JLJung-Hoon Lee

Jung-Hoon Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jung-Hoon Lee has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • p-Type oxide semiconductors for 3D integration: challenges and the role of atomic layer deposition

    by Juwon Kim, Seunghoon Lee, Gi-Beom Park, Bo Keun Park, Jung-Hoon Lee, Jin-Seong Park

    ALD-enabled p-type oxide semiconductors provide a pathway toward high-performance and reliable CFET and monolithic 3D integration by overcoming the process sensitivity and structural limitations of conventional PVD approaches.

  • Mechanical scratch activation of ALD-grown SnO2 thin films enabling ultralow-noise NO2 gas sensing

    by Minhyeok An, Jiyeon Shin, Sol-Hee Jo, Sunyoung Shin, Bo Keun Park, Baek Song, Young-Seok Shim, Donghwi Cho, Jung-Hoon Lee, Jeong-O. Lee

  • Open Access

    Mechanical Scratch Activation of ALD-Grown SnO2 Thin Films Enabling Ultralow-Noise NO2 Gas Sensing

    by Minhyeok An, Jiyeon Shin, Sol-Hee Jo, Sun Young Shin, Bo Keun Park, Donghwi Cho, Jung-Hoon Lee, Jeong-O Lee

    Atomic layer deposited (ALD) SnO2 thin films offer excellent uniformity and process controllability for NO2 gas sensors; however, their sensing performance at low concentrations is often limited by insufficient surface activation and unstable electrical transport, resulting in elevated baseline noise. Here, we introduce a simple mechanical scratch-activation strategy that simultaneously enhances surface reactivity and suppresses electrical noise by stabilizing electrical transport in ALD-grown SnO2 thin-film sensors. Increasing the deposition temperature improves crystallinity and promotes a preferred (110) orientation, which is intrinsically favorable for NO2 adsorption. Controlled surface scratching introduces localized mechanical disorder without disrupting film continuity. Structural and chemical analyses reveal that scratching redistributes surface oxygen species, increases oxygen-vacancy-related donor states, and generates locally electroactive sites that suppress electrical noise while promoting efficient charge transfer with NO2. As a result, the scratch-activated SnO2 film deposited at 200°C achieves an optimal balance between crystallinity and defect density, leading to a marked enhancement in sensing response and a reduction in the detection limit from 1.3 ppm to 80 ppb, while maintaining high NO2 selectivity and long-term stability. This work demonstrates a practical and scalable strategy for overcoming the sensitivity-noise trade-off in ALD-based chemical sensors.

  • Area-Selective Atomic Layer Deposition of Ru Using Phenyl Silane Inhibitors: Comparison between Amino and Methoxy Head Groups

    by Jae Hun Hwang, Jee-Eun Choi, Eun Chong Cho, Ji Woon Choi, Sojung Yoo, Jung-Hoon Lee, Taeyong Eom, Myung-Gil Kim, Gun Hwan Kim, Won Bo Lee, et al.

  • Open Access

    Synthesis of a tin compound bearing N-alkoxy carboxamide and methyl ligands as a precursor for SnO2 fabrication via atomic layer deposition

    by Sol-Hee Jo, Sunyoung Shin, Minhyeok An, Youngkwon Kim, Donghwi Cho, Jeong-O Lee, Ji Yeon Ryu, Bo Keun Park, Chang Gyoun Kim, Jin-Seong Park, et al.


  • Top Cited Papers

    Non-epitaxial single-crystal 2D material growth by geometric confinement

    by Ki Seok Kim, Doyoon Lee, Celesta S. Chang, Seunghwan Seo, Yaoqiao Hu, Soonyoung Cha, Hyunseok Kim, Jiho Shin, Ju-Hee Lee, Sangho Lee, et al.

    Two-dimensional (2D) materials and their heterostructures show a promising path for next-generation electronics1,2,3. Nevertheless, 2D-based electronics have not been commercialized, owing mainly to three critical challenges: i) precise kinetic control of layer-by-layer 2D material growth, ii) maintaining a single domain during the growth, and iii) wafer-scale controllability of layer numbers and crystallinity. Here we introduce a deterministic, confined-growth technique that can tackle these three issues simultaneously, thus obtaining wafer-scale single-domain 2D monolayer arrays and their heterostructures on arbitrary substrates. We geometrically confine the growth of the first set of nuclei by defining a selective growth area via patterning SiO2 masks on two-inch substrates. Owing to substantial reduction of the growth duration at the micrometre-scale SiO2 trenches, we obtain wafer-scale single-domain monolayer WSe2 arrays on the arbitrary substrates by filling the trenches via short growth of the first set of nuclei, before the second set of nuclei is introduced, thus without requiring epitaxial seeding. Further growth of transition metal dichalcogenides with the same principle yields the formation of single-domain MoS2/WSe2 heterostructures. Our achievement will lay a strong foundation for 2D materials to fit into industrial settings.


