Manas Mahapatra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Manas Mahapatra has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Nayan Ranjan Singha
Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India
27 shared publications - Mrinmoy Karmakar
Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post-Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake, Kolkata 700106, West Bengal, India
16 shared publications - Pijush Kanti Chattopadhyay
Department of Leather Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India
15 shared publications Arnab Dutta
Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India
13 shared publicationsPijush Kanti Chattopadhyay
Department of Leather Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India
9 shared publications- Arnab Dutta
Sustainable Polymers Research Lab (SPRL), GCM, The Creative School, Toronto Metropolitan University, Toronto, ON, M5B 2K3, Canada; Chemical Engineering Department, Toronto Metropolitan University, Toronto, ON, M5B 2K3, Canada
8 shared publications
Latest Publications
- 27 October 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (41) , 14934-14950
Computational modelling of host–guest interactions between a Ni( ii ) coordination complex and persistent organic pollutants
This work presents a predictive theoretical sensing strategy for hazardous POPs using a Ni( ii )-based coordination complex.
- 27 October 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (41) , 14934-14950
Computational modelling of host–guest interactions between a Ni( ii ) coordination complex and persistent organic pollutants
This work presents a predictive theoretical sensing strategy for hazardous POPs using a Ni( ii )-based coordination complex.
- 12 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (34) , 6794-6806
Predictive Molecular-Level Recognition of Pesticides by Co(II)-Based Coordination Polymer: A Theoretical Study of Host–Guest Interactions
The strategic design of advanced sensing materials for pesticides is increasingly challenged by regulatory restrictions and limited experimental accessibility to several hazardous agrochemicals. This work reports a comprehensive theoretical investigation of a well-characterized Co(II)-based coordination polymer (CP), synthesized using a slow diffusion process, as a potential sensing platform for pesticide recognition. The CP has been thoroughly characterized by X-ray single-crystal diffraction analysis, and its interaction with nine representative pesticides has been systematically explored using density functional theory (DFT) and time-dependent DFT. Optimized host–guest geometries reveal favorable binding affinities driven by a combination of hydrogen bonding, electrostatic interactions, π-interactions, etc., depending on the chemical nature and molecular structure of the pesticide. Optical response, chemical reactivities, charge transfer characteristics, frontier molecular orbital analysis, and noncovalent interaction (NCI) analyses provide molecular-level insights into the recognition mechanism and relative selectivity of the CP toward different pesticides. The results demonstrate that the electronic structure of the Co(II) coordination framework is sensitively modulated upon guest binding, highlighting its potential as a sensing material. This study establishes a predictive computational sensing strategy for environmentally relevant pesticides that are difficult to access experimentally (sometimes banned) and offers valuable guidelines for the future design of CP-based sensors targeting emerging and regulated contaminants.
- 12 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (34) , 6794-6806
Predictive Molecular-Level Recognition of Pesticides by Co(II)-Based Coordination Polymer: A Theoretical Study of Host–Guest Interactions
The strategic design of advanced sensing materials for pesticides is increasingly challenged by regulatory restrictions and limited experimental accessibility to several hazardous agrochemicals. This work reports a comprehensive theoretical investigation of a well-characterized Co(II)-based coordination polymer (CP), synthesized using a slow diffusion process, as a potential sensing platform for pesticide recognition. The CP has been thoroughly characterized by X-ray single-crystal diffraction analysis, and its interaction with nine representative pesticides has been systematically explored using density functional theory (DFT) and time-dependent DFT. Optimized host–guest geometries reveal favorable binding affinities driven by a combination of hydrogen bonding, electrostatic interactions, π-interactions, etc., depending on the chemical nature and molecular structure of the pesticide. Optical response, chemical reactivities, charge transfer characteristics, frontier molecular orbital analysis, and noncovalent interaction (NCI) analyses provide molecular-level insights into the recognition mechanism and relative selectivity of the CP toward different pesticides. The results demonstrate that the electronic structure of the Co(II) coordination framework is sensitively modulated upon guest binding, highlighting its potential as a sensing material. This study establishes a predictive computational sensing strategy for environmentally relevant pesticides that are difficult to access experimentally (sometimes banned) and offers valuable guidelines for the future design of CP-based sensors targeting emerging and regulated contaminants.
