Eleonora Okuskhanova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Eleonora Okuskhanova has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Maksim Borisovich Rebezov
Ural State Agrarian University; Gorbatov Research Center for Food Systems
10 shared publications - Zhanibek Yessimbekov
Semey Branch of JSC «Kazakh Scientific Research Institute of Processing and Food Industry
5 shared publications - Оксана Владимировна Зинина
South Ural State University
4 shared publications - Assel Dautova
Shakarim University
3 shared publications - Farida Smolnikova
Shakarim University
3 shared publications A. K. Suichinov
Kazakh Research Institute of Processing and Food Industry (Semey Branch)
2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 153 (3) , 165-174
Technology for producing meat pates with the addition of protein-fat emulsion
In the context of the intensive development of the agro-industrial complex and the growing demand for functional meat products, the improvement of technologies for processing raw materials of animal origin, in particular poultry products, is becoming especially relevant. In recent years, there has been increased interest in developing meat products with improved consumer, functional, and technological properties, necessitating the rational use of secondary raw materials and the implementation of innovative technological solutions. The objective of this study was to develop a formula for a protein-fat emulsion based on chicken by-products and to justify its use in the production of meat pâtés. The practical significance of this study lies in the possibility of effectively utilizing secondary poultry products, increasing the yield of finished products, and improving their structural and mechanical properties and biological value. This paper presents a technology for producing a protein-fat emulsion. The protein-fat emulsion is composed of by-product mass from chicken by-products - chicken gizzards, hearts and skin. It was found that the addition of protein-fat emulsion leads to a decrease in moisture content by 5.78% and ash by 0.87%, an increase in fat by 5.65% and protein by 1%. The addition of a protein-fat emulsion into a meat pâté recipe increased emulsifying capacity, enhanced system stability, reduced heat loss, and improved product consistency. The fatty acid composition changed, leading to an increase in the proportion of linoleic acid in the test sample. These results confirm the potential of using protein-fat emulsions from poultry by-products to enhance the technological and biological value of meat pâtés.
- 30 September 2026
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 153 (3) , 165-174
Open AccessTechnology for producing meat pates with the addition of protein-fat emulsion
In the context of the intensive development of the agro-industrial complex and the growing demand for functional meat products, the improvement of technologies for processing raw materials of animal origin, in particular poultry products, is becoming especially relevant. In recent years, there has been increased interest in developing meat products with improved consumer, functional, and technological properties, necessitating the rational use of secondary raw materials and the implementation of innovative technological solutions. The objective of this study was to develop a formula for a protein-fat emulsion based on chicken by-products and to justify its use in the production of meat pâtés. The practical significance of this study lies in the possibility of effectively utilizing secondary poultry products, increasing the yield of finished products, and improving their structural and mechanical properties and biological value. This paper presents a technology for producing a protein-fat emulsion. The protein-fat emulsion is composed of by-product mass from chicken by-products - chicken gizzards, hearts and skin. It was found that the addition of protein-fat emulsion leads to a decrease in moisture content by 5.78% and ash by 0.87%, an increase in fat by 5.65% and protein by 1%. The addition of a protein-fat emulsion into a meat pâté recipe increased emulsifying capacity, enhanced system stability, reduced heat loss, and improved product consistency. The fatty acid composition changed, leading to an increase in the proportion of linoleic acid in the test sample. These results confirm the potential of using protein-fat emulsions from poultry by-products to enhance the technological and biological value of meat pâtés.
- 19 June 2026
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 152 (2)
Histological examination of minced meat with herbal additives
The article examines the scientific and methodological foundations of using histological methods to study minced beef products with plant-based additives. In the modern food industry, minced beef formulations commonly include plant raw materials such as cereals, legumes, lentils, flour, black pepper, onion, and dietary fibers. Ensuring the accurate composition of the product, uniform distribution of ingredients, and compliance with technological requirements is an important issue. The study employed standard techniques of fixation, paraffin embedding, microtome sectioning, and hematoxylin-eosin staining. Histological analysis enabled the identification of morphological features of muscle, connective, and fat tissues, as well as plant cells, and allowed evaluation of their spatial arrangement and distribution. The results showed that plant additives may be evenly distributed or localized, directly affecting the technological and quality characteristics of the product. Histological analysis is also a reliable tool for detecting undeclared ingredients.
