MCMing Chen

Ming Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ming Chen has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • N-Doped Mesoporous Carbon Film with Pinned Carbon Nanotube as Free-Standing Anode for Fast-Charging Li-Ion Batteries

    by Ming Chen, Wen-Li Shi, Yu-Fang Li, Yuan-Yuan Yang, Rong Wan, Xing Zhang, Xing Qian, Zhong-Yong Yuan, Chun-Sheng Li

    A N-doped mesoporous carbon film with a pinned carbon nanotube was prepared by a hydrothermal soft-template self-assembly and metal-catalyzed graphitization approach, using phenolic resin/dicyandiamide as the solid carbon and nitrogen sources and F127 micelles as a mesoporous template. The thickness of the mesoporous carbon membrane was determined by the polymerization degree of phenolic resin and was adjustable by tuning the reagent concentration in the hydrothermal reaction. These NMCF-NCNT films show a high graphitization degree, large specific surface area, rich nitrogen dopant, and high mechanical strength. Importantly, the NCNT grown on the mesoporous carbon film constructs a conductive pathway between the carbon film and coin cell, and the mesopores in NMCF accelerate the electrolyte diffusion when NMCF-NCNT films are applied as free-standing anodes in LiBs. The NMCF-NCNT-1 with a thickness of 1 μm delivered the optimum electrochemical properties of 750 mAh g–1 at 0.1 A g–1, 578 mAh g–1 at 5 A g–1 after 30 cycles, and 661 mAh g–1 at 1 A g–1 after 600 cycles. Such good electrochemical performance could be attributed to the thinnest NMCF-NCNT-1 membrane granting high electrical conductivity, fast Li+ diffusion, and preeminent structural stabilization. This work aims at the preparation of a self-supporting-structured mesoporous carbon film with pinned carbon nanotube, the regulation of micro-nanostructure, and the optimization of electrochemical performance, which may gain a new insight into the design of free-standing carbon membrane electrodes for fast-charging LiBs.

  • Synergy of Cobalt Single Atoms and Mesoporous Single-Layered Molybdenum Sulfide/Carbon Composites for Enhanced Sodium Ion Storage

    by Xing Zhang, Mengyao Guo, Bei Lv, Hao Gu, Jiaxi Yang, Qing Li, Xiaoyan Pei, Ming Chen, Chao Li, Yuhao Peng

    Molybdenum disulfide (MoS2)-based nanomaterials are considered promising anodes for sodium-ion batteries (SIBs), but their practical application remains constrained by sluggish electrochemical kinetics and structural degradation induced by irreversible compositional conversion. Herein, we propose a synergistic interfacial engineering strategy that integrates atomically dispersed cobalt single-atom catalytic sites within a nitrogen-doped, mesoporous single-layered molybdenum sulfide/carbon hybrid architecture (SA Co-MoS2/C) via a versatile dual-template synthesis. Advanced structural characterizations and X-ray absorption spectroscopy reveal that the incorporation of Co single-atom sites triggers a partial semiconducting 2H-to-metallic 1T phase transition and drives substantial electron transfer from Co sites to the MoS2/C substrate. Consequently, the optimized SA Co-MoS2/C electrode delivers exceptional electrochemical performance, featuring a superior rate capability of 130 mAh g−1 at 6.0 A g−1 and robust cycling stability with a retained capacity of ∼300 mAh g−1 after 1000 cycles at 2.0 A g−1. These substantial performance enhancements are fundamentally attributed to the synergistic effects of single-atom catalytic sites and single-layered MoS2/C nanostructure, which collectively accelerate reaction kinetics and ensure highly reversible conversion chemistry. This work provides a compelling paradigm for precise interfacial regulation in transition metal dichalcogenides, offering valuable insights for designing high-performance energy storage materials.


