Mykola B. Klendii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mykola B. Klendii has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandra Trokhaniak
National University of Life and Environmental Sciences of Ukraine
3 shared publications - Serhii Pylypaka
National University of Life and Environmental Sciences of Ukraine
3 shared publications National University of Life and Environmental Sciences of Ukraine
2 shared publications- Viktor Trokhaniak
National University of Life and Environmental Sciences of Ukraine
2 shared publications - Andrii Pastushenko
Відокремлений підрозділ Національного університету біоресурсів і природокористування України «Бережанський агротехнічний інститут
1 shared publication Berezhan Agricultural Technical Institute is a separate unit of National University of Life and Environmental Sciences of Ukraine
1 shared publication
Latest Publications
- 1 January 2024
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mechanics and automatics of agroindustrial production
- p. 126-137
Research on the power parameters of a conveyor with a bladed working element
Purpose. Elimination of drive failure when overloading the bladed working element during the transportation of bulk material by establishing the influence of conveyor parameters on the torque value. Methods. Theoretical studies were conducted using methods of theoretical mechanics and higher mathematics. During experimental studies on determining the torque on the drive shaft of the conveyor, methods of conducting experiments on modern equipment, methods of planning a multifactor experiment were used. Methods of probability theory, mathematical statistics and regression analysis were used to process the research results, in particular, statistical calculations were carried out according to the program developed by the authors in the STATISTICA environment. Results. The article presents an experimental stand for studying a conveyor with a bladed working element. An analytical dependence was obtained for determining the magnitude of the torque on the drive shaft of a conveyor with a bladed working element. According to the results of experimental studies, the corresponding regression equations and response surfaces were constructed to establish the influence on the magnitude of the torque of the controlled factors: the inner diameter of the pipe D, the conveyor filling factor ψ and the frequency of rotation n of the bladed working element. According to the results of experimental studies, the corresponding regression equation and response surfaces were constructed to establish the influence of the torque during the transportation of wheat grain by controlled factors. In order to determine the adequacy of the theoretical determination of the torque during transportation by a conveyor with a bladed working element, a comparison was made with the obtained experimental data. Conclusions 1. An analytical dependence was obtained to determine the value of the torque on the drive shaft of a conveyor with a bladed working element, from the analysis of which it was established that the torque on the drive shaft of a conveyor with a bladed working element, when transporting grain material, for a conveyor filling coefficient of ψ = 0.5, within the range of the bladed working element rotation frequency n = 200–600 rpm, decreases linearly, while the torque during the transportation of corn varies within T = 28.75–23.94 Nm, which is 16.9 %, during the transportation of peas varies within T = 26.85– 22.66 Nm, which is 15.8 %, during the transportation of wheat varies within T = 24.34–20.574 Nm, which is 15.6 %. 2. A methodology for conducting experimental studies to determine the torque T on the drive shaft of a conveyor with a bladed working element during the transportation of bulk and lumpy materials has been developed. 3. It has been established that the main factors that influence the increase in the torque T are the following factors: x1 – the diameter of the guide pipe D and x2 – the filling coefficient of the conveyor ψ. An increase in the factor x3 – the frequency of rotation of the bladed working element n – leads to a decrease in the torque. 4. When the diameter D changes within 0.06–0.1 m, the torque T increases by 17.9 %, when the conveyor load factor ψ increases from 0.3 to 0.7, the torque T increases by 17.4 %, and when the frequency of rotation of the bladed working body increases within 200–600 rpm, the torque T decreases by 4.9 %. 5. It was established that the error between the results of theoretical and experimental studies is within 4.2–8.6 % Keywords: transportation, grain material, conveyor, blade, speed, conveyor filling factor, torque.
