Pere Clemente
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pere Clemente has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Jesús Lancis
Universitat Jaume I, Institute of New Imaging Technologies (INIT), Castelló de la Plana, Spain
26 shared publications - Enrique Tajahuerce
Universitat Jaume I
24 shared publications - Fernando Soldevila
GROC-UJI, Institute of New Imaging Technologies (INIT), Universitat Jaume I, E12071 Castelló, Spain
10 shared publications E. Irles
GROC·UJI, Institute of New Imaging Technologies, Universitat Jaume I, 12070 Castelló, Spain
7 shared publications- Lluís Martínez-León
Univ. Jaume I (Spain)
7 shared publications - Vicente Durán
Universitat Jaume I
7 shared publications
Latest Publications
- 24 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10677, 1067715
Vision through turbid media by Fourier filtering and single-pixel detection
We present a novel approach for imaging through turbid media that combines the principles of Fourier spatial filtering with single-pixel imaging. We compare the performance of our single-pixel imaging setup with that of a conventional system. We conclude that the introduction of Fourier gating improves the contrast of images in both cases. Furthermore, we show that single-pixel imaging fits better than conventional imaging in vision through turbid media by Fourier filtering.
- 24 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10677, 1067715
Vision through turbid media by Fourier filtering and single-pixel detection
We present a novel approach for imaging through turbid media that combines the principles of Fourier spatial filtering with single-pixel imaging. We compare the performance of our single-pixel imaging setup with that of a conventional system. We conclude that the introduction of Fourier gating improves the contrast of images in both cases. Furthermore, we show that single-pixel imaging fits better than conventional imaging in vision through turbid media by Fourier filtering.
- 18 January 2016
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Scatter-free imaging through biological tissue
Non-invasive imaging through scattering media is achieved with the use of patterned illumination and single-pixel photodetection.
- 18 January 2016
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Scatter-free imaging through biological tissue
Non-invasive imaging through scattering media is achieved with the use of patterned illumination and single-pixel photodetection.
- Open Access
- 18 September 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 14300
High-resolution adaptive imaging with a single photodiode
During the past few years, the emergence of spatial light modulators operating at the tens of kHz has enabled new imaging modalities based on single-pixel photodetectors. The nature of single-pixel imaging enforces a reciprocal relationship between frame rate and image size. Compressive imaging methods allow images to be reconstructed from a number of projections that is only a fraction of the number of pixels. In microscopy, single-pixel imaging is capable of producing images with a moderate size of 128 × 128 pixels at frame rates under one Hz. Recently, there has been considerable interest in the development of advanced techniques for high-resolution real-time operation in applications such as biological microscopy. Here, we introduce an adaptive compressive technique based on wavelet trees within this framework. In our adaptive approach, the resolution of the projecting patterns remains deliberately small, which is crucial to avoid the demanding memory requirements of compressive sensing algorithms. At pattern projection rates of 22.7 kHz, our technique would enable to obtain 128 × 128 pixel images at frame rates around 3 Hz. In our experiments, we have demonstrated a cost-effective solution employing a commercial projection display.
- 18 September 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 14300
Open AccessHigh-resolution adaptive imaging with a single photodiode
During the past few years, the emergence of spatial light modulators operating at the tens of kHz has enabled new imaging modalities based on single-pixel photodetectors. The nature of single-pixel imaging enforces a reciprocal relationship between frame rate and image size. Compressive imaging methods allow images to be reconstructed from a number of projections that is only a fraction of the number of pixels. In microscopy, single-pixel imaging is capable of producing images with a moderate size of 128 × 128 pixels at frame rates under one Hz. Recently, there has been considerable interest in the development of advanced techniques for high-resolution real-time operation in applications such as biological microscopy. Here, we introduce an adaptive compressive technique based on wavelet trees within this framework. In our adaptive approach, the resolution of the projecting patterns remains deliberately small, which is crucial to avoid the demanding memory requirements of compressive sensing algorithms. At pattern projection rates of 22.7 kHz, our technique would enable to obtain 128 × 128 pixel images at frame rates around 3 Hz. In our experiments, we have demonstrated a cost-effective solution employing a commercial projection display.
- 14 July 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9536, 95360B
Dual collection mode optical microscope with single-pixel detection
In this work we have developed a single-pixel optical microscope that provides both re ection and transmission images of the sample under test by attaching a diamond pixel layout DMD to a commercial inverted microscope. Our system performs simultaneous measurements of re ection and transmission modes. Besides, in contrast with a conventional system, in our single-element detection system both images belong, unequivocally, to the same plane of the sample. Furthermore, we have designed an algorithm to modify the shape of the projected patterns that improves the resolution and prevents the artifacts produced by the diamond pixel architecture.