  • Tailoring Mesoporous MoSeS Nanosheets/Carbon Hybrids via Heterointerface and Structural Engineering for Rapid Lithium and Sodium Storage

    by Xing Zhang, Mengyao Guo, Yuan Zhang, Bei Lv, Qing Li, Chao Li, Yu Zhang, Ming Chen

    Lamellar MoSe2-based materials are considered promising anodes for lithium/sodium storage. However, their further applications are impeded by the sluggish transport dynamics, the intrinsically low conductivity, and the unavoidable volume variation. Herein, a sulfur-doped MoSe2 nanosheet/carbon mesoporous composite (MoSeS/C) was synthesized via a heterointerface and structural engineering strategy for rapid lithium/sodium storage. The engineered MoSeS/C mesoporous composite precisely tailors its electronic structure while effectively accommodating volume fluctuations of the electrode. Specifically, the open pore structure and large surface area of MoSeS/C provide abundant active sites, promote efficient electrolyte penetration, and accelerate ion/electron diffusion. Notably, sulfur atom doping effectively enlarges the interlayer spacing of lamellar MoSe2 nanosheets, further generating enough active sites for Li+/Na+ storage. The mesoporous carbon framework concurrently improves both the conductivity and structural integrity of the electrode. By virtue of the above merits, the MoSeS/C electrode displays a substantial capacity of 815 mAh g–1 at 0.5 A g–1 for lithium storage and 363 mAh g–1 at 0.1 A g–1 for sodium storage after 100 cycles. Additionally, to deepen the understanding of the reaction mechanism and the origins of the outstanding electrochemical properties of the MoSeS/C electrode, the transfer kinetics, morphology, and chemical states of MoSeS/C at different states are further investigated via a series of ex situ characterizations.


  • In-situ synthesis of TiN–Ni3N/NCNT tube-in-tube heterojunction as a high-efficiency catalyst for alkaline hydrogen evolution reaction

    by Ming Chen, Ming-Yang Zhao, Rong Wan, Xing Qian, Zhong-Yong Yuan, Chun-Sheng Li, Xing Zhang, Meng-Yi Wang, Jiao-Jiao Xin


  • Mesoporous Ni3S2@Ni-incorporated and N-doped carbon nanohorn-carbon nanosheets: heterostructure construction and electron modulation for an efficient electrocatalyst for the oxygen evolution reaction

    by Ming Chen, Ming-Yang Zhao, Feng-Ming Liu, Rong Wan, Xing Qian, Xing Zhang, Zhong-Yong Yuan, Chun-Sheng Li, Xiao-Yun Li

    Mesoporous Ni3S2@Ni-incorporated and N-doped carbon nanohorn-carbon nanosheets were explored for efficient oxygen evolution reaction.


  • Controlled Synthesis of Fe3N Sandwiched in Nitrogen-Doped Multilayer Graphene as an Anode Material for Lithium-Ion Batteries

    by Ming-Yang Zhao, Feng-Ming Liu, Ming Chen, Xing Zhang, Xing Qian, Zhong-Yong Yuan, Rong Wan, Chun-Sheng Li, Wen-Xue Yue


  • Synthesis of helical carbon nanotubes wrapped around Ni2P1−xOx nanoparticle-incorporated carbon nanoribbons as an efficient electrocatalyst for the hydrogen evolution reaction

    by Ming Chen, Ming-Yang Zhao, Feng-Ming Liu, Kai Zhang, Xing Qian, Zhong-Yong Yuan, Yan Sun, Chun-Sheng Li, Rong Wan

    Helical CNTs wrapped around Ni2P1−xOx nanoparticle-incorporated carbon nanoribbons were prepared by nickel-catalysis and phosphatization.


  • Dual Regulation of Anion Vacancy-Modified MoSSe Nanosheets in Mesoporous Carbon Nanospheres for High-Performance Sodium Storage

    by Xing Zhang, Bei Lv, Mengyao Guo, Hao Gu, Jiaxi Yang, Yue Zhu, Qing Li, Ming Chen, Chao Li

    Owing to their layered structure and higher theoretical specific capacity, MoS2-based materials have evoked tremendous attention for sodium storage. However, their sluggish ionic transport dynamics and unavoidable volume variation always lead to an unsatisfactory electrochemical performance, thereby hindering their further development. Herein, the Se-doped MoS2 nanosheets confined in hollow mesoporous carbon nanospheres (MoSSe@C) were successfully prepared via a synergistic strategy combining defect design and structure optimization. Thereinto, the larger Se atom doping could regulate the crystal structure and provide abundant defects, leading to increased conductivity, fast diffusion kinetics, and abundant active sites. Besides, it also could effectively expand the interlamellar spacing of the internal MoS2 nanosheets, thereby releasing more intrafacial active sites for sodium storage. The external hollow mesoporous carbon nanospheres effectively adapt the volume fluctuation of the MoSSe@C electrode during the repeated cycling. Furthermore, the interior anion defects induced by Se doping and exterior HMCs synergistically boost the conductivity and fasten the redox kinetics of the MoSSe@C electrode. As a result, the electronic structure is tailored both internally and externally, thereby contributing greatly to the rapid reaction dynamics. Thus, the MoSSe@C electrode exhibits a favorable performance (450/150 mAh g-1 at 0.1 A g-1) in half/full cells, respectively.


