Kenji Nakamura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kenji Nakamura has a total of 136 co-authors. Here are the top co-authors by number of shared publications:
Osamu Ichinokura
Graduate School of Engineering, Tohoku University
55 shared publicationsO. Ichinokura
Graduate School of Engineering, Tohoku University, Sendai, Japan
21 shared publicationsKenji Arimatsu
Tohoku Electric Power Co., Inc., Sendai 980-8550, Japan
7 shared publicationsMichinari Fukuoka
DENSO CORPORATION
7 shared publicationsTakashi Ohinata
Tohoku Electric Power Co., Inc., Sendai 980-8550, Japan
7 shared publicationsYu Hasegawa
6 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8203205
A Comparative Study of Flux Reversal Motors With Different Permanent Magnet Arrangements
A flux reversal motor (FRM) is a type of doubly salient permanent magnet synchronous machine. Owing to the rotor composed entirely of a laminated core, the FRM offers superior mechanical robustness compared to conventional surface permanent magnet (SPM) motors. Therefore, FRMs have attracted attention in recent years. This paper presents a comparative investigation of two permanent magnet (PM) arrangements in an FRM. The first is the conventional NSSN sequence reported in previous studies, while the second is a newly proposed NSNS sequence. The flux flows in the motor of both configurations are systematically analyzed. Specifically, the flux flows created by the PMs and armature current are clarified based on magnetic equivalent circuit theory, and the differences in flux density distributions resulting from their superposition are examined. It is shown that these differences lead to distinct magnetic saturation characteristics under high current density conditions. Furthermore, the influence of the different flux waveforms on iron loss is evaluated. The results demonstrate that the proposed NSNS array achieves improved torque performance in the high current density region by mitigating magnetic saturation through a unique flux cancellation mechanism. Moreover, it is revealed that the proposed NSNS array reduces total iron loss and enhances efficiency, as the reduction in flux density amplitude outweighs the impact of the increased spatial frequency. These findings provide design insights into the selection of magnet arrangements for high-performance FRMs.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8203205
A Comparative Study of Flux Reversal Motors With Different Permanent Magnet Arrangements
A flux reversal motor (FRM) is a type of doubly salient permanent magnet synchronous machine. Owing to the rotor composed entirely of a laminated core, the FRM offers superior mechanical robustness compared to conventional surface permanent magnet (SPM) motors. Therefore, FRMs have attracted attention in recent years. This paper presents a comparative investigation of two permanent magnet (PM) arrangements in an FRM. The first is the conventional NSSN sequence reported in previous studies, while the second is a newly proposed NSNS sequence. The flux flows in the motor of both configurations are systematically analyzed. Specifically, the flux flows created by the PMs and armature current are clarified based on magnetic equivalent circuit theory, and the differences in flux density distributions resulting from their superposition are examined. It is shown that these differences lead to distinct magnetic saturation characteristics under high current density conditions. Furthermore, the influence of the different flux waveforms on iron loss is evaluated. The results demonstrate that the proposed NSNS array achieves improved torque performance in the high current density region by mitigating magnetic saturation through a unique flux cancellation mechanism. Moreover, it is revealed that the proposed NSNS array reduces total iron loss and enhances efficiency, as the reduction in flux density amplitude outweighs the impact of the increased spatial frequency. These findings provide design insights into the selection of magnet arrangements for high-performance FRMs.
- 2 September 2025
- Published by Springer Nature
- p. 647-661
Motor Analysis by Magnetic Circuit
- Open Access
Measuring the Operating Condition of Induction Motor Using High-Sensitivity Magnetic Sensor
This study aimed to monitor the operating state of an induction motor, a type of electromagnetic motor, using a highly sensitive magnetic sensor, which could be applied for anomaly detection in the future. Monitoring the health of electromagnetic motors is very important to minimize losses due to failures. Detecting anomalies using the changes compared with the initial state is a possible solution, but there are issues such as a lack of training data for machine learning and the need to install multiple sensors. Therefore, an attempt was made to acquire the various operating states of a motor from magnetic signals using a single magnetic sensor capable of non-contact measurement. The relationships between the magnetic flux density from the motor and the other motor conditions were investigated. As a result, the magnetic spectrum was found to contain information on the rotor rotation frequency, torque, and output power. Therefore, the magnetic sensor can be applied to monitor a motor’s operating conditions, making it a useful tool for advanced data analysis.
