KLKeun Hyung Lee

Keun Hyung Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Keun Hyung Lee has a total of 134 co-authors. Here are the top co-authors by number of shared publications:

  • Kihyon Hong

    Department of Materials Science and Engineering

    22 shared publications
  • Kyung Gook Cho

    Department of Chemistry and Chemical Engineering Education and Research Center for Smart Energy and Materials Inha University Incheon Korea

    20 shared publications
  • Min Su Kim

    Department of Chemistry and Chemical Engineering Education and Research Center For Smart Energy and Materials Inha University Incheon Republic of Korea

    14 shared publications
  • Seonjeong Lee

    Department of Materials Science and Engineering, Chungnam National University (CNU), Daejeon 34134, Republic of Korea

    9 shared publications
  • Han Ju Lee

    Department of Materials Science and Engineering, Chungnam National University, Daejeon, 34134, Republic of Korea

    7 shared publications
  • Dong Hyun Park

    Department of Chemistry and Chemical Engineering, Education and Research Center for Smart Energy and Materials, Inha University, Incheon, Republic of Korea

    6 shared publications

Latest Publications

  • Open Access

    Single‐Polymer Multi‐Valued Logic Enabled by Sequential Electrostatic‐to‐Electrochemical Doping

    by Dong Hyun Park, Min Su Kim, Jae Hyun Han, Seung Hyun Baek, Kyu Yeon Kim, Jin‐Kyun Lee, Jiyoul Lee, Keun Hyung Lee

    Multi‐valued logic (MVL) offers a promising approach to overcoming the intrinsic limitations of binary computing by enhancing data density at the device level. However, achieving stable and well‐defined multi‐level logic states within a single semiconductor channel layer remains a significant challenge. In this work, we demonstrate a ternary inverter based on a two‐step doping mechanism in a single polymer semiconductor channel incorporated into an organic electrochemical transistor (OECT). The device exhibits a robust intermediate conduction state characterized by zero‐differential transconductance (ZDT). The face‐on molecular orientation and dense alkyl side‐chain packing initially impede ion penetration, giving rise to surface‐confined electrostatic gating at low gate voltages ( V G ), before transitioning to bulk volumetric electrochemical doping at higher V G . This sequential doping mechanism yields a wide and stable ZDT plateau, an effect that is less pronounced in polymer semiconductors adopting edge‐on orientations or amorphous microstructures. This work highlights the critical role of molecular orientation and side‐chain packing in realizing distinct multi‐level logic states, offering design guidelines for MVL circuits.

  • Open Access

    Dynamic Disulfide Ionogels for Self‐Healing, Transparent, and Elastic E‐Skins

    by Min Su Kim, Dong Hyun Park, Jae Yoon Kim, Hyun Kim, Myungwoong Kim, Kyung Gook Cho, Keun Hyung Lee

    Ionogel E‐skins that combine high elasticity, optical transparency, and autonomous self‐healing are highly desirable yet remain challenging to realize owing to the intricate and interdependent physicochemical interactions between polymer networks and ionic liquids. Here, dynamic covalent ionogels, formed by a disulfide–crosslinked tetra‐arm polyethylene glycol network, were systematically engineered by tuning the identity and composition of ionic liquids. We show that polymer–ionic liquid compatibility, viscosity, and ionic liquid content collectively regulate polymer segmental mobility, which governs disulfide exchange kinetics and thereby dictates healing efficiency and elasticity. The optimized ionogel is fully amorphous and exhibits 99% self‐healing at 25°C within 2 h, a low residual strain of 1.7% after a 100% cyclic tensile test, and 93% optical transmittance at 700 nm. As an ionogel electronic skin, it maintains stable sensing under repeated deformation, recovers its initial functionality after complete damage through self‐healing, and enables reliable real‐time strain sensing of the neck, wrist, finger, and knee. These findings establish chain‐mobility engineering as an effective design principle for robust wearable ionogel electronics.

  • Open Access

    Selective Polarity Control of Metal Oxide Semiconductors for Complementary Logic Gates

    by Dong Hyun Park, Seung Ho Ryu, Min Su Kim, Taek‐Mo Chung, Seong Keun Kim, In‐Hwan Baek, Keun Hyung Lee

    Realizing tunable charge carrier polarity is essential for programmable complementary logic circuits. While two‐dimensional (2D) semiconductors have demonstrated polarity controllability through Schottky barrier modulation or contact engineering, their high interfacial sensitivity limits scalability and integration. Here, we present a robust polarity‐conversion strategy for tin oxide (SnO) semiconductors based on electrolyte‐gated transistors (EGTs). In situ electrochemical doping enables the conversion of p‐type SnO to n‐type SnO 2 via Sn 2+ to Sn 4+ oxidation. Both p‐ and n‐type EGTs exhibit outstanding electrical characteristics, including low‐voltage operation, high ON/OFF current ratios, sharp switching behavior, and reliable long‐term stability. Furthermore, we demonstrate the monolithic integration of complementary logic gates, including inverter, NAND, and NOR gates, through spatially selective electrochemical doping of a single SnO layer. Overall, this work provides a scalable and versatile pathway toward oxide‐based programmable complementary circuits.

