Emre Guler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Emre Guler has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
M. Güler
11 shared publications- Melek Guler
Department of Physics Ankara Hacı Bayram Veli University Ankara Turkey
10 shared publications - Gokay Ugur
Department of Physics Gazi University Ankara Turkey
8 shared publications - Şule Uğur
Department of Physics Gazi University Ankara Turkey
8 shared publications G. Uğur
7 shared publicationsŞ. Uğur
7 shared publications
Latest Publications
- 10 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
Experimental production and molecular dynamics analysis of the temperature-dependent elastic, mechanical and anisotropic behavior of the quinary 25Co–25Cu–25Fe–20Ni–5Al high entropy alloy
Following the experimental production of the 25Co–25Cu–25Fe–20Ni–5Al quinary high-entropy alloy (HEA), we present a comprehensive molecular dynamics (MD) investigation of its temperature-dependent elastic, mechanical and anisotropic behavior. Combining theoretical analysis with MD simulations over the 0–1500[Formula: see text]K temperature range, we report the elastic stiffness constants, along with the bulk (B), shear (G) and Young’s moduli (E), Poisson’s ratio ([Formula: see text]) and additional mechanical descriptors, such as experimental and theoretical Vickers microhardness ([Formula: see text]). Notably, the theoretical [Formula: see text] of 1.18[Formula: see text]GPa agrees well with the room-temperature experimental value of [Formula: see text][Formula: see text]GPa, validating the currently adopted computational approach. The cubic elastic stiffness constants (C[Formula: see text], C[Formula: see text] and C[Formula: see text]), B, G and E and the [Formula: see text] of the alloy decrease with increasing temperature and then level off above about 900[Formula: see text]K, with all residual variations remaining below 2%, while the Born mechanical stability conditions remain satisfied throughout. The B/G ratio of 2.3 for the alloy suggests a continuous ductile character, and Poisson’s ratio remains unchanged around 0.31. The universal elastic anisotropy ([Formula: see text]) of the alloy remains pronounced throughout: it rises slightly up to 300[Formula: see text]K, then decreases steadily, falling by about 18% between 300 and 1500[Formula: see text]K, so the alloy becomes progressively less anisotropic at elevated temperatures. Finally, the incorporation of 5 atomic percent (at.%) Al into the Co–Cu–Fe–Ni base raises the configurational entropy to 12.57[Formula: see text]J/mol[Formula: see text]K, reinforcing the stability of the single-phase face-centered cubic (FCC) solid solution.
- 10 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
Experimental production and molecular dynamics analysis of the temperature-dependent elastic, mechanical and anisotropic behavior of the quinary 25Co–25Cu–25Fe–20Ni–5Al high entropy alloy
Following the experimental production of the 25Co–25Cu–25Fe–20Ni–5Al quinary high-entropy alloy (HEA), we present a comprehensive molecular dynamics (MD) investigation of its temperature-dependent elastic, mechanical and anisotropic behavior. Combining theoretical analysis with MD simulations over the 0–1500[Formula: see text]K temperature range, we report the elastic stiffness constants, along with the bulk (B), shear (G) and Young’s moduli (E), Poisson’s ratio ([Formula: see text]) and additional mechanical descriptors, such as experimental and theoretical Vickers microhardness ([Formula: see text]). Notably, the theoretical [Formula: see text] of 1.18[Formula: see text]GPa agrees well with the room-temperature experimental value of [Formula: see text][Formula: see text]GPa, validating the currently adopted computational approach. The cubic elastic stiffness constants (C[Formula: see text], C[Formula: see text] and C[Formula: see text]), B, G and E and the [Formula: see text] of the alloy decrease with increasing temperature and then level off above about 900[Formula: see text]K, with all residual variations remaining below 2%, while the Born mechanical stability conditions remain satisfied throughout. The B/G ratio of 2.3 for the alloy suggests a continuous ductile character, and Poisson’s ratio remains unchanged around 0.31. The universal elastic anisotropy ([Formula: see text]) of the alloy remains pronounced throughout: it rises slightly up to 300[Formula: see text]K, then decreases steadily, falling by about 18% between 300 and 1500[Formula: see text]K, so the alloy becomes progressively less anisotropic at elevated temperatures. Finally, the incorporation of 5 atomic percent (at.%) Al into the Co–Cu–Fe–Ni base raises the configurational entropy to 12.57[Formula: see text]J/mol[Formula: see text]K, reinforcing the stability of the single-phase face-centered cubic (FCC) solid solution.
