Ashraf Al-Rimawi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ashraf Al-Rimawi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Alhareth Zyoud
Department of Electrical and Computer Engineering, Birzeit University, Birzeit, Ramallah P627, Palestine
4 shared publications - Arafat Al-Dweik
Department of Computer and Information Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
4 shared publications - Wasel Ghanem
Department of Electrical and Computer Engineering, Birzeit University, Birzeit, Ramallah P627, Palestine
4 shared publications - Laith Ibrahim
School of Electrical and Electronic Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Malaysia
3 shared publications - Ahmed Badawi
Department of Electrical Engineering, University of Doha for Science and Technology, Doha P.O. Box 24449, Qatar
2 shared publications - Ali Kadhim Lwas
University Headquarters University of Fallujah,Department of Engineering Affairs,Fallujah,Iraq
2 shared publications
Latest Publications
- Open Access
- 25 March 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (4) , 29
An enhanced genetic algorithm with ant colony optimization for phase shift design in RIS-assisted MIMO networks
Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for seamless integration with future sixth-generation (6G) wireless systems. However, their performance critically depends on the optimization of numerous phase shifts across RIS elements, making efficient phase shift design crucial. Existing optimization methods often face limitations, including unbalanced exploration and exploitation, slow convergence, suboptimal channel gain, high computational overhead, poor scalability, and reduced robustness. Among them, the Genetic Algorithm (GA) is a widely used meta-heuristic for RIS phase shift optimization, valued for its strong exploration capabilities in complex, constrained, non-convex problems. Nevertheless, GA suffers from limited exploitation and high sensitivity to control parameters, leading to performance degradation. To address these limitations, this paper proposes an enhanced GA that integrates pheromone-guided selection and heuristic-driven recombination—adapted from ant colony optimization (ACO)—into the GA’s crossover operation only. This novel lightweight hybridization strengthens exploitation without compromising exploration. A new entropy-based mathematical framework is developed to rigorously analyze the exploration–exploitation trade-off. Simulations are performed to assess the enhanced GA while comparing it with the standard GA and another popular optimizer, the particle swarm optimizer (PSO). The results demonstrate that the enhanced GA consistently outperforms both the standard GA and PSO. In small-scale system, its exploration–exploitation balance enables it to reach the 95% balance point in only 6 iterations, compared to 66 and 43 for the original GA and PSO, respectively. It also converges faster with 7 against 62 and 43, achieving up to 1.6 dB higher channel gain. With a minimum runtime of 55 ms, it is more computationally efficient than the original GA (140 ms) and PSO (95 ms), reducing runtime by up to 2.6 times. Its scalability is evident, as its channel gain advantage grows from 1.6 dB to 2.4 dB with increasing network size. Furthermore, the enhanced GA demonstrates superior robustness under algorithmic parameter variations and channel estimation errors.
- 25 March 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (4) , 29
Open AccessAn enhanced genetic algorithm with ant colony optimization for phase shift design in RIS-assisted MIMO networks
Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for seamless integration with future sixth-generation (6G) wireless systems. However, their performance critically depends on the optimization of numerous phase shifts across RIS elements, making efficient phase shift design crucial. Existing optimization methods often face limitations, including unbalanced exploration and exploitation, slow convergence, suboptimal channel gain, high computational overhead, poor scalability, and reduced robustness. Among them, the Genetic Algorithm (GA) is a widely used meta-heuristic for RIS phase shift optimization, valued for its strong exploration capabilities in complex, constrained, non-convex problems. Nevertheless, GA suffers from limited exploitation and high sensitivity to control parameters, leading to performance degradation. To address these limitations, this paper proposes an enhanced GA that integrates pheromone-guided selection and heuristic-driven recombination—adapted from ant colony optimization (ACO)—into the GA’s crossover operation only. This novel lightweight hybridization strengthens exploitation without compromising exploration. A new entropy-based mathematical framework is developed to rigorously analyze the exploration–exploitation trade-off. Simulations are performed to assess the enhanced GA while comparing it with the standard GA and another popular optimizer, the particle swarm optimizer (PSO). The results demonstrate that the enhanced GA consistently outperforms both the standard GA and PSO. In small-scale system, its exploration–exploitation balance enables it to reach the 95% balance point in only 6 iterations, compared to 66 and 43 for the original GA and PSO, respectively. It also converges faster with 7 against 62 and 43, achieving up to 1.6 dB higher channel gain. With a minimum runtime of 55 ms, it is more computationally efficient than the original GA (140 ms) and PSO (95 ms), reducing runtime by up to 2.6 times. Its scalability is evident, as its channel gain advantage grows from 1.6 dB to 2.4 dB with increasing network size. Furthermore, the enhanced GA demonstrates superior robustness under algorithmic parameter variations and channel estimation errors.