- 14 July 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9536, 95360B
Dual collection mode optical microscope with single-pixel detection
In this work we have developed a single-pixel optical microscope that provides both re ection and transmission images of the sample under test by attaching a diamond pixel layout DMD to a commercial inverted microscope. Our system performs simultaneous measurements of re ection and transmission modes. Besides, in contrast with a conventional system, in our single-element detection system both images belong, unequivocally, to the same plane of the sample. Furthermore, we have designed an algorithm to modify the shape of the projected patterns that improves the resolution and prevents the artifacts produced by the diamond pixel architecture.
- 9 July 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9541, 95410B
Transillumination imaging through biological tissue by single-pixel detection
One challenge that has long held the attention of scientists is that of clearly seeing objects hidden by turbid media, as smoke, fog or biological tissue, which has major implications in fields such as remote sensing or early diagnosis of diseases. Here, we combine structured incoherent illumination and bucket detection for imaging an absorbing object completely embedded in a scattering medium. A sequence of low-intensity microstructured light patterns is launched onto the object, whose image is accurately reconstructed through the light fluctuations measured by a single-pixel detector. Our technique is noninvasive, does not require coherent sources, raster scanning nor time-gated detection and benefits from the compressive sensing strategy. As a proof of concept, we experimentally retrieve the image of a transilluminated target both sandwiched between two holographic diffusers and embedded in a 6mm-thick sample of chicken breast.
- 9 July 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9541, 95410B
Transillumination imaging through biological tissue by single-pixel detection
One challenge that has long held the attention of scientists is that of clearly seeing objects hidden by turbid media, as smoke, fog or biological tissue, which has major implications in fields such as remote sensing or early diagnosis of diseases. Here, we combine structured incoherent illumination and bucket detection for imaging an absorbing object completely embedded in a scattering medium. A sequence of low-intensity microstructured light patterns is launched onto the object, whose image is accurately reconstructed through the light fluctuations measured by a single-pixel detector. Our technique is noninvasive, does not require coherent sources, raster scanning nor time-gated detection and benefits from the compressive sensing strategy. As a proof of concept, we experimentally retrieve the image of a transilluminated target both sandwiched between two holographic diffusers and embedded in a 6mm-thick sample of chicken breast.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Compressive holography with phase-structured illumination
We describe several approaches to perform digital holography with single-pixel detection by using phase-structured illumination and compressive sensing. Single-pixel imaging works by sampling the scene with micro-structured amplitude patterns implemented onto a spatial light modulator and recording light intensity fluctuation with a simple photodiode. Recently, we have demonstrated the capability of this technique to record digital holograms and to transmit images through scattering media. In this contribution we describe new optical interferometer architectures to record complex amplitude distributions using a simple photodiode by sampling the scene with micro-structured phase patterns. Preliminary experimental results are shown.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Compressive holography with phase-structured illumination
We describe several approaches to perform digital holography with single-pixel detection by using phase-structured illumination and compressive sensing. Single-pixel imaging works by sampling the scene with micro-structured amplitude patterns implemented onto a spatial light modulator and recording light intensity fluctuation with a simple photodiode. Recently, we have demonstrated the capability of this technique to record digital holograms and to transmit images through scattering media. In this contribution we describe new optical interferometer architectures to record complex amplitude distributions using a simple photodiode by sampling the scene with micro-structured phase patterns. Preliminary experimental results are shown.
- Open Access
- 22 May 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (11) , 14424-14433
Compressive imaging in scattering media
One challenge that has long held the attention of scientists is that of clearly seeing objects hidden by turbid media, as smoke, fog or biological tissue, which has major implications in fields such as remote sensing or early diagnosis of diseases. Here, we combine structured incoherent illumination and bucket detection for imaging an absorbing object completely embedded in a scattering medium. A sequence of low-intensity microstructured light patterns is launched onto the object, whose image is accurately reconstructed through the light fluctuations measured by a single-pixel detector. Our technique is noninvasive, does not require coherent sources, raster scanning nor time-gated detection and benefits from the compressive sensing strategy. As a proof of concept, we experimentally retrieve the image of a transilluminated target both sandwiched between two holographic diffusers and embedded in a 6mm-thick sample of chicken breast.
- 22 May 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (11) , 14424-14433
Open AccessCompressive imaging in scattering media
One challenge that has long held the attention of scientists is that of clearly seeing objects hidden by turbid media, as smoke, fog or biological tissue, which has major implications in fields such as remote sensing or early diagnosis of diseases. Here, we combine structured incoherent illumination and bucket detection for imaging an absorbing object completely embedded in a scattering medium. A sequence of low-intensity microstructured light patterns is launched onto the object, whose image is accurately reconstructed through the light fluctuations measured by a single-pixel detector. Our technique is noninvasive, does not require coherent sources, raster scanning nor time-gated detection and benefits from the compressive sensing strategy. As a proof of concept, we experimentally retrieve the image of a transilluminated target both sandwiched between two holographic diffusers and embedded in a 6mm-thick sample of chicken breast.