- 13 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 6132-6144
Carboxylato-O and Pyridyl-N Hybrid Bridging Zn(II)-Based Two-Dimensional Fluorescent Coordination Polymers as Anticancer Drugs
Zinc is the second most prevalent biometal found in the human body. Zn-based polymers have been gaining attention as anticancer drugs without interfering with the normal activites of cell lines. With this importance, we have synthesized Zn(II)-based 2D heterobridging coordination polymers, {[Zn(tdc)(bpms)(H2O)]n, (CP-1S)} and {[Zn(tdc)(bpds)(H2O)·2H2O]n, (CP-2S)} (tdc2-, 2,5-thiophene dicarboxylate; bpms, 4,4'-dipyridyl sulfide; and bpds, 4,4'-dipyridyl disulfide). The structures demonstrate that tdc2- bridges through monodentate coordination of carboxylate-O and (O, O)-chelation to neighboring Zn(II) centers to constitute the coordination polymer; bpms/bpds act as pyridyl-N connecting ligands and propagate almost perpendicular to the previous chain and design the 2D CPs. The materials emit in the blue region with fluorescence lifetimes of 6.08 ns (CP-1S) and 5.41 ns (CP-2S). The antiproliferative and apoptotic efficacies of the CPs have been studied in the presence of four cancer cell lines (human breast cancer cells (MCF-7), human prostate cancer cells (PC-3), lung carcinoma epithelial cells (A549), and triple-negative breast cancer cells (MDA-MB-231)) and have been compared with the standard anticancer drug, i.e., cisplatin. The CPs are not cytotoxic to the human fetal lung fibroblast cell line (WI-38), and the highest anticancer efficiency is observed against MCF-7 (IC50: 14.62 ± 1.49 (CP-1S) and 24.39 ± 1.23 μM (CP-2S) with reference to cisplatin (IC50, 6 μM). This study has a great deal of potential for the development of pharmaceuticals and provides an overview of the use of coordination polymers for medicinal purposes.
- 13 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 6132-6144
Carboxylato-O and Pyridyl-N Hybrid Bridging Zn(II)-Based Two-Dimensional Fluorescent Coordination Polymers as Anticancer Drugs
Zinc is the second most prevalent biometal found in the human body. Zn-based polymers have been gaining attention as anticancer drugs without interfering with the normal activites of cell lines. With this importance, we have synthesized Zn(II)-based 2D heterobridging coordination polymers, {[Zn(tdc)(bpms)(H2O)]n, (CP-1S)} and {[Zn(tdc)(bpds)(H2O)·2H2O]n, (CP-2S)} (tdc2-, 2,5-thiophene dicarboxylate; bpms, 4,4'-dipyridyl sulfide; and bpds, 4,4'-dipyridyl disulfide). The structures demonstrate that tdc2- bridges through monodentate coordination of carboxylate-O and (O, O)-chelation to neighboring Zn(II) centers to constitute the coordination polymer; bpms/bpds act as pyridyl-N connecting ligands and propagate almost perpendicular to the previous chain and design the 2D CPs. The materials emit in the blue region with fluorescence lifetimes of 6.08 ns (CP-1S) and 5.41 ns (CP-2S). The antiproliferative and apoptotic efficacies of the CPs have been studied in the presence of four cancer cell lines (human breast cancer cells (MCF-7), human prostate cancer cells (PC-3), lung carcinoma epithelial cells (A549), and triple-negative breast cancer cells (MDA-MB-231)) and have been compared with the standard anticancer drug, i.e., cisplatin. The CPs are not cytotoxic to the human fetal lung fibroblast cell line (WI-38), and the highest anticancer efficiency is observed against MCF-7 (IC50: 14.62 ± 1.49 (CP-1S) and 24.39 ± 1.23 μM (CP-2S) with reference to cisplatin (IC50, 6 μM). This study has a great deal of potential for the development of pharmaceuticals and provides an overview of the use of coordination polymers for medicinal purposes.
