David Mamunts
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David Mamunts has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Anatoliy Nyrkov
Admiral Makarov State University of Maritime and Inland Shipping
6 shared publications - Sergei Sokolov
Admiral Makarov State University of Maritime and Inland Shipping
6 shared publications - Sergei Chernyi
Department of Cyber-Physical Systems, St. Petersburg State Marine Technical University, 190121 Saint-Petersburg, Russia
4 shared publications - Антон Александрович Жиленков
Department of Cyber-Phisical Systems, Saint Petersburg Marine Technical University “SMTU”, Leninsky pr. 101, 198303 Saint Petersburg, Russia
2 shared publications A. Zhukov Vladimir
Chair of Complex Provision of Information Security, Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russia
1 shared publicationAlexander V. Sauchev
Chair of Complex Provision of Information Security, Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russia
1 shared publication
Latest Publications
- Open Access
Dynamics Models of Synchronized Piecewise Linear Discrete Chaotic Systems of High Order
This paper deals with the methods for investigating the nonlinear dynamics of discrete chaotic systems (DCS) applied to piecewise linear systems of the third order. The paper proposes an approach to the analysis of the systems under research and their improvement. Thus, effective and mathematically sound methods for the analysis of nonlinear motions in the models under consideration are proposed. It makes it possible to obtain simple calculated relations for determining the basic dynamic characteristics of systems. Based on these methods, the authors developed algorithms for calculating the dynamic characteristics of discrete systems, i.e. areas of the existence of steady-state motion, areas of stability, capture band, and parameters of transients. By virtue of the developed methods and algorithms, the dynamic modes of several models of discrete phase synchronization systems can be analyzed. They are as follows: Pulsed and digital different orders, dual-ring systems of various types, including combined ones, and systems with cyclic interruption of auto-tuning. The efficiency of various devices for information processing, generation and stabilization could be increased by using the mentioned discrete synchronization systems on the grounds of the results of the analysis. We are now developing original software for analyzing the dynamic characteristics of various classes of discrete phase synchronization systems, based on the developed methods and algorithms.
Open AccessDynamics Models of Synchronized Piecewise Linear Discrete Chaotic Systems of High Order
This paper deals with the methods for investigating the nonlinear dynamics of discrete chaotic systems (DCS) applied to piecewise linear systems of the third order. The paper proposes an approach to the analysis of the systems under research and their improvement. Thus, effective and mathematically sound methods for the analysis of nonlinear motions in the models under consideration are proposed. It makes it possible to obtain simple calculated relations for determining the basic dynamic characteristics of systems. Based on these methods, the authors developed algorithms for calculating the dynamic characteristics of discrete systems, i.e. areas of the existence of steady-state motion, areas of stability, capture band, and parameters of transients. By virtue of the developed methods and algorithms, the dynamic modes of several models of discrete phase synchronization systems can be analyzed. They are as follows: Pulsed and digital different orders, dual-ring systems of various types, including combined ones, and systems with cyclic interruption of auto-tuning. The efficiency of various devices for information processing, generation and stabilization could be increased by using the mentioned discrete synchronization systems on the grounds of the results of the analysis. We are now developing original software for analyzing the dynamic characteristics of various classes of discrete phase synchronization systems, based on the developed methods and algorithms.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 73-76
Development of an automated system for managing and optimizing management decisions in the design, organization and production of dredging
One of the most important problems of inland waterway transport is the provision of guaranteed navigable depths. Currently, there is an active construction and expansion of existing ports and port complexes, carrying out repairs. Taking into account the need for prompt and effective production of underwater earthworks, the importance of conducting high-quality automation of the main processes is increasing. At the same time, the factor of growth in the volume of dredging works naturally requires the use of more productive equipment and modern hi-technologies methods. As one of the options of solving the actual problem of increasing the productivity of existing dredgers, is to consider the developing of automated system for managing and optimizing management decisions in the design, organization and production of dredging. The aim - is the creation of a tool that allows dredging companies and state dredging customers to obtain the widest possible information about the process and the interrelationships of various parameters of the projected works. Propose, on the basis of the created mathematical model, the ways of solving design tasks and tasks arising in the process of production and operation of waterways.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 73-76
Development of an automated system for managing and optimizing management decisions in the design, organization and production of dredging
One of the most important problems of inland waterway transport is the provision of guaranteed navigable depths. Currently, there is an active construction and expansion of existing ports and port complexes, carrying out repairs. Taking into account the need for prompt and effective production of underwater earthworks, the importance of conducting high-quality automation of the main processes is increasing. At the same time, the factor of growth in the volume of dredging works naturally requires the use of more productive equipment and modern hi-technologies methods. As one of the options of solving the actual problem of increasing the productivity of existing dredgers, is to consider the developing of automated system for managing and optimizing management decisions in the design, organization and production of dredging. The aim - is the creation of a tool that allows dredging companies and state dredging customers to obtain the widest possible information about the process and the interrelationships of various parameters of the projected works. Propose, on the basis of the created mathematical model, the ways of solving design tasks and tasks arising in the process of production and operation of waterways.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 69-72
