Josep Gisbert
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Josep Gisbert has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
O. Buj
3 shared publications- Oscar Buj
University of Zaragoza
2 shared publications - Albert Solé-Benet
Estación Experimental de Zonas Áridas (EEZA-CSIC)
1 shared publication - Ana Simón-Muzás
Departamento de Ciencias de la Tierra, Geotransfer-IUCA, Universidad de Zaragoza, Zaragoza, Spain
1 shared publication - Andrea Antolín-Rodríguez
Agricultural and Agroenvironmental Engineering (INEA), Universidad Pontificia Comillas, Camino Viejo de Simancas km 4.5, 47008 Valladolid, Spain
1 shared publication - Andrés Juan-Valdés
Grupo de Investigación en Ingeniería de Materiales y Eco-Eficiencia (INMATECO), Departamento de Ingeniería y Ciencias Agrarias, Escuela de Ingeniería Agraria y Forestal (EIAF), Universidad de León, Avenida de Portugal 41, 24071 León, Spain
1 shared publication
Latest Publications
- Open Access
Novel Methodology to Assess Salt Movement Between Mortar and Stones from Heritage in Spain
The development of sustainable cementitious materials is crucial to reduce the environmental footprint of the construction industry. Alkali-activated materials (AAMs) have emerged as promising environmentally friendly alternatives; however, their compatibility with natural stone in heritage structures remains poorly understood, especially regarding salt migration and related damage to stones. This study presents a novel methodology for assessing salt movement in solid materials between two types of stones—Boñar and Silos—and two types of binders: blended Portland cement (BPC) and an AAM. The samples underwent capillarity and immersion tests to evaluate water absorption, salt transport, and efflorescence behavior. The capillarity of the Silos stone was 0.148 kg·m−2·t−0.5, whereas this was 0.0166 kg·m−2·t−0.5 for the Boñar stone, a ninefold difference. Conductivity mapping and XRD analysis revealed that AAM-based mortars exhibit a significantly higher release of salts, primarily sodium sulfate, which may pose a risk to adjacent porous stones. In contrast, BPC showed lower salt mobility and different salt compositions. These findings highlight the importance of evaluating the compatibility between alternative binders and heritage stones. The use of AAMs may pose significant risks due to their tendency to release soluble salts. Although, in the current experiments, no pore damage or mechanical degradation was observed, additional studies are required to confirm this. A thorough understanding of salt transport mechanisms is therefore essential to ensure that sustainable restoration materials do not inadvertently accelerate the deterioration of structures, a process more problematic when the deterioration affects heritage monuments.
Open AccessNovel Methodology to Assess Salt Movement Between Mortar and Stones from Heritage in Spain
The development of sustainable cementitious materials is crucial to reduce the environmental footprint of the construction industry. Alkali-activated materials (AAMs) have emerged as promising environmentally friendly alternatives; however, their compatibility with natural stone in heritage structures remains poorly understood, especially regarding salt migration and related damage to stones. This study presents a novel methodology for assessing salt movement in solid materials between two types of stones—Boñar and Silos—and two types of binders: blended Portland cement (BPC) and an AAM. The samples underwent capillarity and immersion tests to evaluate water absorption, salt transport, and efflorescence behavior. The capillarity of the Silos stone was 0.148 kg·m−2·t−0.5, whereas this was 0.0166 kg·m−2·t−0.5 for the Boñar stone, a ninefold difference. Conductivity mapping and XRD analysis revealed that AAM-based mortars exhibit a significantly higher release of salts, primarily sodium sulfate, which may pose a risk to adjacent porous stones. In contrast, BPC showed lower salt mobility and different salt compositions. These findings highlight the importance of evaluating the compatibility between alternative binders and heritage stones. The use of AAMs may pose significant risks due to their tendency to release soluble salts. Although, in the current experiments, no pore damage or mechanical degradation was observed, additional studies are required to confirm this. A thorough understanding of salt transport mechanisms is therefore essential to ensure that sustainable restoration materials do not inadvertently accelerate the deterioration of structures, a process more problematic when the deterioration affects heritage monuments.