- Open Access
Towards Resilient Grid Integration of Wind Power: A Comparative Study of Nine Numerical Approaches Across Six Cities in Palestine
This research presents a detailed assessment of the wind power potential in six Palestinian cities—Bethlehem, Jericho, Jenin, Nablus, Ramallah, and Tulkarm—utilizing daily wind speed data from the years 2015 to 2021. The primary goal of this study is to formulate a robust, data-driven framework for the strategic placement of turbines and the economical production of energy in areas with limited wind resources. A critical aspect of this research is the application of nine numerical methods, including the Maximum Likelihood Method (MLM) and the Energy Pattern Factor Method (EPF), to analyze the wind data. These methods were employed to estimate the shape and scale parameters of the Probability Distribution Function (PDF) that represents the Weibull distribution for various shape factor values. The accuracy of the numerical methods was validated through five statistical tools, including the Root Mean Square Error (RMSE) and Chi-square tests (). The Weibull parameters obtained from the numerical techniques indicated shape factors ranging from 1.27 to 1.96 and scale factors between 1.16 and 3.21 m/s. The energy output was calculated based on the swept area of the wind turbine, following Betz’s limit. The estimated annual energy production per square meter in the six cities is as follows: Ramallah—123 kWh/m2, Bethlehem—24.42 kWh/m2, Jenin—31.12 kWh/m2, Nablus—22 kWh/m2, Tulkarm—15.5 kWh/m2, and Jericho—10.36 kWh/m2. A 5 kW small-scale wind turbine was utilized to evaluate the technical feasibility, sustainability, and economic viability of small-scale wind energy applications. The anticipated energy output from the proposed wind turbine is 2054 kWh, with an estimated payback period of approximately 11.6 years.Open AccessTowards Resilient Grid Integration of Wind Power: A Comparative Study of Nine Numerical Approaches Across Six Cities in Palestine
This research presents a detailed assessment of the wind power potential in six Palestinian cities—Bethlehem, Jericho, Jenin, Nablus, Ramallah, and Tulkarm—utilizing daily wind speed data from the years 2015 to 2021. The primary goal of this study is to formulate a robust, data-driven framework for the strategic placement of turbines and the economical production of energy in areas with limited wind resources. A critical aspect of this research is the application of nine numerical methods, including the Maximum Likelihood Method (MLM) and the Energy Pattern Factor Method (EPF), to analyze the wind data. These methods were employed to estimate the shape and scale parameters of the Probability Distribution Function (PDF) that represents the Weibull distribution for various shape factor values. The accuracy of the numerical methods was validated through five statistical tools, including the Root Mean Square Error (RMSE) and Chi-square tests (). The Weibull parameters obtained from the numerical techniques indicated shape factors ranging from 1.27 to 1.96 and scale factors between 1.16 and 3.21 m/s. The energy output was calculated based on the swept area of the wind turbine, following Betz’s limit. The estimated annual energy production per square meter in the six cities is as follows: Ramallah—123 kWh/m2, Bethlehem—24.42 kWh/m2, Jenin—31.12 kWh/m2, Nablus—22 kWh/m2, Tulkarm—15.5 kWh/m2, and Jericho—10.36 kWh/m2. A 5 kW small-scale wind turbine was utilized to evaluate the technical feasibility, sustainability, and economic viability of small-scale wind energy applications. The anticipated energy output from the proposed wind turbine is 2054 kWh, with an estimated payback period of approximately 11.6 years. - 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 8523-8530
Outage Probability Analysis of RIS-Assisted UAV Communications With Direct Link and ISI