- Open Access
- 18 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-23
Extraction of kaolin and tribo informative analysis of the Al-kaolin composite through machine learning approaches
Microwave fabrication of aluminium composites has emerged as a novel and trending technique in the current industrial landscape due to its efficiency and energy-saving potential. In this study, Al-kaolin composites were fabricated using microwave energy techniques, focusing on predictive modelling of the microwave-assisted Al-kaolin composite’s wear rate and coefficient of friction (COF). The fabricated composites were evaluated for hardness, wear rate, and coefficient of friction (COF) under varying parameters. It was observed that 4 wt% kaolin is the optimal reinforcement fraction, resulting in a 34% improvement in tensile strength, while hardness showed a consistent increase up to 4 wt% Kaolin, reaching a maximum value of 96 RHC. Additionally, wear rate and COF exhibited a decreasing trend with increasing kaolin content, indicating enhanced tribological performance. The lowest wear rate of 3.2 × 10⁻4 mm3/Nm and COF of 0.42 were observed for the 4 wt% Kaolin composite, demonstrating improved wear resistance. To further understand and predict the behaviour of the composites, a systematic dataset was collected, and various machine learning (ML) models were trained and tested for predictive modelling of wear rate and COF. Among the trained models, XGBoost demonstrated the highest predictive accuracy, achieving 94.33% for wear rate and 94.62% for COF. A feature importance analysis revealed that the standard of distance (Sod) was the most influential parameter affecting these outputs.
- 18 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-23
Open AccessExtraction of kaolin and tribo informative analysis of the Al-kaolin composite through machine learning approaches
Microwave fabrication of aluminium composites has emerged as a novel and trending technique in the current industrial landscape due to its efficiency and energy-saving potential. In this study, Al-kaolin composites were fabricated using microwave energy techniques, focusing on predictive modelling of the microwave-assisted Al-kaolin composite’s wear rate and coefficient of friction (COF). The fabricated composites were evaluated for hardness, wear rate, and coefficient of friction (COF) under varying parameters. It was observed that 4 wt% kaolin is the optimal reinforcement fraction, resulting in a 34% improvement in tensile strength, while hardness showed a consistent increase up to 4 wt% Kaolin, reaching a maximum value of 96 RHC. Additionally, wear rate and COF exhibited a decreasing trend with increasing kaolin content, indicating enhanced tribological performance. The lowest wear rate of 3.2 × 10⁻4 mm3/Nm and COF of 0.42 were observed for the 4 wt% Kaolin composite, demonstrating improved wear resistance. To further understand and predict the behaviour of the composites, a systematic dataset was collected, and various machine learning (ML) models were trained and tested for predictive modelling of wear rate and COF. Among the trained models, XGBoost demonstrated the highest predictive accuracy, achieving 94.33% for wear rate and 94.62% for COF. A feature importance analysis revealed that the standard of distance (Sod) was the most influential parameter affecting these outputs.
- 17 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 5 (6) , 2990-3005
Ratiometric pH Sensing, Photophysics, and Cell Imaging of Nonaromatic Light-Emitting Polymers
Here, four nontraditional fluorescent polymers (NTFPs) of varying N,N-dimethyl-2-propenamide (DMPA) and butyl prop-2-enoate (BPE) mole ratios, i.e., 2:1 (NTFP1), 4:1 (NTFP2), 8:1 (NTFP3), and 16:1 (NTFP4), are prepared via random polymerization in water. The maximum fluorescence enhancement of NTFP3 makes it suitable for ratiometric pH sensing, Cu(II) sensing, and pH-dependent cell imaging of Madin-Darby canine kidney (MDCK) cells. The oxygen donor functionalities of NTFP3 involved in binding and sensing with Cu(II) ions are studied by absorption, emission, electron paramagnetic resonance, Fourier transform infrared (FTIR), and O1s/Cu2p X-ray photoelectron spectroscopies (XPS). The spectral responses of the ratiometric pH sensor within 1.5-11.5 confirm 22 and 44 nm red shifts in absorption and ratiometric emission, respectively. The striking color changes from blue (436 nm) to green (480 nm) via an increase in pH are thought to be the stabilization of the charged canonical form of tertiary amide, i.e., -C(O-)═N+(CH3)2, realized from the changes in the absorption/fluorescence spectra and XPS/FTIR analyses. The through-space n-π* interactions in the NTFP3 aggregate, N-branching-associated rigidity, and nonconventional intramolecular hydrogen bondings of adjacent NTFP3 moieties in the NTFP3 aggregate contribute to aggregation-enhanced emissions (AEEs). Here, structures of NTFP3, NTFP3 aggregate, and Cu(II)-NTFP3; absorption; n-π* interactions; hydrogen bondings; AEEs; and binding with Cu(II) are ascertained by density functional theory, time-dependent density functional theory, and reduced density gradient calculations. The excellent limits of detection and Stern-Volmer constants of NTFP3 are 2.24 nM/0.14234 ppb and 4.26 × 103 M-1 at pH = 6.5 and 0.95 nM/0.06037 ppb and 4.90 × 103 M-1 at pH = 8.0, respectively. Additionally, the Stokes shift and binding energy of NTFP3 are 13,636 cm-1/1.69 eV and -4.64 eV, respectively. The pH-dependent MDCK cell imaging ability of noncytotoxic NTFP3 is supported via fluorescence imaging and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay.