- Open Access
- 29 June 2024
- Published by Sociedad Geologica de Espana in Geogaceta
- Vol. 75, 15-18
Estructuras microbianas en la Laguna de La Playa (Bujaraloz, NE España)
Describimos la presencia de matas microbianas en la Laguna de La Playa que condicionan la formación de determinadas estructuras que aparecen sobre su superficie. Estas estructuras, denominadas petees, se pueden clasificar en función de su morfología y origen. Así, se han clasificado en tres tipos diferentes y pueden estar formadas por la acción del viento sobre las matas microbianas poco desarrolladas (alpha-petees), por la acción conjunta de la acumulación de gases y la precipitación evaporítica sobre las matas (beta-petees) y por la expansión lateral producida por el crecimiento cristalino (gamma-petees). Los petees se distribuyen en función de las variaciones en el nivel del agua que inunda la salada en las estaciones lluviosas. De tal manera que en la zona NO, donde la lámina de agua se evapora antes, predominan los beta-petees y en la zona SE, donde el agua se acumula durante períodos de tiempo más prolongados, predominan los alpha-petees. Los gamma-petees se sitúan en la zona intermedia, donde la presencia de la lámina de agua es más variable. Durante las estaciones secas, la salada se seca por completo, dejando la mata microbiana expuesta a los procesos de precipitación evaporítica.
- 29 June 2024
- Published by Sociedad Geologica de Espana in Geogaceta
- Vol. 75, 15-18
Open AccessEstructuras microbianas en la Laguna de La Playa (Bujaraloz, NE España)
Describimos la presencia de matas microbianas en la Laguna de La Playa que condicionan la formación de determinadas estructuras que aparecen sobre su superficie. Estas estructuras, denominadas petees, se pueden clasificar en función de su morfología y origen. Así, se han clasificado en tres tipos diferentes y pueden estar formadas por la acción del viento sobre las matas microbianas poco desarrolladas (alpha-petees), por la acción conjunta de la acumulación de gases y la precipitación evaporítica sobre las matas (beta-petees) y por la expansión lateral producida por el crecimiento cristalino (gamma-petees). Los petees se distribuyen en función de las variaciones en el nivel del agua que inunda la salada en las estaciones lluviosas. De tal manera que en la zona NO, donde la lámina de agua se evapora antes, predominan los beta-petees y en la zona SE, donde el agua se acumula durante períodos de tiempo más prolongados, predominan los alpha-petees. Los gamma-petees se sitúan en la zona intermedia, donde la presencia de la lámina de agua es más variable. Durante las estaciones secas, la salada se seca por completo, dejando la mata microbiana expuesta a los procesos de precipitación evaporítica.
- Open Access
- 29 February 2024
- Published by Taylor & Francis in Journal of Maps
- Vol. 20 (1)
Geology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees
- 29 February 2024
- Published by Taylor & Francis in Journal of Maps
- Vol. 20 (1)
Open AccessGeology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees
- Open Access
- 15 December 2019
- Published by Cordoba University Press (UCOPress) in Anales de Arquelogía Cordobesa
- Vol. 30, 105-132
Canteras locales y rocas ornamentales empleadas en la arquitectura y epigrafía de Labitolosa (Conventus Caesaraugustanus, provincia Hispania citerior)
Los edificios públicos de Labitolosa fueron objeto de un importante proceso de monumentalización en la segunda mitad del siglo I d. C. En este trabajo nos centramos en la identificación geológica de las rocas ornamentales usadas en la Curia y en las termas I. Los análisis realizados indican un empleo exclusivo de calizas hispanas: la denominada Santa Tecla y las explotadas en Aguinalíu, donde se han localizado frentes antiguos de cantería. También se abordan cuestiones relacionadas con el coste del revestimiento marmóreo de las termas,
- 15 December 2019
- Published by Cordoba University Press (UCOPress) in Anales de Arquelogía Cordobesa
- Vol. 30, 105-132
Open AccessCanteras locales y rocas ornamentales empleadas en la arquitectura y epigrafía de Labitolosa (Conventus Caesaraugustanus, provincia Hispania citerior)
Los edificios públicos de Labitolosa fueron objeto de un importante proceso de monumentalización en la segunda mitad del siglo I d. C. En este trabajo nos centramos en la identificación geológica de las rocas ornamentales usadas en la Curia y en las termas I. Los análisis realizados indican un empleo exclusivo de calizas hispanas: la denominada Santa Tecla y las explotadas en Aguinalíu, donde se han localizado frentes antiguos de cantería. También se abordan cuestiones relacionadas con el coste del revestimiento marmóreo de las termas,
- Open Access
- 20 December 2018
- Published by Grupo Espanol del International Institute of Conservation in Ge-conservacion
- Vol. 14, 27-37
Caracterización geoquímica de las sales procedentes de deyecciones de palomas en patrimonio monumental. Iglesia de El Salvador (Úbeda, Jaén)
El deterioro ocasionado en el patrimonio histórico a consecuencia de las sales procedentes de deyecciones de palomas debe ser adecuadamente identificado y localizado. La realización de mapas de conductividad superficial en los paramentos, la extracción de sales mediante apósitos de celulosa y su análisis químico, y la posterior evaluación geoquímica constituyen la mejor combinación metodológica disponible para identificar la procedencia de este tipo de sales. A partir de un caso práctico se ha podido concluir que, en las zonas donde son patentes estas concentraciones salinas y sus consecuencias, predominan las sales de KNO3, pero donde los precipitados están en una fase incipiente de acumulación, es posible identificar dicho proceso activo por el predominio de Na+, K+, NO3- y Cl- en las extracciones salinas obtenidas mediante apósitos de celulosa. La correcta identificación del origen de las sales en los paramentos permite diseñar de forma eficiente las actuaciones de limpieza y mantenimiento.
