Martin Thullner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Martin Thullner has a total of 239 co-authors. Here are the top co-authors by number of shared publications:
- Lukas Y. Wick
Helmholtz Centre for Environmental Research - UFZ
20 shared publications Hauke Harms
UFZ - Helmholtz Centre for Environmental Research, Department of Environmental Microbiology, Permoserstraße 15, 04318, Leipzig, Germany
19 shared publicationsFlorian Centler
18 shared publicationsFalk Heße
Institute of Earth and Environmental Sciences‐Geoecology University of Potsdam Potsdam Germany
14 shared publications- Anke Hildebrandt
Department of Computational Hydrosystems, Helmholtz Centre for Environmental Research (UFZ), Leipzig, Germany
12 shared publications Matthias Kästner
UFZ – Helmholtz Centre for Environmental Research, Department of Environmental Biotechnology, Leipzig, Germany
12 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Factors driving varying salinity of a fresh water lens underneath a coastal barrier island
Groundwater is often the only drinking water resource of many small marine islands. The fresh water lenses underneath these islands are highly restricted in their extent and vulnerable to salt water intrusion caused by groundwater extraction or other factors. An example is the barrier island of Langeoog located off the North German coast. The drinking water supply of this island is exclusively provided by groundwater extracted from its fresh water lens. Since several of the drinking water wells exhibit strong salinity variations, a long-term sustainable drinking water management requires knowledge of the factors driving these variations.To identify the reasons for the salinity variations in the drinking water wells on Langeoog, long-term data series on chloride concentrations, groundwater and sea water levels, pumping activity, climate data, soil moisture and dune locations were analyzed for the period of 1993-2023. Measured and from measurements derived data were investigated using time series analysis, multivariant regression and artificial intelligence approaches to determine the relevance of different driving factors for the observed salinity variations and the ability to predict such variations.The results of the study show that individual drinking water wells differ not only in the magnitude of the salinity variations but also regarding the reasons for these variations. In general, the salinity in individual wells is not driven by the present conditions and their short term variability but reflects the response of the groundwater system to factors integrated over periods of several years. Relevant factors include the water balance of the well field (groundwater recharge vs. extraction) as well as the storm flood frequency and the associated variations in the location of barrier dunes. Without detectable influence on salinity are groundwater levels, sea water levels and the operation intensity of individual wells. A limited prediction of the salinity based on the entire set of collected data is possible for selected wells.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFactors driving varying salinity of a fresh water lens underneath a coastal barrier island
Groundwater is often the only drinking water resource of many small marine islands. The fresh water lenses underneath these islands are highly restricted in their extent and vulnerable to salt water intrusion caused by groundwater extraction or other factors. An example is the barrier island of Langeoog located off the North German coast. The drinking water supply of this island is exclusively provided by groundwater extracted from its fresh water lens. Since several of the drinking water wells exhibit strong salinity variations, a long-term sustainable drinking water management requires knowledge of the factors driving these variations.To identify the reasons for the salinity variations in the drinking water wells on Langeoog, long-term data series on chloride concentrations, groundwater and sea water levels, pumping activity, climate data, soil moisture and dune locations were analyzed for the period of 1993-2023. Measured and from measurements derived data were investigated using time series analysis, multivariant regression and artificial intelligence approaches to determine the relevance of different driving factors for the observed salinity variations and the ability to predict such variations.The results of the study show that individual drinking water wells differ not only in the magnitude of the salinity variations but also regarding the reasons for these variations. In general, the salinity in individual wells is not driven by the present conditions and their short term variability but reflects the response of the groundwater system to factors integrated over periods of several years. Relevant factors include the water balance of the well field (groundwater recharge vs. extraction) as well as the storm flood frequency and the associated variations in the location of barrier dunes. Without detectable influence on salinity are groundwater levels, sea water levels and the operation intensity of individual wells. A limited prediction of the salinity based on the entire set of collected data is possible for selected wells.
