Alexander N. Kulak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexander N. Kulak has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Fiona C. Meldrum
University of Leeds
5 shared publications - Malcolm Andrew Halcrow
School of Chemistry, University of Leeds, Woodhouse Lane, Leeds LS2 9JT, U.K.
3 shared publications - Ahmed Ahmed
School of Chemistry University of Leeds Woodhouse Lane Leeds UK LS2 9JT
2 shared publications Alexander Broad
Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT, U.K.
2 shared publicationsAmy Hall
School of Chemistry University of Leeds Woodhouse Lane Leeds UK LS2 9JT
2 shared publications- Christopher M. Pask
University of Leeds
2 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (22) , 16219-16233
Nanopipettes Enable Native Mass Spectrometry Studies of the Intrinsically Disordered Protein α-Synuclein in Biochemical Buffers
Buffer and electrolyte conditions in vivo and in vitro are known to influence protein structure and function. Intrinsically disordered proteins (IDPs) are particularly sensitive to their solution conditions such as ionic strength and molecular crowding, and their dynamic structural ensembles rapidly respond to the cellular environment. While structural mass spectrometry (MS) techniques are uniquely able to capture aspects of this structural diversity, technical limitations have largely precluded the use of native MS and ion mobility (IM) to interrogate the conformations of IDPs in the presence of different buffers and biologically relevant concentrations of nonvolatile salts. Here, we overcome this challenge by employing sub-100 nm nanopipette electrospray ionization emitters that enable gentle and salt-tolerant analysis to study the conformational distribution of α-Synuclein (αS) monomers using native IM-MS in varied solution conditions, including in phosphate-buffered saline. We show using native MS that it is possible to capture salt- and buffer-induced changes in the αS conformational ensemble in commonly used biochemical buffers, which reflect structural changes from in silico predictions and in-solution measurements. This work demonstrates the power of nanopipette emitters for the study of IDPs and establishes native MS as a method that can be routinely used to study the conformational landscape of IDPs in nonvolatile and biologically relevant buffers.
- 25 May 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (22) , 16219-16233
Open AccessNanopipettes Enable Native Mass Spectrometry Studies of the Intrinsically Disordered Protein α-Synuclein in Biochemical Buffers
Buffer and electrolyte conditions in vivo and in vitro are known to influence protein structure and function. Intrinsically disordered proteins (IDPs) are particularly sensitive to their solution conditions such as ionic strength and molecular crowding, and their dynamic structural ensembles rapidly respond to the cellular environment. While structural mass spectrometry (MS) techniques are uniquely able to capture aspects of this structural diversity, technical limitations have largely precluded the use of native MS and ion mobility (IM) to interrogate the conformations of IDPs in the presence of different buffers and biologically relevant concentrations of nonvolatile salts. Here, we overcome this challenge by employing sub-100 nm nanopipette electrospray ionization emitters that enable gentle and salt-tolerant analysis to study the conformational distribution of α-Synuclein (αS) monomers using native IM-MS in varied solution conditions, including in phosphate-buffered saline. We show using native MS that it is possible to capture salt- and buffer-induced changes in the αS conformational ensemble in commonly used biochemical buffers, which reflect structural changes from in silico predictions and in-solution measurements. This work demonstrates the power of nanopipette emitters for the study of IDPs and establishes native MS as a method that can be routinely used to study the conformational landscape of IDPs in nonvolatile and biologically relevant buffers.