- 1 January 2024
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mechanics and automatics of agroindustrial production
- p. 126-137
Research on the power parameters of a conveyor with a bladed working element
Purpose. Elimination of drive failure when overloading the bladed working element during the transportation of bulk material by establishing the influence of conveyor parameters on the torque value. Methods. Theoretical studies were conducted using methods of theoretical mechanics and higher mathematics. During experimental studies on determining the torque on the drive shaft of the conveyor, methods of conducting experiments on modern equipment, methods of planning a multifactor experiment were used. Methods of probability theory, mathematical statistics and regression analysis were used to process the research results, in particular, statistical calculations were carried out according to the program developed by the authors in the STATISTICA environment. Results. The article presents an experimental stand for studying a conveyor with a bladed working element. An analytical dependence was obtained for determining the magnitude of the torque on the drive shaft of a conveyor with a bladed working element. According to the results of experimental studies, the corresponding regression equations and response surfaces were constructed to establish the influence on the magnitude of the torque of the controlled factors: the inner diameter of the pipe D, the conveyor filling factor ψ and the frequency of rotation n of the bladed working element. According to the results of experimental studies, the corresponding regression equation and response surfaces were constructed to establish the influence of the torque during the transportation of wheat grain by controlled factors. In order to determine the adequacy of the theoretical determination of the torque during transportation by a conveyor with a bladed working element, a comparison was made with the obtained experimental data. Conclusions 1. An analytical dependence was obtained to determine the value of the torque on the drive shaft of a conveyor with a bladed working element, from the analysis of which it was established that the torque on the drive shaft of a conveyor with a bladed working element, when transporting grain material, for a conveyor filling coefficient of ψ = 0.5, within the range of the bladed working element rotation frequency n = 200–600 rpm, decreases linearly, while the torque during the transportation of corn varies within T = 28.75–23.94 Nm, which is 16.9 %, during the transportation of peas varies within T = 26.85– 22.66 Nm, which is 15.8 %, during the transportation of wheat varies within T = 24.34–20.574 Nm, which is 15.6 %. 2. A methodology for conducting experimental studies to determine the torque T on the drive shaft of a conveyor with a bladed working element during the transportation of bulk and lumpy materials has been developed. 3. It has been established that the main factors that influence the increase in the torque T are the following factors: x1 – the diameter of the guide pipe D and x2 – the filling coefficient of the conveyor ψ. An increase in the factor x3 – the frequency of rotation of the bladed working element n – leads to a decrease in the torque. 4. When the diameter D changes within 0.06–0.1 m, the torque T increases by 17.9 %, when the conveyor load factor ψ increases from 0.3 to 0.7, the torque T increases by 17.4 %, and when the frequency of rotation of the bladed working body increases within 200–600 rpm, the torque T decreases by 4.9 %. 5. It was established that the error between the results of theoretical and experimental studies is within 4.2–8.6 % Keywords: transportation, grain material, conveyor, blade, speed, conveyor filling factor, torque.
- Open Access
- 1 January 2021
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 61 (1) , 270-278
EXTERNAL ROLLING OF A POLYGON ON CLOSED CURVILINEAR PROFILE
The design of a helical surface tillage tool made of a developable helicoid section has been calculated using the methods of analytical and differential geometry, the theory of surfaces, the systems of computer-generated graphics and mathematics. A helical tool in the form of a skeleton cylinder made of bars, where there is a helical surface made of arranged sheet metal, has been developed. Such a design prevents a helical surface from becoming clogged with soil. The suggested tool operates as a roller and the soil can easily pass through the gaps between the bars. New helical harrow tools have been designed and made for this experiment. An experimental harrow equipped with helical tools has been made and used to conduct a field research. The research was aimed at determining the optimal kinematic parameters and the pattern of field movement, which allow performing the technological process of soil tillage with the performance indices that meet the agricultural requirements.