- 17 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 5 (6) , 2990-3005
Ratiometric pH Sensing, Photophysics, and Cell Imaging of Nonaromatic Light-Emitting Polymers
Here, four nontraditional fluorescent polymers (NTFPs) of varying N,N-dimethyl-2-propenamide (DMPA) and butyl prop-2-enoate (BPE) mole ratios, i.e., 2:1 (NTFP1), 4:1 (NTFP2), 8:1 (NTFP3), and 16:1 (NTFP4), are prepared via random polymerization in water. The maximum fluorescence enhancement of NTFP3 makes it suitable for ratiometric pH sensing, Cu(II) sensing, and pH-dependent cell imaging of Madin-Darby canine kidney (MDCK) cells. The oxygen donor functionalities of NTFP3 involved in binding and sensing with Cu(II) ions are studied by absorption, emission, electron paramagnetic resonance, Fourier transform infrared (FTIR), and O1s/Cu2p X-ray photoelectron spectroscopies (XPS). The spectral responses of the ratiometric pH sensor within 1.5-11.5 confirm 22 and 44 nm red shifts in absorption and ratiometric emission, respectively. The striking color changes from blue (436 nm) to green (480 nm) via an increase in pH are thought to be the stabilization of the charged canonical form of tertiary amide, i.e., -C(O-)═N+(CH3)2, realized from the changes in the absorption/fluorescence spectra and XPS/FTIR analyses. The through-space n-π* interactions in the NTFP3 aggregate, N-branching-associated rigidity, and nonconventional intramolecular hydrogen bondings of adjacent NTFP3 moieties in the NTFP3 aggregate contribute to aggregation-enhanced emissions (AEEs). Here, structures of NTFP3, NTFP3 aggregate, and Cu(II)-NTFP3; absorption; n-π* interactions; hydrogen bondings; AEEs; and binding with Cu(II) are ascertained by density functional theory, time-dependent density functional theory, and reduced density gradient calculations. The excellent limits of detection and Stern-Volmer constants of NTFP3 are 2.24 nM/0.14234 ppb and 4.26 × 103 M-1 at pH = 6.5 and 0.95 nM/0.06037 ppb and 4.90 × 103 M-1 at pH = 8.0, respectively. Additionally, the Stokes shift and binding energy of NTFP3 are 13,636 cm-1/1.69 eV and -4.64 eV, respectively. The pH-dependent MDCK cell imaging ability of noncytotoxic NTFP3 is supported via fluorescence imaging and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay.