This work considers a non-terrestrial network where unmanned aerial vehicles (UAVs) communicate with a base station (BS) via a high-altitude platform (HAP)-mounted reconfigurable intelligent surface (RIS). In such configurations, the existence of obstacles blocking the direct link (DiL) between the UAV and BS depends on the positions of the HAP and UAV, which can vary over time. Therefore, the existence of the DiL is random. If the DiL exists, the large structures in urban areas may reflect the transmitted signals, forming a strong DiL. Due to the difference in distances, UAV-HAP-BS and UAV-BS, the signals from the two links may arrive at the receiver with different time delays, introducing intersymbol interference (ISI). Therefore, this work evaluates the impact of ISI on RIS-assisted UAV communications, where an analytical framework is developed to characterize the effects of ISI on the signal-to-interference-plus-noise ratio (SINR) and outage probability. Monte Carlo simulation results validate the analytical results, revealing that a strong DiL can reduce the performance gains provided by RISs, especially with a limited number of reflectors. Consequently, integrating ISI mitigation techniques with RIS deployment is crucial to avoid performance degradation.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 8523-8530
Outage Probability Analysis of RIS-Assisted UAV Communications With Direct Link and ISI
This work considers a non-terrestrial network where unmanned aerial vehicles (UAVs) communicate with a base station (BS) via a high-altitude platform (HAP)-mounted reconfigurable intelligent surface (RIS). In such configurations, the existence of obstacles blocking the direct link (DiL) between the UAV and BS depends on the positions of the HAP and UAV, which can vary over time. Therefore, the existence of the DiL is random. If the DiL exists, the large structures in urban areas may reflect the transmitted signals, forming a strong DiL. Due to the difference in distances, UAV-HAP-BS and UAV-BS, the signals from the two links may arrive at the receiver with different time delays, introducing intersymbol interference (ISI). Therefore, this work evaluates the impact of ISI on RIS-assisted UAV communications, where an analytical framework is developed to characterize the effects of ISI on the signal-to-interference-plus-noise ratio (SINR) and outage probability. Monte Carlo simulation results validate the analytical results, revealing that a strong DiL can reduce the performance gains provided by RISs, especially with a limited number of reflectors. Consequently, integrating ISI mitigation techniques with RIS deployment is crucial to avoid performance degradation.
- Open Access
- 6 November 2025
- Published by MDPI AG in Preprints.org
Towards Resilient Grid Integration of Wind Power: A Comparative Study of Nine Numerical Approaches Across Six Cities in Palestine
This research presents a detailed assessment of the wind power potential in six Palestinian cities: Bethlehem, Jericho, Jenin, Nablus, Ramallah, and Tulkarm, utilizing daily wind speed data from the years 2015 to 2021. The primary goal of this study is to formulate a robust, data-driven framework for the strategic placement of turbines and the economical production of energy in areas with limited wind resources. A critical aspect of this research is the application of nine numerical methods, including the Maximum Likelihood Method (MLM) and the Energy Pattern Factor Method (EPF), to analyze the wind data. These methods were employed to estimate the shape and scale parameters of the Probability Distribution Function (PDF) that represents the Weibull distribution for various shape factor values. The accuracy of the numerical methods was validated through five statistical tools, including the Root Mean Square Error (RMSE) and Chi-square tests (X^2). The Weibull parameters obtained from the numerical techniques indicated shape factors ranging from 1.27 to 1.96 and scale factors between 1.16 and 3.21 m/s. The energy output was calculated based on the swept area of the wind turbine, following Betz's limit. The estimated annual en ergy production per square meter in the six cities is as follows: Ramallah – 123.0175 kWh/m², Bethlehem – 24.42256 kWh/m², Jenin – 31.12444 kWh/m², Nablus – 21.99244 kWh/m², Tulkarm – 15.48823 kWh/m², and Jericho – 10.36153 kWh/m². A 5-kW small-scale wind turbine was utilized to evaluate the technical feasibility, sustainability, and economic viability of small-scale wind energy applications. The anticipated energy output from the proposed wind turbine is 2260 KWhr, with an estimated payback period of approximately 11 years.