- 20 December 2018
- Published by Grupo Espanol del International Institute of Conservation in Ge-conservacion
- Vol. 14, 27-37
Open AccessCaracterización geoquímica de las sales procedentes de deyecciones de palomas en patrimonio monumental. Iglesia de El Salvador (Úbeda, Jaén)
El deterioro ocasionado en el patrimonio histórico a consecuencia de las sales procedentes de deyecciones de palomas debe ser adecuadamente identificado y localizado. La realización de mapas de conductividad superficial en los paramentos, la extracción de sales mediante apósitos de celulosa y su análisis químico, y la posterior evaluación geoquímica constituyen la mejor combinación metodológica disponible para identificar la procedencia de este tipo de sales. A partir de un caso práctico se ha podido concluir que, en las zonas donde son patentes estas concentraciones salinas y sus consecuencias, predominan las sales de KNO3, pero donde los precipitados están en una fase incipiente de acumulación, es posible identificar dicho proceso activo por el predominio de Na+, K+, NO3- y Cl- en las extracciones salinas obtenidas mediante apósitos de celulosa. La correcta identificación del origen de las sales en los paramentos permite diseñar de forma eficiente las actuaciones de limpieza y mantenimiento.
- Open Access
- 28 September 2017
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 50 (4) , 393-401
Texture and mineralogy influence on durability: the Macigno sandstone
The behaviour of ornamental stones in response to environmental changes or interactions is crucial when dealing with the conservation of cultural heritage. Weathering factors affect each rock differently, depending on structure, mineralogy, and extraction and implementation techniques. This work focuses on the Macigno sandstone, a dimension stone often employed in Tuscany over the centuries. A thorough mineralogical (optical microscopy, scanning electron microscopy and X-ray powder diffraction) and petrophysical characterization (i.e. mercury intrusion porosimetry, X-ray computed tomography, hygroscopic adsorption behaviour, ultrasounds, image analysis and capillary uptake) was made of the sandstone type extracted in the area of Greve in Chianti. The lithotype shows mineralogical (i.e. presence of mixed-layer phyllosilicates) and micro-porosimetric features, leading to a high susceptibility to relative humidity variation. Moreover, the influence of swelling minerals is related to weathering due to saline solution. The joint application of petrographic and petrophysical techniques allows an understanding of the characteristic weathering pattern of exfoliation (i.e. detachment of multiple thin stone layers, centimetre scale, that are sub-parallel to the stone surface).
- 28 September 2017
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 50 (4) , 393-401
Open AccessTexture and mineralogy influence on durability: the Macigno sandstone
The behaviour of ornamental stones in response to environmental changes or interactions is crucial when dealing with the conservation of cultural heritage. Weathering factors affect each rock differently, depending on structure, mineralogy, and extraction and implementation techniques. This work focuses on the Macigno sandstone, a dimension stone often employed in Tuscany over the centuries. A thorough mineralogical (optical microscopy, scanning electron microscopy and X-ray powder diffraction) and petrophysical characterization (i.e. mercury intrusion porosimetry, X-ray computed tomography, hygroscopic adsorption behaviour, ultrasounds, image analysis and capillary uptake) was made of the sandstone type extracted in the area of Greve in Chianti. The lithotype shows mineralogical (i.e. presence of mixed-layer phyllosilicates) and micro-porosimetric features, leading to a high susceptibility to relative humidity variation. Moreover, the influence of swelling minerals is related to weathering due to saline solution. The joint application of petrographic and petrophysical techniques allows an understanding of the characteristic weathering pattern of exfoliation (i.e. detachment of multiple thin stone layers, centimetre scale, that are sub-parallel to the stone surface).