- Open Access
- 9 October 2025
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 236 (15) , 1-13
Determining Contributions of Three Different Pathways to Total Degradation of a Contaminant Using Data From Triple-Element Isotope Analysis
The analysis of multi-elemental compound-specific stable isotope analysis (CSIA) has been established for the determination of contaminant degradation pathways. For systems with two pathways taking place simultaneously also a quantitative analysis of each pathway’s contribution to total degradation has been introduced using the combined information from the stable isotope fractionation of two elements. Recent experimental approaches also allow for the assessment of stable isotope fractionation of three different elements of a degraded compound, which would provide the opportunity to analyze systems with three simultaneously occurring degradation pathways using stable isotope data. Yet, approaches for a quantitative analysis of such systems are missing. Here we mathematically derive and present an approach to determine the contribution of three different degradation pathways to total degradation of a contaminant compound using the stable isotope fractionation of three different elements in the remaining compound. To verify the accuracy of the computational approach numerical simulations of virtual batch experiments were performed considering the degradation of a compound via three degradation pathways each leading to a stable isotope fractionation of three different elements. Applying the computational approach to the simulated concentration and stable isotope data allowed an exact determination of the contribution of the individual degradation pathways to total contaminant degradation regardless of the considered degradation rates. As application example we apply our approach to experimental data from the literature on the in-situ degradation of 2,4-DNT and the associated stable isotope fractionation of C, H and N. Calculated results of deoxygenation contributing 92%, partial reduction contributing 7% and CH3-group oxidation contributing 1% to total degradation are in agreement with estimates presented in the literature. The new computational approach provides a novel tool for an improved analysis of multi-element CSIA data and for the quantitative assessment of contaminant degradation processes.
- 9 October 2025
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 236 (15) , 1-13
Open AccessDetermining Contributions of Three Different Pathways to Total Degradation of a Contaminant Using Data From Triple-Element Isotope Analysis
The analysis of multi-elemental compound-specific stable isotope analysis (CSIA) has been established for the determination of contaminant degradation pathways. For systems with two pathways taking place simultaneously also a quantitative analysis of each pathway’s contribution to total degradation has been introduced using the combined information from the stable isotope fractionation of two elements. Recent experimental approaches also allow for the assessment of stable isotope fractionation of three different elements of a degraded compound, which would provide the opportunity to analyze systems with three simultaneously occurring degradation pathways using stable isotope data. Yet, approaches for a quantitative analysis of such systems are missing. Here we mathematically derive and present an approach to determine the contribution of three different degradation pathways to total degradation of a contaminant compound using the stable isotope fractionation of three different elements in the remaining compound. To verify the accuracy of the computational approach numerical simulations of virtual batch experiments were performed considering the degradation of a compound via three degradation pathways each leading to a stable isotope fractionation of three different elements. Applying the computational approach to the simulated concentration and stable isotope data allowed an exact determination of the contribution of the individual degradation pathways to total contaminant degradation regardless of the considered degradation rates. As application example we apply our approach to experimental data from the literature on the in-situ degradation of 2,4-DNT and the associated stable isotope fractionation of C, H and N. Calculated results of deoxygenation contributing 92%, partial reduction contributing 7% and CH3-group oxidation contributing 1% to total degradation are in agreement with estimates presented in the literature. The new computational approach provides a novel tool for an improved analysis of multi-element CSIA data and for the quantitative assessment of contaminant degradation processes.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
ThermoOptiPlan: Optimizing Planning and Operation of Geothermal Systems using innovative prediction tools
The use of deep geothermal energy is an important building block in the planned transformation of energy systems. However, the development of new sources, particularly for the pore aquifers in the North German Basin, has not progressed as far as necessary to make a substantial contribution. Decisive obstacles here are, on the one hand, the exploration risk, which essentially results from uncertainties regarding the subsurface properties, as well as larger cost factors that are difficult to calculate during operation, such as scaling effects, which reduce efficiency and may require expensive countermeasures. The lack of information on the geological properties in the target horizon makes it difficult to plan and make the estimates required for decision-making. Due to the depth of the formations, the generally weak information and data situation will not change quickly. In addition to the further