- 6 November 2025
- Published by MDPI AG in Preprints.org
Open AccessTowards Resilient Grid Integration of Wind Power: A Comparative Study of Nine Numerical Approaches Across Six Cities in Palestine
This research presents a detailed assessment of the wind power potential in six Palestinian cities: Bethlehem, Jericho, Jenin, Nablus, Ramallah, and Tulkarm, utilizing daily wind speed data from the years 2015 to 2021. The primary goal of this study is to formulate a robust, data-driven framework for the strategic placement of turbines and the economical production of energy in areas with limited wind resources. A critical aspect of this research is the application of nine numerical methods, including the Maximum Likelihood Method (MLM) and the Energy Pattern Factor Method (EPF), to analyze the wind data. These methods were employed to estimate the shape and scale parameters of the Probability Distribution Function (PDF) that represents the Weibull distribution for various shape factor values. The accuracy of the numerical methods was validated through five statistical tools, including the Root Mean Square Error (RMSE) and Chi-square tests (X^2). The Weibull parameters obtained from the numerical techniques indicated shape factors ranging from 1.27 to 1.96 and scale factors between 1.16 and 3.21 m/s. The energy output was calculated based on the swept area of the wind turbine, following Betz's limit. The estimated annual en ergy production per square meter in the six cities is as follows: Ramallah – 123.0175 kWh/m², Bethlehem – 24.42256 kWh/m², Jenin – 31.12444 kWh/m², Nablus – 21.99244 kWh/m², Tulkarm – 15.48823 kWh/m², and Jericho – 10.36153 kWh/m². A 5-kW small-scale wind turbine was utilized to evaluate the technical feasibility, sustainability, and economic viability of small-scale wind energy applications. The anticipated energy output from the proposed wind turbine is 2260 KWhr, with an estimated payback period of approximately 11 years.
- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Towards Smart Farming an IoT Based Optimized Agriculture System
Agriculture in Palestine is considered the most significant sector that contributes to the gross domestic product. It is the pillar of the Palestinian economy and central to Palestinian identity. Reviewing recent reports by international organizations and the Ministry of Agriculture reveals the significant destruction in this sector. Recent reports by the United Nations show that less than $\mathbf{5 0 \%}$ of households in Palestine were food secure for the last three years. Smart agriculture is introduced as a solution to improve the performance of the crop production process and secure the food sector. This study aims to integrate the Internet of Things (IoT) and new technologies to enhance the agricultural production sector in Palestine. Three popular plants were selected, tomato, lettuce and cucumber. The outcomes of this study will save the farmer time and minimize the effort required in the production process.- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Towards Smart Farming an IoT Based Optimized Agriculture System
Agriculture in Palestine is considered the most significant sector that contributes to the gross domestic product. It is the pillar of the Palestinian economy and central to Palestinian identity. Reviewing recent reports by international organizations and the Ministry of Agriculture reveals the significant destruction in this sector. Recent reports by the United Nations show that less than $\mathbf{5 0 \%}$ of households in Palestine were food secure for the last three years. Smart agriculture is introduced as a solution to improve the performance of the crop production process and secure the food sector. This study aims to integrate the Internet of Things (IoT) and new technologies to enhance the agricultural production sector in Palestine. Three popular plants were selected, tomato, lettuce and cucumber. The outcomes of this study will save the farmer time and minimize the effort required in the production process.- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 151-156
A Deep Learning Lora-Based Indoor Localization Technique
Indoor localization is crucial for many applications where Global Positioning System (GPS) signals are frequently poor or unreliable, such as asset tracking and interior navigation. This study uses deep learning algorithms and the benefits of long-range wireless communication offered by Long Range (LoRa) to produce an accurate indoor locating system. The initial step towards constructing a wireless communication network is positioning LoRa-based devices at specified locations. A dataset is produced by merging the signal strength measurements acquired from each of these LoRa devices. Each location in the data set is within an environment, and measurements of the signal strength from LoRa devices related to those locations are included. The collected dataset is used to train the deep learning model. To increase accuracy, techniques like data augmentation and cross-validation were included. The experiment's results demonstrate the effectiveness of the deep learning-based LoRa indoor localization technique. Among the many possible applications for the suggested method are location-based services, asset monitoring, and precise indoor positioning.
- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 151-156
A Deep Learning Lora-Based Indoor Localization Technique
Indoor localization is crucial for many applications where Global Positioning System (GPS) signals are frequently poor or unreliable, such as asset tracking and interior navigation. This study uses deep learning algorithms and the benefits of long-range wireless communication offered by Long Range (LoRa) to produce an accurate indoor locating system. The initial step towards constructing a wireless communication network is positioning LoRa-based devices at specified locations. A dataset is produced by merging the signal strength measurements acquired from each of these LoRa devices. Each location in the data set is within an environment, and measurements of the signal strength from LoRa devices related to those locations are included. The collected dataset is used to train the deep learning model. To increase accuracy, techniques like data augmentation and cross-validation were included. The experiment's results demonstrate the effectiveness of the deep learning-based LoRa indoor localization technique. Among the many possible applications for the suggested method are location-based services, asset monitoring, and precise indoor positioning.
