Sang Kyung Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sang Kyung Lee has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
- Byoung Hun Lee
Department of Electrical Engineering, Center for Semiconductor Technology Convergence, Pohang University of Science and Technology, Pohang, Republic of Korea
20 shared publications Chunhum Cho
Department of Nanobio Materials and Electronics, Gwangju Institute of Science and Technology, 261 Cheomdan-gwagiro, (Oryong-dong), Buk-gu, Gwangju 500-712, KOREA, Gwangju, KOREA, REPUBLIC OF
13 shared publicationsChang Goo Kang
Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 29 Geumgu-gil, Jeongeup-Si, Jeollabuk-Do 56212, South Korea
11 shared publicationsYoung Gon Lee
11 shared publicationsHyeon Jun Hwang
School of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju, KOREA, REPUBLIC OF
10 shared publicationsByoung Hun Lee
9 shared publications
Latest Publications
- Open Access
- 4 May 2021
- Published by Wiley in Thoracic Cancer
- Vol. 12 (11) , 1721-1725
Video‐assisted thoracoscopic surgical wedge resection using multiplanar computed tomography reconstruction‐fluoroscopy after CT guided microcoil localization
Background: When early‐stage lung cancer is diagnosed, the recommended treatment is anatomical resection using video‐assisted thoracoscopic surgery (VATS) or robotic lobectomy. However, nonanatomical resection, known as wedge resection (WR), which is performed to diagnose pulmonary nodules, can be problematic for clinicians performing VATS or robotic‐assisted thoracic surgery (RATS). The purpose of this study was to evaluate the safety and effectiveness of VATS WR using multiplanar computed tomography reconstruction (CT MPR)‐fluoroscopy after CT guided microcoil localization to achieve complete pulmonary nodule resection.Methods: Between January 2016 to December 2020, the medical records of patients who underwent CT‐guided microcoil localization for suspicious malignant pulmonary nodules and VATS WR with CT MPR and intraoperative fluoroscopy were retrospectively reviewed.Results: All 130 patients successfully underwent CT‐guided localization. The success rate of VATS WR with CT MPR‐intraoperative fluoroscopy was 98.5%. Mean operation time was 58 min (range 50–84 min). The postoperative complication rate was 3.1%, and no major postoperative complications were reported. The mean postoperative length of hospital stay was 4.7 days (range 4–8 days).Conclusions: VATS WR using CT MPR‐fluoroscopy after CT guided microcoil localization is a safe and highly effective approach for complete pulmonary nodule resection. However, even in uniport VATS or recently performed robotic surgery, localization and resection of nonvisible, nonpalpable pulmonary nodules is a challenging problem. Consequently, satisfactory outcomes can be expected if this technique is used for suspicious malignant pulmonary nodule resection.
- 4 May 2021
- Published by Wiley in Thoracic Cancer
- Vol. 12 (11) , 1721-1725
Open AccessVideo‐assisted thoracoscopic surgical wedge resection using multiplanar computed tomography reconstruction‐fluoroscopy after CT guided microcoil localization
Background: When early‐stage lung cancer is diagnosed, the recommended treatment is anatomical resection using video‐assisted thoracoscopic surgery (VATS) or robotic lobectomy. However, nonanatomical resection, known as wedge resection (WR), which is performed to diagnose pulmonary nodules, can be problematic for clinicians performing VATS or robotic‐assisted thoracic surgery (RATS). The purpose of this study was to evaluate the safety and effectiveness of VATS WR using multiplanar computed tomography reconstruction (CT MPR)‐fluoroscopy after CT guided microcoil localization to achieve complete pulmonary nodule resection.Methods: Between January 2016 to December 2020, the medical records of patients who underwent CT‐guided microcoil localization for suspicious malignant pulmonary nodules and VATS WR with CT MPR and intraoperative fluoroscopy were retrospectively reviewed.Results: All 130 patients successfully underwent CT‐guided localization. The success rate of VATS WR with CT MPR‐intraoperative fluoroscopy was 98.5%. Mean operation time was 58 min (range 50–84 min). The postoperative complication rate was 3.1%, and no major postoperative complications were reported. The mean postoperative length of hospital stay was 4.7 days (range 4–8 days).Conclusions: VATS WR using CT MPR‐fluoroscopy after CT guided microcoil localization is a safe and highly effective approach for complete pulmonary nodule resection. However, even in uniport VATS or recently performed robotic surgery, localization and resection of nonvisible, nonpalpable pulmonary nodules is a challenging problem. Consequently, satisfactory outcomes can be expected if this technique is used for suspicious malignant pulmonary nodule resection.