development of exploration methods, methods are therefore needed that generate the best possible information about the subsurface and the processes from the available data and take into account the uncertainties of the information obtained due to the limited data available.In this contribution we will present the approaches of a project where this question will be tackled by developing AI methods for accessing and linking existing data sources. The aim of the project is to develop and apply an IT-based concept for the planning of geothermal duplicate systems in northern German aquifers and to predict the influence of geochemical processes on the long-term efficiency of these systems. For this purpose, a digital twin of the subsurface with an assessment of uncertainties is being developed and various coordinated digital tools are being created and combined in an open-source workflow that can be flexibly modified. This is being developed as an example for an existing geothermal power plant, which has been in operation for many years; in particular the geochemical processes that have been investigated for the plant for a long time are being taken into account. The results of the project are intended to support planning and decision-making and make existing process and site knowledge available for more efficient operation of deep geothermal energy.The presentation will give an overview of the project and present initial work.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessThermoOptiPlan: Optimizing Planning and Operation of Geothermal Systems using innovative prediction tools
The use of deep geothermal energy is an important building block in the planned transformation of energy systems. However, the development of new sources, particularly for the pore aquifers in the North German Basin, has not progressed as far as necessary to make a substantial contribution. Decisive obstacles here are, on the one hand, the exploration risk, which essentially results from uncertainties regarding the subsurface properties, as well as larger cost factors that are difficult to calculate during operation, such as scaling effects, which reduce efficiency and may require expensive countermeasures. The lack of information on the geological properties in the target horizon makes it difficult to plan and make the estimates required for decision-making. Due to the depth of the formations, the generally weak information and data situation will not change quickly. In addition to the further development of exploration methods, methods are therefore needed that generate the best possible information about the subsurface and the processes from the available data and take into account the uncertainties of the information obtained due to the limited data available.In this contribution we will present the approaches of a project where this question will be tackled by developing AI methods for accessing and linking existing data sources. The aim of the project is to develop and apply an IT-based concept for the planning of geothermal duplicate systems in northern German aquifers and to predict the influence of geochemical processes on the long-term efficiency of these systems. For this purpose, a digital twin of the subsurface with an assessment of uncertainties is being developed and various coordinated digital tools are being created and combined in an open-source workflow that can be flexibly modified. This is being developed as an example for an existing geothermal power plant, which has been in operation for many years; in particular the geochemical processes that have been investigated for the plant for a long time are being taken into account. The results of the project are intended to support planning and decision-making and make existing process and site knowledge available for more efficient operation of deep geothermal energy.The presentation will give an overview of the project and present initial work.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
A Reactive Transport Modelling Approach for Biogeochemical Transformation in an Agricultural Catchment
The export of nutrients from terrestrial ecosystems is characterized by complex interactions between hydrological transport and biogeochemical transformations, posing considerable challenges to the effective management of water quality and the prediction of climate change. Excess nutrient inputs from agricultural activities into freshwater systems have the potential to impact the safe functioning of ecosystem services, while contributing to greenhouse gas emissions. However, quantification of these coupled processes remains challenging due to the variability in residence time of multiple flow paths and the limited ability to observe hydrological and biogeochemical processes in situ because of the involved long timescales and the inaccessibility of the subsurface. In this study, the catchment-scale hydro-biogeochemical reactive transport model (BioRT-HBV), which is based on a parsimonious structure and has minimal data requirements, is employed to explore the role of different processes in nitrogen reaction rates and concentrations in subsurface waters and rivers. The model uses hydrometeorology, discharge, and stream chemistry data from 2008 to 2023, as well as geological conditions from the Nägelstedt catchment, which is located in central Germany and is recognized as one of its most intensively used agricultural regions. The hydrological model demonstrates a good correlation between simulated and observed stream discharge, with high model efficiency. Snowmelt appears to be an important hydrological factor in regulating the discharge flows at the Nägelstedt catchment, leading to additional surface flow and shallow subsurface flow occur during brief periods corresponding with snowmelt events, while the deep subsurface flow contributes almost 80 percent of the annual discharge. Preliminary results show that high stream nitrate concentrations occur when shallow flowpaths connect the shallower soils to the stream, while low nitrate stream concentrations occur during baseflow and lower-flow conditions, when the stream is predominantly fed by deeper flowpaths, resulting in a flushing concentration-discharge pattern. This suggests that nitrate loss processes are driven by the long-term retention or depletion of nitrogen in soils and groundwater within this catchment. The model provides a foundation for comprehending the interdependence of complex nonlinear biogeochemical and hydrological processes and serves as a step toward the prediction of the impact of climatic perturbation and land use changes on chemical exports to river.