José Manuel Otero-Mato
Research Subjects
José Manuel Otero-Mato has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Hadrián Montes-Campos
University of Santiago de Compostela, Santiago de Compostela, Spain, Grupo de Nanomateriais, Fotónica e Materia Branda, Departamento de Física de Partículas
10 shared publications - Luis Miguel Varela
Grupo de Nanomateriais, Fotónica e Materia Branda, Departamento de Física de Partículas, Universidade de Santiago de Compostela, Campus Vida s/n, Santiago de Compostela E-15782, Spain
8 shared publications Luis J. Gallego
6 shared publications- Oscar Cabeza
MESTURAS Group, Departamento de Física y Ciencias de la Tierra, Universidade da Coruña, 15071 A Coruña, Spain
4 shared publications Oscar Cabeza
3 shared publications- Alejandro Rivera-Pousa
Grupo de Nanomateriais, Fotónica e Materia Branda, Departamento de Física de Partículas, Universidade de Santiago de Compostela, Campus Vida s/n, E-15782 Santiago de Compostela, Spain
2 shared publications
Latest Publications
- Open Access
- 29 April 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (9) , 3921-3936
Ternary Solid Polymer Electrolytes at the Electrochemical Interface: A Computational Study
Polymer-based solid-like gel electrolytes have emerged as a promising alternative to improve battery performance. However, there is a scarcity of studies on the behavior of these media at the electrochemical interface. In this work, we report classical MD simulations of ternary polymer electrolytes composed of poly(ethylene oxide), a lithium salt [lithium bis(trifluoromethanesulfonyl)imide], and different ionic liquids [1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide] confined between two charged and uncharged graphene-like surfaces. The molecular solvation of Li+ ions and their diffusion as well as the polymer conformational picture were characterized in terms of the radial distribution functions, coordination numbers, number density profiles, orientations, displacement variance, polymer radius of gyration, and polymer end-to-end distance. Our results show that the layering behavior of the ternary electrolyte in the interfacial region leads to a decrease of Li+ mobility in the direction perpendicular to the electrodes and high energy barriers that hinder lithium cations from coming into direct contact with the graphene-like surface. The nature of the ionic liquid and its concentration were found to influence the structural and dynamic properties at the electrode/electrolyte interface, the electrolyte with low amounts of the pyrrolidinium-based ionic liquid being that with the best performance since it favors the migration of Li+ cations toward the negative electrode when compared to the imidazolium-based one.
- 29 April 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (9) , 3921-3936
Open AccessTernary Solid Polymer Electrolytes at the Electrochemical Interface: A Computational Study
Polymer-based solid-like gel electrolytes have emerged as a promising alternative to improve battery performance. However, there is a scarcity of studies on the behavior of these media at the electrochemical interface. In this work, we report classical MD simulations of ternary polymer electrolytes composed of poly(ethylene oxide), a lithium salt [lithium bis(trifluoromethanesulfonyl)imide], and different ionic liquids [1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide] confined between two charged and uncharged graphene-like surfaces. The molecular solvation of Li+ ions and their diffusion as well as the polymer conformational picture were characterized in terms of the radial distribution functions, coordination numbers, number density profiles, orientations, displacement variance, polymer radius of gyration, and polymer end-to-end distance. Our results show that the layering behavior of the ternary electrolyte in the interfacial region leads to a decrease of Li+ mobility in the direction perpendicular to the electrodes and high energy barriers that hinder lithium cations from coming into direct contact with the graphene-like surface. The nature of the ionic liquid and its concentration were found to influence the structural and dynamic properties at the electrode/electrolyte interface, the electrolyte with low amounts of the pyrrolidinium-based ionic liquid being that with the best performance since it favors the migration of Li+ cations toward the negative electrode when compared to the imidazolium-based one.
- Open Access
- 3 November 2023
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 392, 123460
Ionic liquid/metal salt mixtures at the graphene interface: A density functional theory approach
- 3 November 2023
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 392, 123460
Open AccessIonic liquid/metal salt mixtures at the graphene interface: A density functional theory approach
- 1 April 2020
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 303
Borophene vs. graphene interfaces: Tuning the electric double layer in ionic liquids
- 1 April 2020
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 303
Borophene vs. graphene interfaces: Tuning the electric double layer in ionic liquids
- 1 October 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 292
Solvation in ionic liquid-water mixtures: A computational study
- 1 October 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 292
Solvation in ionic liquid-water mixtures: A computational study
- 1 September 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 289
Mixtures of lithium salts and ionic liquids at defected graphene walls
- 1 September 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 289
Mixtures of lithium salts and ionic liquids at defected graphene walls
- 30 November 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (48) , 30412-30427
3D structure of the electric double layer of ionic liquid–alcohol mixtures at the electrochemical interface
We report the first MD simulations of the 3D structure of the electric double layer of ionic liquid–alcohol mixtures.