The use of authentication technology blockchain platform for the marine industry
Recently, 80% of banks admitted that they are already developing products based on this technology. The use of blockchain technology in other areas. Storage at the distribution cloud. Multiple copies in different parts of the network, the system is much safer; identity management. Identifier based on the blockchain that will replace usernames and passwords of online users; registration and verification of data. Constant control register is significantly more secure than traditional databases and etc. The respect and popularity of the blockchain in Russia. Research in this area by the Central Bank and the Ministry of communications, the representatives of these agencies have repeatedly stated. The planned creation of a nationwide automated system of accounting and information processing. Private business is moving in the same direction, there are already a number of projects. Trade and many other areas of our lives in the near future may become fully automated.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 69-72
The use of authentication technology blockchain platform for the marine industry
Recently, 80% of banks admitted that they are already developing products based on this technology. The use of blockchain technology in other areas. Storage at the distribution cloud. Multiple copies in different parts of the network, the system is much safer; identity management. Identifier based on the blockchain that will replace usernames and passwords of online users; registration and verification of data. Constant control register is significantly more secure than traditional databases and etc. The respect and popularity of the blockchain in Russia. Research in this area by the Central Bank and the Ministry of communications, the representatives of these agencies have repeatedly stated. The planned creation of a nationwide automated system of accounting and information processing. Private business is moving in the same direction, there are already a number of projects. Trade and many other areas of our lives in the near future may become fully automated.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 61-65
Advantages of networking and distance learning use in maritime education and training
This paper presents the educational potentials of networking and distance learning use in the system of maritime education and training. Application of network in educational process provides opportunities to train for high-risk professions such as shipping, aviation and others. The controlled networking environment also has pedagogical advantages, due to the fact that material to study can be designed to train and assess specific learning outcomes in a way that is adjusted to the level of the students' developing competency. The proposed in the paper situational and functional approach is the attempt to give an extra tool for developing innovative methods of the maritime education and training system with wide use of networking and distance learning.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 61-65
Advantages of networking and distance learning use in maritime education and training
This paper presents the educational potentials of networking and distance learning use in the system of maritime education and training. Application of network in educational process provides opportunities to train for high-risk professions such as shipping, aviation and others. The controlled networking environment also has pedagogical advantages, due to the fact that material to study can be designed to train and assess specific learning outcomes in a way that is adjusted to the level of the students' developing competency. The proposed in the paper situational and functional approach is the attempt to give an extra tool for developing innovative methods of the maritime education and training system with wide use of networking and distance learning.
- Open Access
- 26 April 2017
- Published by Walter de Gruyter GmbH in Transport and Telecommunication Journal
- Vol. 18 (2) , 139-145
Models and Algorithms for Estimation and Minimization of the Risks Associated with Dredging
There are a lot of models and algorithms to minimize risks during dredging operations and they are not without drawbacks. The paper describes the authors’ approach to solving this problem. Mathematical models are proposed and on their basis software is developed. Methods of the risk theory are used to minimize the risks. In this paper a consequence of influence refers to the deviation from the goal expressed in the expected results and the deviation of certain criterion factors. In this case, we mean any measure of quality. In its turn, risk factors reduce criterion factors. These factors are divided into categories - general transportation risks and risks of transporting ground. In these categories, one may derive the following risks - incidents at transport resulting from the impact of a set of random factors including the human one. For risk analysis and management, in addition to identifying critical chains of risk situations, the stochastic model for evaluating the chains is set forth. In order to implement this algorithm, the mathematical package Maple is used, which allows for conducting the required calculations with a software package including the Graph Theory. The paper presents fragments of the code listing.
- 26 April 2017
- Published by Walter de Gruyter GmbH in Transport and Telecommunication Journal
- Vol. 18 (2) , 139-145
Open AccessModels and Algorithms for Estimation and Minimization of the Risks Associated with Dredging
There are a lot of models and algorithms to minimize risks during dredging operations and they are not without drawbacks. The paper describes the authors’ approach to solving this problem. Mathematical models are proposed and on their basis software is developed. Methods of the risk theory are used to minimize the risks. In this paper a consequence of influence refers to the deviation from the goal expressed in the expected results and the deviation of certain criterion factors. In this case, we mean any measure of quality. In its turn, risk factors reduce criterion factors. These factors are divided into categories - general transportation risks and risks of transporting ground. In these categories, one may derive the following risks - incidents at transport resulting from the impact of a set of random factors including the human one. For risk analysis and management, in addition to identifying critical chains of risk situations, the stochastic model for evaluating the chains is set forth. In order to implement this algorithm, the mathematical package Maple is used, which allows for conducting the required calculations with a software package including the Graph Theory. The paper presents fragments of the code listing.