- 19 June 2026
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 152 (2)
Histological examination of minced meat with herbal additives
The article examines the scientific and methodological foundations of using histological methods to study minced beef products with plant-based additives. In the modern food industry, minced beef formulations commonly include plant raw materials such as cereals, legumes, lentils, flour, black pepper, onion, and dietary fibers. Ensuring the accurate composition of the product, uniform distribution of ingredients, and compliance with technological requirements is an important issue. The study employed standard techniques of fixation, paraffin embedding, microtome sectioning, and hematoxylin-eosin staining. Histological analysis enabled the identification of morphological features of muscle, connective, and fat tissues, as well as plant cells, and allowed evaluation of their spatial arrangement and distribution. The results showed that plant additives may be evenly distributed or localized, directly affecting the technological and quality characteristics of the product. Histological analysis is also a reliable tool for detecting undeclared ingredients.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 441-445
FUNCTIONAL AND LOW-CALORIE MEAT PRODUCTS
The article provides a comprehensive overview of the modern directions, methodologies, and scientific research in the development of functional and low-calorie meat products. The relevance of this area is explained by the increasing interest of the population in healthy nutrition, as well as the growing requirements for the safety and quality of food products. The study analyzed issues related to reducing fat, cholesterol, and nitrite content in meat products, as well as the possibilities of enriching them with omega-3 polyunsaturated fatty acids, plant-based proteins, probiotics, prebiotics, collagen, inulin, and other functional additives. In addition, various technological approaches were examined, including the use of vegetable oils, incorporation of protein hydrolysates, preparation of two-phase emulsions, and application of innovative industrial methods. The effects of these methods on the structural, microbiological, organoleptic, and nutritional quality of the products were evaluated in detail. The results demonstrated that functional ingredients can enhance the biological value of meat products, improve taste and consumer properties, reduce calorie content, and increase product stability and quality. This research confirms the practical significance of producing low-calorie and functional meat products, as well as the prospects for their application in industrial meat processing and largescale production.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 441-445
Open AccessFUNCTIONAL AND LOW-CALORIE MEAT PRODUCTS
The article provides a comprehensive overview of the modern directions, methodologies, and scientific research in the development of functional and low-calorie meat products. The relevance of this area is explained by the increasing interest of the population in healthy nutrition, as well as the growing requirements for the safety and quality of food products. The study analyzed issues related to reducing fat, cholesterol, and nitrite content in meat products, as well as the possibilities of enriching them with omega-3 polyunsaturated fatty acids, plant-based proteins, probiotics, prebiotics, collagen, inulin, and other functional additives. In addition, various technological approaches were examined, including the use of vegetable oils, incorporation of protein hydrolysates, preparation of two-phase emulsions, and application of innovative industrial methods. The effects of these methods on the structural, microbiological, organoleptic, and nutritional quality of the products were evaluated in detail. The results demonstrated that functional ingredients can enhance the biological value of meat products, improve taste and consumer properties, reduce calorie content, and increase product stability and quality. This research confirms the practical significance of producing low-calorie and functional meat products, as well as the prospects for their application in industrial meat processing and largescale production.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 390-398
STUDY OF THE BUTTER FORMATION PROCESS USING WHEY PROTEIN CONCENTRATE WPC-60
The butter formation process depends on the physical ripening of cream, cream churning, and butter grain processing. Various methods are used to improve and intensify this process, depending on the application of the theory of cream butter churning and the physical processes occurring during churning. This paper investigates the effect of whey protein concentrate WPC-60 on the cream churning and butter formation process in the production of butter with a fat content of 82.5%, with the aim of intensifying the process. The whey protein concentrate was added in the form of a cream module (dissolving WPC-60 powder in cream) at a ratio of 1:3. During cream churning, it was proposed to add WPC-60 in the form of a cream module introduced into the churned cream in amounts ranging from 0.5 to 1.5%. Experiments were carried out during summer and winter periods under different churning temperature regimes. The butter formation process, fat content in buttermilk, actual butter yield, degree of milk fat utilization, moisture mass fraction, amount of free (leaking) fat, and butter thermal stability were studied. It was found that the use of WPC-60 contributes to accelerating the churning process, reducing fat losses into buttermilk, and increasing the degree of milk fat utilization compared to control samples. The most effective regimes were: in the summer period – temperature of 6-8°C with the addition of 1% WPC-60; in the winter period – temperature of 10-12°C with the addition of 1.5% WPC60. The obtained results confirm the feasibility of using whey protein concentrate WPC-60 in the batch churning method for the production of butter with a fat content of 82.5% and improved quality indicators.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 390-398