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessA Reactive Transport Modelling Approach for Biogeochemical Transformation in an Agricultural Catchment
The export of nutrients from terrestrial ecosystems is characterized by complex interactions between hydrological transport and biogeochemical transformations, posing considerable challenges to the effective management of water quality and the prediction of climate change. Excess nutrient inputs from agricultural activities into freshwater systems have the potential to impact the safe functioning of ecosystem services, while contributing to greenhouse gas emissions. However, quantification of these coupled processes remains challenging due to the variability in residence time of multiple flow paths and the limited ability to observe hydrological and biogeochemical processes in situ because of the involved long timescales and the inaccessibility of the subsurface. In this study, the catchment-scale hydro-biogeochemical reactive transport model (BioRT-HBV), which is based on a parsimonious structure and has minimal data requirements, is employed to explore the role of different processes in nitrogen reaction rates and concentrations in subsurface waters and rivers. The model uses hydrometeorology, discharge, and stream chemistry data from 2008 to 2023, as well as geological conditions from the Nägelstedt catchment, which is located in central Germany and is recognized as one of its most intensively used agricultural regions. The hydrological model demonstrates a good correlation between simulated and observed stream discharge, with high model efficiency. Snowmelt appears to be an important hydrological factor in regulating the discharge flows at the Nägelstedt catchment, leading to additional surface flow and shallow subsurface flow occur during brief periods corresponding with snowmelt events, while the deep subsurface flow contributes almost 80 percent of the annual discharge. Preliminary results show that high stream nitrate concentrations occur when shallow flowpaths connect the shallower soils to the stream, while low nitrate stream concentrations occur during baseflow and lower-flow conditions, when the stream is predominantly fed by deeper flowpaths, resulting in a flushing concentration-discharge pattern. This suggests that nitrate loss processes are driven by the long-term retention or depletion of nitrogen in soils and groundwater within this catchment. The model provides a foundation for comprehending the interdependence of complex nonlinear biogeochemical and hydrological processes and serves as a step toward the prediction of the impact of climatic perturbation and land use changes on chemical exports to river.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Unraveling biogeochemical transformation of organic carbon and nitrogen compounds in groundwater along a hill slope transect
The origin and the fate of organic carbon and nitrogen compounds in groundwater play an important role in the global biogeochemical cycling of carbon and nutrients and have implications for drinking water production. While the input of these compounds into the subsurface is strongly driven by land use, their fate in subsurface environments such as fractured aquifers is controlled by a complex interplay between hydrological and biogeochemical processes at different temporal and spatial scales and is poorly understood yet. Determining the fate of these organic compounds in fractured aquifers is additionally challenging due to spatial heterogeneities at various scales down to centimeter scales, leading to a multitude of flow paths of different lengths and residence times. This causes an overlap of solute residence times for compounds moving from the surface through the subsurface to surface waters or groundwater observation wells, stretching from days to many years, thus affecting the dynamics of the biogeochemical processes and the quantitative assessment of compound fluxes. To address this issue, a travel time-based modeling approach is employed to simulate the fate of carbon and nitrogen compounds in groundwater along a hill slope transect of the Hainich Critical Zone Exploratory (CZE), located northwest of Thuringia (central Germany). This transect is set up under the Collaborative Research Center AQUADIVA. It is subject to an intensive surface and subsurface monitoring program providing groundwater quality and quantity data. Travel time distributions obtained from a numerical groundwater flow model of the transect and its vicinity are combined with a set of numerical 1D simulations describing the biogeochemical transformations of carbon and nitrogen. The simulated complex reaction network describes the transformation of carbon and nitrogen along individual groundwater flow paths, which considers varying microbial functional groups such as aerobes and anaerobes, as well as key microbial life processes under different redox conditions, including aerobic, nitrate-reducing, ammonia-oxidizing, and sulfate-reducing conditions. The model-predicted concentrations of reactive species at various observation wells are compared to measured concentrations to validate the approach. The results show that processes on the surface strongly shape the dynamics of resulting recharge zones represented by different land use areas, which have an impact on observed concentrations at wells. Travel time distributions combined with simulations of the biogeochemical transformation along a flow path can provide a model-based interpretation of measured observations and the factors controlling them. This allows predicting fluxes of chemical species through the entire sub-catchment and their dependency on the dynamics of surface conditions.