Karl Alexander Heufer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Karl Alexander Heufer has a total of 208 co-authors. Here are the top co-authors by number of shared publications:
- Malte Döntgen
Chair of High Pressure Gas Dynamics, Shock Wave Laboratory, RWTH Aachen University, Aachen 52056, Germany
15 shared publications - Henry J. Curran
Combustion Chemistry Centre, School of Biological and Chemical Sciences, Ryan Institute, MaREI
8 shared publications - Philipp Morsch
Chair of High Pressure Gas Dynamics RWTH Aachen University Aachen Germany
8 shared publications - Adrian Nolte
RWTH Aachen University - Chair of High Pressure Gas Dynamics (HGD)
7 shared publications - Matthias Preußker
Physico-Chemical Fundamentals of Combustion, RWTH Aachen University, 52062 Aachen, Germany
6 shared publications Stefan Pischinger
RWTH Aachen University - Chair of Thermodynamics of Mobile Energy Conversion Systems (TME)
6 shared publications
Latest Publications
- 10 November 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Systematic uncertainty evaluation of theoretical thermochemical parameters
- 10 November 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Systematic uncertainty evaluation of theoretical thermochemical parameters
- 5 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (46) , 9385-9398
Theoretical Unimolecular Decomposition Kinetics of Dimethyl, Diethyl, and Ethyl Methyl Carbonates and Their Fluorinated Counterparts
Dialkyl carbonates are relevant as sustainable fuel components and as lithium-ion battery electrolyte solvents, where their decomposition chemistry is important for combustion behavior, gas generation, and fire safety. In this work, the unimolecular decomposition kinetics of dimethyl carbonate, diethyl carbonate, ethyl methyl carbonate, and their fluorinated counterparts were investigated using the DLPNO–CCSD(T)/CBS // B97M-V/cc-pVTZ level of theory in combination with RRKM/Master Equation simulations. The resulting potential energy surfaces, bond dissociation energies, thermodynamic properties, and temperature- and pressure-dependent rate coefficients provide a consistent database for kinetic modeling of regular and fluorinated dialkyl carbonates. For the nonfluorinated compounds, the decomposition chemistry is governed by low-barrier molecular pathways, with diethyl carbonate (DEC) and ethyl methyl carbonate (EMC) predominantly forming alkoxyformic acids and ethylene, followed by rapid secondary decomposition to alcohols and carbon dioxide. Fluorination was found to generally strengthen C–H bonds and to suppress the dominant alkoxyformic acid-yielding pathways in fluorinated dialkyl carbonates with ethyl moieties. In contrast, fluorination of dimethyl carbonate decreases its stability because an energetically accessible F atom migration pathway accelerates fDMC decomposition by several orders of magnitude. Comparison with available experimental speciation data shows that the present rate coefficients perform comparably to existing models for DMC and DEC, have limited observable impact for EMC under the investigated high-temperature conditions, and improve CO predictions for fDEC pyrolysis. Among the investigated fluorinated carbonates, methyl 2,2,2-trifluoroethyl carbonate (fEMC) emerges as the most promising candidate in terms of combined unimolecular chemical stability and thermal buffering capacity, motivating further experimental and modeling studies of its potential as a safer lithium-ion battery solvent.