- 30 November 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (48) , 30412-30427
3D structure of the electric double layer of ionic liquid–alcohol mixtures at the electrochemical interface
We report the first MD simulations of the 3D structure of the electric double layer of ionic liquid–alcohol mixtures.
- 26 April 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (18) , 12767-12776
Molecular dynamics simulations of the structure of mixtures of protic ionic liquids and monovalent and divalent salts at the electrochemical interface
We perform molecular dynamics simulations of mixtures of a prototypical protic ionic liquid, ethylammonium nitrate, with lithium or magnesium nitrate (LiNO3/Mg(NO3)2) confined between two graphene walls. The structure of the system is analyzed by means of ionic density profiles, angular orientations of ethylammonium cations close to the wall and the lateral structure of the first layer close to the graphene wall. All these results are compared to those of the corresponding aprotic ionic liquid systems, analyzing the influence of the graphene wall charge in the structure of the protic and aprotic mixtures. Moreover, vibrational densities of states are calculated for the salt cations close to the walls. Finally, we investigate the structure of the mixture with Li salt near the interface using ab initio density functional theory, and the results are compared with those obtained by classical molecular dynamics simulations.
- 26 April 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (18) , 12767-12776
Molecular dynamics simulations of the structure of mixtures of protic ionic liquids and monovalent and divalent salts at the electrochemical interface
We perform molecular dynamics simulations of mixtures of a prototypical protic ionic liquid, ethylammonium nitrate, with lithium or magnesium nitrate (LiNO3/Mg(NO3)2) confined between two graphene walls. The structure of the system is analyzed by means of ionic density profiles, angular orientations of ethylammonium cations close to the wall and the lateral structure of the first layer close to the graphene wall. All these results are compared to those of the corresponding aprotic ionic liquid systems, analyzing the influence of the graphene wall charge in the structure of the protic and aprotic mixtures. Moreover, vibrational densities of states are calculated for the salt cations close to the walls. Finally, we investigate the structure of the mixture with Li salt near the interface using ab initio density functional theory, and the results are compared with those obtained by classical molecular dynamics simulations.
- 9 January 2018
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 14 (2) , 466-478
GADDLE Maps: General Algorithm for Discrete Object Deformations Based on Local Exchange Maps
A new method for switching between structures consisting of equivalent discrete and flexible objects with different particle representation and object configuration, including different resolution levels (number of particles per object), is reported. The method is fully general since it does not require any extra code nor additional database elements for new systems. It is based on a Monte Carlo sampling of the configurational space for each object type of the target system, which is controlled by a Metropolis acceptance criterion of movements (translations, rotations and relative deformations of the object configuration) based on the generalized distance between the sets of particles at both representations. For Gaussian distributed distances, such minimization procedure is equivalent to an optimization of Χ2 in a maximum likelihood method. This provides sound statistical support since the method leads to the statistically most probable configuration of the system at each representation. The configurations obtained in this way are then used to create resolution exchange maps for each object type, which allows the extrapolation of the conversion to every object configuration throughout the whole system. As an example, the method is here tested with several molecular dynamics simulated systems (ionic liquids, cyclodextrins, cell-penetrating peptides, cyclic peptides, lipid bilayers, vesicles, heterogeneous organic molecules, DNA and solvated proteins) for different resolution forcefields (GROMOS, AMBER, OPLS, MARTINI) using Gromacs. In this context, the method can be applied to map structures described by any other pair of force fields, as well as to homogeneous and heterogeneous systems with many different molecules. The method is proved to be highly eficient since the time required for the mapping is practically independent of the number of molecules in the target system.