Open AccessSTUDY OF THE BUTTER FORMATION PROCESS USING WHEY PROTEIN CONCENTRATE WPC-60
The butter formation process depends on the physical ripening of cream, cream churning, and butter grain processing. Various methods are used to improve and intensify this process, depending on the application of the theory of cream butter churning and the physical processes occurring during churning. This paper investigates the effect of whey protein concentrate WPC-60 on the cream churning and butter formation process in the production of butter with a fat content of 82.5%, with the aim of intensifying the process. The whey protein concentrate was added in the form of a cream module (dissolving WPC-60 powder in cream) at a ratio of 1:3. During cream churning, it was proposed to add WPC-60 in the form of a cream module introduced into the churned cream in amounts ranging from 0.5 to 1.5%. Experiments were carried out during summer and winter periods under different churning temperature regimes. The butter formation process, fat content in buttermilk, actual butter yield, degree of milk fat utilization, moisture mass fraction, amount of free (leaking) fat, and butter thermal stability were studied. It was found that the use of WPC-60 contributes to accelerating the churning process, reducing fat losses into buttermilk, and increasing the degree of milk fat utilization compared to control samples. The most effective regimes were: in the summer period – temperature of 6-8°C with the addition of 1% WPC-60; in the winter period – temperature of 10-12°C with the addition of 1.5% WPC60. The obtained results confirm the feasibility of using whey protein concentrate WPC-60 in the batch churning method for the production of butter with a fat content of 82.5% and improved quality indicators.
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 405-415
APPLICATION OF PLANT-BASED INGREDIENTS IN THE TECHNOLOGY OF MEAT PRODUCTS FOR ELDERLY NUTRITION
In the context of a rapidly growing elderly population, one of the key priorities is the development of specialized food products that support health maintenance, prevent age-related diseases, and provide nutritionally adequate diets. The aim of this study was to develop a gerodietetic meat semi-finished product technology using plant-based ingredients – bulgur flour and zucchini – known for their high nutritional and biological value. Three formulation variants were developed, differing in the percentage ratio of animal and plant-based raw materials. The samples were evaluated by sensory analysis using a scoring system (appearance, color, smell, taste, texture) and by determining their chemical composition. The results showed that the inclusion of plant ingredients improves the sensory qualities of the product, reduces fat content, and increases the levels of dietary fiber, vitamins, and minerals. The best performance was observed in sample No. 2, containing approximately 20% plant ingredients. The proposed formulation offers an optimal balance of sensory and nutritional properties, making it suitable for implementation in the production of gerodietetic meat products. Given its balanced composition and high consumer appeal, it is also appropriate for use in institutional catering systems and in the production of functional foods targeted at elderly nutrition.
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 405-415
APPLICATION OF PLANT-BASED INGREDIENTS IN THE TECHNOLOGY OF MEAT PRODUCTS FOR ELDERLY NUTRITION
In the context of a rapidly growing elderly population, one of the key priorities is the development of specialized food products that support health maintenance, prevent age-related diseases, and provide nutritionally adequate diets. The aim of this study was to develop a gerodietetic meat semi-finished product technology using plant-based ingredients – bulgur flour and zucchini – known for their high nutritional and biological value. Three formulation variants were developed, differing in the percentage ratio of animal and plant-based raw materials. The samples were evaluated by sensory analysis using a scoring system (appearance, color, smell, taste, texture) and by determining their chemical composition. The results showed that the inclusion of plant ingredients improves the sensory qualities of the product, reduces fat content, and increases the levels of dietary fiber, vitamins, and minerals. The best performance was observed in sample No. 2, containing approximately 20% plant ingredients. The proposed formulation offers an optimal balance of sensory and nutritional properties, making it suitable for implementation in the production of gerodietetic meat products. Given its balanced composition and high consumer appeal, it is also appropriate for use in institutional catering systems and in the production of functional foods targeted at elderly nutrition.