- 24 July 2026
- Published by Wiley in Annalen der Physik
- Vol. 538 (7) , e70259
Unveiling the Multifunctional Potential of 2D In 2 X 2 (X = S, Se, and Te) Monolayers: A First‐Principles Exploration of Electronic, Optical, Elastic, and Mechanical Anisotropy
Two‐dimensional (2D) In 2 S 2 , In 2 Se 2 , and In 2 Te 2 monolayers were systematically investigated using density functional theory (DFT) calculations. Electronic structure calculations reveal indirect band gaps of 2.55 eV for In 2 S 2 , 2.44 eV for In 2 Se 2 , and 2.22 eV for In 2 Te 2 , demonstrating a systematic narrowing along the S→Se→Te sequence. Further, work functions decrease correspondingly from 6.334 to 6.047 to 5.575 eV across the S→Se→Te series. Optical analysis up to 15 eV reveals that In 2 Te 2 exhibits maximum reflectivity exceeding 0.35 at ∼4 eV, the highest refractive index (n ≈ 2.5), and the strongest plasmon‐loss peak at ∼9.5 eV, whereas In 2 S 2 achieves a maximum absorption peak at 6 eV with minimal optical losses. Elastic stiffness constants were found to decrease across the S→Se→Te order with corresponding Young's moduli of 61.90, 54.84, and 47.24 N/m, respectively. Pugh ratios of 1.61, 1.76, and 1.88, combined with Poisson's ratios of 0.23, 0.27, and 0.30, signify the brittle character of In 2 S 2, while In 2 Se 2 and In 2 Te 2 exhibit ductile behavior. In 2 S 2 , In 2 Se 2 , and In 2 Te 2 exhibit in‐plane mechanical isotropy arising from their hexagonal symmetry, confirming their suitability for flexible electronics and omnidirectional sensing applications.
- 24 July 2026
- Published by Wiley in Annalen der Physik
- Vol. 538 (7) , e70259
Unveiling the Multifunctional Potential of 2D In 2 X 2 (X = S, Se, and Te) Monolayers: A First‐Principles Exploration of Electronic, Optical, Elastic, and Mechanical Anisotropy
Two‐dimensional (2D) In 2 S 2 , In 2 Se 2 , and In 2 Te 2 monolayers were systematically investigated using density functional theory (DFT) calculations. Electronic structure calculations reveal indirect band gaps of 2.55 eV for In 2 S 2 , 2.44 eV for In 2 Se 2 , and 2.22 eV for In 2 Te 2 , demonstrating a systematic narrowing along the S→Se→Te sequence. Further, work functions decrease correspondingly from 6.334 to 6.047 to 5.575 eV across the S→Se→Te series. Optical analysis up to 15 eV reveals that In 2 Te 2 exhibits maximum reflectivity exceeding 0.35 at ∼4 eV, the highest refractive index (n ≈ 2.5), and the strongest plasmon‐loss peak at ∼9.5 eV, whereas In 2 S 2 achieves a maximum absorption peak at 6 eV with minimal optical losses. Elastic stiffness constants were found to decrease across the S→Se→Te order with corresponding Young's moduli of 61.90, 54.84, and 47.24 N/m, respectively. Pugh ratios of 1.61, 1.76, and 1.88, combined with Poisson's ratios of 0.23, 0.27, and 0.30, signify the brittle character of In 2 S 2, while In 2 Se 2 and In 2 Te 2 exhibit ductile behavior. In 2 S 2 , In 2 Se 2 , and In 2 Te 2 exhibit in‐plane mechanical isotropy arising from their hexagonal symmetry, confirming their suitability for flexible electronics and omnidirectional sensing applications.
