Hamid Reza Dalili Oskouei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamid Reza Dalili Oskouei has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Morteza Mohammadi Shirkolaei
Department of Electrical Engineering, Shahid Sattari Aeronautical University of Science and Technology, Tehran, Iran
3 shared publications Ali Reza Mirtaheri
Department of Electrical Engineering Shahid Sattari Aeronautical University of Science and Technology Tehran Iran
1 shared publication- Gholamreza Moradi
Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
1 shared publication - H Zamini
Department of Electrical and Computer Engineering, Semnan University, Semnan, Iran
1 shared publication - Hamid Kordbacheh1 shared publication
- M. Abbasi
Department of Electrical Engineering, Malek Ashtar University of Technology, Tehran, Iran
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Wiley in Journal of Sensors
- Vol. 2025 (1)
Wellhead‐Mounted Radar for Detecting and Evaluating Oil Well Perforations Using Super‐Resolution Algorithm and Imaging
In this article, monitoring of production zone perforations in metal‐cased oil wells using radar installed on the top of the well is proposed. The inspection includes the detection and evaluation of perforations in a laboratory oil well. Here, the necessary concepts to use the radar for this application are developed and proved based on different measurement scenarios. In the experiments, perforations with sizes ranging from 5 to 20 mm are considered. We used the multiple signal classification (MUSIC) method for radar signal processing to evaluate the holes. Additionally, we rotated the transmitter and receiver antennas to image the well wall for a more detailed evaluation of the holes. The perforations are assessed in four states: closed, air‐filled, paraffin‐filled, and noisy conditions. The measurement results demonstrate the potential of this method for oil well monitoring applications. It can effectively evaluate the status of perforations across different scenarios, even in noisy environments. Furthermore, this method can determine whether the holes are open or closed and accurately estimate their distance from the radar with minimum error.
- 1 January 2025
- Published by Wiley in Journal of Sensors
- Vol. 2025 (1)
Open AccessWellhead‐Mounted Radar for Detecting and Evaluating Oil Well Perforations Using Super‐Resolution Algorithm and Imaging
In this article, monitoring of production zone perforations in metal‐cased oil wells using radar installed on the top of the well is proposed. The inspection includes the detection and evaluation of perforations in a laboratory oil well. Here, the necessary concepts to use the radar for this application are developed and proved based on different measurement scenarios. In the experiments, perforations with sizes ranging from 5 to 20 mm are considered. We used the multiple signal classification (MUSIC) method for radar signal processing to evaluate the holes. Additionally, we rotated the transmitter and receiver antennas to image the well wall for a more detailed evaluation of the holes. The perforations are assessed in four states: closed, air‐filled, paraffin‐filled, and noisy conditions. The measurement results demonstrate the potential of this method for oil well monitoring applications. It can effectively evaluate the status of perforations across different scenarios, even in noisy environments. Furthermore, this method can determine whether the holes are open or closed and accurately estimate their distance from the radar with minimum error.
- 10 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105535
A wide angle beam scanning CRLH leaky-wave antenna with non-identical elements per unit-cells
In this research article, a wide-angle scanning leaky-wave antenna (LWA) based on the composite right/left-handed (CRLH) metamaterial (MTM) operating over the C-band spectrum for mobile applications is proposed, investigated, and realized. The proposed LWA includes nine CRLH-MTM-based unit-cells. The properties of CRLH-MTM have been applied using series slots and shunt metallic via-holes. Each unit cell consists of three patches, two external patches, and one smaller middle patch implemented between them. One slot has been etched on each external patch; the width of these two slots is unequal. Moreover, the distance of the middle patch with each side patch is different. The results show that using this method of realizing non-identical elements caused the achievement of proper return-loss at the transition frequency and provided the balanced CRLH metamaterial condition. Additionally, using CRLH-MTM properties by realizing series capacitance (slot) and shunt inductance (via-holes) made the wide-angle scant from backward to forward radiation pattern. The results demonstrate that the LW antenna with small dimensions of 251.5 × 30 × 1.575 mm3 operates over a frequency range of 4.8–6.13 GHz covering a wide beam scanning range from − 63 ° to + 6 5 ° with broadside radiation at the center frequency of 5.46 GHz. The radiation gain of the proposed antenna varies from 6.2–13.1 dB. The achievements confirm the effectiveness of the proposed methods to realize a high-performance LW-antenna with the advantages of simple design, low profile, low cost, and easy of manufacture for mobile applications.
