increasing range of fabrication approaches, which must often be newly developed or at least adapted and optimized. Here, a microfabrication process concept is developed that allows one to implement attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and electrochemistry on an LoC device. It is designed to spatially resolve chemical sensitivity and selectivity, which are instrumental for the detection of chemical distributions, e.g., during on-flow chemical and biological reaction chemistry. The processing sequence involves (i) direct-write and soft-contact UV lithography in SUEX dry resist and replication in polydimethylsiloxane (PDMS) elastomers as the fluidic structure; (ii) surface functionalization of PDMS with oxygen plasma, 3-aminopropyl-triethoxysilane (APTES), and a UV-curable glue (NOA 73) for bonding the fluidic structure to the substrate; (iii) double-sided patterning of silicon nitride-coated silicon wafers serving as the ATR-FTIR-active internal reflection element (IRE) on one side and the electrode-covered substrate for microfluidics on the back side with lift-off and sputter-based patterning of gold electrodes; and (iv) a custom-designed active vacuum positioning and alignment setup. Fluidic channels of 100 μm height and 600 μm width in 5 mm thick PDMS were fabricated on 2” and 4” demonstrators. Electrochemistry on-chip functionality was demonstrated by cyclic voltammetry (CV) of redox reactions involving iron cyanides in different oxidation states. Further, ATR-FTIR measurements of laminar co-flows of H2O and D2O demonstrated the chemical mapping capabilities of the modular fabrication concept of the LoC devices.


  • Chemical Imaging of Mass Transport Near the No-Slip Interface of a Microfluidic Device using Attenuated Total Reflection–Fourier Transform Infrared Spectroscopy

    by Grace T. Flaman, Nicole D. Boyle, Cyprien Vermelle, Tyler A. Morhart, Bdhanya Ramaswami, Stuart Read, Scott M. Rosendahl, Garth Wells, Liam P. Newman, Noah Atkinson, et al.

    Mass transport in geometrically confined environments is fundamental to microfluidic applications. Measuring the distribution of chemical species on flow requires the use of spatially resolved analytical tools compatible with microfluidic materials and designs. Here, the implementation of an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) imaging (macro-ATR) approach for chemical mapping of species in microfluidic devices is described. The imaging method is configurable between a large field of view, single-frame imaging, and the use of image stitching to build composite chemical maps. Macro-ATR is used to quantify transverse diffusion in the laminar streams of coflowing fluids in dedicated microfluidic test devices. It is demonstrated that the ATR evanescent wave, which primarily probes the fluid within ∼500 nm of the channel surface, provides accurate quantification of the spatial distribution of species in the entire microfluidic device cross section. This is the case when flow and channel conditions promote vertical concentration contours in the channel as verified by three-dimensional numeric simulations of mass transport. Furthermore, the validity of treating the mass transport problem in a simplified and faster approach using reduced dimensionality numeric simulations is described. Simplified one-dimensional simulations, for the specific parameters used herein, overestimate diffusion coefficients by a factor of approximately 2, whereas full three-dimensional simulations accurately agree with experimental results.