KYKi Ro Yoon

Ki Ro Yoon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ki Ro Yoon has a total of 203 co-authors. Here are the top co-authors by number of shared publications:

  • Ji Hyun Lee

    Advanced Textile R&D Department Korea Institute of Industrial Technology (KITECH) 143, Hanggaul‐ro, Sangnok‐gu Ansan Gyeonggi‐do 15588 Republic of Korea

    8 shared publications
  • Il-Doo Kim

    Korea Advanced Institute of Science and Technology

    7 shared publications
  • Ji-Won Jung

    Department of Materials Science and Engineering, KonKuk University, 120, Neungdong-road, Gwangjin-gu, Seoul 05029, Republic of Korea

    6 shared publications
  • Ji-Won Jung

    Department of Materials Science and Engineering Konkuk University Seoul Republic of Korea

    6 shared publications
  • Kyung Ah Lee

    Naval Ship System R&D Team Hanwha Ocean 14, Sejong‐daero, Jung‐gu Seoul 04527 Republic of Korea

    6 shared publications
  • Kwang Won Kim

    Advanced Textile R&D Department Korea Institute of Industrial Technology (KITECH) 143, Hanggaul‐ro, Sangnok‐gu Ansan Gyeonggi‐do 15588 Republic of Korea

    5 shared publications

Latest Publications

  • Electrified catalytic filtration for integrated mitigation of hazardous airborne VOCs and bioaerosols

    by Hyunji Lee, Seunghee Kim, Chanhwi Lee, Sohyun Kang, Young-Woo You, Hyun-Tak Kim, Ki Ro Yoon, Il-Doo Kim, Joonseok Lee, Sang-Joon Kim

  • Open Access

    Polyimide–skinned sandwich separator fabricated through centrifugal jet spinning for stable lithium–metal batteries

    by Ji-Won Jung, Dae–Kwon Boo, Jeong-Ho Park, Soobin Lee, Ho–Jin Lee, Su Yeon Bae, Myeong–Oh Song, Ki Ro Yoon, Wonchang Choi, Jungho Jin, et al.

    Lithium–metal batteries (LMBs) offer higher energy densities than conventional lithium–ion batteries, but uneven Li deposition and the thermomechanical limitations of commercial polyolefin separators promote dendrite formation, internal short–circuiting, and safety concerns. This study proposes a polyimide (PI)/polyethylene (PE)/PI sandwich–type separator (CPI@PE@CPI) fabricated through high–throughput centrifugal jet spinning. Ultrathin CPI nanofiber skins form thermally stable and lithiophilic interfaces that enhance electrolyte wettability, homogenize Li+ flux, and suppress dendritic growth, while the PE core maintains mechanical integrity and dimensional stability. The hierarchical porous architecture of CPI facilitates ion transport and interfacial contact without compromising gravimetric energy density. Compared with the commercial PE separator, the CPI–based separators exhibit improved ionic conductivity, enhanced interfacial stability in Li/Li symmetric cells, and superior cycling stability in Li/NCM half–cells. Furthermore, the CPI@PE@CPI configuration provides bidirectional Li+ flux regulation, enabling stable operation, even under high–temperature conditions. Owing to the simplicity and scalability of centrifugal jet spinning, this study proposes a practical separator design that couples industrial feasibility with enhanced electrochemical performance and thermal safety for next–generation Li–metal batteries.

  • Open Access

    Harnessing β-chitin acetyl-amide chemistry for the fabrication of robust, lightweight, and sustainable aqueous zinc-ion battery separators via centrifugal jet spinning

    by Jeong-Ho Park, Jin-Hyuk Lee, Hyeon Min Cho, Ilgyu Kim, Ho–Jin Lee, Soobin Lee, Dae–Kwon Boo, Jae-Hyuk Cho, Su Yeon Bae, Jun Young Cheong, et al.