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 359-368
BIOTECHNOLOGICAL PROCESS INTENSIFICATION AND JUSTIFICATION OF INGREDIENT SELECTION TO IMPROVE THE QUALITY OF DRY-CURED POULTRY PRODUCTS
This article presents the scientific rationale for the analysis and selection of ingredients aimed at improving the quality of dry-cured poultry products and intensifying biotechnological processes. At present, an urgent task in the food industry is the production of new types of products with high nutritional and biological value, as well as favorable organoleptic characteristics. The study examined the possibility of controlling biotechnological, biochemical, and microbiological processes through the use of probiotic cultures and hydroalcoholic extracts based on herbal raw materials.When selecting phytoextracts, not only their physiological value was taken into account, but also their organoleptic compatibility with poultry meat and their suitability for use with probiotic cultures. Experimental studies established that rosehip extract at a concentration of 0.4% had different effects on the growth of probiotic strains: a decrease in the growth of L. plantarum was observed, while L. casei showed stable growth potential. In addition, it was demonstrated that the use of lactic acid bacteria and bifidobacteria in a 1:2 ratio ensures their mutual quantitative balance and contributes to the optimization of proteolytic activity.The conducted research has shown that the combined use of probiotic cultures and phytopreparations in the production technology of dry-cured poultry products makes it possible to improve product quality, accelerate maturation stages, and ensure the stability of technological processes.
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 359-368
BIOTECHNOLOGICAL PROCESS INTENSIFICATION AND JUSTIFICATION OF INGREDIENT SELECTION TO IMPROVE THE QUALITY OF DRY-CURED POULTRY PRODUCTS
This article presents the scientific rationale for the analysis and selection of ingredients aimed at improving the quality of dry-cured poultry products and intensifying biotechnological processes. At present, an urgent task in the food industry is the production of new types of products with high nutritional and biological value, as well as favorable organoleptic characteristics. The study examined the possibility of controlling biotechnological, biochemical, and microbiological processes through the use of probiotic cultures and hydroalcoholic extracts based on herbal raw materials.When selecting phytoextracts, not only their physiological value was taken into account, but also their organoleptic compatibility with poultry meat and their suitability for use with probiotic cultures. Experimental studies established that rosehip extract at a concentration of 0.4% had different effects on the growth of probiotic strains: a decrease in the growth of L. plantarum was observed, while L. casei showed stable growth potential. In addition, it was demonstrated that the use of lactic acid bacteria and bifidobacteria in a 1:2 ratio ensures their mutual quantitative balance and contributes to the optimization of proteolytic activity.The conducted research has shown that the combined use of probiotic cultures and phytopreparations in the production technology of dry-cured poultry products makes it possible to improve product quality, accelerate maturation stages, and ensure the stability of technological processes.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Study of the chemical composition and technological properties of poultry carcasses obtained from poultry farms in Semey city
This study comprehensively examined the chemical composition of poultry carcasses, their nutritional value, and technological properties. The research objects included broiler chickens and domestic poultry (chicken, goose, duck, and turkey). Samples were obtained from several poultry farms in Kazakhstan and analyzed using standardized methods. The chemical composition was assessed by measuring the mass fractions of moisture, protein, fat, and ash. In addition, the functional-technological properties of meat were evaluated, including water-binding capacity, water- and fat-holding capacity, emulsifying ability, emulsion stability, and structural-mechanical characteristics (shear force). The results demonstrated that broiler meat has higher nutritional value and better technological properties. Their carcasses contained a greater proportion of muscle tissue and less bone and connective tissue. Protein content exceeded 20%, fat content ranged between 1–2%, and the amino acid profile was found to be complete. In domestic poultry, nutritional indicators were relatively lower, but fat content was higher. The research results showed that the high water-holding capacity and emulsion stability of broiler meat enable its effective use in the production technology of minced meat products. In addition, it was found that meat from different poultry species possesses similar technological properties, which contribute to the improvement of the structural, mechanical, and organoleptic characteristics of the final products. The results obtained can serve as a basis for producing high-quality and competitive poultry meat products.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Study of the chemical composition and technological properties of poultry carcasses obtained from poultry farms in Semey city
This study comprehensively examined the chemical composition of poultry carcasses, their nutritional value, and technological properties. The research objects included broiler chickens and domestic poultry (chicken, goose, duck, and turkey). Samples were obtained from several poultry farms in Kazakhstan and analyzed using standardized methods. The chemical composition was assessed by measuring the mass fractions of moisture, protein, fat, and ash. In addition, the functional-technological properties of meat were evaluated, including water-binding capacity, water- and fat-holding capacity, emulsifying ability, emulsion stability, and structural-mechanical characteristics (shear force). The results demonstrated that broiler meat has higher nutritional value and better technological properties. Their carcasses contained a greater proportion of muscle tissue and less bone and connective tissue. Protein content exceeded 20%, fat content ranged between 1–2%, and the amino acid profile was found to be complete. In domestic poultry, nutritional indicators were relatively lower, but fat content was higher. The research results showed that the high water-holding capacity and emulsion stability of broiler meat enable its effective use in the production technology of minced meat products. In addition, it was found that meat from different poultry species possesses similar technological properties, which contribute to the improvement of the structural, mechanical, and organoleptic characteristics of the final products. The results obtained can serve as a basis for producing high-quality and competitive poultry meat products.