  • Open Access

    Stretchable, self-healable, and adhesive ionogels formed via dual association of complex copolymers

    by Hyeonji Lee, Min Su Kim, Minha Lee, Seungjun Kim, Keun Hyung Lee, Myungwoong Kim

    We report the fabrication of freestanding, stretchable, highly adhesive, ionically conductive, and self-healable ionogels consisting of an ionic liquid (IL) and two types of copolymers bearing hydrogen bonding acceptor and donor units: (i) poly[tert-butyl styrene-b-(4-hydroxystyrene-r-methyl acrylate)-b-tert-butyl styrene], and (ii) poly(2-vinyl pyridine-r-methyl acrylate). These copolymers yield an associative ionogel by forming micelles via IL-phobic interactions, and the micelles interact through hydrogen bonding between corona blocks, bridging by stretched block copolymer chains, or hydrogen bonding between the corona block and the additional pyridine-bearing copolymer chains. By tuning the molecular weights and compositions, we fabricated freestanding ionogels exhibiting outstanding mechanical properties, including a strain at break of ≈1000%, toughness of ≈3000 kJ m−3, and Young's modulus of ≈300 kPa, along with an ionic conductivity of ≈0.5 mS cm−1. The ionogel adheres strongly to various substrates—such as plastics, elastomers, glass, and metals—with a maximum adhesion stress of ≈1300 kPa under ambient conditions. It remains adhesive even in water and demonstrates a self-healing efficiency greater than 95%. When applied as a strain sensor, the ionogel exhibits a highly linear and reversible strain–resistance response, with a gauge factor of 1.9 over a strain range of 10–100%, showing negligible hysteresis, rapid recovery, and stable performance under cyclic loading. The sensor also demonstrates exceptional self-healing capability and long-term durability, fully restoring its electrical response after complete severing and maintaining consistent signal output under 50% strain for over 20 000 s, confirming its suitability for reliable soft sensing applications.


  • Open Access

    Sub-1V, flexible, all-polymer complementary logic circuits based on electrolyte-gated transistors

    by Su Jung Kim, Dong Hyun Park, Yu Na Lee, Min Su Kim, Kihyon Hong, Kyung Gook Cho, C. Daniel Frisbie, Keun Hyung Lee


  • Open Access

    Regiorandom Polythiophenes for Fully Stretchable Electrochemical Transistors and Logic Circuits

    by Dong Hyun Park, Min Su Kim, Kyu Yeon Kim, Jae Hyun Han, Moon Sung Kang, Kyung Gook Cho, Keun Hyung Lee

    Regiorandom (RRa) polythiophenes have long been considered unsuitable for highperformance electronics owing to their poor molecular ordering and limited carrier transport. In this study, we demonstrate that RRa polythiophenes, when employed in organic electrochemical transistors (OECTs), exhibit unexpectedly efficient charge transport enabled by volumetric electrochemical doping. Among various alkyl side chains, RRa‐poly(3‐decylthiophene) (P3DT, C10) offers the optimal OECT performance, achieving an on‐state current of ≈160 µA in the saturation regime and an on/off ratio of ≈10 4 , which significantly surpasses the typical performance of disordered polymers. Remarkably, RRa‐P3DT maintains electrical characteristics under large strains of up to 200%, owing to its irregular structure. Fully stretchable OECTs were fabricated by integrating RRa‐P3DT with a single‐walled carbon nanotube (SWCNT) gate electrode and an ionogel electrolyte, retaining stable switching characteristics under 100% strain and occupying the upper‐right corner of the on/off ratio–stretchability plot, thereby outperforming most reported intrinsically stretchable OECTs. Moreover, the successful demonstration of stretchable logic gates including inverters, NAND, and NOR highlights the untapped potential of amorphous polymer semiconductors for stretchable electronics.


  • Field-Programmable Bimodal Switching in a Hybrid-Dual-Gated MoS2 Transistor

    by Jaeeun Kwon, Hanbin Cho, Kyungmin Ko, Hoon Kim, Seonguk Yang, Jeongin Yeo, Keun Hyung Lee, Han-Hee Cho, Joonki Suh

    The ultrahigh surface-to-volume ratio and expandable interlayer spacing of van der Waals solids allow their channel bodies to strongly and dynamically interact with foreign molecules. However, controlling such multiple molecular interactions within a single, integrated platform has remained a technical challenge. Herein, we introduce a so-called hybrid-dual-gated voltage-controlled bimodal switch demonstrated on a single MoS2 transistor by cointegrating high-k solid and ionic liquid electrolytes as dual-gate dielectrics. Upon applying the synchronized dual-gate voltages, it results in two distinctive yet interchangeable switching modes: electrostatic near-Boltzmann-limit switching and intercalation-driven metal-insulator transitions. In addition to the improved field-effect switching performances (Ion/Ioff ∼ 109, SSmin ∼ 61 mV/dec) in the low-gate voltage (VG) regime, the steep-slope metal-insulator transitions accompanying 2H-to-1T structural alternations can also be achieved in the high-VG regime. By incorporating conformal electrode passivation and independent dual-gating modulation, the proposed device platform enables highly stable, field-tunable bimodal switching behaviors through broad-range host-guest interactions.