    The development of robust and sustainable separators is paramount for the practical implementation of aqueous Zn-ion batteries (AZIBs). Herein, we report a high-performance β-chitin nanofiber separator (β-ChNF-S) designed to address the chronic issues of Zn dendrite growth and parasitic side reactions. Leveraging the unique acetyl-amide chemistry of β-chitin, the β-ChNF-S separator, fabricated via a scalable centrifugal jet spinning process, acts as an active interfacial medium rather than a passive barrier. Our findings demonstrate that the β-ChNF-S separator effectively perturbs the [Zn(H2O)6]2+ solvation shell, facilitating desolvation and homogenizing Zn2+ flux. Furthermore, the intrinsic hydrogen-bonding network of chitin regulates interfacial pH by retarding OH– diffusion, thereby suppressing the formation of insulating byproducts. Consequently, an AZIB cell prepared using the β-ChNF-S exhibits an exceptional cycling stability of over 1,200 h at high-current densities with a dendrite-free morphology. This work provides a new strategy for utilizing biomass-derived polymers to engineer sophisticated interfaces for next-generation, eco-friendly energy storage systems.

  • Thermal protocol-driven oxidative etching of ZrC Embedded carbon nanofibers to unlock ZrO x C y nanodomains for selective H 2 O 2 production

    by Changho Lee, Soobin Lee, Haeun Baeg, Wenjun Zhang, Hyunmin Na, Su Yeon Bae, Min Soo Kim, Il-Doo Kim, Wonchang Choi, Tae-Gwang Yun, et al.

    Protocol-programmed oxidative etching reveals ZrO x C y nanodomains on CNFs, creating Zr–O–C interfaces that tune oxygenated-intermediate binding and promote selective electrochemical H 2 O 2 production.

  • Open Access

    Overcoming Thickness–Durability Trade‐Off in PEM Fuel Cells via Stretched PTFE Nanofiber‐Reinforced Composite Membranes

    by Ji Hyun Lee, Kyung Ah Lee, Kwang Won Kim, Seung Hwan Kim, Yeram Shin, Sang Young Yeo, Song Jun Doh, Jeong F. Kim, Sungjun Kim, Seon‐Jin Choi, et al.

    Reinforced composite membranes (RCMs), composed of electrospun porous nanofiber (NF) and perfluorosulfonic acid (PFSA), have garnered considerable attention for achieving high durability in proton exchange membrane (PEM) fuel cells. However, electrospinning faces critical challenges in producing thin NF mats essential for fabricating ultrathin RCMs that reduce ohmic resistance. Herein, thermomechanical stretching is presented to fabricate ultrathin polytetrafluoroethylene (PTFE) NF‐based reinforcements. Stretching the PTFE NF by 2‐ and 3‐fold not only reduces their thickness but also increases porosity, facilitating efficient PFSA impregnation. Notably, the 3‐fold stretched PTFE‐based RCM (3‐sPTFE RCM), with ultrathin thickness (−2 at 0.6 V and a maximum power density of 1.99 W cm −2 . Furthermore, the 3‐sPTFE RCM maintains long‐term operational durability, with low hydrogen crossover current (−2 at 0.4 V) even after 21,000 wet/dry cycles, exceeding the U.S. Department of Energy (DOE) durability targets for automotive membrane applications. This fabrication strategy for ultrathin PTFE NF reinforcements offers a promising pathway toward the next generation of high‐performance and durable PEM fuel cells.


  • Design of Scalable and Flexible Supercapacitors Based on Mulberry Paper: Optimizing Electrochemical Performance and Reliability

    by Seonghun Lee, Ji Young Park, Hyungsub Yoon, Yubin Park, Ji Hyun Lee, Ki Ro Yoon, Li-Yang Liu, Byungil Hwang, Tae Gwang Yun

    Paper-based supercapacitors are emerging as promising alternatives for next-generation wearable energy storage applications, attributed to their renewable feedstocks, scalability, flexibility, and lightweight properties. However, the inherent limited electrochemical conductivity and poor stability of paper remain significant challenges for making high-performance applications. In this study, we designed a scalable and flexible supercapacitor utilizing carbonized mulberry paper (cMP) to overcome these limitations. Electrochemical performance was maximized through the development of TiO2 nanoparticles strongly bonded to reduced graphene oxide on the surface of cMP fibers, which increased from 8.5 to 153 mF cm-2 at a scan rate of 5.0 mV s-1. The strongly bonded structure also improved electrochemical reliability. During long-term charge-discharge cycling tests, the designed electrode maintained 75% of its capacitance after 3000 cycles at 1.0 mA cm-2 and demonstrated an impressive retention of 80% at 8.0 mA cm-2. A large-scale flexible supercapacitor was realized by utilizing an electrode that demonstrated outstanding electrochemical performance and reliability. A large-area supercapacitor with a 40 cm2 electrode was successfully implemented, achieving a discharge time retention of 95.6% and capacitance retention of 99.3% even under repetitive twisting and bending. These engineering results unveil possibilities for scalable and flexible supercapacitors.