- Open Access
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 355-362
THE EFFECT OF ULTRASONIC WAVES ON THE CUTTING STRESS OF MEAT RAW MATERIALS
This study investigates the effect of ultrasonic waves on the cutting stress of various types of meat raw materials: maral meat, meat trimmings, and beef tripe. The experiments were conducted using ultrasonic baths with frequencies of 35 and 60 kHz, and water and a 2% solution of ascorbic acid were used as the processing medium. The method included cutting samples of standard sizes, ultrasonic treatment for 30–300 seconds, followed by determination of cutting stress using a structurometer. The results showed that the optimal parameters of ultrasonic treatment (240 seconds at 60 kHz in an ascorbic acid solution) provided the maximum reduction in cutting stress for all types of raw materials studied, indicating a pronounced softening of the muscle fiber structure. In particular, the cutting stress of maral meat decreased to 7572 Pa compared to the initial value of 12080 Pa, and the meat trimmings and beef tripe showed a decrease of more than 1.5 times. The data obtained demonstrate the effectiveness of ultrasonic treatment in improving the technological properties of meat raw materials and open up new opportunities for intensifying meat processing.
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 355-362
Open AccessTHE EFFECT OF ULTRASONIC WAVES ON THE CUTTING STRESS OF MEAT RAW MATERIALS
This study investigates the effect of ultrasonic waves on the cutting stress of various types of meat raw materials: maral meat, meat trimmings, and beef tripe. The experiments were conducted using ultrasonic baths with frequencies of 35 and 60 kHz, and water and a 2% solution of ascorbic acid were used as the processing medium. The method included cutting samples of standard sizes, ultrasonic treatment for 30–300 seconds, followed by determination of cutting stress using a structurometer. The results showed that the optimal parameters of ultrasonic treatment (240 seconds at 60 kHz in an ascorbic acid solution) provided the maximum reduction in cutting stress for all types of raw materials studied, indicating a pronounced softening of the muscle fiber structure. In particular, the cutting stress of maral meat decreased to 7572 Pa compared to the initial value of 12080 Pa, and the meat trimmings and beef tripe showed a decrease of more than 1.5 times. The data obtained demonstrate the effectiveness of ultrasonic treatment in improving the technological properties of meat raw materials and open up new opportunities for intensifying meat processing.
- Open Access
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 407-418
DEVELOPMENT OF PRODUCTION TECHNOLOGY AND EVALUATION OF NUTRITIONAL VALUE OF BURGER PATTIES USING A PROTEIN-FAT EMULSION
During the study, a technology was developed and optimized for the production of burger patties using a 15% protein-fat emulsion based on plant and animal ingredients, which provides improved functional and nutritional properties of the product. Sodium caseinate, flaxseed flour, freeze-dried vegetables, and sunflower oil were used to prepare the emulsion, which allowed for the formation of a stable dispersed system. Chemical analysis showed an increase in protein content by 18%, carbohydrates by 267%, and ash by 23%, with a simultaneous decrease in total fat and moisture compared to the control sample. Physicochemical tests revealed a decrease in dynamic viscosity and shear stress, while the moisture-binding capacity of the minced meat increased from 67.5% to 71.3%, indicating increased water retention capacity and improved texture stability. Organoleptic analysis showed better results in terms of color, texture, and taste characteristics compared to the control sample. Microbiological control ensured product safety: no pathogenic microorganisms were detected, and the total number of microbes was significantly below acceptable standards. The developed cutlets reduce the consumption of potentially harmful saturated fatty acids, which contributes to improving the lipid profile of nutrition and reducing the risk of cardiovascular diseases.