- 5 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (46) , 9385-9398
Theoretical Unimolecular Decomposition Kinetics of Dimethyl, Diethyl, and Ethyl Methyl Carbonates and Their Fluorinated Counterparts
Dialkyl carbonates are relevant as sustainable fuel components and as lithium-ion battery electrolyte solvents, where their decomposition chemistry is important for combustion behavior, gas generation, and fire safety. In this work, the unimolecular decomposition kinetics of dimethyl carbonate, diethyl carbonate, ethyl methyl carbonate, and their fluorinated counterparts were investigated using the DLPNO–CCSD(T)/CBS // B97M-V/cc-pVTZ level of theory in combination with RRKM/Master Equation simulations. The resulting potential energy surfaces, bond dissociation energies, thermodynamic properties, and temperature- and pressure-dependent rate coefficients provide a consistent database for kinetic modeling of regular and fluorinated dialkyl carbonates. For the nonfluorinated compounds, the decomposition chemistry is governed by low-barrier molecular pathways, with diethyl carbonate (DEC) and ethyl methyl carbonate (EMC) predominantly forming alkoxyformic acids and ethylene, followed by rapid secondary decomposition to alcohols and carbon dioxide. Fluorination was found to generally strengthen C–H bonds and to suppress the dominant alkoxyformic acid-yielding pathways in fluorinated dialkyl carbonates with ethyl moieties. In contrast, fluorination of dimethyl carbonate decreases its stability because an energetically accessible F atom migration pathway accelerates fDMC decomposition by several orders of magnitude. Comparison with available experimental speciation data shows that the present rate coefficients perform comparably to existing models for DMC and DEC, have limited observable impact for EMC under the investigated high-temperature conditions, and improve CO predictions for fDEC pyrolysis. Among the investigated fluorinated carbonates, methyl 2,2,2-trifluoroethyl carbonate (fEMC) emerges as the most promising candidate in terms of combined unimolecular chemical stability and thermal buffering capacity, motivating further experimental and modeling studies of its potential as a safer lithium-ion battery solvent.
- Open Access
- 4 November 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Experimental study of premixed flame quenching in narrow channels at Lewis numbers from 0.9 to 2.2
- 4 November 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessExperimental study of premixed flame quenching in narrow channels at Lewis numbers from 0.9 to 2.2
- Open Access
- 23 March 2026
- Published by Springer Nature in Shock Waves
- Vol. 36 (1) , 4
Design and testing of a novel low-cost C$_2$H$_2$–O$_2$ combustion driver for shock tubesA novel combustion driver is designed and tested to replace conventional helium drivers for the hypersonic shock wind tunnels. Stoichiometric acetylene and oxygen were chosen to minimize the production of water to prevent major corrosion in facilities not made of stainless steel. A single-burst diaphragm mechanism was employed, which was found to generate a reproducible shock tube process even in the presence of small variations in diaphragm scribe depth. The driver gas mixture was proven to burn entirely deflagrative for a single spark plug configuration. This is a major advantage compared to other combustion-driven shock tube designs found in the literature using oxyhydrogen diluted with helium, which requires a carefully designed ignition system in order to avoid the formation of pressure oscillations induced by local autoignition or detonation in the driver. High levels of dilution using argon were shown to maximize the available test time to approximately 5.5 ms for low-enthalpy conditions ( h 0 $$=$$ 1.12 MJ kg -1 ). Inhomogeneities in the driver temperature caused by the combustion in a closed vessel were correlated to the observed post-reflected-shock pressure traces in the experiments. However, the negative effects can be compensated for the given experimental setup by ignition at a single location near the diaphragm and conducting experiments at slightly undertailored interface conditions. The result of the present study is a novel, functioning combustion driver capable of replacing conventional helium drivers for low-enthalpy conditions with minimal modifications on the existing facility, which enables an experimentation at a fraction of the gas costs.- 23 March 2026
- Published by Springer Nature in Shock Waves
- Vol. 36 (1) , 4