- 22 August 2021
- Published by Wiley in Advanced Optical Materials
- Vol. 9 (21) , 2100802
Synthesis of Nonaromatic Macromolecular Luminogens, DFT Studies on Photophysics, and O‐Donor Selective On−Off Sensors: Contributions of In Situ N‐(Methylol)Acrylamido Comonomers
The development of intrinsically luminescent multifunctional macromolecules and understanding their fluorescence characteristics are highly desirable to broaden further the scope of nontraditional macromolecular luminogens. Here, two nontraditional macromolecular luminogens, such as 2‐(methacryloyloxy)ethanol‐co‐2‐hydroxyethyl 3‐(N‐(methylol)acrylamido)‐2‐methylpropanoate‐co‐N‐(methylol)‐2‐propenamide (MAE‐co‐HENMAMMP‐co‐NMPA, ML1) and 2‐methylenesuccinic acid‐co‐2‐((N‐(methylol)acrylamido)methyl)succinic acid‐co‐N‐(methylol)‐2‐propenamide (MSA‐co‐NMAMMSA‐co‐NMPA, ML2) are synthesized via in situ inclusions of N‐(methylol)acrylamido‐ester and N‐(methylol)acrylamido‐acid comonomers by the polymerization of two synthetic monomers. These luminogens are suitable for sensing alongside exclusion of paramagnetic ions, i.e., Cu(II) and Fe(III). The structures of ML1 and ML2, in situ protruded HENMAMMP/NMAMMSA, and aggregation‐enhanced emissions (AEEs) are explored thoroughly. The through‐space electronic interactions from n/π of HENMAMMP + NMPA and NMAMMSA + MSA fragments to π* of HENMAMMP + MAE and NMAMMSA in ML1 and ML2, respectively, and hydrogen bonding among >CON− of HENMAMMP and −CONH− of NMPA in ML1 and −COOH/−COOH of MSA and −COOH/−CH2OH of NMAMMSA in ML2 collectively form clusteroluminogens, comprehended by reduced density gradient (RDG) calculations. The O‐donor selective coordinative interactions of paramagnetic Cu(II) and Fe(III) and substantial adsorption from aqueous solutions (concentrated) are analyzed through X‐ray photoelectron spectroscopy (XPS) spectra and density functional theory (DFT) studies of ML1/ML2 and Cu(II)‐ML1/Fe(III)‐ML2.
- 22 August 2021
- Published by Wiley in Advanced Optical Materials
- Vol. 9 (21) , 2100802
Synthesis of Nonaromatic Macromolecular Luminogens, DFT Studies on Photophysics, and O‐Donor Selective On−Off Sensors: Contributions of In Situ N‐(Methylol)Acrylamido Comonomers
The development of intrinsically luminescent multifunctional macromolecules and understanding their fluorescence characteristics are highly desirable to broaden further the scope of nontraditional macromolecular luminogens. Here, two nontraditional macromolecular luminogens, such as 2‐(methacryloyloxy)ethanol‐co‐2‐hydroxyethyl 3‐(N‐(methylol)acrylamido)‐2‐methylpropanoate‐co‐N‐(methylol)‐2‐propenamide (MAE‐co‐HENMAMMP‐co‐NMPA, ML1) and 2‐methylenesuccinic acid‐co‐2‐((N‐(methylol)acrylamido)methyl)succinic acid‐co‐N‐(methylol)‐2‐propenamide (MSA‐co‐NMAMMSA‐co‐NMPA, ML2) are synthesized via in situ inclusions of N‐(methylol)acrylamido‐ester and N‐(methylol)acrylamido‐acid comonomers by the polymerization of two synthetic monomers. These luminogens are suitable for sensing alongside exclusion of paramagnetic ions, i.e., Cu(II) and Fe(III). The structures of ML1 and ML2, in situ protruded HENMAMMP/NMAMMSA, and aggregation‐enhanced emissions (AEEs) are explored thoroughly. The through‐space electronic interactions from n/π of HENMAMMP + NMPA and NMAMMSA + MSA fragments to π* of HENMAMMP + MAE and NMAMMSA in ML1 and ML2, respectively, and hydrogen bonding among >CON− of HENMAMMP and −CONH− of NMPA in ML1 and −COOH/−COOH of MSA and −COOH/−CH2OH of NMAMMSA in ML2 collectively form clusteroluminogens, comprehended by reduced density gradient (RDG) calculations. The O‐donor selective coordinative interactions of paramagnetic Cu(II) and Fe(III) and substantial adsorption from aqueous solutions (concentrated) are analyzed through X‐ray photoelectron spectroscopy (XPS) spectra and density functional theory (DFT) studies of ML1/ML2 and Cu(II)‐ML1/Fe(III)‐ML2.