- Open Access
- 24 October 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (11) , 2116
Charging Effect by Fluorine-Treatment and Recess Gate for Enhancement-Mode on AlGaN/GaN High Electron Mobility Transistors
An enhancement-mode AlGaN/GaN metal-insulator-semiconductor high-electron- mobility-transistor was fabricated using a recess gate and CF4 plasma treatment to investigate its reliable applicability to high-power devices and circuits. The fluorinated-gate device showed hysteresis during the DC current-voltage measurement, and the polarity and magnitude of hysteresis depend on the drain voltage. The hysteresis phenomenon is due to the electron trapping at the Al2O3/AlGaN interface and charging times longer than milliseconds were obtained by pulse I-V measurement. In addition, the subthreshold slope of the fluorinated-gate device was increased after the positive gate bias stress because of the two-dimensional electron gas reduction by ionized fluorine. Our systematic observation revealed that the effect of fluorine ions should be considered for the design of AlGaN/GaN power circuits.
- 24 October 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (11) , 2116
Open AccessCharging Effect by Fluorine-Treatment and Recess Gate for Enhancement-Mode on AlGaN/GaN High Electron Mobility Transistors
An enhancement-mode AlGaN/GaN metal-insulator-semiconductor high-electron- mobility-transistor was fabricated using a recess gate and CF4 plasma treatment to investigate its reliable applicability to high-power devices and circuits. The fluorinated-gate device showed hysteresis during the DC current-voltage measurement, and the polarity and magnitude of hysteresis depend on the drain voltage. The hysteresis phenomenon is due to the electron trapping at the Al2O3/AlGaN interface and charging times longer than milliseconds were obtained by pulse I-V measurement. In addition, the subthreshold slope of the fluorinated-gate device was increased after the positive gate bias stress because of the two-dimensional electron gas reduction by ionized fluorine. Our systematic observation revealed that the effect of fluorine ions should be considered for the design of AlGaN/GaN power circuits.
- Open Access
- 18 June 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (6) , 1186
Channel Defect Profiling and Passivation for ZnO Thin-Film Transistors
The electrical characteristics of Zinc oxide (ZnO) thin-film transistors are analyzed to apprehend the effects of oxygen vacancies after vacuum treatment. The energy level of the oxygen vacancies was found to be located near the conduction band of ZnO, which contributed to the increase in drain current (ID) via trap-assisted tunneling when the gate voltage (VG) is lower than the specific voltage associated with the trap level. The oxygen vacancies were successfully passivated after the annealing of ZnO in oxygen ambient. We determined that the trap-induced Schottky barrier lowering reduced a drain barrier when the drain was subjected to negative bias stress. Consequentially, the field effect mobility increased from 8.5 m2 V−1·s−1 to 8.9 m2 V−1·s−1 and on-current increased by ~13%.
- 18 June 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (6) , 1186
Open AccessChannel Defect Profiling and Passivation for ZnO Thin-Film Transistors
The electrical characteristics of Zinc oxide (ZnO) thin-film transistors are analyzed to apprehend the effects of oxygen vacancies after vacuum treatment. The energy level of the oxygen vacancies was found to be located near the conduction band of ZnO, which contributed to the increase in drain current (ID) via trap-assisted tunneling when the gate voltage (VG) is lower than the specific voltage associated with the trap level. The oxygen vacancies were successfully passivated after the annealing of ZnO in oxygen ambient. We determined that the trap-induced Schottky barrier lowering reduced a drain barrier when the drain was subjected to negative bias stress. Consequentially, the field effect mobility increased from 8.5 m2 V−1·s−1 to 8.9 m2 V−1·s−1 and on-current increased by ~13%.