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessUnraveling biogeochemical transformation of organic carbon and nitrogen compounds in groundwater along a hill slope transect
The origin and the fate of organic carbon and nitrogen compounds in groundwater play an important role in the global biogeochemical cycling of carbon and nutrients and have implications for drinking water production. While the input of these compounds into the subsurface is strongly driven by land use, their fate in subsurface environments such as fractured aquifers is controlled by a complex interplay between hydrological and biogeochemical processes at different temporal and spatial scales and is poorly understood yet. Determining the fate of these organic compounds in fractured aquifers is additionally challenging due to spatial heterogeneities at various scales down to centimeter scales, leading to a multitude of flow paths of different lengths and residence times. This causes an overlap of solute residence times for compounds moving from the surface through the subsurface to surface waters or groundwater observation wells, stretching from days to many years, thus affecting the dynamics of the biogeochemical processes and the quantitative assessment of compound fluxes. To address this issue, a travel time-based modeling approach is employed to simulate the fate of carbon and nitrogen compounds in groundwater along a hill slope transect of the Hainich Critical Zone Exploratory (CZE), located northwest of Thuringia (central Germany). This transect is set up under the Collaborative Research Center AQUADIVA. It is subject to an intensive surface and subsurface monitoring program providing groundwater quality and quantity data. Travel time distributions obtained from a numerical groundwater flow model of the transect and its vicinity are combined with a set of numerical 1D simulations describing the biogeochemical transformations of carbon and nitrogen. The simulated complex reaction network describes the transformation of carbon and nitrogen along individual groundwater flow paths, which considers varying microbial functional groups such as aerobes and anaerobes, as well as key microbial life processes under different redox conditions, including aerobic, nitrate-reducing, ammonia-oxidizing, and sulfate-reducing conditions. The model-predicted concentrations of reactive species at various observation wells are compared to measured concentrations to validate the approach. The results show that processes on the surface strongly shape the dynamics of resulting recharge zones represented by different land use areas, which have an impact on observed concentrations at wells. Travel time distributions combined with simulations of the biogeochemical transformation along a flow path can provide a model-based interpretation of measured observations and the factors controlling them. This allows predicting fluxes of chemical species through the entire sub-catchment and their dependency on the dynamics of surface conditions.
- Open Access
- 28 February 2024
- Published by Wiley in Vadose Zone Journal
- Vol. 23 (2)
Microbial mediated carbon and nitrogen cycling in the spatially heterogeneous vadose zone: A modeling study
Spatially distributed properties of the subsurface result in varying water saturation and preferential flow paths, which lead to heterogeneous solute transport patterns and heterogeneous microbial environments. This, in turn, influences the distribution of nutrients and energy gradients, microbial biomass, and activity thereof. By their very nature, current field sampling techniques do not resolve subsampling scale heterogeneities in microbial biomass and activity, resulting in inaccurate estimates of microbially mediated carbon and nitrogen turnover in the heterogeneous subsurface. Thus, in this study, we undertook a numerical modeling approach to study the impact of spatial heterogeneity on microbially mediated carbon and nitrogen turnover in the vadose zone. We adapted an established biogeochemical process network that captures a variety of respiration pathways, carbon decomposition strategies, and microbial life processes to simulate microbially mediated carbon and nitrogen turnover in variably saturated spatially heterogeneous settings, using an established numerical tool (OGS#BRNS). The fractionation of microbial communities into active and inactive states, as well as immobile and mobile states followed could be linked to the bulk average saturation. Lastly, we identified three reactive systems, distinguished by the rate ratio of aerobic respiration and transfer of oxygen from the air to the water phase, to evaluate the impact of spatial heterogeneity on carbon and nitrogen removal in subsurface heterogeneous domains. Specifically, when this ratio is approximately 1, there is no impact on carbon removal, while when this ratio is very high, then carbon removal decreases as the domain tends to be oxygen limited.