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 407-418
Open AccessDEVELOPMENT OF PRODUCTION TECHNOLOGY AND EVALUATION OF NUTRITIONAL VALUE OF BURGER PATTIES USING A PROTEIN-FAT EMULSION
During the study, a technology was developed and optimized for the production of burger patties using a 15% protein-fat emulsion based on plant and animal ingredients, which provides improved functional and nutritional properties of the product. Sodium caseinate, flaxseed flour, freeze-dried vegetables, and sunflower oil were used to prepare the emulsion, which allowed for the formation of a stable dispersed system. Chemical analysis showed an increase in protein content by 18%, carbohydrates by 267%, and ash by 23%, with a simultaneous decrease in total fat and moisture compared to the control sample. Physicochemical tests revealed a decrease in dynamic viscosity and shear stress, while the moisture-binding capacity of the minced meat increased from 67.5% to 71.3%, indicating increased water retention capacity and improved texture stability. Organoleptic analysis showed better results in terms of color, texture, and taste characteristics compared to the control sample. Microbiological control ensured product safety: no pathogenic microorganisms were detected, and the total number of microbes was significantly below acceptable standards. The developed cutlets reduce the consumption of potentially harmful saturated fatty acids, which contributes to improving the lipid profile of nutrition and reducing the risk of cardiovascular diseases.
- Open Access
- 27 December 2024
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(16)) , 190-199
INVESTIGATION OF THE FOOD SAFETY OF BUTTER WITH VEGETABLE COMPONENTS
The production of low-calorie types of butter is growing annually. Reducing saturated fats in butter helps reduce the risk of diseases such as atherosclerosis, obesity, and diabetes. An important factor in the production of butter is its food safety. This article provides studies on the food safety of unsalted sour-cream oil with vegetable fats for compliance with the requirements of technical regulations.Standard methods were used to conduct the study. To this end, microbiological parameters, radionuclides, toxic elements, pesticides, and antibiotics were determined in butter. The obtained indicators were compared with a control sample (unsalted sour cream butter «Sandwich») and the norms of the Technical Regulations of the Customs Union «On the safety of milk and dairy products» (TR CU 033/2013). The research results showed that the control sample and unsalted sour cream oil with vegetable fats meet the requirements of the technical regulations. Microbiological indicators allowed us to establish that in the prototype, the NMAaFAM index was 3,44 x 108, which exceeded the control sample (2,05 x 107), this indicates a high biological value of the product and a high content of probiotic cultures, at the same time, the requirements of the technical regulations do not normalize this indicator for sour-cream oil varieties. Yeast was also found in the control sample, as they are contained in the fermented milk starter culture «Em – Kurunga», used in the production of unsalted sour cream oil with vegetable fats. Other indicators, such as radionuclides, mycotoxins, antibiotics, toxic elements, pesticides, did not exceed the requirements of the technical regulations. The finished product is safe and can be sold to consumers.
- 27 December 2024
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(16)) , 190-199
Open AccessINVESTIGATION OF THE FOOD SAFETY OF BUTTER WITH VEGETABLE COMPONENTS
The production of low-calorie types of butter is growing annually. Reducing saturated fats in butter helps reduce the risk of diseases such as atherosclerosis, obesity, and diabetes. An important factor in the production of butter is its food safety. This article provides studies on the food safety of unsalted sour-cream oil with vegetable fats for compliance with the requirements of technical regulations.Standard methods were used to conduct the study. To this end, microbiological parameters, radionuclides, toxic elements, pesticides, and antibiotics were determined in butter. The obtained indicators were compared with a control sample (unsalted sour cream butter «Sandwich») and the norms of the Technical Regulations of the Customs Union «On the safety of milk and dairy products» (TR CU 033/2013). The research results showed that the control sample and unsalted sour cream oil with vegetable fats meet the requirements of the technical regulations. Microbiological indicators allowed us to establish that in the prototype, the NMAaFAM index was 3,44 x 108, which exceeded the control sample (2,05 x 107), this indicates a high biological value of the product and a high content of probiotic cultures, at the same time, the requirements of the technical regulations do not normalize this indicator for sour-cream oil varieties. Yeast was also found in the control sample, as they are contained in the fermented milk starter culture «Em – Kurunga», used in the production of unsalted sour cream oil with vegetable fats. Other indicators, such as radionuclides, mycotoxins, antibiotics, toxic elements, pesticides, did not exceed the requirements of the technical regulations. The finished product is safe and can be sold to consumers.