- 9 April 2019
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 34 (5) , 055010
Advantages of a buried-gate structure for graphene field-effect transistor
Graphene field effect transistors (GFETs) with top-gate and back-gate structures have been extensively used without much consideration for compatibility with graphene. A comparative study of the electrical characteristics of buried-gate GFETs and top-gate GFETs revealed that the performance of buried-gate GFETs is drastically enhanced by having a better gate controllability, achieving three times higher field effect mobility (∼3000 cm 2 V −1 s −1 ) than top-gate GFETs with on/off ratio ∼10. Carrier scattering was also substantially improved by minimizing the fringing field effect, which is found to be the origin of high series resistance in top-gate GFETs. Moreover, we showed by electromagnetic (EM) simulation that the electric field distribution inside the transistors is more uniform at the buried-gate GFETs than the top-gate GFETs.
- 9 April 2019
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 34 (5) , 055010
Advantages of a buried-gate structure for graphene field-effect transistor
Graphene field effect transistors (GFETs) with top-gate and back-gate structures have been extensively used without much consideration for compatibility with graphene. A comparative study of the electrical characteristics of buried-gate GFETs and top-gate GFETs revealed that the performance of buried-gate GFETs is drastically enhanced by having a better gate controllability, achieving three times higher field effect mobility (∼3000 cm 2 V −1 s −1 ) than top-gate GFETs with on/off ratio ∼10. Carrier scattering was also substantially improved by minimizing the fringing field effect, which is found to be the origin of high series resistance in top-gate GFETs. Moreover, we showed by electromagnetic (EM) simulation that the electric field distribution inside the transistors is more uniform at the buried-gate GFETs than the top-gate GFETs.
- Open Access
- 7 October 2018
- Published by MDPI AG in Nanomaterials
- Vol. 8 (10) , 797
Operation Mechanism of a MoS2/BP Heterojunction FET
The electrical characteristics and operation mechanism of a molybdenum disulfide/black phosphorus (MoS2/BP) heterojunction device are investigated herein. Even though this device showed a high on-off ratio of over 1 × 107, with a lower subthreshold swing of ~54 mV/dec and a 1fA level off current, its operating mechanism is closer to a junction field-effect transistor (FET) than a tunneling FET. The off-current of this device is governed by the depletion region in the BP layer, and the band-to-band tunneling current does not contribute to the rapid turn-on and extremely low off-current.
- 7 October 2018
- Published by MDPI AG in Nanomaterials
- Vol. 8 (10) , 797
Open AccessOperation Mechanism of a MoS2/BP Heterojunction FET
The electrical characteristics and operation mechanism of a molybdenum disulfide/black phosphorus (MoS2/BP) heterojunction device are investigated herein. Even though this device showed a high on-off ratio of over 1 × 107, with a lower subthreshold swing of ~54 mV/dec and a 1fA level off current, its operating mechanism is closer to a junction field-effect transistor (FET) than a tunneling FET. The off-current of this device is governed by the depletion region in the BP layer, and the band-to-band tunneling current does not contribute to the rapid turn-on and extremely low off-current.
Gate‐Controlled Graphene–Silicon Schottky Junction Photodetector
Various photodetectors showing extremely high photoresponsivity have been frequently reported, but many of these photodetectors could not avoid the simultaneous amplification of dark current. A gate‐controlled graphene–silicon Schottky junction photodetector that exhibits a high on/off photoswitching ratio (≈104), a very high photoresponsivity (≈70 A W−1), and a low dark current in the order of µA cm−2 in a wide wavelength range (395–850 nm) is demonstrated. The photoresponsivity is ≈100 times higher than that of existing commercial photodetectors, and 7000 times higher than that of graphene‐field‐effect transistor‐based photodetectors, while the dark current is similar to or lower than that of commercial photodetectors. This result can be explained by a unique gain mechanism originating from the difference in carrier transport characteristics of silicon and graphene.
Gate‐Controlled Graphene–Silicon Schottky Junction Photodetector
Various photodetectors showing extremely high photoresponsivity have been frequently reported, but many of these photodetectors could not avoid the simultaneous amplification of dark current. A gate‐controlled graphene–silicon Schottky junction photodetector that exhibits a high on/off photoswitching ratio (≈104), a very high photoresponsivity (≈70 A W−1), and a low dark current in the order of µA cm−2 in a wide wavelength range (395–850 nm) is demonstrated. The photoresponsivity is ≈100 times higher than that of existing commercial photodetectors, and 7000 times higher than that of graphene‐field‐effect transistor‐based photodetectors, while the dark current is similar to or lower than that of commercial photodetectors. This result can be explained by a unique gain mechanism originating from the difference in carrier transport characteristics of silicon and graphene.