- 28 February 2024
- Published by Wiley in Vadose Zone Journal
- Vol. 23 (2)
Open AccessMicrobial mediated carbon and nitrogen cycling in the spatially heterogeneous vadose zone: A modeling study
Spatially distributed properties of the subsurface result in varying water saturation and preferential flow paths, which lead to heterogeneous solute transport patterns and heterogeneous microbial environments. This, in turn, influences the distribution of nutrients and energy gradients, microbial biomass, and activity thereof. By their very nature, current field sampling techniques do not resolve subsampling scale heterogeneities in microbial biomass and activity, resulting in inaccurate estimates of microbially mediated carbon and nitrogen turnover in the heterogeneous subsurface. Thus, in this study, we undertook a numerical modeling approach to study the impact of spatial heterogeneity on microbially mediated carbon and nitrogen turnover in the vadose zone. We adapted an established biogeochemical process network that captures a variety of respiration pathways, carbon decomposition strategies, and microbial life processes to simulate microbially mediated carbon and nitrogen turnover in variably saturated spatially heterogeneous settings, using an established numerical tool (OGS#BRNS). The fractionation of microbial communities into active and inactive states, as well as immobile and mobile states followed could be linked to the bulk average saturation. Lastly, we identified three reactive systems, distinguished by the rate ratio of aerobic respiration and transfer of oxygen from the air to the water phase, to evaluate the impact of spatial heterogeneity on carbon and nitrogen removal in subsurface heterogeneous domains. Specifically, when this ratio is approximately 1, there is no impact on carbon removal, while when this ratio is very high, then carbon removal decreases as the domain tends to be oxygen limited.
- Open Access
- 1 February 2024
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 17 (2) , 881-898
P3D-BRNS v1.0.0: a three-dimensional, multiphase, multicomponent, pore-scale reactive transport modelling package for simulating biogeochemical processes in subsurface environments
The porous microenvironment of soil offers various environmental functions which are governed by physical and reactive processes. Understanding reactive transport processes in porous media is essential for many natural systems (soils, aquifers, aquatic sediments or subsurface reservoirs) or technological processes (water treatment or ceramic and fuel cell technologies). In particular, in the vadose zone of the terrestrial subsurface the spatially and temporally varying saturation of the aqueous and the gas phase leads to systems that involve complex flow and transport processes as well as reactive transformations of chemical compounds in the porous material. To describe these interacting processes and their dynamics at the pore scale requires a well-suited modelling framework accounting for the proper description of all relevant processes at a high spatial resolution. Here we present P3D-BRNS as a new open-source modelling toolbox harnessing the core libraries of OpenFOAM and coupled externally to the Biogeochemical Reaction Network Simulator (BRNS). The native OpenFOAM volume-of-fluid solver is extended to have an improved representation of the fluid–fluid interface. The solvers are further developed to couple the reaction module which can be tailored for a specific reactive transport simulation. P3D-RBNS is benchmarked against three different flow and reactive transport processes: (1) fluid–fluid configuration in a capillary corner, (2) mass transfer across the fluid–fluid interface and (3) microbial growth with a high degree of accuracy. Our model allows for simulation of the spatio-temporal distribution of all biochemical species in the porous structure (obtained from μ-CT images), for conditions that are commonly found in the laboratory and environmental systems. With our coupled computational model, we provide a reliable and efficient tool for simulating multiphase, reactive transport in porous media.
- 1 February 2024
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 17 (2) , 881-898
Open AccessP3D-BRNS v1.0.0: a three-dimensional, multiphase, multicomponent, pore-scale reactive transport modelling package for simulating biogeochemical processes in subsurface environments
The porous microenvironment of soil offers various environmental functions which are governed by physical and reactive processes. Understanding reactive transport processes in porous media is essential for many natural systems (soils, aquifers, aquatic sediments or subsurface reservoirs) or technological processes (water treatment or ceramic and fuel cell technologies). In particular, in the vadose zone of the terrestrial subsurface the spatially and temporally varying saturation of the aqueous and the gas phase leads to systems that involve complex flow and transport processes as well as reactive transformations of chemical compounds in the porous material. To describe these interacting processes and their dynamics at the pore scale requires a well-suited modelling framework accounting for the proper description of all relevant processes at a high spatial resolution. Here we present P3D-BRNS as a new open-source modelling toolbox harnessing the core libraries of OpenFOAM and coupled externally to the Biogeochemical Reaction Network Simulator (BRNS). The native OpenFOAM volume-of-fluid solver is extended to have an improved representation of the fluid–fluid interface. The solvers are further developed to couple the reaction module which can be tailored for a specific reactive transport simulation. P3D-RBNS is benchmarked against three different flow and reactive transport processes: (1) fluid–fluid configuration in a capillary corner, (2) mass transfer across the fluid–fluid interface and (3) microbial growth with a high degree of accuracy. Our model allows for simulation of the spatio-temporal distribution of all biochemical species in the porous structure (obtained from μ-CT images), for conditions that are commonly found in the laboratory and environmental systems. With our coupled computational model, we provide a reliable and efficient tool for simulating multiphase, reactive transport in porous media.