- Open Access
- 17 December 2024
- Published by Wiley in Angewandte Chemie
- Vol. 137 (5)
Structural Bifurcation in the High→Low‐Spin and Low→High‐Spin Phase Transitions Explains the Asymmetric Spin‐Crossover in [FeL2][BF4]2 (L=2,6‐Di{pyrazol‐1‐yl}isonicotinonitrile)
Polycrystalline [FeL2][BF4]2 (L=2,6‐di(pyrazol‐1‐yl)isonicotinonitrile) exhibits an abrupt hysteretic spin transition near 240 K, with a shoulder on the warming branch whose appearance depends on the sample history. The freshly isolated material is a ca 60 : 40 mixture of triclinic (HS1) and tetragonal (HS2) high‐spin polymorphs, which are structurally closely related. Both HS1 and HS2 undergo a high→low‐spin transition on cooling at 230±10 K. HS1 transforms to a new triclinic low‐spin phase with a doubled unit cell volume (LS3), while HS2 forms a monoclinic low‐spin phase (LS4) with similar unit cell dimensions to HS2. Single crystals of LS3 and LS4 both convert to HS1 on rewarming. The low→high‐spin transition for LS4 is ca 10 K higher in temperature than for LS3, explaining the asymmetric thermal hysteresis. Powder diffraction, calorimetry and magnetic data show that multiple cycling about the spin‐transition leads to slow enrichment of the HS1 and LS3 phases at the expense of HS2 and LS4. That is consistent with the HS2/LS4 fraction of the polycrystalline sample undergoing rare, bifurcated HS2→(LS3+LS4) and LS4→(HS1+HS2) phase transitions. The rate of enrichment of HS1/LS3 differed between these experiments, implying it is sample and/or measurement‐dependent. Three other salts of this iron(II) complex and the coordination polymer [Ag(μ‐L)]BF4 are also briefly described.
- 17 December 2024
- Published by Wiley in Angewandte Chemie
- Vol. 137 (5)
Open AccessStructural Bifurcation in the High→Low‐Spin and Low→High‐Spin Phase Transitions Explains the Asymmetric Spin‐Crossover in [FeL2][BF4]2 (L=2,6‐Di{pyrazol‐1‐yl}isonicotinonitrile)
Polycrystalline [FeL2][BF4]2 (L=2,6‐di(pyrazol‐1‐yl)isonicotinonitrile) exhibits an abrupt hysteretic spin transition near 240 K, with a shoulder on the warming branch whose appearance depends on the sample history. The freshly isolated material is a ca 60 : 40 mixture of triclinic (HS1) and tetragonal (HS2) high‐spin polymorphs, which are structurally closely related. Both HS1 and HS2 undergo a high→low‐spin transition on cooling at 230±10 K. HS1 transforms to a new triclinic low‐spin phase with a doubled unit cell volume (LS3), while HS2 forms a monoclinic low‐spin phase (LS4) with similar unit cell dimensions to HS2. Single crystals of LS3 and LS4 both convert to HS1 on rewarming. The low→high‐spin transition for LS4 is ca 10 K higher in temperature than for LS3, explaining the asymmetric thermal hysteresis. Powder diffraction, calorimetry and magnetic data show that multiple cycling about the spin‐transition leads to slow enrichment of the HS1 and LS3 phases at the expense of HS2 and LS4. That is consistent with the HS2/LS4 fraction of the polycrystalline sample undergoing rare, bifurcated HS2→(LS3+LS4) and LS4→(HS1+HS2) phase transitions. The rate of enrichment of HS1/LS3 differed between these experiments, implying it is sample and/or measurement‐dependent. Three other salts of this iron(II) complex and the coordination polymer [Ag(μ‐L)]BF4 are also briefly described.
- Open Access
- 17 December 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (5) , e202416924
Structural Bifurcation in the High→Low‐Spin and Low→High‐Spin Phase Transitions Explains the Asymmetric Spin‐Crossover in [FeL2][BF4]2 (L=2,6‐Di{pyrazol‐1‐yl}isonicotinonitrile)
Polycrystalline [FeL2][BF4]2 (L=2,6‐di(pyrazol‐1‐yl)isonicotinonitrile) exhibits an abrupt hysteretic spin transition near 240 K, with a shoulder on the warming branch whose appearance depends on the sample history. The freshly isolated material is a ca 60 : 40 mixture of triclinic (HS1) and tetragonal (HS2) high‐spin polymorphs, which are structurally closely related. Both HS1 and HS2 undergo a high→low‐spin transition on cooling at 230±10 K. HS1 transforms to a new triclinic low‐spin phase with a doubled unit cell volume (LS3), while HS2 forms a monoclinic low‐spin phase (LS4) with similar unit cell dimensions to HS2. Single crystals of LS3 and LS4 both convert to HS1 on rewarming. The low→high‐spin transition for LS4 is ca 10 K higher in temperature than for LS3, explaining the asymmetric thermal hysteresis. Powder diffraction, calorimetry and magnetic data show that multiple cycling about the spin‐transition leads to slow enrichment of the HS1 and LS3 phases at the expense of HS2 and LS4. That is consistent with the HS2/LS4 fraction of the polycrystalline sample undergoing rare, bifurcated HS2→(LS3+LS4) and LS4→(HS1+HS2) phase transitions. The rate of enrichment of HS1/LS3 differed between these experiments, implying it is sample and/or measurement‐dependent. Three other salts of this iron(II) complex and the coordination polymer [Ag(μ‐L)]BF4 are also briefly described.