- Open Access
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 178, 507-514
Robust Method for Protecting Electronic Document on Waterway Transport with Steganographic Means by Embedding Digital Watermarks into Images
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 178, 507-514
Open AccessRobust Method for Protecting Electronic Document on Waterway Transport with Steganographic Means by Embedding Digital Watermarks into Images
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 16, 641-645
Identification and tracking problems in qualimetry inspections in distributed control systems of drilling platforms
The authors consider an issue of reliable and efficient performance of offshore drilling platforms. It was found that one of the reasons for degrading the factors under review was poor quality of the electric energy generated by a local power-constrained plant when operating for heavy energy converters as well as imperfection of the actuating system controlling quality factors. In order to develop new methods or upgrade known ones and ways of improving quality of performance of the systems under examination, it is required to solve the qualimetry problems. In its turn, this requires solving the problem of identification of the structure of this system and on-line monitoring of changes in its parameters and signals. The modern drilling platform's electric power systems are characterized by the presence in its composition of a great number of the load that has a negative impact on the supplying network of the alternating current, generating into it highest harmonic components of currents and voltages. A great deal of drilling platform's automation systems apply the line currents and voltages to form the reference signal. It is known that filter-compensating devices are the most efficient means to increase the quality of electric energy in the autonomous power supply systems at the moment. Their efficiency in higher harmonic suppression and compensation of their volt-ampere reactive may be provided only with the high accuracy of the calculation of parameters in the target harmonics of the line currents and voltages. And as harmonic composition periodically varies depending on the regime of operation and the composition of load of the electric power station, the settings of filtering devices should be changed constantly, that can be done by means of identification and on-line monitoring processes. The authors have proposed a candidate solution for such a problem through the example of identification and synthesis of the system of measuring system performance indicators required to appraise the electric power quality in this system and, as consequence, performance quality.
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 16, 641-645
Identification and tracking problems in qualimetry inspections in distributed control systems of drilling platforms
The authors consider an issue of reliable and efficient performance of offshore drilling platforms. It was found that one of the reasons for degrading the factors under review was poor quality of the electric energy generated by a local power-constrained plant when operating for heavy energy converters as well as imperfection of the actuating system controlling quality factors. In order to develop new methods or upgrade known ones and ways of improving quality of performance of the systems under examination, it is required to solve the qualimetry problems. In its turn, this requires solving the problem of identification of the structure of this system and on-line monitoring of changes in its parameters and signals. The modern drilling platform's electric power systems are characterized by the presence in its composition of a great number of the load that has a negative impact on the supplying network of the alternating current, generating into it highest harmonic components of currents and voltages. A great deal of drilling platform's automation systems apply the line currents and voltages to form the reference signal. It is known that filter-compensating devices are the most efficient means to increase the quality of electric energy in the autonomous power supply systems at the moment. Their efficiency in higher harmonic suppression and compensation of their volt-ampere reactive may be provided only with the high accuracy of the calculation of parameters in the target harmonics of the line currents and voltages. And as harmonic composition periodically varies depending on the regime of operation and the composition of load of the electric power station, the settings of filtering devices should be changed constantly, that can be done by means of identification and on-line monitoring processes. The authors have proposed a candidate solution for such a problem through the example of identification and synthesis of the system of measuring system performance indicators required to appraise the electric power quality in this system and, as consequence, performance quality.
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 435-437
The effect of dredger positioning accuracy on the environment
Using modern GNSS technologies and Geographic information systems provides accuracy and improving the efficiency of dredging. As result it effect on volume of soil that will be removed from bottom and as consequence decreasing of slurry.
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 435-437
The effect of dredger positioning accuracy on the environment
Using modern GNSS technologies and Geographic information systems provides accuracy and improving the efficiency of dredging. As result it effect on volume of soil that will be removed from bottom and as consequence decreasing of slurry.
- Open Access
- 14 September 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 91 (1) , 012064
Using information technologies in dredging
The article deals with various aspects of using information technologies in dredging. The possibilities of modern information technology in the framework of improving the efficiency of dredging.
- 14 September 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 91 (1) , 012064
Open AccessUsing information technologies in dredging
The article deals with various aspects of using information technologies in dredging. The possibilities of modern information technology in the framework of improving the efficiency of dredging.