Open AccessMeasuring the Operating Condition of Induction Motor Using High-Sensitivity Magnetic Sensor
This study aimed to monitor the operating state of an induction motor, a type of electromagnetic motor, using a highly sensitive magnetic sensor, which could be applied for anomaly detection in the future. Monitoring the health of electromagnetic motors is very important to minimize losses due to failures. Detecting anomalies using the changes compared with the initial state is a possible solution, but there are issues such as a lack of training data for machine learning and the need to install multiple sensors. Therefore, an attempt was made to acquire the various operating states of a motor from magnetic signals using a single magnetic sensor capable of non-contact measurement. The relationships between the magnetic flux density from the motor and the other motor conditions were investigated. As a result, the magnetic spectrum was found to contain information on the rotor rotation frequency, torque, and output power. Therefore, the magnetic sensor can be applied to monitor a motor’s operating conditions, making it a useful tool for advanced data analysis.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Experimental Improvement of Speed–Torque Characteristics in Magnetic-Geared Switched Reluctance Motor
In-wheel direct drive motor systems for electric vehicles (EVs) have garnered significant attention because they integrate traction motors directly within the driving wheels, eliminating the need for transmission elements and resulting in a compact design and ease of maintenance. Among novel in-wheel motor designs, a magnetic-geared switched reluctance motor (MG-SRM), which combines a switched reluctance (SR) motor and a flux-modulated-type magnetic gear (MG), is notable for achieving the wide speed–torque characteristics required for EVs. However, the torque of the MG-SRM in high-speed regions has been relatively small. Therefore, this article focuses on improving the torque by advancing the excitation start angle of the SR motor. Experimental results demonstrate that speed–torque characteristics improve, especially in medium-speed regions. When applying the proposed method, the current density-torque characteristics decrease. Nevertheless, when focusing on the same torque, the efficiency remains unaffected because the output power increases. Moreover, when focusing on the same rotational speed, the efficiency improves as the torque increases.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Experimental Improvement of Speed–Torque Characteristics in Magnetic-Geared Switched Reluctance Motor
In-wheel direct drive motor systems for electric vehicles (EVs) have garnered significant attention because they integrate traction motors directly within the driving wheels, eliminating the need for transmission elements and resulting in a compact design and ease of maintenance. Among novel in-wheel motor designs, a magnetic-geared switched reluctance motor (MG-SRM), which combines a switched reluctance (SR) motor and a flux-modulated-type magnetic gear (MG), is notable for achieving the wide speed–torque characteristics required for EVs. However, the torque of the MG-SRM in high-speed regions has been relatively small. Therefore, this article focuses on improving the torque by advancing the excitation start angle of the SR motor. Experimental results demonstrate that speed–torque characteristics improve, especially in medium-speed regions. When applying the proposed method, the current density-torque characteristics decrease. Nevertheless, when focusing on the same torque, the efficiency remains unaffected because the output power increases. Moreover, when focusing on the same rotational speed, the efficiency improves as the torque increases.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Eddy Current Loss Reduction in Flux-Modulated-Type Magnetic Gears by Unequal Division of Magnets
The development of high-speed motors is progressing to increase the power-to-weight ratio. Additionally, gearboxes combined with high-speed motors are required to enhance their capability for high-speed operation. Flux-modulated-type magnetic gears are suitable for such high-speed applications because of their nonmechanical contact and high torque density. However, eddy current loss in magnets must be addressed under high-speed operation. This article discusses the effect of magnet division on reducing eddy current loss in magnets of flux-modulated-type magnetic gears using finite element method (FEM) and the prototype magnetic gears. It is demonstrated that the circumferential division is more effective than the axial division in suppressing eddy current loss. In addition, a significant bias of eddy current losses within the same magnet in flux-modulated magnetic gears is observed, and the unequal division of magnets can suppress eddy current losses more effectively than the conventional equal division.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Eddy Current Loss Reduction in Flux-Modulated-Type Magnetic Gears by Unequal Division of Magnets
The development of high-speed motors is progressing to increase the power-to-weight ratio. Additionally, gearboxes combined with high-speed motors are required to enhance their capability for high-speed operation. Flux-modulated-type magnetic gears are suitable for such high-speed applications because of their nonmechanical contact and high torque density. However, eddy current loss in magnets must be addressed under high-speed operation. This article discusses the effect of magnet division on reducing eddy current loss in magnets of flux-modulated-type magnetic gears using finite element method (FEM) and the prototype magnetic gears. It is demonstrated that the circumferential division is more effective than the axial division in suppressing eddy current loss. In addition, a significant bias of eddy current losses within the same magnet in flux-modulated magnetic gears is observed, and the unequal division of magnets can suppress eddy current losses more effectively than the conventional equal division.