Open AccessDesign and testing of a novel low-cost C$_2$H$_2$–O$_2$ combustion driver for shock tubesA novel combustion driver is designed and tested to replace conventional helium drivers for the hypersonic shock wind tunnels. Stoichiometric acetylene and oxygen were chosen to minimize the production of water to prevent major corrosion in facilities not made of stainless steel. A single-burst diaphragm mechanism was employed, which was found to generate a reproducible shock tube process even in the presence of small variations in diaphragm scribe depth. The driver gas mixture was proven to burn entirely deflagrative for a single spark plug configuration. This is a major advantage compared to other combustion-driven shock tube designs found in the literature using oxyhydrogen diluted with helium, which requires a carefully designed ignition system in order to avoid the formation of pressure oscillations induced by local autoignition or detonation in the driver. High levels of dilution using argon were shown to maximize the available test time to approximately 5.5 ms for low-enthalpy conditions ( h 0 $$=$$ 1.12 MJ kg -1 ). Inhomogeneities in the driver temperature caused by the combustion in a closed vessel were correlated to the observed post-reflected-shock pressure traces in the experiments. However, the negative effects can be compensated for the given experimental setup by ignition at a single location near the diaphragm and conducting experiments at slightly undertailored interface conditions. The result of the present study is a novel, functioning combustion driver capable of replacing conventional helium drivers for low-enthalpy conditions with minimal modifications on the existing facility, which enables an experimentation at a fraction of the gas costs. - 29 November 2025
- Published by Elsevier in Combustion and Flame
- Vol. 284
Ignition and combustion characteristics of cyclopentanone and cyclopentanone/gasoline blends: An experimental and modeling study
- 29 November 2025
- Published by Elsevier in Combustion and Flame
- Vol. 284
Ignition and combustion characteristics of cyclopentanone and cyclopentanone/gasoline blends: An experimental and modeling study
- 8 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
Ab Initio Investigation of Primary Fuel Reactions of Monoaromatic Hydrocarbons under Pyrolytic Conditions: Anisole, Phenetole, and the 2-, 3-, 4-Methylanisole Isomers
Wooden biomass contains high amounts of lignocellulose, which is one of the main fuel components during wildfire events. Furthermore, its properties in the context of alternative energy carriers are of interest in recent research. In order to better analyze and understand these highly complex molecules and their fundamental combustion properties, a complexity reduction by using model compounds can be applied. Monoaromatic oxygenated hydrocarbons (MAHs) are an option to map these systems on a more accessible level. In the present study, the MAHs anisole, phenetole, 2-methylanisole, 3-methylanisole, and 4-methylanisole were investigated by means of quantum chemical calculations. To this end, the DLPNO-CCSD(T)/CBS(cc-pVTZ, cc-pVQZ)//B3LYP-D3BJ/def2-TZVP levels of theory were utilized to derive a range of important physical and chemical quantities. These include bond dissociation energies (BDEs), one-dimensional representations of the potential energy surface, thermodynamic properties, and reaction rate parameters. As previously demonstrated, reactions of the aromatic ring structure and the attached hydrogen atoms are energetically unfavorable. This prompted the investigation of only the reactions affecting the methyl and alkoxy side chains. The reactions examined in this study are the primary fuel reactions that are relevant to pyrolysis. This set of 47 reactions includes the H atom abstraction by Ḣ and ĊH3, the unimolecular bond fissions, and the internal H atom migration reactions on the methoxy or ethoxy side chain. For all five molecules, the C-O bond on the alkoxy side chain is the weakest bond by BDEs, and the respective bond fissions are dominant. Besides the general importance of H atom abstractions, these dominant bond fissions have the highest impact on the overall reactivity among the investigated reactions. Due to the comprehensive amount of available literature for anisole, it is included as a benchmark molecule. The available literature on phenetole is limited, and the present study provides fundamental data for this species. For methylanisole, a recent publication focused on experimental and modeling efforts for these isomers. The importance of the C-O bond breaking, and the other determined reactions in this work were tested by including the calculated rate parameters in a validated chemical kinetic mechanism for methylanisole isomers from literature. The modified model was subsequently assessed in comparison to the initial version of the published model and experiments. Shock tube and rapid compression machine experiments were performed in the temperature range between 880 and 1220 K for pressures of 10 and 20 bar at stoichiometric conditions. This assessment yielded two notable findings. First, it confirmed the significant impact of the C-O bond fission. However, a comparison with recent high-level ab initio calculations revealed significant deviations in the rate constants. Second, it emphasized the importance of the subsequent phenoxy/methylphenoxy radical chemistry and the associated thermodynamic properties. Further refinement of the model descriptions of MAHs is warranted and necessary to improve the understanding of these important reference molecules.