- 10 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105535
A wide angle beam scanning CRLH leaky-wave antenna with non-identical elements per unit-cells
In this research article, a wide-angle scanning leaky-wave antenna (LWA) based on the composite right/left-handed (CRLH) metamaterial (MTM) operating over the C-band spectrum for mobile applications is proposed, investigated, and realized. The proposed LWA includes nine CRLH-MTM-based unit-cells. The properties of CRLH-MTM have been applied using series slots and shunt metallic via-holes. Each unit cell consists of three patches, two external patches, and one smaller middle patch implemented between them. One slot has been etched on each external patch; the width of these two slots is unequal. Moreover, the distance of the middle patch with each side patch is different. The results show that using this method of realizing non-identical elements caused the achievement of proper return-loss at the transition frequency and provided the balanced CRLH metamaterial condition. Additionally, using CRLH-MTM properties by realizing series capacitance (slot) and shunt inductance (via-holes) made the wide-angle scant from backward to forward radiation pattern. The results demonstrate that the LW antenna with small dimensions of 251.5 × 30 × 1.575 mm3 operates over a frequency range of 4.8–6.13 GHz covering a wide beam scanning range from − 63 ° to + 6 5 ° with broadside radiation at the center frequency of 5.46 GHz. The radiation gain of the proposed antenna varies from 6.2–13.1 dB. The achievements confirm the effectiveness of the proposed methods to realize a high-performance LW-antenna with the advantages of simple design, low profile, low cost, and easy of manufacture for mobile applications.
- 11 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 7 (4) , 2143-2152
Robust DoA Estimation in a Uniform Circular Array Antenna With Errors and Unknown Parameters Using Deep Learning
With the considerable rise in the number of devices connecting to the Internet, the demand for an extensive capacity communication networks is already apparent. Beam Division Multiple Access (BDMA) is a communication system method aimed at increasing capacity by simultaneously adapting portions of the antenna beam to the locations of multiple Mobile Stations (MSs) achieve enabling more efficient and effective data transmission. However, to assess the best performance, the Base Station (BS) must calculate the exact location of the MSs. In this research, we propose the Direction of Arrival (DoA) approach for locating MSs, where to determine the DoA, an array of antennas is utilized with two common configurations, Uniform Linear Array (ULA) and Uniform Circular Array (UCA). We suggest UCA because the main advantage of the circular array is the 360-degree coverage. Lately, due to the growth of Neural Networks (NNs), many researchers have studied the estimation of DoA using NNs. However, these studies are not widely accepted in practice due to the effect of series errors such as mutual coupling, gain, phase and element position errors and unknown parameters such as the number of input signals and signal level difference. This paper proposes a Deep Neural Network (DNN) framework for estimating the DoA in UCAs. Transfer Learning and Multi-Task techniques eliminate the need to count the number of input signals, reduce errors and bottleneck of NNs make the approach less sensitive than previous techniques. This paper improved the estimation by 75% compared with UCA-MUSIC, 73% compared with the method in (Basikolo et al., 2016), 92% compared with the method in (Hu, 2019), and 90% compared with the method in (Wang et al., 2015) when all the unknown parameters in the system are affected.
- 11 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 7 (4) , 2143-2152
Robust DoA Estimation in a Uniform Circular Array Antenna With Errors and Unknown Parameters Using Deep Learning
With the considerable rise in the number of devices connecting to the Internet, the demand for an extensive capacity communication networks is already apparent. Beam Division Multiple Access (BDMA) is a communication system method aimed at increasing capacity by simultaneously adapting portions of the antenna beam to the locations of multiple Mobile Stations (MSs) achieve enabling more efficient and effective data transmission. However, to assess the best performance, the Base Station (BS) must calculate the exact location of the MSs. In this research, we propose the Direction of Arrival (DoA) approach for locating MSs, where to determine the DoA, an array of antennas is utilized with two common configurations, Uniform Linear Array (ULA) and Uniform Circular Array (UCA). We suggest UCA because the main advantage of the circular array is the 360-degree coverage. Lately, due to the growth of Neural Networks (NNs), many researchers have studied the estimation of DoA using NNs. However, these studies are not widely accepted in practice due to the effect of series errors such as mutual coupling, gain, phase and element position errors and unknown parameters such as the number of input signals and signal level difference. This paper proposes a Deep Neural Network (DNN) framework for estimating the DoA in UCAs. Transfer Learning and Multi-Task techniques eliminate the need to count the number of input signals, reduce errors and bottleneck of NNs make the approach less sensitive than previous techniques. This paper improved the estimation by 75% compared with UCA-MUSIC, 73% compared with the method in (Basikolo et al., 2016), 92% compared with the method in (Hu, 2019), and 90% compared with the method in (Wang et al., 2015) when all the unknown parameters in the system are affected.