- 18 December 2024
- Published by Springer Nature
- p. 1-15
Motor Analysis by Magnetic Circuit
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-5
Prototype Verification of Flux Reversal Motor With Cross-Pole Shape Stator
A flux reversal motor (FRM) is one of the doubly salient permanent magnet (PM) motors. It has an advantage in torque density and a straightforward structure. Thus, the FRM has attracted the attention of both researchers and developers in recent years. First, this article demonstrates an optimized-designed proposed high-performance FRM with a cross-pole shape stator. Compared with the conventional flux reversal machine, the proposed FRM used less PMs to prevent magnetic saturation and enhance torque density. Also, the optimized-designed cross-pole shape FRM can tremendously reduce eddy current losses in PMs and increase motor efficiency. This article provides a detailed analysis of the finite element method (FEM) and the prototype test results of the proposed FRM, which is proven the usability of cross-pole shape FRM.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-5
Prototype Verification of Flux Reversal Motor With Cross-Pole Shape Stator
A flux reversal motor (FRM) is one of the doubly salient permanent magnet (PM) motors. It has an advantage in torque density and a straightforward structure. Thus, the FRM has attracted the attention of both researchers and developers in recent years. First, this article demonstrates an optimized-designed proposed high-performance FRM with a cross-pole shape stator. Compared with the conventional flux reversal machine, the proposed FRM used less PMs to prevent magnetic saturation and enhance torque density. Also, the optimized-designed cross-pole shape FRM can tremendously reduce eddy current losses in PMs and increase motor efficiency. This article provides a detailed analysis of the finite element method (FEM) and the prototype test results of the proposed FRM, which is proven the usability of cross-pole shape FRM.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-6
Reluctance Network Model of V-Type IPMSM for Accurate and Practical Design
This paper proposes a reluctance network analysis (RNA) model of a V-type interior permanent magnet synchronous motor (IPMSM) for accurate and practical design. As a result of the examination, it was demonstrated that the proposed RNA model could accurately calculate the basic characteristics of a V-type IPMSM by comparing its calculation results with those of a finite element method (FEM).
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-6
Reluctance Network Model of V-Type IPMSM for Accurate and Practical Design
This paper proposes a reluctance network analysis (RNA) model of a V-type interior permanent magnet synchronous motor (IPMSM) for accurate and practical design. As a result of the examination, it was demonstrated that the proposed RNA model could accurately calculate the basic characteristics of a V-type IPMSM by comparing its calculation results with those of a finite element method (FEM).
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 131-135
Magnetic Interaction Effect on Stall Torque of IPM-type Magnetic-Geared Generator
Magnetic-geared generators (MGGs) are expected to be applied to wind-power generation because of maintenance-free, high torque density and efficiency. Among them, an interior permanent magnet (IPM)-type MGG has superior characteristics compared with a surface permanent magnet (SPM)-type MGG. The stall torque of the IPM-type changes with the current phase angle because of magnetic interaction, while the SPM-type keeps constant. This paper investigates the effect of magnetic interaction on the stall torque of IPM-type MMG using both a three-dimensional finite element method (3D-FEM) and experiments. In addition, since the stall torque can be improved by magnetic interaction, a novel high-speed rotor structure is proposed to maximize the effects of magnetic interaction to achieve the same stall torque while using fewer permanent magnets. The validity of the proposed new high-speed rotor structure is proved by using 3D-FEM.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 131-135
Magnetic Interaction Effect on Stall Torque of IPM-type Magnetic-Geared Generator
Magnetic-geared generators (MGGs) are expected to be applied to wind-power generation because of maintenance-free, high torque density and efficiency. Among them, an interior permanent magnet (IPM)-type MGG has superior characteristics compared with a surface permanent magnet (SPM)-type MGG. The stall torque of the IPM-type changes with the current phase angle because of magnetic interaction, while the SPM-type keeps constant. This paper investigates the effect of magnetic interaction on the stall torque of IPM-type MMG using both a three-dimensional finite element method (3D-FEM) and experiments. In addition, since the stall torque can be improved by magnetic interaction, a novel high-speed rotor structure is proposed to maximize the effects of magnetic interaction to achieve the same stall torque while using fewer permanent magnets. The validity of the proposed new high-speed rotor structure is proved by using 3D-FEM.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Investigation of Multipole Transverse-Flux-type Switched Reluctance Motor
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper focuses on transverse-flux-type SRMs (TFSRMs), which have larger torque than conventional radial-flux-type SRMs (RFSRMs). This paper discusses a relationship between the number of poles and torque using a simple magnetic circuit.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Investigation of Multipole Transverse-Flux-type Switched Reluctance Motor
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper focuses on transverse-flux-type SRMs (TFSRMs), which have larger torque than conventional radial-flux-type SRMs (RFSRMs). This paper discusses a relationship between the number of poles and torque using a simple magnetic circuit.