- 23 July 2026
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 49 (3) , 149
A theoretical investigation of the temperature-dependent elastic, mechanical, and thermodynamic behavior of Ta–10%W, Ta–30%W and Ta–50%W alloys
- 23 July 2026
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 49 (3) , 149
A theoretical investigation of the temperature-dependent elastic, mechanical, and thermodynamic behavior of Ta–10%W, Ta–30%W and Ta–50%W alloys
- 1 November 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 36 (6) , 3191-3206
Multifunctional Properties of 2D Graphitic Carbon Nitride: A Comprehensive First-Principles Study
- 1 November 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 36 (6) , 3191-3206
Multifunctional Properties of 2D Graphitic Carbon Nitride: A Comprehensive First-Principles Study
- 3 August 2025
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (1)
Density Functional Theory Analyses for the Pressure‐Dependent Electronic, Optical, Phonon, Elastic, Mechanical, and Anisotropic Features of Be 2 PN 3
Density functional theory (DFT) calculations are used to investigate the pressure‐dependent electronic, optical, phonon, elastic, mechanical, and anisotropic properties of Be 2 PN 3 , a super‐incompressible nitride with outstanding mechanical resilience up to 400 GPa. The structural composition of Be 2 PN 3 , inspired by wurtzite‐type nitrides, contributes to its remarkable hardness and chemical stability, making it a potential candidate for extreme‐environment applications. The electronic bandgap decreases systematically under increasing pressure through computational analysis, transitioning the material from strong insulating behavior at ambient conditions to semiconducting and potentially metallic characteristics at high pressures. Optical absorption, reflectivity, loss function, and dielectric responses demonstrate pronounced pressure‐induced modifications, highlighting the material's adaptability in optoelectronic applications. The elastic properties, including bulk modulus, shear modulus, and Young's modulus, increase under pressure, reinforcing the material's stiffness. Moreover, the Pugh and Poisson ratios indicate a transition from brittle to ductile behavior with increasing compression, which is crucial for mechanical applications. Elastic anisotropy calculations reveal enhanced directional dependence under pressure, further influencing the mechanical and optical performance of Be 2 PN 3 . These findings provide a comprehensive understanding of the high‐pressure behavior of Be 2 PN 3 , paving the way for its potential utilization in advanced technological applications requiring superior mechanical and electronic properties.
- 3 August 2025
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (1)
Density Functional Theory Analyses for the Pressure‐Dependent Electronic, Optical, Phonon, Elastic, Mechanical, and Anisotropic Features of Be 2 PN 3
Density functional theory (DFT) calculations are used to investigate the pressure‐dependent electronic, optical, phonon, elastic, mechanical, and anisotropic properties of Be 2 PN 3 , a super‐incompressible nitride with outstanding mechanical resilience up to 400 GPa. The structural composition of Be 2 PN 3 , inspired by wurtzite‐type nitrides, contributes to its remarkable hardness and chemical stability, making it a potential candidate for extreme‐environment applications. The electronic bandgap decreases systematically under increasing pressure through computational analysis, transitioning the material from strong insulating behavior at ambient conditions to semiconducting and potentially metallic characteristics at high pressures. Optical absorption, reflectivity, loss function, and dielectric responses demonstrate pronounced pressure‐induced modifications, highlighting the material's adaptability in optoelectronic applications. The elastic properties, including bulk modulus, shear modulus, and Young's modulus, increase under pressure, reinforcing the material's stiffness. Moreover, the Pugh and Poisson ratios indicate a transition from brittle to ductile behavior with increasing compression, which is crucial for mechanical applications. Elastic anisotropy calculations reveal enhanced directional dependence under pressure, further influencing the mechanical and optical performance of Be 2 PN 3 . These findings provide a comprehensive understanding of the high‐pressure behavior of Be 2 PN 3 , paving the way for its potential utilization in advanced technological applications requiring superior mechanical and electronic properties.
- 15 July 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (23)
Molecular dynamics insights into the elastic and anisotropic behavior of the CoCuFeNi alloy
The remarkable arrangement of high-entropy alloys, such as CoCuFeNi, creates an interesting research domain, driven by their superior mechanical and physical characteristics. Thus, this work addresses temperature-dependent elastic, mechanical and anisotropic characteristics of the CoCuFeNi alloy, derived from molecular dynamics (MD) calculations. The elastic stiffness constants, as well as the bulk, shear and Young’s moduli, Poisson’s ratio, and additional mechanical properties, such as hardness and ductility, were also reported through a combination of theoretical analysis and MD simulations between 0[ ]and 1000 K. The usual cubic elastic stiffness constants, with bulk, shear and Young’s moduli, as well as the hardness of the alloy, were observed to decrease with rising temperature and confirm the Born mechanical stability conditions. However, a clear increase in the alloy’s B/G ratio is observed at elevated temperatures, indicating its persistent ductile character. The findings suggest that the Poisson’s ratio of the CoCuFeNi alloy remains stable, while significant elastic anisotropy evolves in a complex manner with increasing temperature.