- 17 December 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (5) , e202416924
Open AccessStructural Bifurcation in the High→Low‐Spin and Low→High‐Spin Phase Transitions Explains the Asymmetric Spin‐Crossover in [FeL2][BF4]2 (L=2,6‐Di{pyrazol‐1‐yl}isonicotinonitrile)
Polycrystalline [FeL2][BF4]2 (L=2,6‐di(pyrazol‐1‐yl)isonicotinonitrile) exhibits an abrupt hysteretic spin transition near 240 K, with a shoulder on the warming branch whose appearance depends on the sample history. The freshly isolated material is a ca 60 : 40 mixture of triclinic (HS1) and tetragonal (HS2) high‐spin polymorphs, which are structurally closely related. Both HS1 and HS2 undergo a high→low‐spin transition on cooling at 230±10 K. HS1 transforms to a new triclinic low‐spin phase with a doubled unit cell volume (LS3), while HS2 forms a monoclinic low‐spin phase (LS4) with similar unit cell dimensions to HS2. Single crystals of LS3 and LS4 both convert to HS1 on rewarming. The low→high‐spin transition for LS4 is ca 10 K higher in temperature than for LS3, explaining the asymmetric thermal hysteresis. Powder diffraction, calorimetry and magnetic data show that multiple cycling about the spin‐transition leads to slow enrichment of the HS1 and LS3 phases at the expense of HS2 and LS4. That is consistent with the HS2/LS4 fraction of the polycrystalline sample undergoing rare, bifurcated HS2→(LS3+LS4) and LS4→(HS1+HS2) phase transitions. The rate of enrichment of HS1/LS3 differed between these experiments, implying it is sample and/or measurement‐dependent. Three other salts of this iron(II) complex and the coordination polymer [Ag(μ‐L)]BF4 are also briefly described.
- Open Access
- 9 July 2024
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 457
Advanced one pot photochemical surface modification approach towards graphene materials and their application in dye removal
- 9 July 2024
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 457
Open AccessAdvanced one pot photochemical surface modification approach towards graphene materials and their application in dye removal
- Open Access
- 29 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 12467-12478
Investigation of the Dynamic Behaviour of H2 and D2 in a Kinetic Quantum Sieving System
Porous organic cages (POCs) are nanoporous materials composed of discrete molecular units that have uniformly distributed functional pores. The intrinsic porosity of these structures can be tuned accurately at the nanoscale by altering the size of the porous molecules, particularly to an optimal size of 3.6 angstrom to harness the kinetic quantum sieving effect. Previous research on POCs for isotope separation has predominantly centered on differences in the quantities of adsorbed isotopes. However, nuclear quantum effects also contribute significantly to the dynamics of the sorption process, offering additional opportunities for separating H-2 and D-2 at practical operational temperatures. In this study, our investigations into H-2 and D-2 sorption on POC samples revealed a higher uptake of D-2 compared to that of H-2 under identical conditions. We employed quasi-elastic neutron scattering to study the diffusion processes of D-2 and H-2 in the POCs across various temperature and pressure ranges. Additionally, neutron Compton scattering was utilized to measure the values of the nuclear zero-point energy of individual isotopic species in D-2 and H-2. The results indicate that the diffusion coefficient of D-2 is approximately one-sixth that of H-2 in the POC due to the nuclear quantum effect. Furthermore, the results reveal that at 77 K, D-2 has longer residence times compared to H-2 when moving from pore to pore. Consequently, using the kinetic difference of H-2 and D-2 in a porous POC system enables hydrogen isotope separation using a temperature or pressure swing system at around liquid nitrogen temperatures.