- 10 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9335, 93350V-93350V-6
Structured illumination enables image transmission through scattering media
- 10 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9335, 93350V-93350V-6
Structured illumination enables image transmission through scattering media
- 9 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9330, 93301O
Resolution analysis in compressive multidimensional microscopy
Despite imaging systems that scan a single-element benefit from mature technology, they suffer from acquisition times linearly proportional to the spatial resolution. A promising option is to use a single-pixel system that benefits from data collection strategies based on compressive sampling. Single-pixel systems also offer the possibility to use dedicated sensors such as a fiber spectrometer for multispectral imaging or a distribution of photodiodes for 3D imaging. The image is obtained by lighting the scene with microstructured masks implemented onto a programmable spatial light modulator. The masks are used as generalized measurement modes where the object information is expressed and the image is recovered through algebraic optimization. The fundamental reason why the bucket detection strategy can outperform conventional optical array detection is the use of a single channel detector that simultaneously integrates all the photons transmitted through the patterned scene. Spatial frequencies that are not transmitted through this low-quality optics are demonstrated to be present in the retrieved image. Our work makes two specific contributions within the field of single-pixel imaging through patterned illumination. First, we demonstrate that single-pixel imaging improves the resolution of conventional imaging systems overcoming the Rayleigh criterion. An analysis of resolution using a low NA microscope objective for imaging at a CCD camera shows that single-pixel cameras are not limited at all by the optical quality of the collection optics. Second, we experimentally demonstrate the capability of our technique to properly recover an image even when an optical diffuser is located in between the sample and the bucket detector.
- 9 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9330, 93301O
Resolution analysis in compressive multidimensional microscopy
Despite imaging systems that scan a single-element benefit from mature technology, they suffer from acquisition times linearly proportional to the spatial resolution. A promising option is to use a single-pixel system that benefits from data collection strategies based on compressive sampling. Single-pixel systems also offer the possibility to use dedicated sensors such as a fiber spectrometer for multispectral imaging or a distribution of photodiodes for 3D imaging. The image is obtained by lighting the scene with microstructured masks implemented onto a programmable spatial light modulator. The masks are used as generalized measurement modes where the object information is expressed and the image is recovered through algebraic optimization. The fundamental reason why the bucket detection strategy can outperform conventional optical array detection is the use of a single channel detector that simultaneously integrates all the photons transmitted through the patterned scene. Spatial frequencies that are not transmitted through this low-quality optics are demonstrated to be present in the retrieved image. Our work makes two specific contributions within the field of single-pixel imaging through patterned illumination. First, we demonstrate that single-pixel imaging improves the resolution of conventional imaging systems overcoming the Rayleigh criterion. An analysis of resolution using a low NA microscope objective for imaging at a CCD camera shows that single-pixel cameras are not limited at all by the optical quality of the collection optics. Second, we experimentally demonstrate the capability of our technique to properly recover an image even when an optical diffuser is located in between the sample and the bucket detector.
- 22 August 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9286, 92864X
Resolution analysis in computational imaging with patterned illumination and single-pixel detection
In computational imaging by pattern projection a sequence of microstructured light patterns codified onto a programmable spatial light modulator is used to sample an object. The patterns are used as generalized measurement modes where the object information is expressed. Our paper makes two specific contributions within the field of single-pixel imaging through patterned illumination. First, we perform an analysis of the optical resolution of the computational image. This resolution is shown not to be limited at all by the optical quality of the collection optics. This result is proved by using a low NA microscope objective for imaging at a CCD camera. Spatial frequencies that are not transmitted through this low quality optics are demonstrated to be present in the retrieved image through patterned illumination. Second, we experimentally demonstrate the capability of our technique to properly recover an image even when an optical diffuser is located in between the sample and the single-pixel detector.
- 22 August 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9286, 92864X
Resolution analysis in computational imaging with patterned illumination and single-pixel detection
In computational imaging by pattern projection a sequence of microstructured light patterns codified onto a programmable spatial light modulator is used to sample an object. The patterns are used as generalized measurement modes where the object information is expressed. Our paper makes two specific contributions within the field of single-pixel imaging through patterned illumination. First, we perform an analysis of the optical resolution of the computational image. This resolution is shown not to be limited at all by the optical quality of the collection optics. This result is proved by using a low NA microscope objective for imaging at a CCD camera. Spatial frequencies that are not transmitted through this low quality optics are demonstrated to be present in the retrieved image through patterned illumination. Second, we experimentally demonstrate the capability of our technique to properly recover an image even when an optical diffuser is located in between the sample and the single-pixel detector.