- 1 January 2021
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 61 (1) , 270-278
Open AccessEXTERNAL ROLLING OF A POLYGON ON CLOSED CURVILINEAR PROFILE
The design of a helical surface tillage tool made of a developable helicoid section has been calculated using the methods of analytical and differential geometry, the theory of surfaces, the systems of computer-generated graphics and mathematics. A helical tool in the form of a skeleton cylinder made of bars, where there is a helical surface made of arranged sheet metal, has been developed. Such a design prevents a helical surface from becoming clogged with soil. The suggested tool operates as a roller and the soil can easily pass through the gaps between the bars. New helical harrow tools have been designed and made for this experiment. An experimental harrow equipped with helical tools has been made and used to conduct a field research. The research was aimed at determining the optimal kinematic parameters and the pattern of field movement, which allow performing the technological process of soil tillage with the performance indices that meet the agricultural requirements.
- 11 November 2019
- Published by National University of Life and Environmental Sciences of Ukraine in Machinery Energetics
- Vol. 10 (4) , 85-90
Theoretical justification of regulation of borrowing submission for handling holes
Теоретичне обґрунтування регулювання подачі свердління при обробленні наскрізних отворів
- 11 November 2019
- Published by National University of Life and Environmental Sciences of Ukraine in Machinery Energetics
- Vol. 10 (4) , 85-90
Theoretical justification of regulation of borrowing submission for handling holes
Теоретичне обґрунтування регулювання подачі свердління при обробленні наскрізних отворів
- Open Access
- 28 February 2019
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 59 (1) , 67-76
PARTICLE MOTION OVER THE EDGE OF AN INCLINED PLANE THAT PERFORMS AXIAL MOVEMENT IN A VERTICAL LIMITING CYLINDER
Differential equations of a relative material particle motion over the edge of an inclined flat ellipse that rotates around the axis of a vertical limiting cylinder have been deduced. The position of a plane relative to the axis of the rotation is set by the angle ranging from zero to ninety degrees in its value. If the angle is equal to zero, the plane is perpendicular to the axis of rotation and if the angle is equal to ninety degrees, it passes through the axis of rotation. The equations have been solved using numerical methods. Analytical solution has been found for certain angles. The aim of the research is to investigate the transportability of a technological material in a vertical direction by a cascade operating element that rotates in a cylindrical cover. The working part of the operating element is an inclined rigid plane, which is limited by an ellipse — the line of its contact with a cover. The objective of the research is to analytically describe the movement of a single particle of the technological material on two surfaces, namely, an inclined plane and a vertical cover. The research methodology is based on the methods of differential geometry and the theory of surfaces, theoretical mechanics and numerical methods of solving differential equations. The paper presents a first developed analytical description of the relative particle motion in an ellipse — a contact line of an inclined plane and a limiting vertical cylinder, in which the inclined plane rotates. The kinematic characteristics of such motion have been determined.
- 28 February 2019
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 59 (1) , 67-76
Open AccessPARTICLE MOTION OVER THE EDGE OF AN INCLINED PLANE THAT PERFORMS AXIAL MOVEMENT IN A VERTICAL LIMITING CYLINDER
Differential equations of a relative material particle motion over the edge of an inclined flat ellipse that rotates around the axis of a vertical limiting cylinder have been deduced. The position of a plane relative to the axis of the rotation is set by the angle ranging from zero to ninety degrees in its value. If the angle is equal to zero, the plane is perpendicular to the axis of rotation and if the angle is equal to ninety degrees, it passes through the axis of rotation. The equations have been solved using numerical methods. Analytical solution has been found for certain angles. The aim of the research is to investigate the transportability of a technological material in a vertical direction by a cascade operating element that rotates in a cylindrical cover. The working part of the operating element is an inclined rigid plane, which is limited by an ellipse — the line of its contact with a cover. The objective of the research is to analytically describe the movement of a single particle of the technological material on two surfaces, namely, an inclined plane and a vertical cover. The research methodology is based on the methods of differential geometry and the theory of surfaces, theoretical mechanics and numerical methods of solving differential equations. The paper presents a first developed analytical description of the relative particle motion in an ellipse — a contact line of an inclined plane and a limiting vertical cylinder, in which the inclined plane rotates. The kinematic characteristics of such motion have been determined.