- Open Access
- 5 June 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (32) , 325202
Contact resistance reduction of ZnO thin film transistors (TFTs) with saw-shaped electrode
We report on a saw-shaped electrode architecture ZnO thin film transistor (TFT), which effectively increases the channel width. The contact line of the saw-shaped electrode is almost twice as long at the contact metal/ZnO channel junction. We experimentally observed an enhancement in the output drive current by 50% and a reduction in the contact resistance by over 50%, when compared to a typically shaped electrode ZnO TFT consuming the same chip area. This performance enhancement is attributed to the extension of the channel width. This technique can contribute to device performance enhancement, and in particular reduce the contact resistance, which is a serious challenge.
- 5 June 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (32) , 325202
Open AccessContact resistance reduction of ZnO thin film transistors (TFTs) with saw-shaped electrode
We report on a saw-shaped electrode architecture ZnO thin film transistor (TFT), which effectively increases the channel width. The contact line of the saw-shaped electrode is almost twice as long at the contact metal/ZnO channel junction. We experimentally observed an enhancement in the output drive current by 50% and a reduction in the contact resistance by over 50%, when compared to a typically shaped electrode ZnO TFT consuming the same chip area. This performance enhancement is attributed to the extension of the channel width. This technique can contribute to device performance enhancement, and in particular reduce the contact resistance, which is a serious challenge.
- 6 March 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (4S) , 04FB02
Unique reliability characteristics of fully depleted silicon-on-insulator tunneling FET
This study investigated the unique reliability characteristics of tunneling field effect transistors (TFETs) by comparing the effects of positive bias temperature instability (PBTI) and hot carrier injection (HCI) stresses. In case of hot carrier injection (HCI) stress, the interface trap generation near a p/n + region was the primary degradation mechanism. However, strong recovery after a high-pressure hydrogen annealing and weak degradation at low temperature indicates that the degradation mechanism of TFET under the HCI stress is different from the high-energy carrier stress induced permanent defect generation mechanism observed in MOSFETs. Further study is necessary to identify the exact location and defect species causing TFET degradation; however, a significant difference is evident between the dominant reliability mechanism of TFET and MOSFET.
- 6 March 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (4S) , 04FB02
Unique reliability characteristics of fully depleted silicon-on-insulator tunneling FET
This study investigated the unique reliability characteristics of tunneling field effect transistors (TFETs) by comparing the effects of positive bias temperature instability (PBTI) and hot carrier injection (HCI) stresses. In case of hot carrier injection (HCI) stress, the interface trap generation near a p/n + region was the primary degradation mechanism. However, strong recovery after a high-pressure hydrogen annealing and weak degradation at low temperature indicates that the degradation mechanism of TFET under the HCI stress is different from the high-energy carrier stress induced permanent defect generation mechanism observed in MOSFETs. Further study is necessary to identify the exact location and defect species causing TFET degradation; however, a significant difference is evident between the dominant reliability mechanism of TFET and MOSFET.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. P-RT.5-1-RT.5
Reliability characteristics of MIM capacitor studied with ΔC-F characteristics
We propose a simple method to monitor the quality of MIM capacitor. The differences in the slope of C-F curve at low and high frequency are found to be a good indicator showing the difference in the reliability characteristics of MIM capacitor. Asymmetric interface trap generation near top or bottom electrode could be monitored and clear difference was observed at various dielectric thickness, measurement temperature and stack structures.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. P-RT.5-1-RT.5
Reliability characteristics of MIM capacitor studied with ΔC-F characteristics
We propose a simple method to monitor the quality of MIM capacitor. The differences in the slope of C-F curve at low and high frequency are found to be a good indicator showing the difference in the reliability characteristics of MIM capacitor. Asymmetric interface trap generation near top or bottom electrode could be monitored and clear difference was observed at various dielectric thickness, measurement temperature and stack structures.
- 6 December 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (2) , 365-370
Zero-Bias Operation of CVD Graphene Photodetector with Asymmetric Metal Contacts
- 6 December 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (2) , 365-370
Zero-Bias Operation of CVD Graphene Photodetector with Asymmetric Metal Contacts