- 29 November 2021
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 69 (9) , 5944-5950
Design of 1*4 Microstrip Antenna Array on the Human Thigh with Gain Enhancement
In this paper, at first attempted to design and simulate a stacked circular microstrip patch antenna for high gain at frequency 2.45 GHz, to apply on the industrial, scientific, and medical (ISM) applications. The antenna needs to be minimized for the array mounted on the human thigh, which has high gain and pattern scan capability. The substrate with a high relative permittivity is used for the designed antenna to minimize the dimension of the antenna. A 1*4 array antenna is designed for mount on the human thigh. The amplitude and phase of each antenna are obtained using the maximum-gain theorem to achieve the maximum gain of this array antenna. The coaxial feed is used to achieve good impedance matching, low cross-polarization, and easy control of the amplitude and phase of the element. For designing this entire array antenna, three-dimensional electromagnetic field simulation software Ansoft HFSS based on the finite element method is applied. To experimentally verify the performance, a prototype of the array antenna is fabricated and measurement is performed. The realized gain of the designed array antenna at the resonant frequency is 11 dB. This array structure can be mounted on a human thigh, waist, or head for medical applications, depending on the specific radius.
- 29 November 2021
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 69 (9) , 5944-5950
Design of 1*4 Microstrip Antenna Array on the Human Thigh with Gain Enhancement
In this paper, at first attempted to design and simulate a stacked circular microstrip patch antenna for high gain at frequency 2.45 GHz, to apply on the industrial, scientific, and medical (ISM) applications. The antenna needs to be minimized for the array mounted on the human thigh, which has high gain and pattern scan capability. The substrate with a high relative permittivity is used for the designed antenna to minimize the dimension of the antenna. A 1*4 array antenna is designed for mount on the human thigh. The amplitude and phase of each antenna are obtained using the maximum-gain theorem to achieve the maximum gain of this array antenna. The coaxial feed is used to achieve good impedance matching, low cross-polarization, and easy control of the amplitude and phase of the element. For designing this entire array antenna, three-dimensional electromagnetic field simulation software Ansoft HFSS based on the finite element method is applied. To experimentally verify the performance, a prototype of the array antenna is fabricated and measurement is performed. The realized gain of the designed array antenna at the resonant frequency is 11 dB. This array structure can be mounted on a human thigh, waist, or head for medical applications, depending on the specific radius.
- 29 September 2021
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 64 (1) , 137-141
Substrate integrated waveguide leaky wave antenna with circular polarization and improvement of the scan angle
In this paper, a leaky wave antenna is presented based on the substrate integrated waveguide structure. The proposed antenna has a periodic structure with a combination of rectangular and H‐shaped slots on the top of the antenna. By providing this new design for slots, a better angular scanning achieved rather than the previous designs from broadside to end‐fire, so that with this design, the leaky wave antenna can scan from 2.5 to 87° by changing the feeding frequency, which is the highest scanning angle relative to the design of uniform rectangular slots, the butterfly shaped slots and the H‐shaped slots. The proposed antenna was designed to have circular polarization in the entire operating frequency range.
- 29 September 2021
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 64 (1) , 137-141
Substrate integrated waveguide leaky wave antenna with circular polarization and improvement of the scan angle
In this paper, a leaky wave antenna is presented based on the substrate integrated waveguide structure. The proposed antenna has a periodic structure with a combination of rectangular and H‐shaped slots on the top of the antenna. By providing this new design for slots, a better angular scanning achieved rather than the previous designs from broadside to end‐fire, so that with this design, the leaky wave antenna can scan from 2.5 to 87° by changing the feeding frequency, which is the highest scanning angle relative to the design of uniform rectangular slots, the butterfly shaped slots and the H‐shaped slots. The proposed antenna was designed to have circular polarization in the entire operating frequency range.
- Open Access
- 12 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 36527-36539
Robust Cross-Layer Routing and Radio Resource Allocation in Massive Multiple Antenna and OFDMA-Based Wireless Ad-Hoc Networks
- 12 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 36527-36539
Open AccessRobust Cross-Layer Routing and Radio Resource Allocation in Massive Multiple Antenna and OFDMA-Based Wireless Ad-Hoc Networks