- 1 March 2011
- Published by Elsevier in Engineering Geology
- Vol. 118 (3-4) , 110-121
The pore system of sedimentary rocks as a key factor in the durability of building materials
- 1 March 2011
- Published by Elsevier in Engineering Geology
- Vol. 118 (3-4) , 110-121
The pore system of sedimentary rocks as a key factor in the durability of building materials
- 21 February 2011
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 36 (3) , 383-394
Spatial characterization of salt accumulation in early stage limestone weathering using probe permeametry
This research characterizes the weathering of natural building stone using an unsteady‐state portable probe permeameter. Variations between the permeability properties of fresh rock and the same rocks after the early stages of a salt weathering simulation are used to examine the effects of salt accumulation on spatial variations in surface rock permeability properties in two limestones from Spain. The Fraga and Tudela limestones are from the Ebro basin and are of Miocene age. Both stone types figure largely in the architectural heritage of Spain and, in common with many other building limestones, they are prone to physical damage from salt crystallization in pore spaces. To examine feedbacks associated with salt accumulation during the early stages of this weathering process, samples of the two stone types were subjected to simulated salt weathering under laboratory conditions using magnesium sulphate and sodium chloride at concentrations of 5% and 15%. Permeability mapping and statistical analysis (aspatial statistics and spatial prediction) before and after salt accumulation are used to assess changes in the spatial variability of permeability and to correlate these changes with salt movement, porosity change, potential rock deterioration and textural characteristics. Statistical analyses of small‐scale permeability measurements are used to evaluate the drivers for decay and hence aid the prediction of the weathering behaviour of the two limestones. Copyright © 2010 John Wiley & Sons, Ltd.
- 21 February 2011
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 36 (3) , 383-394
Spatial characterization of salt accumulation in early stage limestone weathering using probe permeametry
This research characterizes the weathering of natural building stone using an unsteady‐state portable probe permeameter. Variations between the permeability properties of fresh rock and the same rocks after the early stages of a salt weathering simulation are used to examine the effects of salt accumulation on spatial variations in surface rock permeability properties in two limestones from Spain. The Fraga and Tudela limestones are from the Ebro basin and are of Miocene age. Both stone types figure largely in the architectural heritage of Spain and, in common with many other building limestones, they are prone to physical damage from salt crystallization in pore spaces. To examine feedbacks associated with salt accumulation during the early stages of this weathering process, samples of the two stone types were subjected to simulated salt weathering under laboratory conditions using magnesium sulphate and sodium chloride at concentrations of 5% and 15%. Permeability mapping and statistical analysis (aspatial statistics and spatial prediction) before and after salt accumulation are used to assess changes in the spatial variability of permeability and to correlate these changes with salt movement, porosity change, potential rock deterioration and textural characteristics. Statistical analyses of small‐scale permeability measurements are used to evaluate the drivers for decay and hence aid the prediction of the weathering behaviour of the two limestones. Copyright © 2010 John Wiley & Sons, Ltd.
- Open Access
- 30 September 2010
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 60 (299) , 99-114
Characterization of pore system and their influence on decay rates caused by salt weathering on limestones and dolostones quarried in Abanto (Zaragoza, Spain)
The Abanto natural stone is a rock used in modern constructions and currently quarried as an ornamental rock in Abanto, Zaragoza. The varieties described here are a limestone with depositional texture and a crystalline limestone. In this work we have carried out a detailed study of the mineralogy, texture, hydric behaviour, pore system characteristics, dynamic behaviour and behaviour against the effects of salt crystallisation. After 30 cycles of salts crystallization, the weight loss in these rocks is lower than 0.5%. This low weathering is a consequence of the configuration of their pore system, characterised by a low open porosity and high percentages of microporosity with pore-throat sizes on average of less than a 0.2 µm. The petrographical and physical characteristics, as well as its high resistance against salt crystallisation confer these rocks a high technical quality for their use as building stones in modern construction.
- 30 September 2010
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 60 (299) , 99-114
Open AccessCharacterization of pore system and their influence on decay rates caused by salt weathering on limestones and dolostones quarried in Abanto (Zaragoza, Spain)
The Abanto natural stone is a rock used in modern constructions and currently quarried as an ornamental rock in Abanto, Zaragoza. The varieties described here are a limestone with depositional texture and a crystalline limestone. In this work we have carried out a detailed study of the mineralogy, texture, hydric behaviour, pore system characteristics, dynamic behaviour and behaviour against the effects of salt crystallisation. After 30 cycles of salts crystallization, the weight loss in these rocks is lower than 0.5%. This low weathering is a consequence of the configuration of their pore system, characterised by a low open porosity and high percentages of microporosity with pore-throat sizes on average of less than a 0.2 µm. The petrographical and physical characteristics, as well as its high resistance against salt crystallisation confer these rocks a high technical quality for their use as building stones in modern construction.
- 2 February 2010
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 61 (7) , 1327-1336
Influence of pore morphology on the durability of sedimentary building stones from Aragon (Spain) subjected to standard salt decay tests
- 2 February 2010
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 61 (7) , 1327-1336
Influence of pore morphology on the durability of sedimentary building stones from Aragon (Spain) subjected to standard salt decay tests