  • Open Access

    Enhanced Thermoelectric Performance of PVA-Based Ionogels: Tailoring Crystallinity via Additives for Advanced Waste Heat Recovery

    by Ling-Chieh Lee, Shao-Huan Hong, Min-Su Kim, U-Ser Jeng, Chia-Hsin Wang, Shih-Huang Tung, Keun Hyung Lee, Cheng-Liang Liu

    Converting low-grade waste heat into electricity is crucial for green energy. This study introduces an innovative approach using poly(vinyl alcohol) (PVA)-based ionogels incorporating 1-ethyl-3-methylimidazolium dicyanamide ([EMIM][DCA]) and specific additives: 2-carboxyphenylacetic acid (H), 2-sulfobenzoic acid (S), and 2-carboxyphenyl phosphate (P)). These additives enable successful tailoring of the crystallinity, leading to a substantial increase in the ionic figure-of-merit (zTi), from 0.006 for the PVA ionogel to 0.27 for the ionogel with P additives. Furthermore, the P-additive ionogels exhibit excellent mechanical properties, with a tensile stress of 1.75 MPa and a strain of 460%. A four-pair ionic thermoelectric capacitor made from these ionogels generates 0.33 V and achieves a power output of 2.4 mW m-2. This advancement significantly improves the thermoelectric performance of PVA ionogels, aiding in efficient waste heat utilization and sustainable energy development.


  • Band Filling, Electrochemical Reaction, and Re-Entrant Insulating Behavior in Electrolyte-Gated BBL Polymer Semiconductor Films

    by Kyung Gook Cho, Su Jung Kim, Dong Hyun Park, Min Su Kim, Kihyon Hong, Keun Hyung Lee, C. Daniel Frisbie

    Electrochemical doping of the n-type polymer poly(benzimidazobenzophenanthroline) (BBL) in contact with ionic liquids reveals a peak in the drain current (ID) vs gate voltage (VG) behavior, i.e., conductivity versus electron density. The conductivity peak is related to simultaneously acquired gate current-gate voltage (IG-VG) charging curves that are integrated to yield total charge accumulation. The IG-VG traces reveal three separate redox events upon charging BBL that can be correlated with the ID-VG behavior. We assign the first broad IG-VG peak to accumulation of mobile electrons in the BBL LUMO and an increase in ID. Two subsequent sharp IG-VG peaks correspond to electrochemical transformation of BBL to a polymer salt with 2:1 and 1:1 repeat unit-to-cation stoichiometries, respectively. Salt formation correlates with conductivity collapse at high VG; the 1:1 salt phase is insulating. Ex situ grazing incidence wide-angle X-ray scattering (GIWAXS) indicates an initial 5% contraction of the lamellar spacing upon doping with subsequent retention of lamellar (para)crystalline order for repeated doping cycles. Overall, our results reveal a complex interplay between band filling and electrochemical reaction in the transport behavior of electrochemically doped BBL films and provide additional evidence of nonmonotonic conductivity versus charge behavior that appears to be general in polymer semiconductor films.


  • Redox‐Enhanced Ionogels for Stretchable High‐Energy Density Electrochemical Capacitors

    by Min Su Kim, Incheol Heo, Min Seok Kang, Bo Geun Jeon, Kyung Gook Cho, Won Cheol Yoo, Keun Hyung Lee

    Developing stretchable energy storage devices with high energy and power densities poses a significant challenge for future wearable/deformable electronics. This study proposes new redox (R)‐ionogels that incorporate organodisulfides as redox species for high‐energy, stretchable redox‐enhanced solid‐state electrochemical capacitors (R‐SECs). The R‐SECs are prepared using R‐ionogels made from tetraethylthiuram disulfide (TETDS), 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMI][TFSI]), and a physically crosslinked polymer network (poly(vinylidene fluoride‐co‐hexafluoropropylene), P(VDF‐HFP)), sandwiched between two carbonaceous electrodes. Cyclic voltammetry and galvanostatic charge/discharge characteristics of the R‐SECs demonstrated both effective redox reactions and non‐faradaic capacitive energy storage. The optimized 0.25 M TETDS R‐ionogel achieved a specific capacitance of 405 F g‒1, 83% rate retention, 80% cyclic stability after 2000 cycles, an energy density of 117 Wh kg‒1, and a power density of 5.9 kW kg‒1. Additionally, the 0.25 M TETDS enhanced the mechanical properties of the ionogel, increasing the strain at break from 1.92 to 3.25 and toughness from 0.38 to 1.35 MJ m⁻3. Finally, stretchable R‐SECs possessing excellent stretching/releasing durability at 100% strain and volumetric energy densities 26.3 mWh cm−3 that surpass the upper bound of the Ragone plot for reported stretchable capacitors are successfully fabricated for the first time.