- Open Access
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 596-606
Coverage Probability of RIS-Assisted Wireless Communication Systems With Random User Deployment Over Nakagami-$m$ Fading Channel
In beyond 5G (B5G), the higher directivity and attenuation make millimeter-wave (mmWave) very vulnerable to blockages that degrades the system performance. However, reconfigurable intelligent surface (RIS) is considered as a key enabler for B5G applications to avoid the blockages effect. In this paper, to accurately model real-world behavior, we investigate a new analytical framework model for a RISaided wireless communication system with a random user deployment over Nakagami-m fading channel where the user's position distributes according to random waypoint (RWP) model, to characterize the performance of the system, considering direct and indirect links. As a result, new expressions for end-toend signal-to-noise ratio (SNR), coverage probability, and ergodic capacity (EC) are derived. The impact of different metrics such as: blockages density ($\lambda _{b}$), number of RIS reflecting elements ($N$), fading parameter at the indirect link ($m_{R}$), and path loss parameter ($\alpha$) has been studied to evaluate the system performance. The results provide valuable insights into the performance of the system under these metrics. The coverage probability is degraded by increasing the blockage density and path loss parameter as they hinder the signal propagation and limit the signal strength at the MU. For example, at $-10$ dB, the coverage probability is degrading from $8\times 10^{-2}$ for blockage density $\lambda _{b}=3$ Blockes/$km^{2}$ to $5\times 10^{-5}$ at $\lambda _{b}=11$ Blockes/$km^{2}$. On the other hand, increasing the number of RIS reflecting elements ($N$) and fading parameter ($m_{R}$) at the indirect link, improves the coverage probability by enhancing the signal strength, reducing the effects of fading, and compensating for environmental challenges such as blockages. For example, the coverage probability, at $-10$ dB, increases from $3\times 10^{-1}$ at number of reflecting elements $N = 15$ to $8\times 10^{-1}$ at $N=40$. As well, the increasing of $N$ and $m_{R}$ can significantly boost the EC as the system can direct the signal more effectively, which improves the overall signal quality and system capacity. The accuracy of the analysis is validated using the Monte Carlo simulations, which shows excellent agreement with the derived expressions.
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 596-606
Open AccessCoverage Probability of RIS-Assisted Wireless Communication Systems With Random User Deployment Over Nakagami-$m$ Fading Channel
In beyond 5G (B5G), the higher directivity and attenuation make millimeter-wave (mmWave) very vulnerable to blockages that degrades the system performance. However, reconfigurable intelligent surface (RIS) is considered as a key enabler for B5G applications to avoid the blockages effect. In this paper, to accurately model real-world behavior, we investigate a new analytical framework model for a RISaided wireless communication system with a random user deployment over Nakagami-m fading channel where the user's position distributes according to random waypoint (RWP) model, to characterize the performance of the system, considering direct and indirect links. As a result, new expressions for end-toend signal-to-noise ratio (SNR), coverage probability, and ergodic capacity (EC) are derived. The impact of different metrics such as: blockages density ($\lambda _{b}$), number of RIS reflecting elements ($N$), fading parameter at the indirect link ($m_{R}$), and path loss parameter ($\alpha$) has been studied to evaluate the system performance. The results provide valuable insights into the performance of the system under these metrics. The coverage probability is degraded by increasing the blockage density and path loss parameter as they hinder the signal propagation and limit the signal strength at the MU. For example, at $-10$ dB, the coverage probability is degrading from $8\times 10^{-2}$ for blockage density $\lambda _{b}=3$ Blockes/$km^{2}$ to $5\times 10^{-5}$ at $\lambda _{b}=11$ Blockes/$km^{2}$. On the other hand, increasing the number of RIS reflecting elements ($N$) and fading parameter ($m_{R}$) at the indirect link, improves the coverage probability by enhancing the signal strength, reducing the effects of fading, and compensating for environmental challenges such as blockages. For example, the coverage probability, at $-10$ dB, increases from $3\times 10^{-1}$ at number of reflecting elements $N = 15$ to $8\times 10^{-1}$ at $N=40$. As well, the increasing of $N$ and $m_{R}$ can significantly boost the EC as the system can direct the signal more effectively, which improves the overall signal quality and system capacity. The accuracy of the analysis is validated using the Monte Carlo simulations, which shows excellent agreement with the derived expressions.