  • Open Access

    Membrane Reinforcement Strategy Using Robust Nanofibers for Durable and Safe AEM Water Electrolysis

    by Kwang Won Kim, Kyung Ah Lee, Ji Hyun Lee, Seung Hwan Kim, Jeong F. Kim, Tae Hoon Kim, Sungjun Kim, Yung‐Eun Sung, Ki Ro Yoon

    Anion exchange membrane (AEM) water electrolysis offers a sustainable route to green hydrogen but is limited by low ionic conductivity, excessive swelling, and mechanical instability under high‐pressure conditions. Here, a reinforced composite membrane (RCM) comprising Fumion FAA‐3 (FuMa‐Tech) ionomer infiltrated into an electrospun polytetrafluoroethylene (PTFE) nanofiber (NF) network is reported. The porous PTFE NF scaffold enhances dimensional stability and structural integrity, mitigating swelling‐induced degradation while preserving efficient hydroxide‐ion transport. Embedded PTFE fibers also serve as physical barriers at the electrode interface, reducing gas crossover and minimizing short‐circuit risk. The resulting PTFE/FAA RCM, with a thickness of ≈50 µm, exhibits an initial current density of 2.9 A cm −2 at 2.0 V and maintains stable operation for over 1000 h under 1 m KOH at 70 °C. Mechanical testing confirms significant improvements in tensile strength and elongation at break compared to pure ionomer films. Electrochemical impedance spectroscopy demonstrates reduced charge transfer and ohmic resistances, correlating with enhanced ionic pathways and membrane robustness. These findings underscore the potential of NF‐reinforced composite architectures to overcome key AEM limitations, enabling durable, high‐performance water electrolysis systems and advancing the commercialization of cost‐effective, safe hydrogen production.


  • Ni–deficient NiO/downsized RuO2 composite catalyst with rivalrous size evolution for rechargeable Li–CO2 batteries

    by Dae–Kwon Boo, Huiju Kim, Seung Jae Kwak, Ho–Jin Lee, Yeji Lim, Yoonjeong Yoo, Hyechan Park, Junhyuk Tak, Ji Hyun Lee, Jae–Woo Seo, et al.


  • Open Access

    Thermally Stable Al2O3/PTFE Composite Separator for High-Safety Lithium-Ion Batteries

    by Kwang Won Kim, Ji Hyun Lee, Seoyoon Shin, Ilgyu Kim, Tae Gwang Yun, Byungil Hwang, Seon-Jin Choi, Ji-Won Jung, Ki Ro Yoon

    In response to the growing demand for carbon neutrality and safer energy storage, advanced separator technology is essential for ensuring the stability of lithium-ion batteries (LIBs). Conventional separators, typically made from polyolefin-based polymers, suffer from low thermal stability and poor wettability, leading to safety and performance concerns. In this study, we fabricated a nonwoven polytetrafluoroethylene (PTFE) nanofiber (NF) separator using emulsion electrospinning incorporating aluminum oxide (Al2O3) particles without polymeric binders. The resulting nonwoven PTFE NF separator demonstrated superior porosity, thermal stability, and electrolyte wettability compared to conventional polyolefin-based separators. Its excellent thermal stability and elongation properties make it more durable for practical battery applications. Furthermore, plasma surface modification of the Al2O3–PTFE NF enhanced electrolyte wettability, improving ionic conductivity (2.79 mS cm–1) and boosting the overall electrochemical performance of LIB cells. These advancements highlight the PTFE NF separator as a promising candidate for safer, more efficient energy storage components, addressing critical challenges in LIB safety and performance.


  • Open Access

    Stretched PTFE nanofiber nonwovens for superior air permeability and dust holding capacity in PM filtration

    by Ji Hyun Lee, Yoonjin Kim, Hye Sun Hwang, Gyudong Lee, Song Jun Doh, Chulsang Youn, Honghee Lee, Seon-Jin Choi, Ki Ro Yoon