- 15 July 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (23)
Molecular dynamics insights into the elastic and anisotropic behavior of the CoCuFeNi alloy
The remarkable arrangement of high-entropy alloys, such as CoCuFeNi, creates an interesting research domain, driven by their superior mechanical and physical characteristics. Thus, this work addresses temperature-dependent elastic, mechanical and anisotropic characteristics of the CoCuFeNi alloy, derived from molecular dynamics (MD) calculations. The elastic stiffness constants, as well as the bulk, shear and Young’s moduli, Poisson’s ratio, and additional mechanical properties, such as hardness and ductility, were also reported through a combination of theoretical analysis and MD simulations between 0[ ]and 1000 K. The usual cubic elastic stiffness constants, with bulk, shear and Young’s moduli, as well as the hardness of the alloy, were observed to decrease with rising temperature and confirm the Born mechanical stability conditions. However, a clear increase in the alloy’s B/G ratio is observed at elevated temperatures, indicating its persistent ductile character. The findings suggest that the Poisson’s ratio of the CoCuFeNi alloy remains stable, while significant elastic anisotropy evolves in a complex manner with increasing temperature.
- 7 October 2024
- Published by Springer Nature in JOM
- Vol. 77 (5) , 3472-3481
Theoretical Predictions for Elastic, Mechanical, Anisotropic, Electronic, and Optical Profiles of Wurtzite CdS, CdSe, and CdTe
- 7 October 2024
- Published by Springer Nature in JOM
- Vol. 77 (5) , 3472-3481
Theoretical Predictions for Elastic, Mechanical, Anisotropic, Electronic, and Optical Profiles of Wurtzite CdS, CdSe, and CdTe
- Open Access
- 2 May 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (5) , 1-11
Molecular dynamics exploration of the temperature-dependent elastic, mechanical, and anisotropic properties of hcp ruthenium
Molecular dynamics calculations were performed for the hitherto unclarified temperature-dependent elastic, mechanical, and anisotropic properties of the hexagonal closed pack (hcp) ruthenium (Ru) between 0 and 1200 K. All elastic stiffness constants were found to decrease with increasing temperature. Under the examined temperature range, hcp Ru obeys Born stability conditions. Further, both Pugh ratio analyses and calculated Poisson ratio values mutually suggest the brittle character of hcp Ru between 0 and 1200 K. The intricate hardness behavior of hcp Ru was also obtained and discussed throughout the work. For the considered temperature range, hcp Ru exhibits apparent elastic anisotropy that exponentially increases with increasing temperature. Moreover, presently obtained ground state (T = 0 K and P = 0 GPa) theoretical data for hcp Ru agree well with the former experimental and theoretical data. The present findings on the temperature-dependent characteristics of this metal may further inspire future applied works. Graphical abstract
- 2 May 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (5) , 1-11
Open AccessMolecular dynamics exploration of the temperature-dependent elastic, mechanical, and anisotropic properties of hcp ruthenium
Molecular dynamics calculations were performed for the hitherto unclarified temperature-dependent elastic, mechanical, and anisotropic properties of the hexagonal closed pack (hcp) ruthenium (Ru) between 0 and 1200 K. All elastic stiffness constants were found to decrease with increasing temperature. Under the examined temperature range, hcp Ru obeys Born stability conditions. Further, both Pugh ratio analyses and calculated Poisson ratio values mutually suggest the brittle character of hcp Ru between 0 and 1200 K. The intricate hardness behavior of hcp Ru was also obtained and discussed throughout the work. For the considered temperature range, hcp Ru exhibits apparent elastic anisotropy that exponentially increases with increasing temperature. Moreover, presently obtained ground state (T = 0 K and P = 0 GPa) theoretical data for hcp Ru agree well with the former experimental and theoretical data. The present findings on the temperature-dependent characteristics of this metal may further inspire future applied works. Graphical abstract
- 5 September 2023
- Published by Springer Nature in MRS Communications
- Vol. 13 (6) , 1320-1325
DFT predictions of the electronic, phonon, optical, and thermoelectric characteristics of CaCu2S2
- 5 September 2023
- Published by Springer Nature in MRS Communications
- Vol. 13 (6) , 1320-1325
DFT predictions of the electronic, phonon, optical, and thermoelectric characteristics of CaCu2S2