- Open Access
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 10 (3) , 920-937
Capacity Analysis of Adaptive IRS-Aided Transmission With Direct Link in Nakagami-m Fading Channels
This paper introduces a new analytical framework to evaluate the capacity of intelligent reconfigurable surface (IRS) -aided wireless networks in the presence of a direct link (DL). The analysis obtained is used to characterize the signal-to-noise ratio (SNR) at the user equipment (UE) while using adaptive power and rate transmission. In particular, we consider channel inversion with fixed rate, optimum power and rate adaptation, and truncated channel inversion with a fixed rate. The obtained expressions are derived in a unified closed-form. All single-hop channel gains are modeled as independent and identically distributed Nakagami-m fading channels. Consequently, the channels gains at the receiver become independent and nonidentically distributed. The moment generating function (MGF) is used to derive an accurate approximation of the probability density and cumulative distribution functions of the instantaneous SNR, which are used to evaluate the channel capacity at low and high SNRs to quantify the achievable multiplexing gain. The analytical and simulation results obtained indicated that a strong DL may significantly enhance the channel capacity gain obtained using the IRS. In particular scenarios, the capacity improved by approximately 30% for a large number of IRS elements when the DL Nakagami fading parameter m increases from 2 to 6.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 10 (3) , 920-937
Open AccessCapacity Analysis of Adaptive IRS-Aided Transmission With Direct Link in Nakagami-m Fading Channels
This paper introduces a new analytical framework to evaluate the capacity of intelligent reconfigurable surface (IRS) -aided wireless networks in the presence of a direct link (DL). The analysis obtained is used to characterize the signal-to-noise ratio (SNR) at the user equipment (UE) while using adaptive power and rate transmission. In particular, we consider channel inversion with fixed rate, optimum power and rate adaptation, and truncated channel inversion with a fixed rate. The obtained expressions are derived in a unified closed-form. All single-hop channel gains are modeled as independent and identically distributed Nakagami-m fading channels. Consequently, the channels gains at the receiver become independent and nonidentically distributed. The moment generating function (MGF) is used to derive an accurate approximation of the probability density and cumulative distribution functions of the instantaneous SNR, which are used to evaluate the channel capacity at low and high SNRs to quantify the achievable multiplexing gain. The analytical and simulation results obtained indicated that a strong DL may significantly enhance the channel capacity gain obtained using the IRS. In particular scenarios, the capacity improved by approximately 30% for a large number of IRS elements when the DL Nakagami fading parameter m increases from 2 to 6.
- Open Access
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 141801-141859
Joint Beamforming Optimization Design and Performance Evaluation of RIS-Aided Wireless Networks: A Comprehensive State-of-the-Art Review
Reconfigurable intelligent surface (RIS) has emerged as a promising technology for supporting sixth-generation (6G) wireless communication systems. RIS intelligently manages signal reflection properties to enhance signal strength and quality at the receiver. RIS devices are inherently passive, requiring minimal power to perform signal manipulation. Through signal path optimization, interference and transmit power reduction, RIS advances energy efficiency. This aligns with the eco-friendly goals of 6G. However, efficient optimization in RIS-aided networks plays a crucial role in fully unlocking the potential of RIS. Additionally, performance evaluation of RIS-aided systems contributes to understanding optimal configurations and design guidelines for real-world RIS deployments. Despite the contributions from performance evaluation and optimization, RIS confronts various design constraints that demand innovative approaches to optimization and evaluation of their performances. Implementing RIS poses challenges in optimizing configurations for dynamic environments, handling computational complexity in large-scale systems, and adapting to changing wireless conditions. This work provides a comprehensive and in-depth survey of the state-of-the-art in joint optimization designs and performance evaluation for RIS-aided wireless systems. Furthermore, we identify areas that require further investigation to facilitate future research in addressing the existing gaps in knowledge. Finally, the survey discusses promising future research directions that include exploring optimization techniques ensuring global optima with computational efficiency, investigating analytical approaches for accurate network performance assessment under diverse conditions, advancing multi-objective joint optimization, developing application-specific integrated performance metrics, examining the joint impact of relevant RIS design parameters, investigating adaptive quantization schemes, and exploring reliable channel state estimation techniques that are resilient against dynamic environments, noise, interference, and delays.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 141801-141859