- Open Access
- 2 July 2018
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 58 (3) , 201-208
PARTICLE MOTION ON THE SURFACE OF A CONCAVE SOIL-TILLING DISK
Relative particle motion on the internal rough surface of a concave soil-tilling disk, which rotates around horizontal axis under a soil reaction force, has been considered. A disk blade is positioned in a vertical plane, which makes an incidence angle with the direction of the machine movement. This angle has its acceptable limit and when it exceeds the limit, it causes disk dragging. In the paper, it has been assumed that dragging was non-existent, the rotational rate of a disk is stable and it depends on stabilized velocity of the machine movement and on an incidence angle. When a machine is operated, soil particles get onto an internal disk surface and perform a relative motion, which determines the slipping trajectory of a particle on a disk surface. The trajectory of the absolute particle motion relative to a fixed coordinate system allows tracing the rise height of a particle after its gets onto a disk surface. Differential equations of particle motion have been developed and solved using numerical methods. A particle gets onto a disk with specified initial criteria, namely the direction of its entering on a disk and its initial velocity. Two models of particle motion on a disk have been considered. According to the first model, we assume that further particle motion after its getting onto a disk surface is performed due to the kinetic energy of a particle at the moment of its getting onto a disk surface. According to the second model, the backup force of other particles, which breaks the force of particle friction on a surface, is taken into account. Differential equations of particle motion have been developed in projections onto a fixed solid system of axes. Thus, the system includes three differential equations in three unknown functions. One of the unknown functions is the surface reaction force and the dependences, which describe relative particle motion on a disk surface. For the purpose of the quality of soil loosening, we conducted multivariate experiment to determine the area of the soil dissipation. On the basis of field experiments, it has been determined that the production process quality of tillage machine meets agrotechnical requirements.
- 2 July 2018
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 58 (3) , 201-208
Open AccessPARTICLE MOTION ON THE SURFACE OF A CONCAVE SOIL-TILLING DISK
Relative particle motion on the internal rough surface of a concave soil-tilling disk, which rotates around horizontal axis under a soil reaction force, has been considered. A disk blade is positioned in a vertical plane, which makes an incidence angle with the direction of the machine movement. This angle has its acceptable limit and when it exceeds the limit, it causes disk dragging. In the paper, it has been assumed that dragging was non-existent, the rotational rate of a disk is stable and it depends on stabilized velocity of the machine movement and on an incidence angle. When a machine is operated, soil particles get onto an internal disk surface and perform a relative motion, which determines the slipping trajectory of a particle on a disk surface. The trajectory of the absolute particle motion relative to a fixed coordinate system allows tracing the rise height of a particle after its gets onto a disk surface. Differential equations of particle motion have been developed and solved using numerical methods. A particle gets onto a disk with specified initial criteria, namely the direction of its entering on a disk and its initial velocity. Two models of particle motion on a disk have been considered. According to the first model, we assume that further particle motion after its getting onto a disk surface is performed due to the kinetic energy of a particle at the moment of its getting onto a disk surface. According to the second model, the backup force of other particles, which breaks the force of particle friction on a surface, is taken into account. Differential equations of particle motion have been developed in projections onto a fixed solid system of axes. Thus, the system includes three differential equations in three unknown functions. One of the unknown functions is the surface reaction force and the dependences, which describe relative particle motion on a disk surface. For the purpose of the quality of soil loosening, we conducted multivariate experiment to determine the area of the soil dissipation. On the basis of field experiments, it has been determined that the production process quality of tillage machine meets agrotechnical requirements.
- Open Access
- 28 June 2018
- Published by Faculty of Engineering, Chulalongkorn University in Engineering Journal
- Vol. 22 (3) , 83-92
Particle Motion over the Surface of a Cylinder, which Performs Translational Oscillations in a Vertical Plane
- 28 June 2018
- Published by Faculty of Engineering, Chulalongkorn University in Engineering Journal
- Vol. 22 (3) , 83-92
Open AccessParticle Motion over the Surface of a Cylinder, which Performs Translational Oscillations in a Vertical Plane