- 29 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 12467-12478
Open AccessInvestigation of the Dynamic Behaviour of H2 and D2 in a Kinetic Quantum Sieving System
Porous organic cages (POCs) are nanoporous materials composed of discrete molecular units that have uniformly distributed functional pores. The intrinsic porosity of these structures can be tuned accurately at the nanoscale by altering the size of the porous molecules, particularly to an optimal size of 3.6 angstrom to harness the kinetic quantum sieving effect. Previous research on POCs for isotope separation has predominantly centered on differences in the quantities of adsorbed isotopes. However, nuclear quantum effects also contribute significantly to the dynamics of the sorption process, offering additional opportunities for separating H-2 and D-2 at practical operational temperatures. In this study, our investigations into H-2 and D-2 sorption on POC samples revealed a higher uptake of D-2 compared to that of H-2 under identical conditions. We employed quasi-elastic neutron scattering to study the diffusion processes of D-2 and H-2 in the POCs across various temperature and pressure ranges. Additionally, neutron Compton scattering was utilized to measure the values of the nuclear zero-point energy of individual isotopic species in D-2 and H-2. The results indicate that the diffusion coefficient of D-2 is approximately one-sixth that of H-2 in the POC due to the nuclear quantum effect. Furthermore, the results reveal that at 77 K, D-2 has longer residence times compared to H-2 when moving from pore to pore. Consequently, using the kinetic difference of H-2 and D-2 in a porous POC system enables hydrogen isotope separation using a temperature or pressure swing system at around liquid nitrogen temperatures.
- Open Access
- 30 December 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (1) , 159-169
Electrothermal Transformations within Graphene-Based Aerogels through High-Temperature Flash Joule Heating
Flash Joule heating of highly porous graphene oxide (GO) aerogel monoliths to ultrahigh temperatures is exploited as a low carbon footprint technology to engineer functional aerogel materials. Aerogel Joule heating to up to 3000 K is demonstrated for the first time, with fast heating kinetics (∼300 K·min-1), enabling rapid and energy-efficient flash heating treatments. The wide applicability of ultrahigh-temperature flash Joule heating is exploited in a range of material fabrication challenges. Ultrahigh-temperature Joule heating is used for rapid graphitic annealing of hydrothermal GO aerogels at fast time scales (30-300 s) and substantially reduced energy costs. Flash aerogel heating to ultrahigh temperatures is exploited for the in situ synthesis of ultrafine nanoparticles (Pt, Cu, and MoO2) embedded within the hybrid aerogel structure. The shockwave heating approach enables high through-volume uniformity of the formed nanoparticles, while nanoparticle size can be readily tuned through controlling Joule-heating durations between 1 and 10 s. As such, the ultrahigh-temperature Joule-heating approach introduced here has important implications for a wide variety of applications for graphene-based aerogels, including 3D thermoelectric materials, extreme temperature sensors, and aerogel catalysts in flow (electro)chemistry.
- 30 December 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (1) , 159-169
Open AccessElectrothermal Transformations within Graphene-Based Aerogels through High-Temperature Flash Joule Heating
Flash Joule heating of highly porous graphene oxide (GO) aerogel monoliths to ultrahigh temperatures is exploited as a low carbon footprint technology to engineer functional aerogel materials. Aerogel Joule heating to up to 3000 K is demonstrated for the first time, with fast heating kinetics (∼300 K·min-1), enabling rapid and energy-efficient flash heating treatments. The wide applicability of ultrahigh-temperature flash Joule heating is exploited in a range of material fabrication challenges. Ultrahigh-temperature Joule heating is used for rapid graphitic annealing of hydrothermal GO aerogels at fast time scales (30-300 s) and substantially reduced energy costs. Flash aerogel heating to ultrahigh temperatures is exploited for the in situ synthesis of ultrafine nanoparticles (Pt, Cu, and MoO2) embedded within the hybrid aerogel structure. The shockwave heating approach enables high through-volume uniformity of the formed nanoparticles, while nanoparticle size can be readily tuned through controlling Joule-heating durations between 1 and 10 s. As such, the ultrahigh-temperature Joule-heating approach introduced here has important implications for a wide variety of applications for graphene-based aerogels, including 3D thermoelectric materials, extreme temperature sensors, and aerogel catalysts in flow (electro)chemistry.