Open AccessJoint Beamforming Optimization Design and Performance Evaluation of RIS-Aided Wireless Networks: A Comprehensive State-of-the-Art Review
Reconfigurable intelligent surface (RIS) has emerged as a promising technology for supporting sixth-generation (6G) wireless communication systems. RIS intelligently manages signal reflection properties to enhance signal strength and quality at the receiver. RIS devices are inherently passive, requiring minimal power to perform signal manipulation. Through signal path optimization, interference and transmit power reduction, RIS advances energy efficiency. This aligns with the eco-friendly goals of 6G. However, efficient optimization in RIS-aided networks plays a crucial role in fully unlocking the potential of RIS. Additionally, performance evaluation of RIS-aided systems contributes to understanding optimal configurations and design guidelines for real-world RIS deployments. Despite the contributions from performance evaluation and optimization, RIS confronts various design constraints that demand innovative approaches to optimization and evaluation of their performances. Implementing RIS poses challenges in optimizing configurations for dynamic environments, handling computational complexity in large-scale systems, and adapting to changing wireless conditions. This work provides a comprehensive and in-depth survey of the state-of-the-art in joint optimization designs and performance evaluation for RIS-aided wireless systems. Furthermore, we identify areas that require further investigation to facilitate future research in addressing the existing gaps in knowledge. Finally, the survey discusses promising future research directions that include exploring optimization techniques ensuring global optima with computational efficiency, investigating analytical approaches for accurate network performance assessment under diverse conditions, advancing multi-objective joint optimization, developing application-specific integrated performance metrics, examining the joint impact of relevant RIS design parameters, investigating adaptive quantization schemes, and exploring reliable channel state estimation techniques that are resilient against dynamic environments, noise, interference, and delays.
- Open Access
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 3, 2314-2328
On the Performance of RIS-Assisted Communications With Direct Link Over κ-μ Shadowed Fading
In RIS-assisted communications, the SNR is improved by optimizing the reflecting elements’ phases to make the reflected signals add coherently at the receiver. Nevertheless, the RIS cannot control the phase of the direct link if it exists. Although the RIS phase can still be controlled such that the direct and reflected signals add coherently, the SNR gain might be hindered. Therefore, this paper considers the performance analysis of such scenarios where a novel analytical framework is developed to evaluate the SNR, outage probability, and BER. To capture a broad range of fading conditions, the channels are modeled as independent but not identically distributed generalized κ-μ shadowed fading channels. The Laplace transform is used to derive an accurate approximation of the PDF and CDF of the instantaneous fading, which are used to derive the PDF and CDF of the instantaneous SNR. The paper also considers deriving the asymptotic PDF, CDF, MGF of the SNR, as well as the outage probability and BER. The obtained results show that a strong direct link may limit the gain obtained using the RIS.
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 3, 2314-2328
Open AccessOn the Performance of RIS-Assisted Communications With Direct Link Over κ-μ Shadowed Fading
In RIS-assisted communications, the SNR is improved by optimizing the reflecting elements’ phases to make the reflected signals add coherently at the receiver. Nevertheless, the RIS cannot control the phase of the direct link if it exists. Although the RIS phase can still be controlled such that the direct and reflected signals add coherently, the SNR gain might be hindered. Therefore, this paper considers the performance analysis of such scenarios where a novel analytical framework is developed to evaluate the SNR, outage probability, and BER. To capture a broad range of fading conditions, the channels are modeled as independent but not identically distributed generalized κ-μ shadowed fading channels. The Laplace transform is used to derive an accurate approximation of the PDF and CDF of the instantaneous fading, which are used to derive the PDF and CDF of the instantaneous SNR. The paper also considers deriving the asymptotic PDF, CDF, MGF of the SNR, as well as the outage probability and BER. The obtained results show that a strong direct link may limit the gain obtained using the RIS.