  • Structural Reconstruction via Carbon Nanotube Spatially Confined Metal Catalysis: A Morphology-Controlled Approach to Convert Polycyclic Aromatic Hydrocarbon into Carbon Nanofibers for Highly Active Anodes in Li-Ion Batteries

    by Ming Chen, Ming-Yang Zhao, Ke Liu, Feng-Ming Liu, Zhong-Yong Yuan, Xing Qian, Rong Wan, Chun-Sheng Li, Ai-Xiang Ding

    By a carbon nanotube (CNT) spatially confined metal-catalyzed structural reconstruction, carbon nanofibers (CNFs) with a hollow, hollow-solid, solid graphite core, and CNT shell are prepared using nitrogen heterocycle (NHC) and polycyclic aromatic hydrocarbon (PAH) as carbon sources. The formation mechanism of CNFs with oriented graphene layers and enlarged intergraphene spacing is studied by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction analysis. It revealed that this one-dimensional nanoconfined metal-catalyzed carbon rearrangement is totally different from the reported spatially localized metal-catalyzed graphitization of electrospun polymer and nanocasted carbohydrate nanofibers, as the graphene orientation, cavity volume, and interlayer distance of CNFs can be controlled by the carbon concentration-related competitive metal-catalyzed tip growth of latitudinal and longitudinal graphene layers from NHC and PAH. The unique CNF structure renders good electronic/ionic conductivity, abundant Li+ storage interlayer gaps, and robust mechanical durability, resulting in outstanding electrochemical properties as anodes in lithium-ion batteries. The optimum CNF anode delivers a stable discharge capacity of 475 mA h g-1 at 0.1 C, an extraordinary rate capability of 303 mA h g-1 at 5 C, and a remarkable long-term cycling stability of 378 mA h g-1 after 600 cycles at 1 C. This 1D nanoconfined metal catalysis synthesis could be useful for the development of efficient CNF anodes in many electrochemical reactions with a potential for industrial applications.


  • Rational Synthesis of Spongy Fe3N@N-Doped Carbon Nanorods with Controlled Topography and Porosity for Enhanced Energy Storage Anodes in Lithium-Ion Batteries

    by Ming Chen, Feng-Ming Liu, Ming-Yang Zhao, Xing Qian, Lei Liu, Rong Wan, Zhong-Yong Yuan, Chun-Sheng Li, Qing-Yuan Niu

    Iron nitrides with the merits of high theoretical capacities, cost-effectiveness, and good electronic/ionic conductivity have been recognized as attractive anode candidates for lithium-ion batteries (LIBs). Carbon compositing, pore engineering, and nanostructure construction have proved to be effective strategies to prepare high-performance metal nitride anodes for LIBs. Herein, we synthesized a series of Fe3N-embedded and N-doped carbon nanorods (Fe3N@NCNR) with a hierarchical porous system and controllable topography by metal-catalyzed graphitization-nitridization of the Fe(III)-triazole framework (Fe-MOF) and thermal evaporation of the triblock copolymer F127 template assembled in Fe-MOF via hydrogen bonding interaction, followed by the air oxidation and urea-assisted ammonolysis processes. The Fe3N@NCNR as anodes for LIBs display extraordinary lithium storage capabilities with a high reversible capacity of 830 mA h g-1 at 0.1 C, a good rate performance of 576 mAh g-1 at 5 C, and a long-term cycling stability of 742 mA h g-1 over 600 cycles at 1 C. Such outstanding performance benefits from the spongy carbon nanorods with rich macropores for rapid electronic/ionic transport and effective accommodation of electrode volume expansion, abundant N-doped meso-/microporous carbon for the additional storage of Li+ via capacitive effect, and the efficient utilization of Fe3N nanoparticles uniformly distributed through carbon nanorods. Importantly, this work introduces an effective strategy to construct superior performance nitride anodes from MOF surfactants based on hydrogen bonding-driven interface self-assembly and provides insight into the preparation of highly efficient nanoarchitectures for Li+ storage.