- 8 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
Ab Initio Investigation of Primary Fuel Reactions of Monoaromatic Hydrocarbons under Pyrolytic Conditions: Anisole, Phenetole, and the 2-, 3-, 4-Methylanisole Isomers
Wooden biomass contains high amounts of lignocellulose, which is one of the main fuel components during wildfire events. Furthermore, its properties in the context of alternative energy carriers are of interest in recent research. In order to better analyze and understand these highly complex molecules and their fundamental combustion properties, a complexity reduction by using model compounds can be applied. Monoaromatic oxygenated hydrocarbons (MAHs) are an option to map these systems on a more accessible level. In the present study, the MAHs anisole, phenetole, 2-methylanisole, 3-methylanisole, and 4-methylanisole were investigated by means of quantum chemical calculations. To this end, the DLPNO-CCSD(T)/CBS(cc-pVTZ, cc-pVQZ)//B3LYP-D3BJ/def2-TZVP levels of theory were utilized to derive a range of important physical and chemical quantities. These include bond dissociation energies (BDEs), one-dimensional representations of the potential energy surface, thermodynamic properties, and reaction rate parameters. As previously demonstrated, reactions of the aromatic ring structure and the attached hydrogen atoms are energetically unfavorable. This prompted the investigation of only the reactions affecting the methyl and alkoxy side chains. The reactions examined in this study are the primary fuel reactions that are relevant to pyrolysis. This set of 47 reactions includes the H atom abstraction by Ḣ and ĊH3, the unimolecular bond fissions, and the internal H atom migration reactions on the methoxy or ethoxy side chain. For all five molecules, the C-O bond on the alkoxy side chain is the weakest bond by BDEs, and the respective bond fissions are dominant. Besides the general importance of H atom abstractions, these dominant bond fissions have the highest impact on the overall reactivity among the investigated reactions. Due to the comprehensive amount of available literature for anisole, it is included as a benchmark molecule. The available literature on phenetole is limited, and the present study provides fundamental data for this species. For methylanisole, a recent publication focused on experimental and modeling efforts for these isomers. The importance of the C-O bond breaking, and the other determined reactions in this work were tested by including the calculated rate parameters in a validated chemical kinetic mechanism for methylanisole isomers from literature. The modified model was subsequently assessed in comparison to the initial version of the published model and experiments. Shock tube and rapid compression machine experiments were performed in the temperature range between 880 and 1220 K for pressures of 10 and 20 bar at stoichiometric conditions. This assessment yielded two notable findings. First, it confirmed the significant impact of the C-O bond fission. However, a comparison with recent high-level ab initio calculations revealed significant deviations in the rate constants. Second, it emphasized the importance of the subsequent phenoxy/methylphenoxy radical chemistry and the associated thermodynamic properties. Further refinement of the model descriptions of MAHs is warranted and necessary to improve the understanding of these important reference molecules.
- 4 May 2025
- Published by Elsevier in Combustion and Flame
- Vol. 277
A focus on the first-stage ignition of n-pentane
- 4 May 2025
- Published by Elsevier in Combustion and Flame
- Vol. 277
A focus on the first-stage ignition of n-pentane
- Open Access
- 1 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (18) , 18480-18489
Understanding the Reactivity of N-Heptane Blended with Ethanol or Ethyl Acetate
- 1 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (18) , 18480-18489
Open AccessUnderstanding the Reactivity of N-Heptane Blended with Ethanol or Ethyl Acetate
- 5 April 2025
- Published by Elsevier in Combustion and Flame
- Vol. 276
Combustion kinetics of the e-fuels methyl formate and dimethyl carbonate: A modeling and experimental study
- 5 April 2025
- Published by Elsevier in Combustion and Flame
- Vol. 276
Combustion kinetics of the e-fuels methyl formate and dimethyl carbonate: A modeling and experimental study