- 9 January 2018
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 14 (2) , 466-478
GADDLE Maps: General Algorithm for Discrete Object Deformations Based on Local Exchange Maps
A new method for switching between structures consisting of equivalent discrete and flexible objects with different particle representation and object configuration, including different resolution levels (number of particles per object), is reported. The method is fully general since it does not require any extra code nor additional database elements for new systems. It is based on a Monte Carlo sampling of the configurational space for each object type of the target system, which is controlled by a Metropolis acceptance criterion of movements (translations, rotations and relative deformations of the object configuration) based on the generalized distance between the sets of particles at both representations. For Gaussian distributed distances, such minimization procedure is equivalent to an optimization of Χ2 in a maximum likelihood method. This provides sound statistical support since the method leads to the statistically most probable configuration of the system at each representation. The configurations obtained in this way are then used to create resolution exchange maps for each object type, which allows the extrapolation of the conversion to every object configuration throughout the whole system. As an example, the method is here tested with several molecular dynamics simulated systems (ionic liquids, cyclodextrins, cell-penetrating peptides, cyclic peptides, lipid bilayers, vesicles, heterogeneous organic molecules, DNA and solvated proteins) for different resolution forcefields (GROMOS, AMBER, OPLS, MARTINI) using Gromacs. In this context, the method can be applied to map structures described by any other pair of force fields, as well as to homogeneous and heterogeneous systems with many different molecules. The method is proved to be highly eficient since the time required for the mapping is practically independent of the number of molecules in the target system.
- 11 September 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (36) , 24505-24512
Two-dimensional pattern formation in ionic liquids confined between graphene walls
We perform molecular dynamics and Monte Carlo simulations of ionic liquids confined between graphene walls under a large variety of conditions, proving the occurrence of structural pattern transitions that can be explained using the Landau–Brazovskii theory.
- 11 September 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (36) , 24505-24512
Two-dimensional pattern formation in ionic liquids confined between graphene walls
We perform molecular dynamics and Monte Carlo simulations of ionic liquids confined between graphene walls under a large variety of conditions, proving the occurrence of structural pattern transitions that can be explained using the Landau–Brazovskii theory.
- 28 March 2017
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 146 (12) , 124503
Nanostructured solvation in mixtures of protic ionic liquids and long-chained alcohols
The structural and dynamical properties of bulk mixtures of long-chained primary and secondary alcohols (propanol, butanol, and 2-pentanol) with protic ionic liquids (ethylammonium and butylammonium nitrate) were studied by means of molecular dynamics simulations and small angle X-ray scattering (SAXS). Changes in the structure with the alcohol concentration and with the alkyl chain length of the alcohol moieties were found, showing variations in the radial distribution function and in the number of hydrogen bonds in the bulk liquids. Moreover, the structural behaviour of the studied mixtures is further clarified with the spatial distribution functions. The global picture in the local scale is in good agreement with the nanostructured solvation paradigm [T. Méndez-Morales et al. Phys. Chem. B 118, 761 (2014)], according to which alcohols are accommodated into the hydrogen bonds’ network of the ionic liquid instead of forming clusters in the bulk. Indeed, our study reveals that the alcohol molecules are placed with their polar heads at the interfaces between polar and nonpolar nanodomains in the ionic liquid, with their alkyl chains inside the nonpolar organic nanodomains. The influence of alcohol chain length in the single-particle dynamics of the mixtures is also reported calculating the velocity autocorrelation function and vibrational densities of states of the different species in the ionic liquid-alcohol mixtures, and a weak caging effect for the ethylammonium cations independent of the chain size of the alcohols was found. However, the SAXS data collected for the studied mixtures show an excess of the scattering intensities which indicates that there are also some structural heterogeneities at the nanoscale.
- 28 March 2017
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 146 (12) , 124503
Nanostructured solvation in mixtures of protic ionic liquids and long-chained alcohols
The structural and dynamical properties of bulk mixtures of long-chained primary and secondary alcohols (propanol, butanol, and 2-pentanol) with protic ionic liquids (ethylammonium and butylammonium nitrate) were studied by means of molecular dynamics simulations and small angle X-ray scattering (SAXS). Changes in the structure with the alcohol concentration and with the alkyl chain length of the alcohol moieties were found, showing variations in the radial distribution function and in the number of hydrogen bonds in the bulk liquids. Moreover, the structural behaviour of the studied mixtures is further clarified with the spatial distribution functions. The global picture in the local scale is in good agreement with the nanostructured solvation paradigm [T. Méndez-Morales et al. Phys. Chem. B 118, 761 (2014)], according to which alcohols are accommodated into the hydrogen bonds’ network of the ionic liquid instead of forming clusters in the bulk. Indeed, our study reveals that the alcohol molecules are placed with their polar heads at the interfaces between polar and nonpolar nanodomains in the ionic liquid, with their alkyl chains inside the nonpolar organic nanodomains. The influence of alcohol chain length in the single-particle dynamics of the mixtures is also reported calculating the velocity autocorrelation function and vibrational densities of states of the different species in the ionic liquid-alcohol mixtures, and a weak caging effect for the ethylammonium cations independent of the chain size of the alcohols was found. However, the SAXS data collected for the studied mixtures show an excess of the scattering intensities which indicates that there are also some structural heterogeneities at the nanoscale.