- Open Access
- 11 November 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (12) , 8978-8990
Universality of Hair as a Nucleant: Exploring the Effects of Surface Chemistry and Topography
The ability to control crystal nucleation through the simple addition of a nucleating agent (nucleant) is desirable for a huge range of applications. However, effective nucleating agents are known for only a small number of systems, and many questions remain about the mechanisms by which they operate. Here, we explore the features that make an effective nucleant and demonstrate that the biological material hair-which naturally possesses a chemically and topographically complex surface structure-has excellent potential as an effective nucleating agent. Crystallization of poorly soluble compounds in the presence of hairs from a range of mammals shows that nucleation preferentially occurs at the cuticle step edges, while a novel microdroplet-based methodology was used to quantify the nucleating activities of different hairs. This showed that the activities of the hairs can be tuned over a wide range using chemical treatments. Analysis of the hair structure and composition using atomic force microscopy, scanning ion conductance microscopy, and X-ray photoelectron spectroscopy demonstrates that surface chemistry, surface topography, and surface charge all act in combination to create effective nucleation sites. This work therefore contributes to our understanding of heterogeneous nucleating agents and shows that surface topography as well as surface chemistry can be used in the design or selection of universal nucleating agents.
- 11 November 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (12) , 8978-8990
Open AccessUniversality of Hair as a Nucleant: Exploring the Effects of Surface Chemistry and Topography
The ability to control crystal nucleation through the simple addition of a nucleating agent (nucleant) is desirable for a huge range of applications. However, effective nucleating agents are known for only a small number of systems, and many questions remain about the mechanisms by which they operate. Here, we explore the features that make an effective nucleant and demonstrate that the biological material hair-which naturally possesses a chemically and topographically complex surface structure-has excellent potential as an effective nucleating agent. Crystallization of poorly soluble compounds in the presence of hairs from a range of mammals shows that nucleation preferentially occurs at the cuticle step edges, while a novel microdroplet-based methodology was used to quantify the nucleating activities of different hairs. This showed that the activities of the hairs can be tuned over a wide range using chemical treatments. Analysis of the hair structure and composition using atomic force microscopy, scanning ion conductance microscopy, and X-ray photoelectron spectroscopy demonstrates that surface chemistry, surface topography, and surface charge all act in combination to create effective nucleation sites. This work therefore contributes to our understanding of heterogeneous nucleating agents and shows that surface topography as well as surface chemistry can be used in the design or selection of universal nucleating agents.
- Open Access
- 18 May 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (11) , 4910-4923
Positively Charged Additives Facilitate Incorporation in Inorganic Single Crystals
Incorporation of guest additives within inorganic single crystals offers a unique strategy for creating nanocomposites with tailored properties. While anionic additives have been widely used to control the properties of crystals, their effective incorporation remains a key challenge. Here, we show that cationic additives are an excellent alternative for the synthesis of nanocomposites, where they are shown to deliver exceptional levels of incorporation of up to 70 wt % of positively charged amino acids, polymer particles, gold nanoparticles, and silver nanoclusters within inorganic single crystals. This high additive loading endows the nanocomposites with new functional properties, including plasmon coupling, bright fluorescence, and surface-enhanced Raman scattering (SERS). Cationic additives are also shown to outperform their acidic counterparts, where they are highly active in a wider range of crystal systems, owing to their outstanding colloidal stability in the crystallization media and strong affinity for the crystal surfaces. This work demonstrates that although often overlooked, cationic additives can make valuable crystallization additives to create composite materials with tailored composition-structure-property relationships. This versatile and straightforward approach advances the field of single-crystal composites and provides exciting prospects for the design and fabrication of new hybrid materials with tunable functional properties.
- 18 May 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (11) , 4910-4923
Open AccessPositively Charged Additives Facilitate Incorporation in Inorganic Single Crystals
Incorporation of guest additives within inorganic single crystals offers a unique strategy for creating nanocomposites with tailored properties. While anionic additives have been widely used to control the properties of crystals, their effective incorporation remains a key challenge. Here, we show that cationic additives are an excellent alternative for the synthesis of nanocomposites, where they are shown to deliver exceptional levels of incorporation of up to 70 wt % of positively charged amino acids, polymer particles, gold nanoparticles, and silver nanoclusters within inorganic single crystals. This high additive loading endows the nanocomposites with new functional properties, including plasmon coupling, bright fluorescence, and surface-enhanced Raman scattering (SERS). Cationic additives are also shown to outperform their acidic counterparts, where they are highly active in a wider range of crystal systems, owing to their outstanding colloidal stability in the crystallization media and strong affinity for the crystal surfaces. This work demonstrates that although often overlooked, cationic additives can make valuable crystallization additives to create composite materials with tailored composition-structure-property relationships. This versatile and straightforward approach advances the field of single-crystal composites and provides exciting prospects for the design and fabrication of new hybrid materials with tunable functional properties.