- Open Access
- 26 January 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 370, 188-198
Apparent isotope effects of reversible enzymatic reactions
- 26 January 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 370, 188-198
Open AccessApparent isotope effects of reversible enzymatic reactions
- Open Access
- 27 September 2022
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 56 (20) , 14427-14438
Spatial Control of Microbial Pesticide Degradation in Soil: A Model-Based Scenario Analysis
Microbial pesticide degraders are heterogeneously distributed in soil. Their spatial aggregation at the millimeter scale reduces the frequency of degrader-pesticide encounter and can introduce transport limitations to pesticide degradation. We simulated reactive pesticide transport in soil to investigate the fate of the widely used herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) in response to differently aggregated distributions of degrading microbes. Four scenarios were defined covering millimeter scale heterogeneity from homogeneous (pseudo-1D) to extremely heterogeneous degrader distributions and two precipitation scenarios with either continuous light rain or heavy rain events. Leaching from subsoils did not occur in any scenario. Within the topsoil, increasing spatial heterogeneity of microbial degraders reduced macroscopic degradation rates, increased MCPA leaching, and prolonged the persistence of residual MCPA. In heterogeneous scenarios, pesticide degradation was limited by the spatial separation of degrader and pesticide, which was quantified by the spatial covariance between MCPA and degraders. Heavy rain events temporarily lifted these transport constraints in heterogeneous scenarios and increased degradation rates. Our results indicate that the mild millimeter scale spatial heterogeneity of degraders typical for arable topsoil will have negligible consequences for the fate of MCPA, but strong clustering of degraders can delay pesticide degradation.
- 27 September 2022
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 56 (20) , 14427-14438
Open AccessSpatial Control of Microbial Pesticide Degradation in Soil: A Model-Based Scenario Analysis
Microbial pesticide degraders are heterogeneously distributed in soil. Their spatial aggregation at the millimeter scale reduces the frequency of degrader-pesticide encounter and can introduce transport limitations to pesticide degradation. We simulated reactive pesticide transport in soil to investigate the fate of the widely used herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) in response to differently aggregated distributions of degrading microbes. Four scenarios were defined covering millimeter scale heterogeneity from homogeneous (pseudo-1D) to extremely heterogeneous degrader distributions and two precipitation scenarios with either continuous light rain or heavy rain events. Leaching from subsoils did not occur in any scenario. Within the topsoil, increasing spatial heterogeneity of microbial degraders reduced macroscopic degradation rates, increased MCPA leaching, and prolonged the persistence of residual MCPA. In heterogeneous scenarios, pesticide degradation was limited by the spatial separation of degrader and pesticide, which was quantified by the spatial covariance between MCPA and degraders. Heavy rain events temporarily lifted these transport constraints in heterogeneous scenarios and increased degradation rates. Our results indicate that the mild millimeter scale spatial heterogeneity of degraders typical for arable topsoil will have negligible consequences for the fate of MCPA, but strong clustering of degraders can delay pesticide degradation.
- Open Access
- 21 September 2022
- Published by Frontiers Media SA in Frontiers in Ecology and Evolution
- Vol. 10
Editorial: Modeling the link between microbial ecology and biogeochemical process dynamics
Editorial: Modeling the link between microbial ecology and biogeochemical process dynamics
- 21 September 2022
- Published by Frontiers Media SA in Frontiers in Ecology and Evolution
- Vol. 10
Open AccessEditorial: Modeling the link between microbial ecology and biogeochemical process dynamics
Editorial: Modeling the link between microbial ecology and biogeochemical process dynamics