- 18 November 2020
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 42 (2) , e2000522
Nonconjugated Biocompatible Macromolecular Luminogens for Sensing and Removals of Fe(III) and Cu(II): DFT Studies on Selective Coordination(s) and On‐Off Sensing
This work reports the design and synthesis of two nonaromatic biocompatible macromolecular luminogens, i.e., 2‐(dimethylamino)ethyl methacrylate‐co‐2‐(dimethylamino)ethyl 3‐(N‐(methylol)acrylamido)‐2‐methylpropanoate‐co‐N‐(methylol)acrylamide/DMAEMA‐co‐DMAENMAMP‐co‐NMA (P1) and methacrylic acid‐co‐3‐(N‐(methylol)acrylamido)‐2‐methylpropanoic acid‐co‐N‐(methylol)acrylamide/MEA‐co‐NMAMPA‐co‐NMA (P2), prepared through in situ anchored acrylamido‐ester/DMAENMAMP and acrylamido‐acid/NMAMPA third comonomers, respectively, in a facile polymerization of two non‐luminous monomers in water medium to circumvent the drawbacks related to aggregation‐caused quenching of aromatic luminogens. The structures of P1/P2, in situ anchored comonomers, fluorophores, N‐branching associated n–π* interactions, and hydrogen bonding assisted aggregation‐enhanced emissions are comprehended by nuclear magnetic resonance, Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), ultraviolet‐visible, thermogravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence lifetime, and fluorescence imaging. P1 and P2 are appropriate for sensitive detections/exclusions of Fe(III)/Cu(II) and cell‐imaging. The intrinsic fluorescence, on‐off sensing, selective coordinations of Fe(III) and Cu(II) with fluorophores, emission quenching mechanisms, and removals of Fe(III) and Cu(II) are investigated by DFT/NTO analyses of P1/P2 and Fe(III)‐P1 and Cu(II)‐P2 complexes, XPS, and isotherms and kinetics parameters. The excellent biocompatibilities, comparable limit of detections, i.e., 1.70 × 10−7 and 1.59 × 10−7 [m], and higher adsorption capacities, i.e., 77.25 and 154.13 mg g−1, at low ppm; 303 K; and pH = 7 compel P1/P2 to be acceptable for multipurpose applications.
- 18 November 2020
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 42 (2) , e2000522
Nonconjugated Biocompatible Macromolecular Luminogens for Sensing and Removals of Fe(III) and Cu(II): DFT Studies on Selective Coordination(s) and On‐Off Sensing
This work reports the design and synthesis of two nonaromatic biocompatible macromolecular luminogens, i.e., 2‐(dimethylamino)ethyl methacrylate‐co‐2‐(dimethylamino)ethyl 3‐(N‐(methylol)acrylamido)‐2‐methylpropanoate‐co‐N‐(methylol)acrylamide/DMAEMA‐co‐DMAENMAMP‐co‐NMA (P1) and methacrylic acid‐co‐3‐(N‐(methylol)acrylamido)‐2‐methylpropanoic acid‐co‐N‐(methylol)acrylamide/MEA‐co‐NMAMPA‐co‐NMA (P2), prepared through in situ anchored acrylamido‐ester/DMAENMAMP and acrylamido‐acid/NMAMPA third comonomers, respectively, in a facile polymerization of two non‐luminous monomers in water medium to circumvent the drawbacks related to aggregation‐caused quenching of aromatic luminogens. The structures of P1/P2, in situ anchored comonomers, fluorophores, N‐branching associated n–π* interactions, and hydrogen bonding assisted aggregation‐enhanced emissions are comprehended by nuclear magnetic resonance, Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), ultraviolet‐visible, thermogravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence lifetime, and fluorescence imaging. P1 and P2 are appropriate for sensitive detections/exclusions of Fe(III)/Cu(II) and cell‐imaging. The intrinsic fluorescence, on‐off sensing, selective coordinations of Fe(III) and Cu(II) with fluorophores, emission quenching mechanisms, and removals of Fe(III) and Cu(II) are investigated by DFT/NTO analyses of P1/P2 and Fe(III)‐P1 and Cu(II)‐P2 complexes, XPS, and isotherms and kinetics parameters. The excellent biocompatibilities, comparable limit of detections, i.e., 1.70 × 10−7 and 1.59 × 10−7 [m], and higher adsorption capacities, i.e., 77.25 and 154.13 mg g−1, at low ppm; 303 K; and pH = 7 compel P1/P2 to be acceptable for multipurpose applications.