- 3 November 2021
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (12) , 7104-7115
Solvent-Mediated Enhancement of Additive-Controlled Crystallization
- 3 November 2021
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (12) , 7104-7115
Solvent-Mediated Enhancement of Additive-Controlled Crystallization
- 22 July 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (30) , 36201-36212
Facile Synthesis of Electrically Conductive and Heatable Nanoparticle/Nanocarbon Hybrid Aerogels
Joule heating studies on nanoparticle/nanocarbon hybrid aerogels have been reported, but systematic investigations on hydrotalcite-derived catalysts supported onto reduced graphene oxide (rGO) aerogels are rare. In this study, hydrotalcite-derived Cu-Al2O3 nanoparticles were incorporated into a porous and multifunctional rGO aerogel support for fabricating electrically conducting Cu-Al2O3/rGO hybrid aerogels, and their properties were investigated in detail. The hybridization of Cu-Al2O3 with a 3D nanocarbon support network imparts additional functionalities to the widely used functional inorganic nanoparticles, such as direct electrical framework heating and easy regeneration and separation of spent nanoparticles, with well-spaced nanoparticle segregation. 3D variable-range hopping model fitting confirmed that electrons were able to reach the entire aerogel to enable uniform resistive heating. The conductivity of the nanocarbon support framework facilitates uniform and fast heating (up to 636 K/min) of the embedded nanoparticles at very low energy consumption, while the large porosity and high thermal conductivity enable efficient heat dissipation during natural cooling (up to 336 K/min). The thermal stability of the hybrid aerogel was demonstrated by repeated heating/cooling cycling at different temperatures that were relevant to important industrial applications. The facile synthetic approach can be easily adapted to fabricate other types of multifunctional nanoparticle/nanocarbon hybrid aerogels, such as the MgAl-MMO/rGO aerogel and the Ni-Al2O3/rGO aerogel. These findings open up new routes to the functionalization of inorganic nanoparticles and extend their application ranges that involve electrical/thermal heating, temperature-dependent catalysis, sorption, and sensing.
- 22 July 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (30) , 36201-36212
Facile Synthesis of Electrically Conductive and Heatable Nanoparticle/Nanocarbon Hybrid Aerogels
Joule heating studies on nanoparticle/nanocarbon hybrid aerogels have been reported, but systematic investigations on hydrotalcite-derived catalysts supported onto reduced graphene oxide (rGO) aerogels are rare. In this study, hydrotalcite-derived Cu-Al2O3 nanoparticles were incorporated into a porous and multifunctional rGO aerogel support for fabricating electrically conducting Cu-Al2O3/rGO hybrid aerogels, and their properties were investigated in detail. The hybridization of Cu-Al2O3 with a 3D nanocarbon support network imparts additional functionalities to the widely used functional inorganic nanoparticles, such as direct electrical framework heating and easy regeneration and separation of spent nanoparticles, with well-spaced nanoparticle segregation. 3D variable-range hopping model fitting confirmed that electrons were able to reach the entire aerogel to enable uniform resistive heating. The conductivity of the nanocarbon support framework facilitates uniform and fast heating (up to 636 K/min) of the embedded nanoparticles at very low energy consumption, while the large porosity and high thermal conductivity enable efficient heat dissipation during natural cooling (up to 336 K/min). The thermal stability of the hybrid aerogel was demonstrated by repeated heating/cooling cycling at different temperatures that were relevant to important industrial applications. The facile synthetic approach can be easily adapted to fabricate other types of multifunctional nanoparticle/nanocarbon hybrid aerogels, such as the MgAl-MMO/rGO aerogel and the Ni-Al2O3/rGO aerogel. These findings open up new routes to the functionalization of inorganic nanoparticles and extend their application ranges that involve electrical/thermal heating, temperature-dependent catalysis, sorption, and sensing.