  • Open Access

    Air-stable alucone thin films deposited by molecular layer deposition using a 4-mercaptophenol organic reactant

    by GeonHo Baek, Seunghwan Lee, Jung-Hoon Lee, Jin-Seong Park

    Molecular layer deposition (MLD) is a thin film technique to make a pure organic coating or hybrid organic–inorganic film, sequentially dosing organic–organic or organic–inorganic precursors, respectively. In this study, hybrid organic–inorganic alucone films were fabricated via MLD using 4-mercaptophenol and trimethylaluminum as organic and metal precursors, respectively, over the deposition temperature range of 100–200 °C. The fabricated film was very stable without degradation when exposed to the atmosphere, and the characteristic change was confirmed through annealing under vacuum at 300–750 °C. After annealing, the thickness of the alucone films decreased and the bonding of the carbon ring changed, as revealed by the spectroscopic ellipsometer, Fourier-transform infrared, Raman, x-ray diffraction, and x-ray photoelectron spectroscopy results. The annealed alucone films showed thermal polymerization, and their carbon ring structures transformed into graphitic carbon flakes. The alucone film annealed at 750 °C showed an electrical resistivity of 0.55 Ω cm. Annealed MLD alucone films, which are hybrid materials, are potential candidates for applications in electronic, capacitor, and thermoelectric devices.


  • Recent Progress on Metal Oxide Semiconductor Thin Film Transistor Application via Atomic Layer Deposition Method

    by Jiazhen Sheng, Jung-Hoon Lee, Tae-Hyun Hong, Wan-Ho Choi, Jin-Seong Park

  • Undoped ZnO electrodes for low-cost indoor organic photovoltaics

    by Ji Soo Goo, Jung-Hoon Lee, Sang-Chul Shin, Jin-Seong Park, Jae Won Shim

    The unique features of organic photovoltaics (OPVs) offer great potential for their use as indoor energy harvesters. Here, we demonstrate for the first time the use of a low-cost undoped ZnO film for the transparent conducting electrode (TCE) of OPVs. Atomic layer deposition was employed to produce potentially defect-free and crystalline ZnO films. Poly(3-hexylthiophene) (P3HT):indene-C60 bisadduct (ICBA)-based OPVs with 200 nm-thick ZnO TCEs were shown to hardly operate under 1 sun conditions due to the high sheet resistance (RSH) of the ZnO film (260 Ω sq−1). Surprisingly, the indoor performance of the OPVs was found to be barely dependent on the RSH of the TCEs; rather, other factors such as leakage components associated with the shunt resistance were found to have a greater influence on the performance. The OPVs exhibited excellent indoor performance with a power-conversion efficiency (PCE) of 9.5 ± 0.3% under a light emitting diode lamp with a luminance of 500 lux. The measured PCE was slightly higher than or comparable to that of reference devices with a 200 nm-thick ITO TCE. Finally, the ZnO TCE is expected to result in more than 20% cost reduction of the OPVs when compared with the ITO TCE.


  • Control of phonon transport by the formation of the Al 2 O 3 interlayer in Al 2 O 3 –ZnO superlattice thin films and their in-plane thermoelectric energy generator performance

    by No-Won Park, Jay-Young Ahn, Tae-Hyun Park, Jung-Hun Lee, Won-Yong Lee, Kwanghee Cho, Young-Gui Yoon, Chel-Jong Choi, Jin-Seong Park, Sang-Kwon Lee

    Recently, significant progress has been made in increasing the figure-of-merit (ZT) of various nanostructured materials, including thin-film and quantum dot superlattice structures. Studies have focused on the size reduction and control of the surface or interface of nanostructured materials since these approaches enhance the thermopower and phonon scattering in quantum and superlattice structures. Currently, bismuth–tellurium-based semiconductor materials are widely employed for thermoelectric (TE) devices such as TE energy generators and coolers, in addition to other sensors, for use at temperatures under 400 K. However, new and promising TE materials with enhanced TE performance, including doped zinc oxide (ZnO) multilayer or superlattice thin films, are also required for designing solid-state TE power generating devices with the maximum output power density and for investigating the physics of in-plane TE generators. Herein, we report the growth of Al2O3/ZnO (AO/ZnO) superlattice thin films, which were prepared by atomic layer deposition (ALD), and the evaluation of their electrical and TE properties. All the in-plane TE properties, including the Seebeck coefficient (S), electrical conductivity (σ), and thermal conductivity (κ), of the AO/ZnO superlattice (with a 0.82 nm-thick AO layer) and AO/ZnO films (with a 0.13 nm-thick AO layer) were evaluated in the temperature range 40–300 K, and the measured S, σ, and κ were −62.4 and −17.5 μV K−1, 113 and 847 (Ω cm)−1, and 0.96 and 1.04 W m−1 K−1, respectively, at 300 K. Consequently, the in-plane TE ZT factor of AO/ZnO superlattice films was found to be ∼0.014, which is approximately two times more than that of AO/ZnO films (ZT of ∼0.007) at 300 K. Furthermore, the electrical power generation efficiency of the TE energy generator consisting of four couples of n-AO/ZnO superlattice films and p-Bi0.5Sb1.5Te3 (p-BST) thin-film legs on the substrate was demonstrated. Surprisingly, the output power of the 100 nm-thick n-AO/ZnO superlattice film/p-BST TE energy generator was determined to be ∼1.0 nW at a temperature difference of 80 K, corresponding to a significant improvement of ∼130% and ∼220% compared to the 100 nm-thick AO/ZnO film/p-BST and n-BT/p-BST film generators, respectively, owing to the enhancement of the TE properties, including the power factor of the superlattice film.