- 1 September 2020
- Published by Taylor & Francis
- p. 225-266
Smart Lightweight Polymer Composites
The invention of quick, responsive, smart, multifunctional, lightweight polymer composites has been proven to be a boon in modern human civilization, and they are becoming increasingly popular to meet the various needs of fast-moving society. In order to mitigate various negative aspects of the modern times including unwanted radiation/sound pollution and energy crisis, the development and effective utilization of various polymeric, lightweight, smart materials are crucial in the fields of pollution abatement and non-conventional energy sectors. Therefore, the present chapter reports on three major types of smart, lightweight, polymer composites, i.e., magnetostrictive and magnetorheological polymer composites, electromagnetic radiation absorber material, and piezoelectric materials, of which magnetic field sensitive and electromagnetic radiation absorber materials are suitable as absorbers of unwanted sound waves and radiation, whereas the latter has huge prospects as non-conventional energy resources. Herein, the recent advances in the syntheses, properties, performance potentials, and application prospects of smart materials are covered, giving special emphasis to the roles of variable factors in determining the nature of complicated response and performances of the aforementioned materials.
- 1 September 2020
- Published by Taylor & Francis
- p. 225-266
Smart Lightweight Polymer Composites
The invention of quick, responsive, smart, multifunctional, lightweight polymer composites has been proven to be a boon in modern human civilization, and they are becoming increasingly popular to meet the various needs of fast-moving society. In order to mitigate various negative aspects of the modern times including unwanted radiation/sound pollution and energy crisis, the development and effective utilization of various polymeric, lightweight, smart materials are crucial in the fields of pollution abatement and non-conventional energy sectors. Therefore, the present chapter reports on three major types of smart, lightweight, polymer composites, i.e., magnetostrictive and magnetorheological polymer composites, electromagnetic radiation absorber material, and piezoelectric materials, of which magnetic field sensitive and electromagnetic radiation absorber materials are suitable as absorbers of unwanted sound waves and radiation, whereas the latter has huge prospects as non-conventional energy resources. Herein, the recent advances in the syntheses, properties, performance potentials, and application prospects of smart materials are covered, giving special emphasis to the roles of variable factors in determining the nature of complicated response and performances of the aforementioned materials.
- 3 August 2020
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 3 (9) , 6155-6166
Intrinsically Fluorescent Biocompatible Terpolymers for Detection and Removal of Bi(III) and Cell Imaging
The intrinsically-fluorescent biocompatible multifunctional multipurpose terpolymers, i.e., methyl methacrylate-co-methyl 3-(N-isopropylacrylamido)-2-methylpropanoate-co-N-isopropylacrylamide (MMA-co-MNIPAMP-co-NIPAm, 1) and methyl methacrylate-co-methyl 3-(N-hydroxymethylacrylamido)-2-methylpropanoate-co-N-hydroxymethylacrylamide (MMA-co-MNHMAMP-co-NHMAm, 2), were synthesized via situ attached acrylamido-ester monomers during polymerization of hydrophobic-monomers in water medium. These nonconjugated fluorescent terpolymers envisaging the aggregation-enhanced emissions (AEEs) were suitable for Bi(III) sensors, Bi(III) removal, cell-imaging, and security inks. The fluorescence properties, mechanism of quenching, interactions of Bi(III) with 1/ 2, and Bi(III) adsorption were explored theoretical analyses of 1, 2, Bi(III)-1, and Bi(III)-2. Considering the overall properties, 1 was more suitable for diverse prospective applications.
- 3 August 2020
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 3 (9) , 6155-6166
Intrinsically Fluorescent Biocompatible Terpolymers for Detection and Removal of Bi(III) and Cell Imaging
The intrinsically-fluorescent biocompatible multifunctional multipurpose terpolymers, i.e., methyl methacrylate-co-methyl 3-(N-isopropylacrylamido)-2-methylpropanoate-co-N-isopropylacrylamide (MMA-co-MNIPAMP-co-NIPAm, 1) and methyl methacrylate-co-methyl 3-(N-hydroxymethylacrylamido)-2-methylpropanoate-co-N-hydroxymethylacrylamide (MMA-co-MNHMAMP-co-NHMAm, 2), were synthesized via situ attached acrylamido-ester monomers during polymerization of hydrophobic-monomers in water medium. These nonconjugated fluorescent terpolymers envisaging the aggregation-enhanced emissions (AEEs) were suitable for Bi(III) sensors, Bi(III) removal, cell-imaging, and security inks. The fluorescence properties, mechanism of quenching, interactions of Bi(III) with 1/ 2, and Bi(III) adsorption were explored theoretical analyses of 1, 2, Bi(III)-1, and Bi(III)-2. Considering the overall properties, 1 was more suitable for diverse prospective applications.